Nasal route: an alternative approach for antiemetic drug delivery

Impact of Storage on In Vitro Permeation and Mucoadhesion Setup Experiments Using Swine Nasal Mucosa

Intranasal topical administration offers a promising route for local and systemic drug delivery, with in vitro permeation and mucoadhesion studies often using porcine models. However, the impact of storage on mucosal integrity after the procedure remains unaddressed. This study aimed to standardize the preparation process and evaluated whether storage of porcine nasal mucosa impairs its integrity and permeability for experimental comparisons. Additionally, an optimized in vitro mucoadhesion experiment using texture analyzer equipment was investigated. Porcine nasal mucosa was subjected to different storage conditions ("fresh"; refrigerated at 4°C for 24 h and 48 h, and frozen at -20°C for two or three weeks) and assessed using optical and transmission electron microscopy. In vitro permeation assays were performed in a Franz-type vertical diffusion system with lidocaine hydrochloride (LDC). In vitro mucoadhesion assays were conducted using fresh nasal mucosa and a commercial nasal topical formulation using TA.XT. Plus texture analyzer. The variables involved (probe speed, contact time, and application force) in assessing mucoadhesive capacity (maximum mucoadhesive force Fmax and work of mucoadhesion Wmuc) were optimized using a Central Composite Design. Fresh tissues showed no alterations in histological arrangement or in the ultrastructure of adherence junctions. Stored tissues exhibited histological disorganization, reduced thickness, and loss of epithelial integrity. LDC permeability increased in storage tissues (p < 0.05). Contact force had a positive effect on Fmax and Wmuc (p < 0.0001), with a minimum required value of 0.48 N. Variations in contact time and probe speed did not affect the responses (p > 0.05). In conclusion, the preparation technique was adequate to maintain mucosa integrity for permeability studies. However, storing the mucosa at 4 or -20°C overestimated LDC permeation, which could mislead critical data for formulation development. Therefore, the use of fresh mucosa is recommended to ensure more reliable results. For in vitro mucoadhesion assays, a minimum contact force of 0.48N is required for optimal responses.

A Breath of Fresh Air: Perspectives on Inhaled Nutrients and Bacteria to Improve Human Health

We propose that the human respiratory system and olfactory pathways sequester airborne nutrients (vitamins, fatty acids, and trace minerals) that are beneficial for health, which we term "aeronutrients." In addition, airborne bacteria, termed "aeromicrobes," have the potential for positive health effects by improving species diversity in the microbiotas of the respiratory and gastrointestinal tracts. These concepts have implications for people living in urban areas or those who have limited access to nature, such as astronauts exposed for long periods to highly filtered air that may be depleted of aeronutrients and aeromicrobes. The possibility that fresh air contributes to human nutrition and health may stimulate a re-evaluation of guidelines pertaining to nutrition and access to natural environments, and will open new avenues of scientific enquiry.

Nanotechnological approaches for efficient N2B delivery: from small-molecule drugs to biopharmaceuticals

Central nervous system diseases negatively affect patients and society. Providing successful noninvasive treatments for these diseases is challenging because of the presence of the blood-brain barrier. While protecting the brain's homeostasis, the barrier limits the passage of almost all large-molecule drugs and most small-molecule drugs. A noninvasive method, nose-to-brain delivery (N2B delivery) has been proposed to overcome this challenge. By exploiting the direct anatomical interaction between the nose and the brain, the drugs can reach the target, the brain. Moreover, the drugs can be encapsulated into various drug delivery systems to enhance physicochemical characteristics and targeting success. Many preclinical data show that this strategy can effectively deliver biopharmaceuticals to the brain. Therefore, this review focuses on N2B delivery while giving examples of different drug delivery systems suitable for the applications. In addition, we emphasize the importance of the effective delivery of monoclonal antibodies and RNA and stress the recent literature tackling this challenge. While giving examples of nanotechnological approaches for the effective delivery of small or large molecules from the current literature, we highlight the preclinical studies and their results to prove the strategies' success and limitations.

Ionic liquid-based formulation approaches for enhanced transmucosal drug delivery

The utilization of ionic liquids (ILs) in pharmaceutical drug delivery applications has seen significant expansion in recent years, owing to their distinctive characteristics and inherent adjustability. These innovative compounds can be used to tackle challenges associated with traditional dosage forms, such as polymorphism, inadequate solubility, permeability, and efficacy in topical drug delivery systems. Here, we provide a brief classification of ILs, and their effectiveness in augmenting transmucosal drug delivery approaches by improving the solubility and permeability of active pharmaceutical ingredients (APIs) by temporary mucus modulation aiding the paracellular transport of APIs, prolonging drug retention, and, thus, aiding controlled drug release across various mucosal surfaces. We also highlight potential advances in, and future perspectives of, IL-based formulations in mucosal drug delivery.

Formulation development and evaluation of nasal in situ gel of promethazine hydrochloride

OBJECTIVE

The present work aims to develop mucoadhesive thermosensitive nasal in situ gel for Promethazine hydrochloride using quality by design (QbD) approach. It can reduce nasal mucociliary clearance (MCC) and increase residence of the drug on nasal mucosa. This might increase drug absorption to improve bioavailability of the drug as compared to oral dosage form.

SIGNIFICANCE

Promethazine hydrochloride is an antiemetic drug administered by oral, parenteral and rectal routes. These routes have poor patient compliance or low bioavailability. Nasal route is a better alternative as it has large surface area, high drug absorption rate and no first pass effect. Its only limitation is short drug retention time due to MCC. By formulating a mucoadhesive in situ gel, the MCC can be reduced, and drug absorption will be prolonged. Thus, improving bioavailability.

METHOD

In-situ gel was prepared by cold method having material attributes as concentration of Poloxamer 407 (X1) as gelling agent and hydroxypropyl methyl cellulose K4M (X2) as mucoadhesive agent. Critical Quality Attributes (CQA) were gelation temperature, mucoadhesive force and ex-vivo diffusion. Central composite design (CCD) was adopted for optimization.

RESULT

Optimized formulation satisfied all the CQA significant for nasal administration. Moreover, the formulation was found to be stable in accelerated stability studies for 3 months.

CONCLUSION

It can be concluded that since the drug can easily permeate through nasal mucosa and can gain access directly in the brain without undergoing first pass metabolism along with increased residence due to mucoadhesion, mucoadhesive in situ gel has potential to increase drug bioavailability.

A new approach for the treatment of Alzheimer's disease: insulin-quantum dots

The potential use of insulin supplementation for Alzheimer's Disease (AD) was aimed to investigate and explore CQDs as an alternative delivery system. CQDs were produced by microwave and characterised. Insulin-loaded Ins-CQDs and in-situ Gel-Ins-CQDs were developed. The in vitro release kinetics, penetrations of insulin through excised sheep nasal mucosa were determined. Toxicity of CQDs were calculated on SH-SY5Y cells. The stability and usability of the prepared formulations were assessed. The insulin release from the solution was 70.75% after 3 hours, while it was 37.51% for in-situ Gel-Ins-CQDs. IC50 value was 52 µM. The mean particle diameters of Ins-CQDs and in-situ Gel-Ins-CQDs varied between 8.35 ± 0.19 to 8.75 ± 0.03 nm during a 6-month period. Zeta potentials ranged from -31.51 ± 1.39 to -24.43 ± 0.26 mV, and PDI values were between 9.8 ± 0.01 to 5.3 ± 3.2%(SD, n = 3) for Ins-CQDs and in-situ Gel-Ins-CQDs, respectively.Our results show that Gel-Ins-CQDs represented a controlled release over time and can be used for AD through the nasal route.

Application of Intranasal Administration in the Delivery of Antidepressant Active Ingredients

As a mental disease in modern society, depression shows an increasing occurrence, with low cure rate and high recurrence rate. It has become the most disabling disease in the world. At present, the treatment of depression is mainly based on drug therapy combined with psychological therapy, physical therapy, and other adjuvant therapy methods. Antidepressants are primarily administered peripherally (oral and intravenous) and have a slow onset of action. Antidepressant active ingredients, such as neuropeptides, natural active ingredients, and some chemical agents, are limited by factors such as the blood–brain barrier (BBB), first-pass metabolism, and extensive adverse effects caused by systemic administration. The potential anatomical link between the non-invasive nose–brain pathway and the lesion site of depression may provide a more attractive option for the delivery of antidepressant active ingredients. The purpose of this article is to describe the specific link between intranasal administration and depression, the challenges of intranasal administration, as well as studies of intranasal administration of antidepressant active ingredients.

The Mucoadhesive Nanoparticle-Based Delivery System in the Development of Mucosal Vaccines

Mucosal tissue constitutes the largest interface between the body and the external environment, regulating the entry of pathogens, particles, and molecules. Mucosal immunization is the most effective way to trigger a protective mucosal immune response. However, the majority of the currently licensed vaccines are recommended to be administered by intramuscular injection, which has obvious shortcomings, such as high production costs, low patient compliance, and lack of mucosal immune response. Strategies for eliciting mucosal and systemic immune responses are being developed, including appropriate vaccine adjuvant, delivery system, and bacterial or viral vectors. Biodegradable mucoadhesive nanoparticles (NPs) are the most promising candidate for vaccine delivery systems due to their inherent immune adjuvant property and the ability to protect the antigen from degradation, sustain the release of loaded antigen, and increase the residence time of antigen at the administration site. The current review outlined the complex structure of mucosa, the mechanism of interaction between NPs and mucosa, factors affecting the mucoadhesion of NPs, and the application of the delivery system based on mucoadhesive NPs in the field of vaccines. Moreover, this review demonstrated that the biodegradable and mucoadhesive NP-based delivery system has the potential for mucosal administration of vaccines.

Human Lactobacillus Biosurfactants as Natural Excipients for Nasal drug Delivery of Hydrocortisone

The inclusion of a chemical permeation enhancer in a dosage form is considered an effective approach to improve absorption across the nasal mucosa. Herein we evaluated the possibility of exploiting biosurfactants (BS) produced by Lactobacillus gasseri BC9 as innovative natural excipients to improve nasal delivery of hydrocortisone (HC). BC9-BS ability to improve HC solubility and the BS mucoadhesive potential were investigated using the surfactant at a concentration below and above the critical micelle concentration (CMC). In vitro diffusion studies through the biomimetic membrane PermeaPad® and the same synthetic barrier functionalized with a mucin layer were assessed to determine BC9-BS absorption enhancing properties in the absence and presence of the mucus layer. Lastly, the diffusion study was performed across the sheep nasal mucosa using BC9-BS at a concentration below the CMC. Results showed that BC9-BS was able to interact with the main component of the nasal mucosa, and that it allowed for a greater solubilization and also permeation of the drug when it was employed at a low concentration. Overall, it seems that BC9-BS could be a promising alternative to chemical surfactants in the nasal drug delivery field.

Using the Intranasal Route to Administer Drugs to Treat Neurological and Psychiatric Illnesses: Rationale, Successes, and Future Needs

While the intranasal administration of drugs to the brain has been gaining both research attention and regulatory success over the past several years, key fundamental and translational challenges remain to fully leveraging the promise of this drug delivery pathway for improving the treatment of various neurological and psychiatric illnesses. In response, this review highlights the current state of understanding of the nose-to-brain drug delivery pathway and how both biological and clinical barriers to drug transport using the pathway can been addressed, as illustrated by demonstrations of how currently approved intranasal sprays leverage these pathways to enable the design of successful therapies. Moving forward, aiming to better exploit the understanding of this fundamental pathway, we also outline the development of nanoparticle systems that show improvement in delivering approved drugs to the brain and how engineered nanoparticle formulations could aid in breakthroughs in terms of delivering emerging drugs and therapeutics while avoiding systemic adverse effects.

[Development of Prediction System for Drug Absorption after Intranasal Administration Incorporating Physiologic Functions of Nose -Estimation of in Vivo Drug Permeation through Nasal Mucosa Using in Vitro Membrane Permeability]

The nasal drug application has drawn much attention as the strategy for the delivery route of many drug modalities such as the poorly absorbed drugs, peptides, nucleic acid, and central nervous system drugs. The absorption of drug after intranasal (IN) application depends on the nasal residence time of applied drug, affected by mucociliary clearance (MC). MC is a decisive factor in the nasal absorption of drug. We describe the establishment of in vitro evaluation system of nasal MC via the moving velocity of a marker particle on nasal mucosa, and the development of the pharmacokinetic model to which in vitro parameters on nasal MC was incorporated to enable the prediction of drug absorption after IN application. Moreover, the pharmacokinetics of norfloxacin after IN application was investigated using MC-modified rats pretreated with MC modulators. Nasal absorption fluctuated due to changes in the nasal residence time of drug in response to changes in MC. The prediction system enables quantitative evaluation of changes in drug absorption associated with MC fluctuations. In addition, for a precise prediction system for drug absorption after IN application from the drug absorption model, the relationships between in vitro drug permeability through Calu-3 layers, in vivo transnasal permeation of drug and in vivo bioavailability after IN application were evaluated. The significant correlations between these parameters were obtained, suggesting that transnasal permeability and drug absorption after IN application can be predicted from in vitro membrane permeability.

The uses of resveratrol for neurological diseases treatment and insights for nanotechnology based-drug delivery systems

Neurological disorders have been growing in recent years and are highly prevalent globally. Resveratrol (RES) is a natural product from plant sources such as grape skins. This compound has shown biological activity in many diseases, in particular, those that act on the central nervous system. The mechanism of action and the key points in neurological disorders were described and show the targeted mechanism of action. Due to the insolubility of this compound; the use of nanotechnology-based systems has been proposed for the incorporation of RES and RES-loaded nanocarriers have been designed for intranasal administration, oral or parenteral routes to deliver it to the brain. In general, these nanosystems have shown to be effective in many studies, pharmacological and pharmacokinetic assays, as well as some cell studies. The outcomes show that RES has been reported in human clinical trials for some neurological diseases, although no studies were performed in humans using nanocarriers, animal and/or cellular models have been reported to show good results regarding therapeutics on neurological diseases. Thus, the use of this nutraceutical has shown true for neurological diseases and its loading into nanocarriers displaying good results on the stability, delivery and targeting to the brain.

Stability of extemporaneously compounded amiloride nasal spray

Anxiety disorders (AD) are the most common mental conditions affecting an estimated 40 million adults in the United States. Amiloride, a diuretic agent, has shown efficacy in reducing anxious responses in preclinical models by inhibiting the acid-sensing ion channels (ASIC). By delivering amiloride via nasal route, rapid onset of action can be achieved due to direct "nose-to-brain" access. Therefore, this study reports the formulation, physical, chemical, and microbiological stability of an extemporaneously prepared amiloride 2 mg/mL nasal spray. The amiloride nasal spray was prepared by adding 100 mg of amiloride hydrochloride to 50 mL of sterile water for injection in a sterile reagent bottle. A stability-indicating high-performance liquid chromatography (HPLC) method was developed and validated. Forced-degradation studies were performed to confirm the ability of the HPLC method to identify the degradation products from amiloride distinctively. The physical stability of the amiloride nasal spray was assessed by pH, clarity, and viscosity assessments. For chemical stability studies, samples of nasal sprays stored at room temperature were collected at time-points 0, 3 hr., 24 hr., and 7 days and were assayed in triplicate using the stability-indicating HPLC method. Microbiological stability of the nasal spray solution was evaluated for up to 7 days based on the sterility test outlined in United States Pharmacopoeia (USP) chapter 71. The stability-indicating HPLC method identified the degradation products of amiloride without interference from amiloride. All tested solutions retained over 90% of the initial amiloride concentration for the 7-day study period. There were no changes in color, pH, and viscosity in any sample. The nasal spray solutions were sterile for up to 7 days in all samples tested. An extemporaneously prepared nasal spray solution of amiloride hydrochloride (2 mg/mL) was physically, chemically, and microbiologically stable for 7 days when stored at room temperature.

Nose-to-brain delivery of antipsychotics using nanotechnology: a review

INTRODUCTION

Orally-administered antipsychotics are effective in the management of psychosis-related disorders although generation-specific adverse drug reactions (ADRs) significantly hinder clinical outcomes, driven by issues such as patient non-compliance. Direct nose-to-brain (N2B) delivery of antipsychotics via the olfactory epithelium could avert peripheral ADRs by maximizing cerebral drug concentrations, and reducing drug levels in the periphery. However, there exist physicochemical challenges related to psychotropic drugs, alongside biochemical barriers associated with targeting the olfactory region. Nanotechnological approaches present a viable strategy for the development of intranasal antipsychotic formulations where drug stability, mucosal absorption and cerebrospinal fluid (CSF)-bioavailability can be optimized.

AREAS COVERED

This review explores the unique anatomical features of the nasal cavity as a pathway for antipsychotic drug delivery to the brain. Nanocarrier-based approaches to encapsulate antipsychotics, and enhance stability, absorption and bioavailability are explored. The aim of this review is to determine current knowledge gaps for direct N2B psychotropic drug delivery, and identify clinically acceptable strategies to overcome them.

EXPERT OPINION

The olfactory epithelium may be the most effective and direct administration route for antipsychotic delivery to the central nervous system (CNS). This research is novel and has the potential to revolutionize the mode of delivery of neurological medicines to the CNS in the future.

Performance and toxicity of different absorption enhancers used in the preparation of Poloxamer thermosensitive in situ gels for ketamine nasal administration

The purpose of this study was to investigate the nasal absorption rate and nasal mucosal toxicity of thermosensitive ketamine in situ gels containing various absorption enhancers. The optimal composition ratio for the gel matrix was determined to be 17.2% Poloxamer 407 and 2% Poloxamer 188, as this combination resulted in solutions with a gelation point within the range found in the nasal cavity. Ketamine gels containing the tested enhancers, namely, ethylenediaminetetraacetic acid disodium salt, hydroxypropyl-β-cyclodextrin, propylene glycol, or Tween-80, were compared with enhancer-free counterparts to determine the absorption of the drug, in vivo by measuring its plasma levels in rats and in vitro using a Franz diffusion cell. Moreover, the toxicity of each gel type was assessed by microscopic observation of the morphology of rat nasal mucosa as well as by determining the mobility of the mucosal cilia using an established toad model. The results showed that gels containing hydroxypropyl-β-cyclodextrin could promote the absorption of ketamine without added toxicity compared to enhancer-free gels. Thus, we consider hydroxypropyl-β-cyclodextrin as the most promising absorption enhancer for the nasal administration of ketamine using in situ gels.

In vitro evaluation of a self-emulsifying drug delivery system (SEDDS) for nasal administration of dimenhydrinate

The objective of the study was the development and in vitro characterization of a self-emulsifying drug delivery system (SEDDS) for the nasal application of dimenhydrinate. Final composition of SEDDS was established based on drug solubility and stability studies. Dimenhydrinate was loaded into the SEDDS pre-concentrates to 7.5% (m/v). The droplet size of the final SEDDS formulations was in a range between 60 and 220 nm. Permeability, as well as tissue toxicity, of the formulations was investigated using bovine nasal mucosa. Enhancement in permeation up to 2.8-fold compared to pure dimenhydrinate was confirmed. Furthermore, toxicity studies did not reveal any serious tissue damages related to the SEDDS. Additionally, irritation potential of SEDDS was evaluated in ciliary beat frequency measurements. Incorporation of dimenhydrinate into SEDDS might therefore be considered as a promising approach within the field of nasal delivery of antiemetics by utilizing permeation enhancement strategy.

Strategies for improving diabetic therapy via alternative administration routes that involve stimuli-responsive insulin-delivering systems

The encapsulation of insulin in micro- or nanodelivery systems may eliminate the need for frequent subcutaneous injections, improving the quality of life of diabetic patients. Formulations for oral, intranasal, pulmonary, subcutaneous, and transdermal administration have been developed. The use of stimuli-responsive polymeric carriers that can release the encapsulated drug in response to changes of the environmental stimuli or external activation enables the design of less invasive or non-invasive systems for smart insulin delivery from depots in the body. This article will look at strategies for the development of responsive delivery systems and the future meeting of the demands of new modes of insulin delivery.

Stimuli-responsive graphene-incorporated multifunctional chitosan for drug delivery applications: a review

INTRODUCTION

Recently, the use of chitosan (CS) in the drug delivery has reached an acceptable maturity. Graphene-based drug delivery is also increasing rapidly due to its unique physical, mechanical, chemical, and electrical properties. Therefore, the combination of CS and graphene can provide a promising carrier for the loading and controlled release of therapeutic agents.

AREAS COVERED

In this review, we will outline the advantages of this new drug delivery system (DDS) in association with CS and graphene alone and will list the various forms of these carriers, which have been studied in recent years as DDSs. Finally, we will discuss the application of this hybrid composite in other fields.

EXPERT OPINION

The introducing the GO amends the mechanical characteristics of CS, which is a major problem in the use of CS-based carriers in drug delivery due to burst release in a CS-based controlled release system through the poor mechanical strength of CS. Many related research on this area are still not fully unstated and occasionally they seem inconsistent in spite of the intent to be complementary. Therefore, a sensitive review may be needed to understand the role of graphene in CS/graphene carriers for future drug delivery applications.

Advanced formulations for intranasal delivery of biologics

INTRODUCTION

The global biologics market has been ever increasing over the last decades and is predicted to top Euro 350 by 2020. Facing this scenario, the parenteral route of biologics administration as hitherto standard route is inconvenient for the future. Among the alternatives, the intranasal delivery of therapeutic biologicals seems to be most promising but researchers are still facing challenges as indicated by the scarce number of successfully marketed peptide drugs.

AREAS COVERED

This review article is a compilation of current research focusing on achievements in the field of auxiliary agents for biologics delivery. First, the key benefits of the nose as most promising alternative route of drug administration are highlighted. Then, the potential of the different auxiliary agents in preclinical research is in detail discussed. Moreover, the most used permeation enhancing agents, mucolytic agents, mucoadhesive agents, in situ gelling agents and enzyme inhibiting agents in the formulation of nasal drug delivery systems are described. Thus, the overall purpose of this review is to highlight recent achievements in nasal delivery of biologics and to encourage researchers to work in the direction of needle-free nasal administration of biologics.

EXPERT OPINION

The nasal epithelium is a promising route for biologics administration, which is reflected in a number of well-established products on the market treating chronic diseases as well as a large number of clinical trials currently in progress. The nasal route of drug administration might be a chance to improve therapy of biologics however break-through advances, especially for very complex molecules, such as antibodies, are still needed.

Mucosal Applications of Poloxamer 407-Based Hydrogels: An Overview

Poloxamer 407, also known by the trademark Pluronic^® F127, is a water-soluble, non-ionic triblock copolymer that is made up of a hydrophobic residue of polyoxypropylene (POP) between the two hydrophilic units of polyoxyethylene (POE). Poloxamer 407-based hydrogels exhibit an interesting reversible thermal characteristic. That is, they are liquid at room temperature, but they assume a gel form when administered at body temperature, which makes them attractive candidates as pharmaceutical drug carriers. These systems have been widely investigated in the development of mucoadhesive formulations because they do not irritate the mucosal membranes. Based on these mucoadhesive properties, a simple administration into a specific compartment should maintain the required drug concentration in situ for a prolonged period of time, decreasing the necessary dosages and side effects. Their main limitations are their modest mechanical strength and, notwithstanding their bioadhesive properties, their tendency to succumb to rapid elimination in physiological media. Various technological approaches have been investigated in the attempt to modulate these properties. This review focuses on the application of poloxamer 407-based hydrogels for mucosal drug delivery with particular attention being paid to the latest published works.

Stability of extemporaneously prepared preservative-free prochlorperazine nasal spray

PURPOSE

The stability of an extemporaneously prepared preservative-free prochlorperazine 5-mg/mL nasal spray was evaluated.

METHODS

The preservative-free prochlorperazine nasal spray was prepared by adding 250 mg of prochlorperazine edisylate to 50 mL of citrate buffer in a low-density polyethylene nasal spray bottle. A stability-indicating high-performance liquid chromatography (HPLC) method was developed and validated using the major degradant prochlorperazine sulfoxide and by performing forced-degradation studies. For chemical stability studies, 3 100-μL samples of the preservative-free prochlorperazine from 5 nasal spray bottles stored at room temperature were collected at days 0, 20, 30, 45, and 60 and were assayed in triplicate using the stability-indicating HPLC method. Microbiological testing involved antimicrobial effectiveness testing based on United States Pharmacopeia (USP) chapter 51 and quantitative microbiological enumeration of aerobic bacteria, yeasts, and mold based on USP chapter 61. Samples for microbiological testing were collected at days 0, 30, and 60.

RESULTS

The stability-indicating HPLC method clearly identified the degradation product prochlorperazine sulfoxide without interference from prochlorperazine. All tested solutions retained over 90% of the initial prochlorperazine concentration for the 60-day study period. There were no detectable changes in color, pH, and viscosity in any sample. There was no growth of bacteria, yeast, and mold for 60 days in all samples tested.

CONCLUSION

An extemporaneously prepared preservative-free nasal spray solution of prochlorperazine edisylate 5 mg/mL was physically, chemically, and microbiologically stable for 60 days when stored at room temperature in low-density polyethylene bottles.

Intranasally administered in situ gelling nanocomposite system of dimenhydrinate: preparation, characterization and pharmacodynamic applicability in chemotherapy induced emesis model

The aim of the current manuscript was to test the applicability of a nanocomposite system of penetration enhancer vesicles (PEVs) within polymeric in situ forming gel network composed of poloxamer and hyaluronic acid for the intranasal delivery of the antiemetic dimenhydrinate (DMH). PEVs were prepared using phospholipids and labrasol/transcutol/PEG 400 as penetration enhancers, and characterized for entrapment efficiency (EE%), particle size, zeta potential and morphology. The nanocomposite in situ forming gel system was characterized for its sol-gel temperature, viscosity and mucoadhesiveness, and was pharmacodynamically tested on a cisplatin induced emesis model in rats in terms of food, water, kaolin intake and stomach weight content. The selected PEVs formula displayed EE% of 83% for DMH, particle size of 121 nm and a surface charge of 0.83 mV. The selected nanocomposite in situ gelling formula showed a viscosity of 2.13 Pa.S, mucoadhesive force of 0.62 N and DMH controlled release over 6 hours. The pharmacodynamic study showed the superiority of the nanocomposite in situ gelling formula; being administered at a lower dose than the oral marketed formula. The described nanocomposite system proved to be successful for the intranasal delivery of DMH, thus presenting a promising delivery modality for similar antiemetics.

Nanogold-Gallate Chitosan-Targeted Pulmonary Delivery for Treatment of Lung Cancer

Lung cancer is one of the most of cancer type founds and a leading cause of death worldwide. Through the development of new candidate compound (3,4,5-tribenzyloxybenzoic acid (GAOBn)) and a drug delivery system of our design of quaternized chitosan-gallic acid-folic acid stabilized gold nanoparticles (Au@QCS-GA-FA) as the targeted nanocarrier for treatment of lung cancer, we have found that GAOBn not only showed high cytotoxicity against lung cancer cells (CHAGO) with more than tenfold than cisplatin, but also showed low toxicity against normal cells (CRL-1947). The combination Au@QCS-GA-FA/GAOBn showed highly efficient cellular uptake and localization of gold nanoparticles via the active targeting of cancer cells. This established the potential of Au@QCS-GA-FA as a nanocarrier for anticancer agent-targeted delivery for treatment of lung cancer.

Activity of Multidrug Resistance-Associated Proteins 1-5 (MRP1-5) in the RPMI 2650 Cell Line and Explants of Human Nasal Turbinate

The profound influence of ATP-binding cassette (ABC) transporters on the disposition of numerous drugs has led to increased interest in characterizing their expression profiles in various epithelial and endothelial barriers. The present work examined the presence and functional activity of five ABC efflux proteins, i.e., MRP 1-5, in freshly isolated human nasal epithelial cells and two in vitro models based on the human RPMI 2650 cell line. To evaluate the expression patterns of MRP1, MRP2, MRP3, MRP4, and MRP5 at the mRNA and protein levels in the ex vivo model and the differently cultured RPMI 2650 cells, reverse transcriptase polymerase chain reaction (RT-PCR), Western blot analysis, and indirect immunofluorescence staining were used. The functionality of the MRP transporters in the three models was assessed using efflux experiments and accumulation assays with the respective substrates and inhibitors. The mRNA and protein expression of all selected ABC transporters was detected in excised human nasal mucosa as well as in the corresponding cell culture models. Moreover, the functional expression of the MRP transport proteins was demonstrated in the three models for the first time. Therefore, the potential impact of multidrug resistance-associated proteins 1-5 on drug disposition after intranasal administration may be taken into consideration for future developments. The specimens of human nasal turbinate exhibited slightly lower efflux capacities of MRP1, MRP3, and MRP5 in relation to the submerged and ALI-cultured RPMI 2650 cells, but showed a promising comparability to both in vitro models concerning the activity of MRP2 and MRP4. In this regard, the different RPMI 2650 cell culture models will be able to provide useful experimental data in the preclinical phase to estimate the interaction of particular efflux transporters with drug candidates for nasal application.

Expression of P-glycoprotein in excised human nasal mucosa and optimized models of RPMI 2650 cells

To assess the transmucosal drug transport in the development of medications for intranasal administration, cellular in vitro models are preferred over the use of animal tissues due to inter-species variations and ethical concerns. With regard to the distribution of active agents and multidrug resistance, the ABC transporter P-glycoprotein plays a major role in several mammalian tissues. The present study compares the expression of this efflux pump in optimized in vitro models based on the human RPMI 2650 cell line with specimens of human turbinate mucosa. The presence of the ABCB1 gene was investigated at the mRNA and protein levels using RT-PCR and Western blot analysis in differently cultured RPMI 2650 cells and excised human nasal epithelium. Furthermore, the localization and activity of P-gp was examined by immunohistochemical staining and functionality assays using different substrates in both in vitro and ex vivo models. Both mRNA and protein expression of P-gp was found in all studied models. Furthermore, transporter functionality was detected in both RPMI 2650 cell culture models and excised human mucosa. The results demonstrated a highly promising comparability between RPMI 2650 models and explants of human nasal tissue concerning the influence of MDR1 on drug disposition. The RPMI 2650 cell line might become a useful tool in preclinical trials to improve reproducibility and achieve greater applicability to humans of experimental data regarding passive diffusion and active efflux of drug candidates.

A permeation enhancer for increasing transport of therapeutic macromolecules across the intestine

Delivery of therapeutic macromolecules is limited by the physiological limitations of the gastrointestinal tract including poor intestinal permeability, low pH and enzymatic activity. Several permeation enhancers have been proposed to enhance intestinal permeability of macromolecules; however their utility is often hindered by toxicity and limited potency. Here, we report on a novel permeation enhancer, Dimethyl palmitoyl ammonio propanesulfonate (PPS), with excellent enhancement potential and minimal toxicity. PPS was tested for dose- and time-dependent cytotoxicity, delivery of two model fluorescent molecules, sulforhodamine-B and FITC-insulin in vitro, and absorption enhancement of salmon calcitonin (sCT) in vivo. Caco-2 studies revealed that PPS is an effective enhancer of macromolecular transport while being minimally toxic. TEER measurements in Caco-2 monolayers confirmed the reversibility of the effect of PPS. Confocal microscopy studies revealed that molecules permeate via both paracellular and transcellular pathways in the presence of PPS. In vivo studies in rats showed that PPS enhanced relative bioavailability of sCT by 45-fold after intestinal administration. Histological studies showed that PPS does not induce damage to the intestine. PPS is an excellent permeation enhancer which provides new opportunities for developing efficacious oral/intestinal delivery systems for therapeutic macromolecules.

Advancement in stimuli triggered in situ gelling delivery for local and systemic route

INTRODUCTION

Current research efforts focused on the design and evaluation of drug delivery systems that are easy to administer require decreased administration frequency, and provide sustained drug release in order to increase clinical efficacy and compliance of the patients. The gel forming smart polymeric formulations offer numerous applications resemble sustained and prolonged action in contrast to conventional drug delivery systems.

AREAS COVERED

Article summarizes type of bioactive, sol-gel triggering factors, dose, rationales, and polymers involved in gelation with respect to their route of administration. A lot of work has been done with smart polymeric gelling system taking the advantage of stimuli (temperature and pH) triggered sol-gel phase-transition in the administered area that have great prospective in biomedical and pharmaceutical applications, particularly in target-specific controlled drug delivery systems.

EXPERT OPINION

Although the principle of gelation is so attractive, key issues remain to be solved which include (i) variability of the drug release, (ii) avoidance of burst release in case of depot formulation, and (iii) issues related to toxicity. Unfortunately, till now area concerning the detailed processes of the gelling formation is still not much explored. Despite this proclamation, many efforts are made in industry and institutions to improve concerned approaches. New materials and approaches enter the preclinical and clinical phases and one can be sure that this strategy will gain further clinical importance within the next years. Thus, this review article will assuredly serve as an informative tool for the innovators working in the concern area.