Block copolymeric biotransport carriers as versatile vehicles for drug delivery

Drug reformulation for a neglected disease. The NANOHAT project to develop a safer more effective sleeping sickness drug

Background

Human African trypanosomiasis (HAT or sleeping sickness) is caused by the parasite Trypanosoma brucei sspp. The disease has two stages, a haemolymphatic stage after the bite of an infected tsetse fly, followed by a central nervous system stage where the parasite penetrates the brain, causing death if untreated. Treatment is stage-specific, due to the blood-brain barrier, with less toxic drugs such as pentamidine used to treat stage 1. The objective of our research programme was to develop an intravenous formulation of pentamidine which increases CNS exposure by some 10–100 fold, leading to efficacy against a model of stage 2 HAT. This target candidate profile is in line with drugs for neglected diseases inititative recommendations.

Methodology

To do this, we evaluated the physicochemical and structural characteristics of formulations of pentamidine with Pluronic micelles (triblock-copolymers of polyethylene-oxide and polypropylene oxide), selected candidates for efficacy and toxicity evaluation in vitro, quantified pentamidine CNS delivery of a sub-set of formulations in vitro and in vivo, and progressed one pentamidine-Pluronic formulation for further evaluation using an in vivo single dose brain penetration study.

Principal Findings

Screening pentamidine against 40 CNS targets did not reveal any major neurotoxicity concerns, however, pentamidine had a high affinity for the imidazoline₂ receptor. The reduction in insulin secretion in MIN6 β-cells by pentamidine may be secondary to pentamidine-mediated activation of β-cell imidazoline receptors and impairment of cell viability. Pluronic F68 (0.01%w/v)-pentamidine formulation had a similar inhibitory effect on insulin secretion as pentamidine alone and an additive trypanocidal effect in vitro. However, all Pluronics tested (P85, P105 and F68) did not significantly enhance brain exposure of pentamidine.

Significance

These results are relevant to further developing block-copolymers as nanocarriers, improving BBB drug penetration and understanding the side effects of pentamidine.

Sleeping sickness or human African Trypanosomiasis (HAT) is a disease caused by a parasite, which is transferred to humans by the bite of an infected tsetse fly. There are two disease stages: the first stage is the blood-based stage of the disease and the second stage affects the brain. It is fatal if left untreated. The blood-brain barrier (BBB) makes the brain stage difficult to treat because it prevents 99% of all drugs from entering the brain from the blood. Those anti-HAT drugs that do enter the brain are toxic and have serious side effects. Pentamidine is a less toxic blood stage drug, which our research has shown has a limited ability to cross the BBB due to its removal by proteins called transporters. The objective of this study was to use Pluronic to improve pentamidine delivery to target sites, whilst reducing its side effects. Pluronic is a polymer, which can assemble into micelles and encapsulate the drug. Thus, prolonging its circulation time and protecting it. Our study indicated that the selected Pluronics did not increase the brain delivery of pentamidine. However. Pluronic-pentamidine formulations were identified that harboured trypanocidal activity and did not increase safety concerns compared to unformulated pentamidine.

Anti-Aβ-scFv-loaded polymeric nano-micelles with enhanced plasma stability

OBJECTIVES

Immunotherapy using recombinant monoclonal antibodies specifically Anti-amyloid-beta (Anti-Aβ) scFv is envisaged as an appropriate therapeutic for Alzheimer through reduction of amyloid-beta aggregation. The solubilization of therapeutics using polymeric micelles facilitates an improved bioavailability and extended blood half-life. In this study, the optimum production condition for Anti-amyloid-beta (Anti-Aβ) scFv was obtained. To increase the stability of plasma, Anti-Aβ-loaded polymeric micelles were synthesized.

METHODS

Escherichia coli SHuffle expression strain was used and purified by Ni-NTA. Pluronics P85 and F127 micelles were used for the Anti-Aβ delivery and were characterized in terms of morphology, drug loading and drug release in phosphate buffer and artificial cerebrospinal fluid. The stability profile was quantified at 4°C over a 30 days storage period. The stability in human plasma was also evaluated.

KEY FINDINGS

Proteins expressed in SHuffle resulted in increased levels of protein expression and solubility. Low critical micelle concentration value and high micelle encapsulation efficiency (<200 nm) achieved via direct dissolution method. Anti-Aβ-loaded micelles were around 2.2-fold more stable than Anti-Aβ in plasma solution. A sustained in-vitro release of Anti-Aβ from micelles was observed.

CONCLUSIONS

Results confirmed that Pluronic-micelles pose benefits as a nano-carrier to increase the stability of Anti-Aβ scFvin in the plasma.

PEO-PPO-PEO Tri-Block Copolymers for Gene Delivery Applications in Human Regenerative Medicine-An Overview

Lineal (poloxamers or Pluronic^®) or X-shaped (poloxamines or Tetronic^®) amphiphilic tri-block copolymers of poly(ethylene oxide) and poly(propylene oxide) (PEO-PPO-PEO) have been broadly explored for controlled drug delivery in different regenerative medicine approaches. The ability of these copolymers to self-assemble as micelles and to undergo sol-to-gel transitions upon heating has endowed the denomination of “smart” or “intelligent” systems. The use of PEO-PPO-PEO copolymers as gene delivery systems is a powerful emerging strategy to improve the performance of classical gene transfer vectors. This review summarizes the state of art of the application of PEO-PPO-PEO copolymers in both nonviral and viral gene transfer approaches and their potential as gene delivery systems in different regenerative medicine approaches.

Tumor-Targeted Accumulation of Ligand-Installed Polymeric Micelles Influenced by Surface PEGylation Crowdedness

With respect to the intriguing biocompatibility and the stealthy functions of poly(ethylene glycol) (PEG), PEGylated nanoparticulates have been intensively engineered for utilities as drug delivery vehicles. To advocate the targeted drug transportation, targeting ligands were strategically installed onto the surface of PEGylated nanoparticulates. The previous in vitro investigations revealed that the ligand-specified cell endocytosis of nanoparticulates was pronounced for the nanoparticulates with adequately high PEG crowdedness. The present study aims to explore insight into the impact of PEGylation degree on in vivo tumor-targeted accumulation activities of cRGD-installed nanoparticulates. The subsequent investigations verified the importance of the PEGylation crowdedness in pursuit of prolonged retention in the blood circulation post intravenous administration. Unprecedentedly, the PEGylation crowdedness was also identified as a crucial important parameter to pursue the tumor-targeted accumulation. A plausible reason is the elevated PEGylation crowdedness eliciting the restricted involvement in nonspecific protein adsorption of nanoparticulates in the biological milieu and consequently pronouncing the ligand-receptor-mediated binding for the nanoparticulates. Noteworthy was the distinctive performance of the class of the proposed systems once utilized for transportation of the mRNA payload to the tumors. The protein expression in the targeted tumors appeared to follow a clear PEGylation crowdedness dependence manner, where merely 2-fold PEGylation crowdedness led to remarkably 10-fold augmentation in protein expression in tumors. Hence, the results provided important information and implications for design of active-targeting PEGylated nanomaterials to fulfill the targeting strategies in systemic applications.

Acid-Labile Surfactants Based on Poly(ethylene glycol), Carbon Dioxide and Propylene Oxide: Miniemulsion Polymerization and Degradation Studies

Partially degradable, nonionic AB and ABA type di- and triblock copolymers based on poly(propylene carbonate) and poly(ethylene glycol) blocks were synthesized via immortal copolymerization of carbon dioxide and propylene oxide, using mPEG or PEG as a macroinitiator, and (R,R)-(salcy)-CoOBzF₅ as a catalyst in a solvent-free one-pot procedure. The amphiphilic surfactants were prepared with molecular weights (M_n) between 2800 and 10,000 g·mol^-¹ with narrow molecular weight distributions (1.03⁻1.09). The copolymers were characterized using ¹H-, ¹³C- and DOSY-NMR spectroscopy and size exclusion chromatography (SEC). Surface-active properties were determined by surface tension measurements (critical micelle concentration, CMC; CMC range: 1⁻14 mg·mL^-¹). Degradation of the acid-labile polycarbonate blocks was investigated in aqueous solution using online ¹H-NMR spectroscopy and SEC. The amphiphilic polymers were used as surfactants in a direct miniemulsion polymerization for poly(styrene) (PS) nanoparticles with mean diameter of 270 to 940 nm. The usage of an acid-triggered precipitation of the emulsion simplified the separation of the particles from the surfactant and purification of the nanoparticles.

Preparation of wormlike polymeric nanoparticles coated with silica for delivery of methotrexate and evaluation of anticancer activity against MCF7 cells

Methotrexate is one of the most effective drugs that is commonly used in the treatment of cancer. However, its application is limited due to low solubility, high toxicity and rapid metabolism. Therefore, in the present study, worm-like polymeric nanoparticles as carrier of methotrexate were prepared using biodegradable copolymers (mPEG–PCL). The impact of nanoparticles’ geometry on the loading, delivery and drug’s anti-cancer activity was investigated. The di-block copolymer mPEG–PCL was being synthesized by a ring opening polymerization of ɛ-caprolactone in the presence of mPEG as the initiator and Sn(oct)2 as the catalyst. It was used for the preparation of worm-like micelles and coated with silica, so that their structures are stable after drying. The synthesized copolymers and nanoparticles were characterized by FTIR, HNMR, GPC, XRD, TGA, DLS, and FE-SEM analyses. The efficiencies of drug loading and release of nanoparticles as in vitro, was studied by high performance liquid chromatography. The MTT method was used to estimate the toxicity on MCF-7 cell category. The obtained results showed that the nanoparticles were worm-like particles with less than 150 nm diameter and about 1 µm length. The loading and encapsulation efficiencies of drug by the worm-like nanoparticles were 3.5 ± 0.14% and 65.6 ± 0.12%, respectively, while they were obtained as 2.1 ± 0.08% and 26 ± 0.10%, respectively, for spherical nanoparticles. The methotrexate diffusional behavior of worm-like nanoparticles was compared with that of the spherical ones. On the other hand, the anti-cancer activity of MTX-loaded nanoparticles was more than the free drug. The results of the MTT assay showed strong and dose-dependent inhibition of cell (MCF-7 category) growth by the nanoparticles compared with MTX. The inhibitory concentrations (IC50 i.e. reduction viability of cell to 50%) obtained for worm-like, spherical nanoparticles and free drug (incubation times 72 h) were 8.25 ± 0.20, 9.15 ± 0.17, 12.28 ± 0.15 µg/mL, respectively. It can be concluded that application of non-spherical nanoparticles is a better and more effective strategy for controlled and slow release of methotrexate in the treatment of cancer.

Controlled PEGylation Crowdedness for Polymeric Micelles To Pursue Ligand-Specified Privileges as Nucleic Acid Delivery Vehicles

A facile poly(ethylene glycol) (PEG) detachment scheme was utilized to control the PEGylation degree of the polymeric micelles. The performance of cyclic Arg-Gly-Asp (cRGD) as a targeted moiety was studied on a class of polymeric micelles with various PEGylation degrees, revealing that the specific cRGD-mediated cell affinity, thus the cellular uptake and implicated privileges including the ligand-specified favorable intracellular trafficking and consequent favorable biofunctions, was prominent for the polymeric micelles with high PEGylation degree. These results endow important information and implications for the design and development of targeted nanomedicine, particularly the delivery of vulnerable biological compounds.

Fluorination of phthalocyanine substituents: Improved photoproperties and enhanced photodynamic efficacy after optimal micellar formulations

A fluorinated phthalocyanine and its non-fluorinated analogue were selected to evaluate the potential enhancement of fluorination on photophysical, photochemical and redox properties as well as on biological activity in cellular and animal models. Due to the pharmacological relevance, the affinity of these phthalocyanines towards biological membranes (logP_ow) as well as their primary interaction with human serum albumin (HSA) or low-density lipoprotein (LDL) were determined. Water-dispersible drug formulation of phthalocyanines via Pluronic^®-based triblock copolymer micelles was prepared to avoid self-aggregation effects and to improve their delivery. The obtained results demonstrate that phthalocyanines incorporation into tunable-polymeric micelles significantly enhanced their cellular uptake and their photocytotoxicity. The improved biodistribution and photodynamic efficacy of the phthalocyanines-triblock copolymer conjugates was also confirmed in vivo in CT26 bearing BALB/c mice. PDT with both compounds led to tumor growth inhibition in all treated animals. Fluorinated phthalocyanine 2 turned out to be the most effective anticancer agent as the tumors of 20% of mice treated regressed completely and did not appear for over one year after treatment.

Perspectives on Polymeric Gene Delivery

Research in the field of nonviral gene delivery is in the initial stages relative to the more commonly known viral systems. However, nonviral systems may, in the near future overcome some of the problems inherent to currently employed viral gene delivery systems. These problems range from limited payload capacity and general production issues to immune and toxic reactions, as well as the potential for catastrophic viral recombination. Self-assembling complexes of nucleic acids and synthetic polymers, commonly referred to as `polyplexes', are formed as the result of electrostatic interactions between the negatively charged phosphate groups of the DNA and the positively charged groups of the polycation. A wide array of polycations are available for such studies, including those with linear, branched, dendritic and block or graft copolymer architectures. These polycations vary greatly in chemical composition as well as the number of repeating units, providing for a wide range of different polyplexes that can be easily assembled. Some of the current gene delivery systems are described which serve as potential reagents in the field of polymer-based gene delivery.

Curcumin and Osteosarcoma: Can Invertible Polymeric Micelles Help?

Systematic review of experimental and clinical data on the use of curcumin in the treatment of osteosarcoma is presented. The current status of curcumin's therapeutic potential against bone cancer is analyzed in regard to using polymeric micelles (including recently developed invertible, responsive, micelles) as a platform for curcumin delivery to treat osteosarcoma. The potential of micellar assemblies from responsive macromolecules in a controlled delivery of curcumin to osteosarcoma cells, and the release using a new inversion mechanism is revealed.

Block copolymers at interfaces: interactions with physiological media

Triblock copolymers (also known as Pluronics or poloxamers) are biocompatible molecules composed of hydrophobic and hydrophilic blocks with different lengths. They have received much attention recently owing to their applicability for targeted delivery of hydrophobic compounds. Their unique molecular structure facilitates the formation of dynamic aggregates which are able to transport lipid soluble compounds. However, these structures can be unstable and tend to solubilize within the blood stream. The use of nanoemulsions as carriers for the lipid soluble compounds appears as a new alternative with improved protection against physiological media. The interfacial behavior of block copolymers is directly related to their peculiar molecular structure and further knowledge could provide a rational use in the design of poloxamer-stabilized nanoemulsions. This review aims to combine the new insights gained recently into the interfacial properties of block copolymers and their performance in nanoemulsions. Direct studies dealing with the interactions with physiological media are also reviewed in order to address issues relating metabolism degradation profiles. A better understanding of the physico-chemical and interfacial properties of block copolymers will allow their manipulation to modulate lipolysis, hence allowing the rational design of nanocarriers with efficient controlled release.

Polymeric micelles as drug delivery vehicles

Though much progress has been made in drug delivery systems, the design of a suitable carrier for the delivery of hydrophobic drugs is still a major challenge for researchers.

Interactions of Pluronic block copolymers with lipid monolayers studied by epi-fluorescence microscopy and by adsorption experiments

The interactions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers, i.e. Pluronics F87, F88 and F127, with monolayers composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) were investigated with different monolayer techniques. Surface pressure-area isotherms were recorded of co-spread Pluronic/lipid mixtures with different Pluronic content to determine the influence of the polymers on the monolayer phase transitions. The squeeze-out pressure of the polymers upon film compression was dependent on the PPO block length. The monolayer compression experiments were coupled with fluorescence microscopy to visualize the phase separation into polymer-rich and lipid-rich domains and to monitor morphological changes of the lipid domains in the monolayer. Extensive phase separation was observed in the coexistence region between liquid-expanded (LE) and liquid-condensed (LC) lipid phases, where pure polymer domains coexisting with round LE-domains containing polymer, and polymer-free LC-domains were seen. We also investigated the adsorption of Pluronics to a lipid monolayer after injecting a polymer solution underneath a pre-formed lipid monolayer by following the change in pressure at constant area. The results show that polymer adsorption is a superposition of two individual processes with different kinetics. Pluronics with a higher hydrophobicity and with a smaller molecular weight adsorb faster and the type and phase state of the lipid determines the surface pressure where no further Pluronic molecules adsorb to the interface. This critical surface pressure depends on the PPO block length, whereas the strength of the interaction with the lipids is determined by the relative PEO content. This indicates that also interactions between the PEO blocks and the lipid headgroup region are occurring. The interactions with the unsaturated lipid POPC in the liquid-expanded phase turn out to be stronger than for lipids in the liquid-condensed phase, where the polymers are excluded.

Oral gene therapy for hypoparathyroidism: a rat model

The use of nonionic polymeric micelles orally to protect and deliver plasmid DNA in vivo was investigated. Parathyroid hormone (PTH)(1-34) gene (179 bp) was inserted into a human cytomegalovirus promoter (PCMV) and E. coli competent cells were used to amplify the cDNA. Polymeric micelle formations (100 microl) formed from PCMV-PTH(1-34) cDNA (7.2 microg/microl) and 6% (w/v) polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO-PPO-PEO) was administered at 8-hr intervals for 48 hr and then at 8-hr intervals for 24 hr weekly for 3 weeks. Parathyroidectomized rats receiving 150 microl of EDTA (10 mM) before each dose of formation served as the study group; rats receiving drinking water, EDTA (10 mM), PCMV-PTH(1-34) cDNA and PCMV-PTH(1-34) cDNA plus EDTA at the same amount and time intervals served as the control groups. Serum levels of calcium and PTH(1-34) were measured weekly for 4 weeks. Immunohistochemical stain for PTH(1-34), reverse transcriptase polymerase chain reaction for PTH(1-34) mRNA and the relative density of PTH(1-34) mRNA were performed at 2 and 4 weeks after oral gene therapy in different organs. One third to three of five rats in the control groups died after parathyroidectomy. Serum levels of calcium and PTH(1-34) were higher in the study than in the control groups. In the study group, positive stain of PTH(1-34) and PTH(1-34) mRNA could be found in those organs. Relative densities of PTH(1-34) mRNA were higher in the study than in the drinking water group in different organs. Oral gene therapy can maintain calcium and PTH(1-34) levels in parathyroidectomized rats.

Binary mixing of micelles using Pluronics for a nano-sized drug delivery system

Pluronics with different structural compositions and properties are used for several applications, including drug delivery systems. We developed a binary mixing system with two Pluronics, L121/P123, as a nano-sized drug delivery carrier. The lamellar-forming Pluronic L121 (0.1 wt%) was incorporated with Pluronic P123 to produce nano-sized dispersions (in case of 0.1 and 0.5 wt% P123) with high stability due to Pluronic P123 and high solubilization capacity due to Pluronic L121. The binary systems were spherical and less than 200-nm diameter, with high thermodynamic stability (at least 2 weeks) in aqueous solution. The CMC of the binary system was located in the middle of the CMC of each polymer. In particular, the solubilization capacity of the binary system (0.1/0.1 wt%) was higher than mono-systems of P123. The main advantage of binary systems is overcoming limitations of mono systems to allow tailored mixing of block copolymers with different physicochemical characteristics. These nano-sized systems may have potential as anticancer drug delivery systems with simple preparation method, high stability, and high loading capacity.

Application of polyhydroxyalkanoates nanoparticles as intracellular sustained drug-release vectors

Polyhydroxybutyrate (PHB), co-polyesters of 3-hydroxybutyrate and 3-hydroxyhexanoate (PHBHHx), and polylactic acid (PLA) were used to prepare nanoparticles with average sizes of 160, 250 and 150 nm, respectively. A lipid-soluble colorant, rhodamine B isothiocyanate (RBITC), was employed to study drug-release behaviors from these nanoparticles. A high RBITC drug-loading efficiency of over 75% was achieved with all PHA nanoparticles prepared. Macrophage endocytosis led to an intracellular RBITC drug sustained release over a period of at least 20 days for PHB and PHBHHx nanoparticles, while PLA nanoparticles and free drug lasted only 15 days and a week, respectively. Polymer properties and particle sizes showed little effect on drug-release behavior. This study showed for the first time that PHB and PHBHHx can be used effectively to achieve intracellular controlled drug releases.

Investigation of the micellar effect of pluronic P85 on P-glycoprotein inhibition: cell accumulation and equilibrium dialysis studies

The objective of this study was: (1) to characterize the P-gp inhibitory effect of different concentrations of Pluronic P85 on anti-HIV-1 drug cellular accumulation, and (2) to investigate the relationship between cellular accumulation and free fraction of drug. Cellular accumulation studies in MDCKII-WT and MDCKII-MDR1 cell monolayers showed a biphasic dose response characterized by decline in accumulation at Pluronic concentrations greater than the CMC. This phenomenon was independent of the inhibition of P-gp efflux by Pluronic. Cell-free equilibrium dialysis was used to determine the effect of Pluronic P85 on drug free fraction and the affinity of Pluronic micelles for drug was modeled. Nelfinavir and saquinavir associated extensively with micelles and equilibrium free fractions were low at P85 concentrations above the CMC, with association constants being in the order nelfinavir > saquinavir >>> abacavir. Abacavir, a P-gp substrate, showed no association with micelles yet showed a biphasic response in cellular accumulation. These data suggest that, above the CMC, inhibition of P-gp is not affected but rather factors such as micellar trapping could contribute to decreased accumulation. Therefore, the in vitro evaluation of the effect of Pluronic formulations on active transport should take into account both the physicochemical properties of drug and the composition of Pluronic.

Block copolymer micelles as delivery vehicles of hydrophobic drugs: Micelle–cell interactions

One-third of drugs in development are water insoluble and one-half fail in trials because of poor pharmacokinetics. Block copolymer micelles are nanosized particles that can solubilize hydrophobic drugs and alter their kinetics in vitro and in vivo. However, block copolymer micelles are not solely passive drug containers that simply solubilize hydrophobic drugs; cells internalize micelles. To facilitate the development of advanced, controlled, micellar drug delivery vehicles, we have to understand the fate of micelles and micelle-incorporated drugs in cells and in vivo. With micelle-based drug formulations recently reaching clinical trials, the impetus for answers is ever so strong and detailed studies of interactions of micelles and cells are starting to emerge. Most notably, the question arises: Is the internalization of block copolymer micelles carrying small molecular weight drugs an undesired side effect or a useful means of improving the effectiveness of the incorporated drugs?

Effect of polymer amphiphilicity on loading of a therapeutic enzyme into protective filamentous and spherical polymer nanocarriers

Rapid clearance and proteolysis limit delivery and efficacy of protein therapeutics. Loading into biodegradable polymer nanocarriers (PNC) might protect proteins, extending therapeutic duration, but loading can be complicated by protein unfolding and inactivation. We encapsulated active enzymes into methoxy-poly(ethylene glycol- block-lactic acid) (mPEG-PLA) PNC with a freeze-thaw double emulsion ( J. Controlled Release 2005, 102 (2), 427-439). On the basis of concepts of amphiphile self-assembly, we hypothesized that the copolymer block ratio that controls spontaneous curvature would influence PNC morphology and loading. We examined PNC yield, shape, stability, loading, activity, and protease resistance of the antioxidant enzyme, catalase. PNC transitioned from spherical to filamentous shapes with increasing hydrophobic polymer fraction, consistent with trends for self-assembly of lower MW amphiphiles. Importantly, one diblock copolymer formed filamentous particles loaded with significant levels of protease-resistant enzyme, demonstrating for the first time encapsulation of an active therapeutic enzyme into filamentous carriers. PNC morphology also greatly influenced its degradation, offering a new means of controlled delivery.

Micellar nanocarriers: pharmaceutical perspectives

Micelles, self-assembling nanosized colloidal particles with a hydrophobic core and hydrophilic shell are currently successfully used as pharmaceutical carriers for water-insoluble drugs and demonstrate a series of attractive properties as drug carriers. Among the micelle-forming compounds, amphiphilic copolymers, i.e., polymers consisting of hydrophobic block and hydrophilic block, are gaining an increasing attention. Polymeric micelles possess high stability both in vitro and in vivo and good biocompatibility, and can solubilize a broad variety of poorly soluble pharmaceuticals many of these drug-loaded micelles are currently at different stages of preclinical and clinical trials. Among polymeric micelles, a special group is formed by lipid-core micelles, i.e., micelles formed by conjugates of soluble copolymers with lipids (such as polyethylene glycol-phosphatidyl ethanolamine conjugate, PEG-PE). Polymeric micelles, including lipid-core micelles, carrying various reporter (contrast) groups may become the imaging agents of choice in different imaging modalities. All these micelles can also be used as targeted drug delivery systems. The targeting can be achieved via the enhanced permeability and retention (EPR) effect (into the areas with the compromised vasculature), by making micelles of stimuli-responsive amphiphilic block-copolymers, or by attaching specific targeting ligand molecules to the micelle surface. Immunomicelles prepared by coupling monoclonal antibody molecules to p-nitrophenylcarbonyl groups on the water-exposed termini of the micelle corona-forming blocks demonstrate high binding specificity and targetability. This review will discuss some recent trends in using micelles as pharmaceutical carriers.

DNA immunization of dairy cows with the clumping factor A of Staphylococcus aureus

Blocking the primary stages of Staphylococcus aureus infection, specifically the bacterial adhesion to cell and the colonization of the mucosal surface, may be the most effective strategy for preventing infections. Clumping factor A (ClfA) is considered to be one of the most important adhesions factors of S. aureus to host cells. The present study describes the immune response of dairy cattle to a DNA vaccine against ClfA and evaluates the ability of specific genetic adjuvants, targeting sequences (granulocyte macrophage colony-stimulating factor and cytotoxic T lymphocyte antigen-4) and transporter molecules (chitosan and copolymer) to modify the immune response of cows. The results show that vaccination of cows with fibrinogen-binding region A induced a strong and specific antibody response to ClfA in comparison with a control group injected with the pCI vector alone. Although the co-expression of both genetic adjuvants and the addition copolymer transporter did not augment the overall antibody response, these approaches decreased the number of non-responsive cows. Chitosan was the only factor that did not enhance the immune response. Three months after the last DNA immunization, three cows from each of the pGM-CSF, internal ribosomal entry site (IRES), pCTLA and pCI groups were injected with 200 microg of recombinant ClfA protein in incomplete Freund's adjuvant. A strong humoral response was observed in all groups following this protein boost, with the response occurring slightly earlier in DNA-primed protein boost cows. Sera and milk samples taken from cows after the second DNA injection or after the protein boost (sera only) were analyzed for their ability to block adherence and increase phagocytosis. Pre-incubation of S. aureus with sera or milk from vaccinated cows significantly reduced the pathogen's ability to adhere to MAC-T cells relative to the sera and milk samples from the pCI-injected control cows. Similarly, pools of sera and milk from vaccinated cows increased phagocytosis of S. aureus by neutrophils. After the protein boost, sera were more efficient promoters of phagocytosis, reflecting the higher anti-ClfA antibody level of these sera. DNA-prime/protein boost regimes combined with molecular adjuvants appeared to be effective in generating a strong immune response to S. aureus antigens in cattle.

Micellar formulations for drug delivery based on mixtures of hydrophobic and hydrophilic Pluronic® block copolymers

Micelles formed by Pluronic block copolymers (PBC) have been studied in multiple applications as drug delivery systems. Hydrophobic PBC form lamellar aggregates with a higher solubilization capacity than spherical micelles formed by hydrophilic PBC. However, they also have a larger size and low stability. To overcome these limitations, binary mixtures from hydrophobic PBC (L121, L101, L81, and L61) and hydrophilic PBC (F127, P105, F87, P85, and F68) were prepared. In most cases, PBC mixtures were not stable, revealing formation of large aggregates and phase separation within 1-2 day(s). However, stable aqueous dispersions of the particles were obtained upon (1). sonication of the PBC mixtures for 1 or 2 min or (2). heating at 70 degrees C for 30 min. Among all combinations, L121/F127 mixtures (1:1% weight ratio) formed stable dispersions with a small particle size. The solubilizing capacity of this system was examined using a model water-insoluble dye, Sudan (III). Mixed L121/F127 aggregates exhibited approximately 10-fold higher solubilization capacity compared to that of F127 micelles. In conclusion, stable aqueous dispersions of nanoscale size were prepared from mixtures of hydrophobic and hydrophilic PBC by using the external input of energy. The prepared mixed aggregates can efficiently incorporate hydrophobic compounds.