Structures and Dynamics of Complex Guest Molecules in Confinement, Revealed by Solid-State NMR, Molecular Dynamics, and Calorimetry

This review gives an overview of current trends in the investigation of confined molecules such as water, small and higher alcohols, carbonic acids, ethylene glycol, and non-ionic surfactants, such as polyethylene glycol or Triton-X, as guest molecules in neat and functionalized mesoporous silica materials employing solid-state NMR spectroscopy, supported by calorimetry and molecular dynamics simulations. The combination of steric interactions, hydrogen bonds, and hydrophobic and hydrophilic interactions results in a fascinating phase behavior in the confinement. Combining solid-state NMR and relaxometry, DNP hyperpolarization, molecular dynamics simulations, and general physicochemical techniques, it is possible to monitor these confined molecules and gain deep insights into this phase behavior and the underlying molecular arrangements. In many cases, the competition between hydrogen bonding and electrostatic interactions between polar and non-polar moieties of the guests and the host leads to the formation of ordered structures, despite the cramped surroundings inside the pores.

Solid-state NMR studies of non-ionic surfactants confined in mesoporous silica

This review gives an overview of current trends in the investigation of confined molecules such as higher alcohols, ethylene glycol and polyethylene glycol as guest molecules in neat and functionalized mesoporous silica materials. All these molecules have both hydrophobic and hydrophilic parts. They are characteristic role-models for the investigation of confined surfactants. Their properties are studied by a combination of solid-state NMR and relaxometry with other physicochemical techniques and molecular dynamics techniques. It is shown that this combination delivers unique insights into the structure, arrangement, dynamical properties and the guest-host interactions inside the confinement.

Mesoporous Silica Particles as Drug Delivery Systems-The State of the Art in Loading Methods and the Recent Progress in Analytical Techniques for Monitoring These Processes

Conventional administration of drugs is limited by poor water solubility, low permeability, and mediocre targeting. Safe and effective delivery of drugs and therapeutic agents remains a challenge, especially for complex therapies, such as cancer treatment, pain management, heart failure medication, among several others. Thus, delivery systems designed to improve the pharmacokinetics of loaded molecules, and allowing controlled release and target specific delivery, have received considerable attention in recent years. The last two decades have seen a growing interest among scientists and the pharmaceutical industry in mesoporous silica nanoparticles (MSNs) as drug delivery systems (DDS). This interest is due to the unique physicochemical properties, including high loading capacity, excellent biocompatibility, and easy functionalization. In this review, we discuss the current state of the art related to the preparation of drug-loaded MSNs and their analysis, focusing on the newest advancements, and highlighting the advantages and disadvantages of different methods. Finally, we provide a concise outlook for the remaining challenges in the field.

High-temperature and high-pressure NMR investigations of low viscous fluids confined in mesoporous systems

In this contribution, the relaxation and diffusional behaviors of low viscous fluids, water and methanol confined into mesoporous silica and controlled size pore glass were investigated. The engineered porous systems are relevant to geologically important subsurface energy materials. The engineered porous proxies were characterized by Brunauer–Emmett–Teller (BET) surface analyzer, nuclear magnetic resonance (NMR) spectroscopy, and electron microscopy (EM) to determine surface area, pore-wall protonation and morphology of these materials, respectively. The confined behavior of the low viscous fluids was studied by varying pore diameter, fluid-to-solid ratio, temperature, and pressure, and then compared to bulk liquid state. Both relaxation and diffusion behaviors for the confined fluids showed increasing deviation from pure bulk fluids as the fluid-to-solid ratio was decreased, and surface-to-volume ratio (S/V) was varied. Variable pressure deuteron NMR relaxation of confined D2O and confined methanol, deuterated at the hydroxyl or methyl positions, were performed to exploit the sensitivity of the deuteron quadrupole moment to molecular rotation. The methanol results demonstrated greater pressure dependence than those for water only in bulk. The deviations from bulk liquid behavior arise from different reasons such as confinement and the interactions between confined fluid and the nano-pore wall. The results of the present report give insight into the behavior of low viscosity fluid in nano-confined geometries under different state conditions.

Direct Synthesis of Mesoporous Organosilica and Proof-of-Concept Applications in Lysozyme Adsorption and Supported Catalysis

Mesoporous materials represent a useful alternative for exploiting the effects of confinement on molecular trapping and catalysis. Their efficiency often depends on the interactions between the surface and the targeted molecules. One way to enhance these interactions is to adjust the hydrophobic/hydrophilic balance of the surface. In the case of mesoporous silica, the incorporation of organic groups is an efficient solution to adapt the material for specific applications. In this work, we have used the co-condensation method to control the hydrophobicity of mesoporous organosilica. The obtained materials are methyl- or phenyl-containing silica with a pore size between 3 and 5 nm. The surface chemistry control has shown the enhanced performance of the materials in two proof-of-concept (PoC) applications: lysozyme adsorption and supported catalysis. The lysozyme adsorption is observed to be over 3 times more efficient with the phenyl-functionalized material than MCM-41, due to π-π interactions. For the catalysis, copper(II) was immobilized on the organosilica surface. In this case, the presence of methyl groups significantly enhanced the product yield for the catalyzed synthesis of a triazole derivative; this was attributed to the enhanced hydrophobic surface-reactant interactions. It was also found that the materials have a higher water adsorption capacity and an improved resistance to hydrolysis. The modulation of water properties in confinement with hydrophobic surfaces, consistently with the water as tuneable solvent (WaTuSo) concept, is a crucial aspect in the efficiency of mesoporous materials for dedicated applications.

Small Molecules, Non-Covalent Interactions, and Confinement

This review gives an overview of current trends in the investigation of small guest molecules, confined in neat and functionalized mesoporous silica materials by a combination of solid-state NMR and relaxometry with other physico-chemical techniques. The reported guest molecules are water, small alcohols, and carbonic acids, small aromatic and heteroaromatic molecules, ionic liquids, and surfactants. They are taken as characteristic role-models, which are representatives for the typical classes of organic molecules. It is shown that this combination delivers unique insights into the structure, arrangement, dynamics, guest-host interactions, and the binding sites in these confined systems, and is probably the most powerful analytical technique to probe these systems.

The Influence of Surface Modified Silica Nanoparticles: Properties of Epoxy Nanocomposites

The influence of the surface-modified (CCS) and un-modified (UCS) silica nanoparticles on epoxy nanocomposites were studied. Two different nanocomposites systems were synthesized using tetraethylorthosilicate (TEOS) and 3-(triethoxysilyl) propylamine APTES as a precursor and coupling agent, respectively. In the uncoupled composite system (UCS) the silica particles were solely generated using TEOS as a precursor. The APTES was used as a coupling agent to chemically link the silica (SiO2) particles to the matrix in the coupled composite system (CCS). Both composite systems were fabricated as thin films. The SiO2 epoxy nanocomposites thin films were characterized by Differential Scanning Calorimetry (DSC), RAMAN, Fourier Transform Infra-Red (FT-IR), Scanning Electron Microscopy (SEM) and Thermal Gravimetric (TGA) analysis. RAMAN and FT-IR analysis confirmed the curing of epoxy resin and the generation of the inorganic structural network formation. SEM analysis of these nanocomposites revealed that silica particles were uniformly dispersed in the epoxy matrix. DSC analysis of the nano-composites revealed an increase in glass transition (T g) temperature with the addition of nanofiller. TGA analysis shows enhanced thermal stability of the coupled composite system in comparison to the neat and uncoupled epoxy composite system.

Biofunctionalization of Nano Channels by Direct In-Pore Solid-Phase Peptide Synthesis

Diatom biosilica are highly complex inorganic/organic hybrid materials. To get deeper insights on their structure at a molecular level, model systems that mimic the complex natural compounds were synthesized and characterized. A simple and efficient peptide immobilization strategy was developed, which uses a well-ordered porous silica material as a support and commercially available Fmoc-amino acids, similar to the known solid-phase peptide synthesis. As an example, Fmoc-glycine and Fmoc-phenylalanine are immobilized on the silica support. The success of functionalization was investigated by ¹³ C CP MAS and ²⁹ Si CP MAS solid-state NMR. Thermogravimetric analysis (TGA) and elemental analysis (EA) were performed to quantify the functionalization. Changes of the specific surface area, pore volume, and pore diameters in all modification steps were studied by Brunauer-Emmett-Teller based nitrogen adsorption-desorption measurements (BET). The combination of the analytical methods provided high grafting densities of 2.1±0.2 molecules/nm² on the surface. Furthermore, they allowed for monitoring chemical changes on the pore surface and changes of the pore properties of the material during the different functionalization steps. This universal approach is suitable for the selective synthesis of pores with tunable surface-peptide functionalization, with applications to the synthesis of a big variety of silica-peptide model systems, which in the future may lead to a deeper understanding of complex biological systems.

Properties of Hydrogen-Bonded Liquids at Interfaces

Effects of interfaces on hydrogen-bonded liquids play major roles in nature and technology. Despite their importance, a fundamental understanding of these effects is still lacking. In large parts, this shortcoming is due to the high complexity of these systems, leading to an interference of various interactions and effects. Therefore, it is advisable to take gradual approaches, which start from well designed and defined model systems and systematically increase the level of intricacy towards more complex mimetics. Moreover, it is necessary to combine insights from a multitude of methods, in particular, to link novel preparation strategies and comprehensive experimental characterization with inventive computational and theoretical modeling. Such concerted approach was taken by a group of preparative, experimentally, and theoretically working scientists in the framework of Research Unit FOR 1583 funded by the Deutsche Forschungsgemeinschaft (German Research Foundation). This special issue summarizes the outcome of this collaborative research. In this introductory article, we give an overview of the covered topics and the main results of the whole consortium. The following contributions are review articles or original works of individual research projects.