Potentials and challenges in self-nanoemulsifying drug delivery systems

Augmentation of antifungal activity of fluconazole using a clove oil nanoemulgel formulation optimized by factorial randomized D-optimal design

In the present study, fluconazole (FLU) showed the highest solubility in clove oil and was selected as the oil phase for the FLU-loaded nanoemulsion (FLU-NE). Among the studied cosurfactants, Labrafac was better than ethanol at providing globules with acceptable sizes and a lower polydispersity index (PDI) when Tween 80 was the surfactant. This optimized FLU-NE was thermodynamically stable. Furthermore, FLU-NE stored at 40 ± 2 °C and 75 ± 5% relative humidity for 6 months demonstrated good stability. The FLU-NE was converted to a FLU-loaded nanoemulsion gel (FLU-NEG) using 2% w/v sodium carboxymethyl cellulose. The FLU-NEG was acceptable in terms of visual appearance and spreadability. Rheological studies revealed pseudoplastic behavior for FLU-NEG. The viscosity of FLU-NEG decreased when the applied rpm was increased. FLU-NEG showed greater drug release than that from a FLU-GEL formulation. Furthermore, the FLU release from FLU-NEG followed the Higuchi model. The results from the in vitro antifungal evaluation of FLU-NEG on Candida albicans ATCC 76615 strain confirmed the increase in the antifungal activity of FLU by clove oil. Significant differences were observed in the zones of inhibition produced by FLU-NEG compared to those produced by the blank nanoemulsion gel (B-NEG), fluconazole suspension (FLU-SUS), and nystatin samples. Thus, the increase in the antifungal activity of FLU using clove oil as the oil phase in its nanoemulsion formulation was quite evident from our results. Therefore, the developed FLU-NEG could be considered a potential candidate for further preclinical and clinical studies.

Demystifying the Potential of Embelin-Loaded Nanoformulations: a Comprehensive Review

Phytoconstituent based therapies have the potential to reduce the adverse effects and enhance overall patient compliance for different diseased conditions. Embelin (EMB) is a natural compound extracted from Embelia ribes that has demonstrated high therapeutic potential, particularly as anti-inflammatory and anticancer therapeutic applications. However, its poor water solubility and low oral bioavailability limitations make it challenging to use in biomedical applications. Nanostructure-based novel formulations have shown the potential to improve physicochemical and biological characteristics of active pharmaceutical ingredients obtained from plants. Different nanoformulations that have been utilized to encapsulate/entrap EMB for various therapeutic applications are nanoliposomes, nanostructured lipid carriers, niosomes, polymeric nanoparticles, nanosuspensions, phytosomes, self nanoemulsifying drug delivery system, silver nanoparticles, microparticles, solid lipid nanoparticle, gold nanoparticles and nanomicelles. The common methods reported for the preparation of EMB nanoformulations are thin film hydration, nanoprecipitation, ethanol injection, emulsification followed by sonication. The size of nanoformulations ranged in between 50 and 345 nm. In this review, the mentioned EMB loaded nanocarriers are methodically discussed for size, shape, drug entrapment, zeta potential, in vitro release & permeation and in vivo studies. Potential of EMB with other drugs (dual drug approach) incorporated in nanocarriers are also discussed (physicochemical and preclinical characteristics). Patents related to EMB nanoformulations are also presented which showed the clinical translation of this bioactive for future utilization in different indications.

A Novel Semi-Solid Self-Emulsifying Formulation of Aprepitant for Oral Delivery: An In Vitro Evaluation

Aprepitant is the first member of a relatively new antiemetic drug class called NK₁ receptor antagonists. It is commonly prescribed to prevent chemotherapy-induced nausea and vomiting. Although it is included in many treatment guidelines, its poor solubility causes bioavailability issues. A particle size reduction technique was used in the commercial formulation to overcome low bioavailability. Production with this method consists of many successive steps that cause the cost of the drug to increase. This study aims to develop an alternative, cost-effective formulation to the existing nanocrystal form. We designed a self-emulsifying formulation that can be filled into capsules in a melted state and then solidified at room temperature. Solidification was achieved by using surfactants with a melting temperature above room temperature. Various polymers have also been tested to maintain the supersaturated state of the drug. The optimized formulation consists of Capryol^TM 90, Kolliphor^® CS20, Transcutol^® P, and Soluplus^®; it was characterized by DLS, FTIR, DSC, and XRPD techniques. A lipolysis test was conducted to predict the digestion performance of formulations in the gastrointestinal system. Dissolution studies showed an increased dissolution rate of the drug. Finally, the cytotoxicity of the formulation was tested in the Caco-2 cell line. According to the results, a formulation with improved solubility and low toxicity was obtained.

Compound Nanoemulsion Combined with Differentiation/Cytotoxicity Drugs for Modulating Breast Cancer Stemness

Breast cancer stem cells (BCSCs) are the culprit of triple-negative breast cancer invasiveness and are heterogeneous. It is recognized that the combination of chemotherapy and differentiation therapy for killing BCSCs and non-BCSCs simultaneously is a reliable strategy. In this study, an oil-in-water nanoemulsion was prepared by high-pressure homogenization with coencapsulation of all-trans retinoic acid (ATRA) and doxorubicin (DOX). The preparation process was simple, and the production was easy to scale up. The particle size of the nanoemulsion was 127.2 ± 2.0 nm. Cellular toxicity assay showed that the composite index of the ATRA and DOX was less than 1 and exhibited a fine combined effect. In vivo antitumor efficacy showed that the compound nanoemulsion could reduce the proportion of BCSCs to 1.18% by inhibiting the expression of Pin1. In addition, the combination of ATRA and DOX could reduce the cardiotoxicity of DOX and had higher safety. Hopefully, this work can provide a new insight into developing pharmaceutically acceptable technology for treating BCSCs.

Self-nanoemulsifying drug delivery systems (SNEDDS) of anti-cancer drugs: a multifaceted nanoplatform for the enhancement of oral bioavailability

OBJECTIVE

A significant problem faced by the health care industry today is that though there are numerous drugs available to tackle diseases like cancer, their intrinsic properties make it difficult to be delivered to patients in a feasible manner. One of the key players that have helped researchers overcome poor solubility and permeability of drugs is Nanotechnology, this article further iterates on the same.

SIGNIFICANCE

Nanotechnology is used as an umbrella term in pharmaceutics and describes under it multiple technologies. Upcoming nanotechnology is a Self Nanoemulsifying System which is considered to be a futuristic delivery system both due to its scientific simplicity and relative ease of patient delivery.

METHODS

Self-Nano Emulsifying Drug Delivery Systems (SNEDDS) are homogenous lipidic concoctions containing the drug solubilized in the oil phase and surfactants. The choice of components depends on the physicochemical properties of the drugs, the solubilization capability of oils and the physiological fate of the drug. The article contains further details of various methodologies that have been adopted by scientists to formulate and optimize such systems in order to make anticancer drugs orally deliverable.

RESULTS

The results that have been generated by scientists across the globe have been summarized in the article and all of the data supports the claim that SNEDDS significantly enhance the solubility and bioavailability of hydrophobic anticancer drugs.

CONCLUSIONS

This article mainly provides the application of SNEDDS in cancer therapy and concludes to provide a step for the oral administration of several BCS class II and IV anticancer drugs.

The Trend of Organic Based Nanoparticles in the Treatment of Diabetes and Its Perspectives

Diabetes is an untreatable metabolic disorder characterized by alteration in blood sugar homeostasis, with submucosal insulin therapy being the primary treatment option. This route of drug administration is attributed to low patient comfort due to the risk of pain, distress, and local inflammation/infections. Nanoparticles have indeed been suggested as insulin carriers to allow the drug to be administered via less invasive routes other than injection, such as orally or nasally. The organic-based nanoparticles can be derived from various organic materials (for instance, polysaccharides, lipids, and so on) and thus are prevalently used to enhance the physical and chemical consistency of loaded bioactive compounds (drug) and thus their bioavailability. This review presents various forms of organic nanoparticles (for example, chitosan, dextron, gums, nanoemulsion, alginate, and so on) for enhanced hypoglycemic drug delivery relative to traditional therapies.

A Scoping Review of the Skeletal Effects of Naringenin

BACKGROUND

Osteoporosis is caused by the deterioration of bone density and microstructure, resulting in increased fracture risk. It transpires due to an imbalanced skeletal remodelling process favouring bone resorption. Various natural compounds can positively influence the skeletal remodelling process, of which naringenin is a candidate. Naringenin is an anti-inflammatory and antioxidant compound found in citrus fruits and grapefruit. This systematic review aims to present an overview of the available evidence on the skeletal protective effects of naringenin.

METHOD

A systematic literature search was conducted using the PubMed and Scopus databases in August 2022. Original research articles using cells, animals, or humans to investigate the bone protective effects of naringenin were included.

RESULTS

Sixteen eligible articles were included in this review. The existing evidence suggested that naringenin enhanced osteoblastogenesis and bone formation through BMP-2/p38MAPK/Runx2/Osx, SDF-1/CXCR4, and PI3K/Akt/c-Fos/c-Jun/AP-1 signalling pathways. Naringenin also inhibited osteoclastogenesis and bone resorption by inhibiting inflammation and the RANKL pathway.

CONCLUSIONS

Naringenin enhances bone formation while suppressing bone resorption, thus achieving its skeletal protective effects. It could be incorporated into the diet through fruit intake or supplements to prevent bone loss.

Pharmaceutical prospects of biosurfactants produced from fungal species

The development of novel types of biogenic surface-active compounds is of greater interest for combating many diseases and infections. In this respect research and development of biosurfactant has gained immense importance. Substantially, biosurfactant is defined as a class of active amphiphilic chemical compounds that comprise hydrophobic and hydrophilic moieties on their surfaces. It is generally known that many kinds of microorganisms can be used to produce these surfactants or surface-active compounds. Hosting interesting features such as biodegradability, emulsifying/de-emulsifying capacity, low toxicity, and antimicrobial activities; these amphiphilic compounds in recent years have flourished as an ideal replacement for the chemically synthesized surfactant, and also have various commercial attractions. Both bacteria and fungi are the producers of these amphiphilic molecules; however, the pathogenicity of certain bacterial strains has caused a shift in interest toward fungi. Therefore, various fungi species have been reported for the production of biosurfactants amongst which Candida species have been the most studied strains. Biosurfactants uphold desired properties like antibacterial, antifungal, antiviral, antiadhesion, and anticancer activity which proves them an ideal candidate for the application in various fields like pharmaceutical, gene therapy, medical insertion safety, immunotherapy to fight against many chronic diseases, and so forth. Hence, this review article discusses the pharmaceutical prospects of biosurfactants produced from different fungal species, providing new directions toward the discovery and development of molecules with novel structures and diverse functions for advanced application in the medical field.

Development of a safe pediatric liquisolid self-nanoemulsifying system of triclabendazole for the treatment of fascioliasis

Fascioliasis, a common parasitic infection observed in the pediatric patient population, is a leading cause of concern in countries with poor/unhealthy water resources. To treat this condition first line agent such as triclabendazole (TBZ) has been the choice therapy. However, there is a major hurdle in exploiting TBZ. Characterized with poor aqueous solubility (0.1 mg/L), its solubility has been the rate limiting factor, rendering requirement of large doses of TBZ. To address the same, the focus of the current study was to develop a self-nano emulsifying drug delivery system (TBZ-SNEDDS) for TBZ and developing dose customizable pediatric dispersible color-coded tablets. TBZ-SNEDDS were successfully formulated by using Kolliphor®EL, as a surfactant, a lipid phase of medium chain triglyceride and α-tocopherol in the ratio of (1:1), with dimethylacetamide (DMA) as a solvent. It was observed during in vitro release studies that there was a significant effect of fed conditions on the rate of TBZ release from the formulation. greater than 85 % TBZ was observed to release in fed conditions in comparison to fasted conditions. As currently TBZ is prescribed on a weight-based dosage regimen, it is imperative to develop a dose-customizable fast dissolving pediatric formulation. Hence, TBZ-SNEDDS could prove to be pivotal in helping countless children around the world in desperate conditions to get cheap yet effective therapy.

Functional Excipients and Novel Drug Delivery Scenario in Self-nanoemulsifying Drug Delivery System: A Critical Note

Lipid-based formulations have emerged as prospective dosage forms for extracting the therapeutic effects of existing lipophilic compounds and novel chemical entities more efficiently. Compared to other excipients, lipids have the added benefit of enhancing the bioavailability of lipophilic and highly metabolizable drugs due to their unique physicochemical features and similarities to in vivo components. Furthermore, lipids can minimize the needed dose and even the toxicity of drugs with poor aqueous solubility when employed as the primary excipient. Hence, the aim of the present review is to highlight the functional behavior of lipid excipients used in SNEDD formulation along with the stability aspects of the formulation in vivo. Moreover, this review also covered the importance of SNEDDS in drug delivery, the therapeutic and manufacturing benefits of lipids as excipients, and the technological advances made so far to convert liquid to solid SNEDDS like melt granulation, adsorption on solid support, spray cooling, melt extrusion/ spheronization has also highlighted. The mechanistic understanding of SNEDD absorption in vivo is highly complex, which was discussed very critically in this review. An emphasis on their application and success on an industrial scale was presented, as supported by case studies and patent surveys.

Self-Emulsifying Drug Delivery Systems (SEDDS): Measuring Energy Dynamics to Determine Thermodynamic and Kinetic Stability

This research was designed to identify thermodynamically and kinetically stable lipidic self-emulsifying formulations through simple energy dynamics in addition to highlighting and clarifying common ambiguities in the literature in this regard. Proposing a model study, this research shows how most of the professed energetically stable systems are actually energetically unstable, subjected to indiscriminate and false characterization, leading to significant effects for their pharmaceutical applications. A self-emulsifying drug delivery system (SEDDS) was developed and then solidified (S-SEDDS) using a model drug finasteride. Physical nature of SEDDS was identified by measuring simple dynamics which showed that the developed dispersion was thermodynamically unstable. An in vivo study of albino rats showed a three-fold enhanced bioavailability of model drug with SEDDS as compared to the commercial tablets. The study concluded that measuring simple energy dynamics through inherent properties can distinguish between thermodynamically stable and unstable lipidic systems. It might lead to correct identification of a specific lipidic formulation and the application of appropriate characterization techniques accordingly. Future research strategies include improving their pharmaceutical applications and understanding the basic differences in their natures.

Synthesis, Nanoformulations, and In Vitro Anticancer Activity of N-Substituted Side Chain Neocryptolepine Scaffolds

The naturally occurring neocryptolepine (5-Methylindolo [2,3-b]quinoline) and its analogs exhibited prominent anticancer and antimalarial activity. However, the main problem of this class of compounds is their poor aqueous solubility, hampering their bioavailability and preventing their clinical development. To overcome the problem of insolubility and to improve the physicochemical and the pharmacological properties of 5-Methylindolo [2,3-b]quinoline compounds, this work was designed to encapsulate such efficient medical compounds into mesoporous silica oxide nanoemulsion (SiO₂NPs). Thus, in this study, SiO₂NPs was loaded with three different concentrations (0.2 g, 0.3, and 0.6 g) of 7b (denoted as NPA). The findings illustrated that the nanoparticles were formed with a spherical shape and exhibited small size (less than 500 nm) using a high concentration of the synthesized chemical compound (NPA, 0.6 g) and good stabilization against agglomeration (more than -30 mv). In addition, NPA-loaded SiO₂NPs had no phase separation as observed by our naked eyes even after 30 days. The findings also revealed that the fabricated SiO₂NPs could sustain the release of NPA at two different pH levels, 4.5 and 7.4. Additionally, the cell viability of the produced nanoemulsion system loaded with different concentrations of NPA was greater than SiO₂NPs without loading, affirming that NPA had a positive impact on increasing the safety and cell viability of the whole nanoemulsion. Based on these obtained promising data, it can be considered that the prepared NPA-loaded SiO₂NPs seem to have the potential for use as an effective anticancer drug nanosystem.

Nanomedicine based approaches for combating viral infections

Millions of people die each year from viral infections across the globe. There is an urgent need to overcome the existing gap and pitfalls of the current antiviral therapy which include increased dose and dosing frequency, bioavailability challenges, non-specificity, incidences of resistance and so on. These stumbling blocks could be effectively managed by the advent of nanomedicine. Current review emphasizes over an enhanced understanding of how different lipid, polymer and elemental based nanoformulations could be potentially and precisely used to bridle the said drawbacks in antiviral therapy. The dawn of nanotechnology meeting vaccine delivery, role of RNAi therapeutics in antiviral treatment regimen, various regulatory concerns towards clinical translation of nanomedicine along with current trends and implications including unexplored research avenues for advancing the current drug delivery have been discussed in detail.

Lipid-based emulsion drug delivery systems - a comprehensive review

Lipid-based emulsion system - a subcategory of emulsion technology, has emerged as an enticing option to improve the solubility of the steadily rising water-insoluble candidates. Along with enhancing solubility, additional advantages such as improvement in permeability, protection against pre-systemic metabolism, ease of manufacturing, and easy to scale-up have made lipid-based emulsion technology very popular among academicians and manufacturers. The present article provides a comprehensive review regarding various critical properties of lipid-based emulsion systems, such as microemulsion, nanoemulsion, SMEDDS (self microemulsifying drug delivery system), and SNEDDS (self nanoemulsifying drug delivery system). The present article also explains in detail the similarities and differences between them, the stabilization mechanism, methods of preparation, excipients used to prepare them, and evaluation techniques. Subtle differences between nearly related terminologies such as microemulsion and nanoemulsion, SMEDDS, and SNEDDS are also explained in detail to clarify the basic differences. The present article also gives in-depth information regarding the chemical structure of various lipidic excipients, various possible chemical modifications to modify their inherent properties, and their regulatory status for rational selection.

Optimization of Thymoquinone-Loaded Self-Nanoemulsion for Management of Indomethacin-Induced Ulcer

To improve the water solubility of thymoquinone (TQ), a major constituent of Nigella sativa seed oil, a TQ-loaded self-nanoemulsifying drug delivery system (SNEDDS) was prepared. The SNEDDS formulation was optimized using almond oil (AO) (Oil; X1), tween 80 (surfactant; X2) and polyethylene glycol 200 (PEG 200) (cosurfactant; X3) compounds as independent variables. The results showed that the globule size ranged from 65 to 320 nm. In addition, a strong agreement was reached between the system estimation and the experimental values of globule size. To evaluate the gastroprotective effect of optimized TQ-loaded SNEDDS against indomethacin (Indo.)-induced gastric ulcers in comparison with non-emulsified TQ, the ulcer index and histopathological changes were estimated. Optimized TQ-loaded SNEDDS showed improved gastroprotective activity against Indo.-induced ulcers relative to the non-emulsified TQ. In addition, the gastroprotective index was improved by 2-fold in TQ-loaded SNEDDS as compared to non-emulsified TQ. This is attributed to the strong antioxidant and the cytoprotective activities of the TQ. These results demonstrate enhancement of the efficacy of TQ through the optimized SNEDDS.

Current approaches in lipid-based nanocarriers for oral drug delivery

Lipid-based nanocarriers have gained much interest as carriers of drugs with poor oral bioavailability because of their remarkable advantages like low toxicity, affordable scale-up manufacture, strong biocompatibility or high drug loading efficiency. The potential of these nanocarriers lies in their ability to improve the gastrointestinal stability, solubility and permeability of their cargo drugs. However, achieving efficient oral drug delivery through lipid-based nanocarriers is a challenging task, since they encounter multiple physicochemical barriers along the gastrointestinal tract, e.g. the gastric acidic content, the intestinal mucus layer or the enzymatic degradation, that they must surmount to reach their target. These limitations may be turned into opportunities through a rational design of lipid-based nanocarriers. For that purpose, this review focuses on the main challenges of the oral route indicating the strategies undertaken for lipid-based nanocarriers in order to overcome them. Understanding their shortcomings and identifying their strengths will determine the future clinical success of lipid-based nanocarriers.

Optimized Self-Nanoemulsifying Delivery System Based on Plant-Derived Oil Augments Alpha-Lipoic Acid Protective Effects Against Experimentally Induced Gastric Lesions

Peptic ulcer disease is an injury of the alimentary tract that leads to a mucosal defect reaching the submucosa. Alpha-lipoic acid (ALA), a natural potent antioxidant, has been known as a gastroprotective drug yet its low bioavailability may restrict its therapeutic efficacy. This study aimed to formulate and optimize ALA using a self-nanoemulsifying drug delivery system (SNEDDS) with a size of nano-range, enhancing its absorption and augmenting its gastric ulcer protection efficacy. Three SNEDDS components were selected as the design factors: the concentrations of the pumpkin oil (X1, 10–30%), the surfactant tween 80 (X2, 20–50%), and the co-surfactant polyethylene glycol 200 (X3, 30–60%). The experimental design for the proposed mixture produced 16 formulations with varying ALA-SNEDDS formulation component percentages. The optimized ALA-SNEDDS formula was investigated for gastric ulcer protective effects by evaluating the ulcer index and by the determination of gastric mucosa oxidative stress parameters. Results revealed that optimized ALA-SNEDDS achieved significant improvement in gastric ulcer index in comparison with raw ALA. Histopathological findings confirmed the protective effect of the formulated optimized ALASNEDDS in comparison with raw ALA. These findings suggest that formulation of ALA in SNEDDS form would be more effective in gastric ulcer protection compared to pure ALA.

Formulation and Applications of Lipid-Based Nanovehicles: Spotlight on Self-emulsifying Systems

The drug delivery investigation field is continuously widened and adapted to overcome many factors such as poor drug solubility, absorption, rapid metabolism, the variability of drug plasma levels, cellular efflux and many others. Due to resemblance to body constituents and their biocompatibility, lipids offer a promising scheme for poorly water-soluble and lipophilic drugs. Various nanoparticles including vesicular systems, lipid particulate systems, and emulsion systems provide some unique benefits as pharmaceutical carriers in drug and biomolecules delivery systems. Nowadays synthesis is directed toward simple, costless techniques, therefore, self-emulsifying systems have gained superiority over the other carriers. Self nano-emulsifying systems composed of oil, surfactant, and co-surfactant emulsified upon contact with an aqueous medium, has been widely exploited. This review attempts to provide a comprehensive interpretation of different types of lipid-based carriers emphasizing on the self-nanoemulsifying system, why it is gaining interest, formulation, composition, and applications.

Formulation optimization of solid self-microemulsifying pellets for enhanced oral bioavailability of curcumin

Solidification of self-microemulsifying drug delivery systems (SMEDDS) is one of the major trends to promote the transformation of self-microemulsion technology into industrialization. Here, a preliminary curcumin SMEDDS formulation was constructed to improve the druggability of curcumin, through the determination of equilibrium solubility determination, self-emulsifying grading assessment, and pseudo-ternary phase diagrams drafting. Furthermore, the optimal curcumin SMEDDS formulation consisted of 10% Ethyl oleate, 57.82% Cremophor RH 40, and 32.18% Transcutol P was obtained by the simplex lattice design. Besides, curcumin solid self-microemulsifying drug delivery system (S-SMEDDS) was developed by the extrusion and spheronization process to achieve the solidification of SMEDDS. The formulation of curcumin S-SMEDDS pellets was screened by the single factor experiment and the process parameters were investigated using the orthogonal optimization method. Subsequently, curcumin S-SMEDDS pellets were evaluated by apparent morphology characterization, redispersibility study, drug release behavior, and pharmacokinetic evaluation. Results from the pharmacokinetic study in rabbits showed that the AUC_0-τ of the curcumin S-SMEDDS pellets and curcumin suspension were 5.91 ± 0.28 µg/mL·h and 2.05 ± 0.04 µg/mL·h, while the relative bioavailability was 289.30%. These studies demonstrated that S-SMEDDS pellets can be a promising strategy for curcumin industrialized outputs.

Bortezomib-loaded lipidic-nano drug delivery systems; formulation, therapeutic efficacy, and pharmacokinetics

AIM

Nano drug delivery systems can provide the opportunity to reduce side effects and improve the therapeutic aspect of a variety of drugs. Bortezomib (BTZ) is a proteasome inhibitor approved for the treatment of multiple myeloma and mantle cell lymphoma. Severe side effects of BTZ are the major dose-limiting factor. Particulate drug delivery systems for BTZ are polymeric and lipidic drug delivery systems. This review focussed on lipidic-nano drug delivery systems (LNDDSs) for the delivery of BTZ.

RESULTS

LNDDSs including liposomes, solid lipid nanoparticles, and self-nanoemulsifying drug delivery systems showed reduce systemic side effects, improved therapeutic efficacy, and increased intestinal absorption. Besides LNDDSs were used to target-delivery of BTZ to cancer.

CONCLUSION

Overall, LNDDSs can be considered as a novel delivery system for BTZ to resolve the treatment-associated restrictions.

Design and development of lipid modified chitosan containing muco-adhesive self-emulsifying drug delivery systems for cefixime oral delivery

Current study was aimed to design and develop muco-adhesive self-nano emulsifying drug delivery system (SNEDDs) for improved pharmacokinetics of Cefixime (CFX) in rabbits. The components of SNEDDs formulation i.e., cinnamon oil, Tween® 80, and PEG 200 as oil, surfactant, and co-surfactant respectively were selected based on their high solubilizing capability of the drug. SNEDDs formulation was optimized using Design of experiments (D-optimal design) in terms of droplet size, poly dispersity index and zeta potential. The optimized SNEDDs formulation was studied for various parameters like droplet size, morphology, zeta potential, emulsification, optical clarity, thermodynamic stability, GIT stability, and robustness to dilution. CFX was loaded to optimized formulation to form CFX-SNEDDs. Furthermore, acyl-chitosan, a muco-adhesive agent, was added to CFX-SNEDDS to prepare CHT-CFX-SNEDDS. In vitro drug release showed the controlled release behavior reached a maximum value of 70 % at pH 6.8 within 24 h. The droplet size, atomic force microscopy, and optical clarity analysis revealed the formation of nanosized emulsion (156 ± 25 nm) with spherical morphology. Also in vivo pharmacokinetic studies on rabbits showed an increased drug plasma concentration for CHT-CFX-SNEDDs (15 ± 3 μg/mL) and CFX-SNEDDs (9 ± 2 μg/mL) in comparison with control CFX (4 ± 1 μg/mL). The results indicated that the developed CHT-CFX-SNEDDs with an increased degree of solubilization, permeation, and nanosized range emulsion enhance the oral performance of CFX.

Fabrication of nanoparticles for bone regeneration: new insight into applications of nanoemulsion technology

Introducing synthetic bone substitutes into the clinic was a major breakthrough in the regenerative medicine of bone. Despite many advantages of currently available bone implant materials such as biocompatiblity and osteoconductivity, they still suffer from relatively poor bioactivity, osteoinductivity and osteointegration. These properties can be effectively enhanced by functionalization of implant materials with nanoparticles such as osteoinductive hydroxyapatite nanocrystals, resembling inorganic part of the bone, or bioactive polymer nanoparticles providing sustained delivery of pro-osteogenic agents directly at implantation site. One of the most widespread techniques for fabrication of nanoparticles for bone regeneration applications is nanoemulsification. It allows manufacturing of nanoscale particles (<100 nm) that are injectable, 3D-printable, offer high surface-area-to-volume-ratio and minimal mass transport limitations. Nanoparticles obtained by this technique are of particular interest for biomedical engineering due to fabrication procedures requiring low surfactant concentrations, which translates into reduced risk of surfactant-related in vivo adverse effects and improved biocompatibility of the product. This review discusses nanoemulsion technology and its current uses in manufacturing of nanoparticles for bone regeneration applications. In the first section, we introduce basic concepts of nanoemulsification including nanoemulsion formation, properties and preparation methods. In the next sections, we focus on applications of nanoemulsions in fabrication of nanoparticles used for delivery of drugs/biomolecules facilitating osteogenesis and functionalization of bone implants with special emphasis on biomimetic hydroxyapatite nanoparticles, synthetic polymer nanoparticles loaded with bioactive compounds and bone-targeting nanoparticles. We also highlight key challenges in formulation of nanoparticles via nanoemulsification and outline potential further improvements in this field.

Therapeutic nanoemulsions in ophthalmic drug administration: Concept in formulations and characterization techniques for ocular drug delivery

The eye is the specialized part of the body and is comprised of numerous physiological ocular barriers that limit the drug absorption at the action site. Regardless of various efforts, efficient topical ophthalmic drug delivery remains unsolved, and thus, it is extremely necessary to advance the contemporary treatments of ocular disorders affecting the anterior and posterior cavities. Nowadays, the advent of nanotechnology-based multicomponent nanoemulsions for ophthalmic drug delivery has gained popularity due to the enhancement of ocular penetrability, improve bioavailability, increase solubility, and stability of lipophilic drugs. Nanoemulsions offer the sustained/controlled drug release and increase residence time which depend on viscosity, compositions, and stabilization process, etc.; hence, decrease the instillation frequency and improve patient compliance. Further, due to the nanosized of nanoemulsions, the sterilization process is easy as conventional solutions and cause no blur vision. The review aims to summarizes the various ocular barriers, manufacturing techniques, possible mechanisms to the retention and deep penetration into the eye, and appropriate excipients with their under-lying selection principles to prevent destabilization of nanoemulsions. This review also discusses the characterization parameters of ocular drug delivery to spike the interest of those contemplating a foray in this field. Here, in short, nanoemulsions are abridged with concepts to design clinically advantageous ocular drug delivery.

A Solid Ultra Fine Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) of Deferasirox for Improved Solubility: Optimization, Characterization, and In Vitro Cytotoxicity Studies

The research work was designed to develop a solid self-nanoemulsifying drug delivery system (S-SNEDDS) of deferasirox (DFX). According to the solubility studies of DFX in different components, Peceol, Kolliphor EL, and Transcutol were selected as excipients. Pseudo-ternary phase diagrams were constructed, and then SNEDDS formation assessment studies and solubility of DFX in selected SNEDDSs formulations were performed. DFX loaded SNEDDS were prepared and characterized. The optimum DFX-SNEDDS formulations were developed. The relative safety of the optimized SNEDDS formulation was examined in a human immortalized myelogenous leukemia cell line, K562 cells, using the MTT cell viability test. Cytotoxicity studies revealed more cell viability (71.44%) of DFX loaded SNEDDS compared to pure DFX (3.99%) at 40 μM. The selected DFX-SNEDDS formulation was converted into S-SNEDDS by adsorbing into porous carriers, in order to study its dissolution behavior. The in vitro drug release studies indicated that DFX release (Q5%) from S-SNEDDS solidified with Neusilin UFL2 was significantly higher (93.6 ± 0.7% within 5 min) compared with the marketed product (81.65 ± 2.10%). The overall results indicated that the S-SNEDDS formulation of DFX could have the potential to enhance the solubility of DFX, which would in turn have the potential to improve its oral bioavailability as a safe novel delivery system.

Techniques for Formulation of Nanoemulsion Drug Delivery System: A Review

Nanoemulsion drug delivery systems are advanced modes for delivering and improving the bioavailability of hydrophobic drugs and the drug which have high first pass metabolism. The nanoemulsion can be prepared by both high energy and low energy methods. High energy method includes high-pressure homogenization, microfluidization, and ultrasonication whereas low energy methods include the phase inversion emulsification method and the self-nanoemulsification method. Low energy methods should be preferred over high energy methods as these methods require less energy, so are more efficient and do not require any sophisticated instruments. However high energy methods are more favorable for food grade emulsion as they require lower quantities of surfactant than low energy methods. Techniques for formulation of nanoemulsion drug delivery system are overlapping in nature, especially in the case of low energy methods. In this review, we have classified different methods for formulation of nanoemulsion systems based on energy requirements, nature of phase inversion, and self-emulsification.

Brain targeting of resveratrol through intranasal lipid vesicles labelled with gold nanoparticles: in vivo evaluation and bioaccumulation investigation using computed tomography and histopathological examination

Resveratrol is a promising neuroprotective agent against neurodegenerative disorders such as Alzheimer's disease. Resveratrol-loaded transferosomes and nanoemulsions were developed and labelled with gold nanoparticles (GNPs). The water maze test was utilised to identify the effect on spatial memory recovery. The treated rats were examined for cellular uptake and bioaccumulation of drug in the brain using computed tomography (CT) and histopathological examination utilising GNPs as a biomarker. Compared with nanoemulsions, transferosomes displayed higher permeation of up to 81.29 ± 2.64% and higher fluorescence intensity with p < .05. Transferosomes significantly enhanced behavioural acquisition and spatial memory function in the amnesic rats compared with both the nanoemulsion formulation and the pure drug. CT effectively demonstrated the accumulation of GNPs in the brains of all treated rats, while superior accumulation of GNPs was observed in the rats that received the transferosome formulation. The histopathology also demonstrated GNP accumulation in the nuclei and cytoplasm in the brain tissues of both the transferosome- and nanoemulsion-treated groups. Therefore, the developed transferosomes may be considered as a well-designed brain targeting system that might further be applied for targeting many drugs to be used in the treatment of central nervous system diseases.

Assembly of Protein-Polysaccharide Complexes for Delivery of Bioactive Ingredients: A Perspective Paper

Protein-polysaccharide complexes can be created in various ways (physical mixing, enzymatic cross-linking, chemical cross-linking, and Maillard reaction), and diverse protein-polysaccharide complexes are generally grouped into non-covalent and covalent complexes. Delivery systems constructed through assembly of protein-polysaccharide complexes (DSAPC) consist of emulsion-based delivery systems, capsule-based delivery systems, molecular complexes, nanogels, core-shell particles, composite nanoparticles, and micelles. DSAPC are effective delivery vehicles in enhancing the overall efficacy of bioactive ingredients, and DSAPC may possess multiple advantages over other delivery vehicles in bioactive ingredient delivery. However, designing and applying DSAPC are still faced with some challenges, such as low loading of bioactive ingredients. Efforts are required to reconsider and improve efficiency of DSAPC in many aspects, such as controlled release and targeted delivery. On the basis of more comprehensive and deeper understandings, DSAPC can be designed more rationally for delivery of bioactive ingredients.

Self-microemulsifying Drug Delivery System for Problematic Molecules: An Update

BACKGROUND

The poor bioavailability of a problematic molecule is predominantly due to its high lipophilicity, low solubility in gastric fluids and/or high fist pass metabolism. Self microemulsifying drug delivery system (SMEDDS), a lipidic type IV nano-formulation has been of interest in the field of pharmaceutical research due to its potential for tailoring the physicochemical properties of pharmaceutical molecules.

METHODS

This review provides insights on various recent innovations and reports from the past seven years (2012-2019) of self-emulsifying formulations for the delivery of various types of poorly soluble drugs, phytoconstituents and high molecular peptides and gives exhaustive details of the outcome of the endeavors in this field.

RESULTS

Various types of innovative formulations have been molded from SMEDDS like selfemulsifying powders, granules, tablets, pellets, eutectic and cationic formulations. Till date, many research reports and patents have been filed on self-emulsifying dosage forms and many formulations have gained US-FDA approvals which are summarized in the review article.

CONCLUSION

This review content highlighted the increasing scope of SMEDDS in augmenting the physiochemical properties of an API, the variegated formulation types and the attributes of API that can be improved by SMEDD based formulations.

Use of Lipid Nanocarriers to Improve Oral Delivery of Vitamins

The chemical environment and enzymes in the gastrointestinal (GI) membrane limit the oral absorption of some vitamins. The GI epithelium also contributes to the poor permeability of numerous antioxidant agents. Thus, lipophilic vitamins do not readily dissolve in the GI tract, and therefore they have low bioavailability. Nanomedicine has the potential to improve the delivery efficiency of oral vitamins. In particular, the use of lipid nanocarriers for certain vitamins that are administered orally can provide improved solubility, chemical stability, epithelium permeability and bioavailability, half-life, nidus targeting, and fewer adverse effects. These lipid nanocarriers include self-emulsifying drug delivery systems (SEDDSs), nanoemulsions, microemulsions, solid lipid nanoparticles (SLNs), and nanostructured lipid carriers (NLCs). The use of nontoxic excipients and sophisticated material engineering of lipid nanosystems allows for control of the physicochemical properties of the nanoparticles and improved GI permeation via mucosal or lymphatic transport. In this review, we highlight recent progress in the development of lipid nanocarriers for vitamin delivery. In addition, the same lipid nanocarriers used for vitamins may also be effective as carriers of vitamin derivatives, and therefore enhance their oral bioavailability. One example is the incorporation of d-α-tocopheryl polyethylene glycol succinate (TPGS) as the emulsifier in lipid nanocarriers to increase the solubility and inhibit P-glycoprotein (P-gp) efflux. We also survey the concepts and discuss the mechanisms of nanomedical techniques that are used to develop vitamin-loaded nanocarriers.

Anticancer Efficacy of Self-Nanoemulsifying Drug Delivery System of Sunitinib Malate

Sunitinib malate (SM) is reported as a weakly soluble drug in water due to its poor dissolution rate and oral bioavailability. Hence, in the current study, various "self-nanoemulsifying drug delivery systems (SNEDDS)" of SM were prepared, characterized and evaluated for the enhancement of its in vitro dissolution rate and anticancer efficacy. On the basis of solubilization potential of SM in various excipients, "Lauroglycol-90 (oil), Triton-X100 (surfactant) and Transcutol-P (cosurfactant)" were selected for the preparation of SM SNEDDS. SM-loaded SNEDDS were developed by spontaneous emulsification method, characterized and evaluated for "thermodynamic stability, self-nanoemulsification efficiency, droplet size, polydispersity index (PDI), zeta potential (ZP), surface morphology, refractive index (RI), the percent of transmittance (% T) and drug release profile." In vitro dissolution rate of SM was significantly enhanced from an optimized SNEDDS in comparison with SM suspension. The optimized SNEDDS of SM with droplet size of 42.3 nm, PDI value of 0.174, ZP value of -36.4 mV, RI value of 1.339, % T value of 97.3%, and drug release profile of 95.4% (after 24 h via dialysis membrane) was selected for in vitro anticancer efficacy in human colon cancer cells (HT-29) by MTT assay. MTT assay indicated significant anticancer efficacy of optimized SM SNEDDS against HT-29 cells in comparison with free SM. The results of this study showed the great potential of SNEDDS in the enhancement of in vitro dissolution rate and anticancer efficacy of poorly soluble drug such as SM.

Mucus permeating self-emulsifying drug delivery systems (SEDDS): About the impact of mucolytic enzymes

This study aimed to improve the mucus permeating properties of self-emulsifying drug delivery systems (SEDDS) by anchoring lipidized bromelain, papain and trypsin using palmitoyl chloride. SEDDS containing enzyme-palmitate conjugates were characterized regarding droplet size and zeta potential. Their mucus permeating properties were evaluated by Transwell diffusion and rotating tube method using fluorescein diacetate (FDA) as marker. Degree of substitution of modified enzymes was 35.3%, 47.8% and 38.5% for bromelain-palmitate, papain-palmitate and trypsin-palmitate, respectively. SEDDS as control and SEDDS containing enzyme-palmitate conjugates displayed a droplet size less than 50nm and 180-312nm as well as a zeta potential of -3 to -4 and -4 to -5mV, respectively. The highest percentage of permeation was achieved by introducing 5% papain-palmitate into SEDDS. It could enhance the mucus permeation of SEDDS in porcine intestinal mucus 4.6-fold and 2-fold as evaluated by Transwell diffusion and rotating tube method, respectively. It is concluded that mucus permeation of SEDDS can be strongly improved by incorporation of enzyme-palmitate conjugates.

Development and in vitro characterization of a papain loaded mucolytic self-emulsifying drug delivery system (SEDDS)

The aim of the study was to create a self-emulsifying drug delivery system (SEDDS) with mucolytic properties based on incorporated papain for improved mucus permeation. In order to increase the lipophilicity of the enzyme and to dissolve it in SEDDS, hydrophobic ion pairing with sodium deoxycholate in a molar ratio of 20:1 (surfactant: enzyme) was performed. The yield of precipitated papain was 86.8±2.7% and the ion pair was loaded into the formulations to 1% (m/m). Suitable formulations were chosen according to their properties to dissolve the ion pair and characterized regarding droplet size and polydispersity index. Prepared emulsions were in a droplet size range between 50 and 120nm. Enzyme activity assay of complex and loaded SEDDS was conducted to ensure proteolytic qualities for following permeation and diffusion studies. SEDDS loaded with the ion pair showed an almost 2-fold increase in mucus permeation compared to the control without complex. Furthermore, 3-fold enhanced mucus diffusion could be confirmed in a second assay and an increase of mucosal residence on porcine intestinal mucosa up to 3- and 5-fold was observed as against the blank formulations. Consequently the incorporation of enzymes exhibiting proteolytic properties in self-emulsifying drug delivery systems may be considered as a promising strategy to enhance mucus permeation and overcome intestinal barriers.

Self-Assembled ZnO Nanoparticle Capsules for Carrying and Delivering Isotretinoin to Cancer Cells

ZnO@polymer core-shell nanoparticles are assembled into novel capsule shells with diameters of about 100 nm to load isotretinoin (ISO) with a capacity as high as 34.6 wt %. Although ISO, a widely used drug for acne treatment, by itself is not suitable for treating cancer because of its hydrophobicity, our ZnO-ISO composite showed much stronger anticancer activity. The improved cytotoxicity is ascribed to the synergistic effects of the ZnO@polymer and ISO, where the ZnO@polymer helps in the accumulation of ISO in cancer cells on the one hand, and on the other hand, ISO is released completely through ZnO decomposition under acidic conditions of cancer cells. Such a pH-triggered drug-delivery system exhibits a much improved killing of cancer cells in vitro in comparison with the benchmarks, Nintedanib and Crizotinib, two commercial drugs clinically applied against lung cancer.

Synergistic antioxidant action of vitamin E and rutin SNEDDS in ameliorating oxidative stress in a Parkinson's disease model

PURPOSE

Oxidative stress is the leading cause in the pathogenesis of Parkinson's disease. Rutin is a naturally occurring strong antioxidant molecule with wide therapeutic applications. It suffers from the problem of low oral bioavailability which is due to its poor aqueous solubility.

METHODS

In order to increase the solubility self-nanoemulsifying drug delivery systems (SNEDDS) of rutin were prepared. The oil, surfactant and co-surfactant were selected based on solubility/miscibility studies. Optimization was done by a three-factor, four-level (34) Box-Behnken design. The independent factors were oil, surfactant and co-surfactant concentration and the dependent variables were globule size, self-emulsification time, % transmittance and cumulative percentage of drug release. The optimized SNEDDS formulation (RSE6) was evaluated for various release studies. Antioxidant activity was assessed by various in vitro tests such as 2,2-diphenyl-1-picrylhydrazyl and reducing power assay. Oxidative stress models which had Parkinson's-type symptoms were used to determine the antioxidant potential of rutin SNEDDS in vivo. Permeation was assessed through confocal laser scanning microscopy.

RESULTS

An optimized SNEDDS formulation consisting of Sefsol + vitamin E-Solutol HS 15-Transcutol P at proportions of 25:35:17.5 (w/w) was prepared and characterized. The globule size and polydispersity index of the optimized formulation was found to be 16.08 ± 0.02 nm and 0.124 ± 0.01, respectively. A significant (p < 0.05) increase in the percentage of drug release was achieved in the case of the optimized formulation as compared to rutin suspension. Pharmacokinetic study showed a 2.3-fold increase in relative oral bioavailability. The optimized formulation had significant in vitro and in vivo antioxidant activity.

CONCLUSION

Rutin SNEDDS have been successfully prepared and they can serve as an effective tool in enhancing the oral bioavailability and efficacy of rutin, thus helping in ameliorating oxidative stress in neurodegenerative disorders like Parkinson's disease.

Novel in situ self-assembly nanoparticles for formulating a poorly water-soluble drug in oral solid granules, improving stability, palatability, and bioavailability

PURPOSE

The purpose of this study was to develop a novel lipid-based nanotechnology to formulate poorly water-soluble drugs in oral solid granules to improve stability, palatability, and bioavailability.

MATERIALS AND METHODS

In one method, we prepared ritonavir (RTV) nanoparticles (NPs) by a microemulsion-precursor method and then converted the RTV NPs to solid granules by wet granulation to produce RTV NP-containing granules. In the other innovative method, we did not use water in the formulation preparation, and discovered novel in situ self-assembly nanoparticles (ISNPs). We prepared RTV ISNP granules that did not initially contain NPs, but spontaneously produced RTV ISNPs when the granules were introduced to water with gentle agitation. We fully characterized these RTV nanoformulations. We also used rats to test the bioavailability of RTV ISNP granules. Finally, an Astree electronic tongue was used to assess the taste of the RTV ISNP granules.

RESULTS

RTV NP-containing granules only had about 1% drug loading of RTV in the solid granules. In contrast, RTV ISNP granules achieved over 16% drug loading and were stable at room temperature over 24 weeks. RTV ISNPs had particle size between 160 nm and 300 nm with narrow size distribution. RTV ISNPs were stable in simulated gastric fluid for 2 hours and in simulated intestinal fluid for another 6 hours. The data from the electronic tongue showed that the RTV ISNP granules were similar in taste to blank ISNP granules, but were much different from RTV solution. RTV ISNP granules increased RTV bioavailability over 2.5-fold compared to RTV solution.

CONCLUSION

We successfully discovered and developed novel ISNPs to manufacture RTV ISNP granules that were reconstitutable, stable, and palatable, and improved RTV bioavailability. The novel ISNP nanotechnology is a platform to manufacture oral solid dosage forms for poorly water-soluble drugs, especially for pediatric formulation development.

Bioavailability enhancement and pharmacokinetic profile of an anticancer drug ibrutinib by self-nanoemulsifying drug delivery system

Objective

The current studies were undertaken to enhance dissolution and bioavailability/pharmacokinetic profile of a newly approved anticancer drug ibrutinib (IBR) via encapsulation of drug into self-nanoemulsifying drug delivery system (SNEDDS).

Methods

Various SNEDDS formulations of IBR were developed by aqueous phase titration method using Capryol-PGMC (oil phase), Tween-20 (surfactant), Carbitol (cosurfactant) and water (aqueous phase). Developed SNEDDS of IBR was evaluated in vitro for various physicochemical properties and drug release profile.

Key findings

Based on lowest droplet size (28.7 ± 3.2 nm), least polydispersity (0.123), optimal values of zeta potential (−32.8 mV) and refractive index (1.336), highest % transmittance (98.7 ± 0.2%), highest drug release profile via dialysis membrane (98.9 ± 8.2% after 48 h) and the presence of lowest concentration of Capryol-PGMC (12% w/w), SNEDDS I1 was selected for in-vivo pharmacokinetic/bioavailability studies in female Wistar rats. In-vivo pharmacokinetic studies in rats showed that optimized SNEDDS I1 controlled the absorption of IBR compared with IBR suspension. The bioavailability of IBR from optimized SNEDDS I1 was enhanced around 2.64 times in comparison with IBR suspension.

Conclusion

These results indicated the potential of developed SNEDDS as an alternative drug delivery system for IBR to enhance its bioavailability and anticancer efficacy.

Development and in vivo evaluation of child-friendly lopinavir/ritonavir pediatric granules utilizing novel in situ self-assembly nanoparticles

The aim of this study was to develop a nanotechnology to formulate a fixed-dose combination of poorly water-soluble drugs in a children-friendly, flexible solid dosage form. For diseases like HIV, pediatric patients are taking multiple drugs for effective treatments. Fixed-dose combinations could reduce pill burdens and costs as well as improving patient adherence. However, development of fixed-dose combinations of poorly water-soluble drugs for pediatric formulations is very challenging. We discovered a novel nanotechnology that produced in situ self-assembly nanoparticles (ISNPs) when the ISNP granules were introduced to water. In this study, antiretroviral drug granules, including lopinavir (LPV) ISNP granules and a fixed-dose combination of LPV/ritonavir (RTV) ISNP granules, were prepared using the ISNP nanotechnology, which spontaneously produced drug-loaded ISNPs in contact with water. Drug-loaded ISNPs had particle size less than 158nm with mono-dispersed distribution, over 95% entrapment efficiency for both LPV and RTV and stability over 8h in simulated physiological conditions. Drug-loaded ISNP granules with about 16% of LPV and 4% of RTV were palatable and stable at room temperature over 6months. Furthermore, LPV/RTV ISNP granules displayed a 2.56-fold increase in bioavailability and significantly increased LPV concentrations in tested tissues, especially in HIV sanctuary sites, as compared to the commercial LPV/RTV tablet (Kaletra®) in rats. Overall, the results demonstrated that the novel ISNP nanotechnology is a promising platform to manufacture palatable, "heat" stable, and flexible pediatric granules for fixed-dose combinations that can be used as sachets and sprinkles. To the best of our knowledge, this is the first report on this kind of novel nanotechnology for pediatric fixed-dose combinations of poorly water-soluble drugs.