Novel alternative therapy for spinal tuberculosis during surgery: reconstructing with anti-tuberculosis bioactivity implants

Recent Advances in Nanotechnology-Based Strategies for Bone Tuberculosis Management

Bone tuberculosis, an extrapulmonary manifestation of tuberculosis, presents unique treatment challenges, including its insidious onset and complex pathology. While advancements in anti-tubercular therapy have been made, the efficacy is often limited by difficulties in achieving targeted drug concentrations and avoiding systemic toxicity. The intricate bone structure and presence of granulomas further impede effective drug delivery. Nano-drug delivery systems have emerged as a promising alternative, offering the enhanced targeting of anti-tubercular drugs. These systems, characterized by their minute size and adaptable surface properties, can be tailored to improve drug solubility, stability, and bioavailability, while also responding to specific stimuli within the bone TB microenvironment for controlled drug release. Nano-drug delivery systems can encapsulate drugs for precise delivery to the infection site. A significant innovation is their integration with prosthetics or biomaterials, which aids in both drug delivery and bone reconstruction, addressing the infection and its osteological consequences. This review provides a comprehensive overview of the pathophysiology of bone tuberculosis and its current treatments, emphasizing their limitations. It then delves into the advancements in nano-drug delivery systems, discussing their design, functionality, and role in bone TB therapy. The review assesses their potential in preclinical research, particularly in targeted drug delivery, treatment efficacy, and a reduction of side effects. Finally, it highlights the transformative promise of nanotechnology in bone TB treatments and suggests future research directions in this evolving field.

Low-temperature deposition manufacturing technology: a novel 3D printing method for bone scaffolds

The application of three-dimensional printing technology in the medical field has great potential for bone defect repair, especially personalized and biological repair. As a green manufacturing process that does not involve liquefication through heating, low-temperature deposition manufacturing (LDM) is a promising type of rapid prototyping manufacturing and has been widely used to fabricate scaffolds in bone tissue engineering. The scaffolds fabricated by LDM have a multi-scale controllable pore structure and interconnected micropores, which are beneficial for the repair of bone defects. At the same time, different types of cells or bioactive factor can be integrated into three-dimensional structural scaffolds through LDM. Herein, we introduced LDM technology and summarize its applications in bone tissue engineering. We divide the scaffolds into four categories according to the skeleton materials and discuss the performance and limitations of the scaffolds. The ideas presented in this review have prospects in the development and application of LDM scaffolds.

Diagnosis and Treatment of Skipped Multifocal Spinal Tuberculosis Lesions

Spinal tuberculosis, also known as Pott's disease or tuberculous spondylitis, is usually secondary to primary infection in the lungs or other systems, and in most instances, is thought to be transmitted via blood. Typical manifestations of infection include narrowing of the intervertebral disc by erosion and bone destruction of adjacent vertebrae. Atypical spinal tuberculosis is a specific type of spinal tuberculosis. It mainly consists of single vertebral lesions, single posterior structure lesions, multiple vertebral lesions, and intra-spinal lesions. Skipped multifocal spinal tuberculosis is one of these types and is characterized by two or more vertebral lesions without the involvement of the adjoining intervertebral discs, regardless of their location. To date, only a few cases have been reported. Upon clinical admission, it can be treated conservatively or surgically, depending on the patient's symptoms. In addition, gene or biological therapies are being investigated. However, because of the exceptional imaging findings and insidious symptoms, it is often misdiagnosed as a neoplastic lesion, osteoporotic fracture, or other infectious spondylitis, increasing the risk of neurological deficit and kyphotic deformity, and delaying the optimal treatment window. In this study, we review the diagnosis and treatment strategies for skipped multifocal spinal tuberculosis lesions and enumerate the common differential diagnoses, to provide reference and guidance for clinical treatment and diagnosis direction.

[3D printing in spinal surgery-Update]

The technique of 3D printing offers a high potential for further optimization of spinal surgery. This new technology has been published for different areas in the field of spinal surgery, e.g. in preoperative planning, intraoperative use as well as to create patient-specific implants. For example, it has been demonstrated that preoperative 3‑dimensional visualization of spinal deformities is helpful in planning procedures. Moreover, insertion of pedicle screws seems to be more accurate when using individualized templates to guide the drill compared to freehand techniques. This review summarizes the current literature dealing with 3D printing in spinal surgery with special consideration of the current applications, the limitations and the future potential.

Dental Implant Nano-Engineering: Advances, Limitations and Future Directions

Titanium (Ti) and its alloys offer favorable biocompatibility, mechanical properties and corrosion resistance, which makes them an ideal material choice for dental implants. However, the long-term success of Ti-based dental implants may be challenged due to implant-related infections and inadequate osseointegration. With the development of nanotechnology, nanoscale modifications and the application of nanomaterials have become key areas of focus for research on dental implants. Surface modifications and the use of various coatings, as well as the development of the controlled release of antibiotics or proteins, have improved the osseointegration and soft-tissue integration of dental implants, as well as their antibacterial and immunomodulatory functions. This review introduces recent nano-engineering technologies and materials used in topographical modifications and surface coatings of Ti-based dental implants. These advances are discussed and detailed, including an evaluation of the evidence of their biocompatibility, toxicity, antimicrobial activities and in-vivo performances. The comparison between these attempts at nano-engineering reveals that there are still research gaps that must be addressed towards their clinical translation. For instance, customized three-dimensional printing technology and stimuli-responsive, multi-functional and time-programmable implant surfaces holds great promise to advance this field. Furthermore, long-term in vivo studies under physiological conditions are required to ensure the clinical application of nanomaterial-modified dental implants.

Opinion Piece: Patient-Specific Implants May Be the Next Big Thing in Spinal Surgery

The emergence of 3D-Printing technologies and subsequent medical applications have allowed for the development of Patient-specific implants (PSIs). There have been increasing reports of PSI application to spinal surgery over the last 5 years, including throughout the spine and to a range of pathologies, though largely for complex cases. Through a number of potential benefits, including improvements to the implant–bone interface and surgical workflow, PSIs aim to improve patient and surgical outcomes, as well as potentially provide new avenues for combating challenges routinely faced by spinal surgeons. However, obstacles to widespread acceptance and routine application include the lack of quality long-term data, research challenges and the practicalities of production and navigating the regulatory environment. While recognition of the significant potential of Spinal PSIs is evident in the literature, it is clear a number of key questions must be answered to inform future clinical and research practices. The spinal surgical community must selectively and ethically continue to offer PSIs to patients, simultaneously allowing for the necessary larger, comparative studies to be conducted, as well as continuing to provide optimal patient care, thereby ultimately determining the exact role of this technology and potentially improving outcomes.

Toward Bactericidal Enhancement of Additively Manufactured Titanium Implants

Implant-associated infections (IAIs) are among the most intractable and costly complications in implant surgery. They can lead to surgery failure, a high economic burden, and a decrease in patient quality of life. This manuscript is devoted to introducing current antimicrobial strategies for additively manufactured (AM) titanium (Ti) implants and fostering a better understanding in order to pave the way for potential modern high-throughput technologies. Most bactericidal strategies rely on implant structure design and surface modification. By means of rational structural design, the performance of AM Ti implants can be improved by maintaining a favorable balance between the mechanical, osteogenic, and antibacterial properties. This subject becomes even more important when working with complex geometries; therefore, it is necessary to select appropriate surface modification techniques, including both topological and chemical modification. Antibacterial active metal and antibiotic coatings are among the most commonly used chemical modifications in AM Ti implants. These surface modifications can successfully inhibit bacterial adhesion and biofilm formation, and bacterial apoptosis, leading to improved antibacterial properties. As a result of certain issues such as drug resistance and cytotoxicity, the development of novel and alternative antimicrobial strategies is urgently required. In this regard, the present review paper provides insights into the enhancement of bactericidal properties in AM Ti implants.

[Research progress on antibacterial properties of porous medical implant materials]

OBJECTIVE

The antibacterial properties of porous medical implant materials were reviewed to provide guidance for further improvement of new medical implant materials.

METHODS

The literature related to the antibacterial properties of porous medical implant materials in recent years was consulted, and the classification, characteristics and applications, and antibacterial methods of porous medical implant materials were reviewed.

RESULTS

Porous medical implant materials can be classified according to surface pore size, preparation process, degree of degradation in vivo, and material source. It is widely used in the medical field due to its good biocompatibility and biomechanical properties. Nevertheless, the antibacterial properties of porous medical implant materials themselves are not obvious, and their antibacterial properties need to be improved through structural modification, overall modification, and coating modification.

CONCLUSION

At present, coating modification as the mainstream modification method for improving the antibacterial properties of porous medical materials is still a research hotspot. The introduction of new antibacterial substances provides a new perspective for the development of new coated porous medical implant materials, so that the porous medical implant materials have a more reliable antibacterial effect while taking into account biocompatibility.

Functionalization of 3D-printed titanium alloy orthopedic implants: a literature review

Titanium alloy orthopedic implants produced by 3D printing combine the dual advantages of having a complex structure that cannot be manufactured by traditional techniques and the excellent physical and chemical properties of titanium and its alloys; they have been widely used in the field of orthopedics in recent years. The inherent porous structure of 3D-printed implants and the original modification processes for titanium alloys provide conditions for the functionalization of implants. To meet the needs of orthopedic surgeons and patients, functionalized implants with long-term stability and anti-infection or anti-tumor properties have been developed. The various methods of functionalization deserve to be summarized, compared and analyzed. Therefore, in this review, we will collect and discuss existing knowledge on the functionalization of 3D-printed titanium alloy orthopedic implants.

Synthesis and Characterization of Nanohydroxyapatite-Gelatin Composite with Streptomycin as Antituberculosis Injectable Bone Substitute

The most effective treatment for spinal tuberculosis was by eliminating the tuberculosis bacteria and replacing the infected bone with the bone graft to induce the healing process. This study aims to synthesize and characterize nanohydroxyapatite-gelatin-based injectable bone substitute (IBS) with addition of streptomycin. The IBS was synthesized by mixing nanohydroxyapatite and 20 w/v% gelatin with ratio of 40:60, 45:55, 50:50, 55:45, 60:40, 65:35, 70:30, and 75:25 ratio and streptomycin addition as antibiotic agent. The mixture was added by hydroxypropyl methylcellulose as suspending agent. FTIR test showed that there was a chemical reaction occurring in the mixture, between the gelatin and streptomycin. The result of injectability test showed that the highest injectability of the IBS sample was 98.64% with the setting time between 30 minutes and four hours after injection on the HA scaffold that represents the bone cavity and coat the pore scaffold. The cytotoxicity test result showed that the IBS samples were nontoxic towards BHK-21 fibroblast cells and human hepatocyte cells since the viability cell was more than 50% with significant difference (p-value<0.05). The acidity of the IBS was stable and it was sensitive towards Staphylococcus aureus with significantly difference (p-value<0.05). The streptomycin release test showed that the streptomycin could be released from the IBS-injected bone scaffold with release of 2.5% after 4 hours. All the results mentioned showed that IBS was suitable as a candidate to be used in spinal tuberculosis case.

Targeted Drug Delivery from Titanium Implants: A Review of Challenges and Approaches

Titanium implants are considered the gold standard of treatment for dental and orthopedic applications. Biocompatibility, low elasticity, and corrosion resistance are some of the key properties of these metallic implants. Nonetheless, a long-term clinical failure of implants may occur due to inadequate osseointegration. Poor osseointegration induces mobility, inflammation, increased bone resorption, and osteolysis; hence, it may result in painful revision surgeries. Topographical modifications, improvement in hydrophilicity, and the development of controlled-release drug-loading systems have shown to improve cellular adhesion, proliferation, and differentiation. Surface modifications, along with drug coating, undoubtedly demonstrate better osseointegration, especially in challenged degenerative conditions, such as osteoporosis, osteoarthritis, and osteogenesis imperfecta. Anabolic bone-acting drugs, such as parathyroid hormone peptides, simvastatin, prostaglandin-EP4-receptor antagonist, vitamin D, strontium ranelate, and anti-catabolic bone-acting drugs, such as calcitonin, bisphosphonates, and selective estrogen receptor modulators, expedite the process of osseointegration. In addition, various proteins, peptides, and growth factors may accessorize the idea of localized therapy. Loading these substances on modified titanium surfaces is achieved commonly by mechanisms such as direct coating, adsorption, and incorporating in biodegradable polymers. The primary approach toward the optimum drug loading is a critical trade-off between factors preventing release of a drug immediately and those allowing slow and sustained release. Recent advances broaden the understanding of the efficacy of adsorption, hydrogel coating, and electrospinning layer-by-layer coating facilitated by differential charge on metallic surface. This review discusses the existing approaches and challenges for the development of stable and sustained drug delivery systems on titanium implants, which would promote faster and superior osseointegration.

Dopamine-assisted fixation of drug-loaded polymeric multilayers to osteoarticular implants for tuberculosis therapy

Currently, the major issues in the treatment of osteoarticular tuberculosis (TB) after implant placement are low drug concentration at the infected focus and drug resistance resulting from the long-term chemotherapy. The application of drug-loaded polymeric multilayers on implantable devices offers a promising solution to the problems. Herein, a poly(ethylene glycol)-based hydrogel film embedded with isoniazid (INH)-loaded alginate microparticles was fixed to Ti implants via adhesive polydopamine, subsequently capped by poly(lactic-co-glycolic acid) membranes for the sustained and localized delivery of the anti-TB drug. The antibacterial efficacy of the released INH was confirmed by a 4.5 ± 0.8 cm inhibition zone formed in the fourth week after inoculation of Mycobacterium tuberculosis. The INH-loaded Ti implants showed no toxicity to the osteoblast cell and provided a consistent drug release for nearly one week in vitro. The release profile in vivo showed a high local concentration and low systemic exposure. The local INH concentration could be kept higher than its minimum inhibitory concentration over a period of 8 weeks, which proves that it is a promising strategy to improve the severe osteoarticular TB treatment.

Current status of 3D printing in spine surgery

Three-dimensional printing (3DP) is one of the latest tools in the armamentarium of the modern spine surgeon. The yearning to be more precise and reliable whilst operating on the spine has led to an interest in this technology which has claimed to achieve these goals. 3D printing has been used pre-operatively for surgical planning and for resident or patient education. It has also found its way to the operation theatre where it is used to fabricate customized surgical tools or patient-specific implants. Several authors have highlighted significant benefits when 3D printing is used for specific indications in spine surgery. Novel applications of this technology in spine surgery have also been described and though still in a nascent stage, these are important for this technology to sustain itself in the future. However, major limitations have also come to light with this technology in use. This article seeks to review the current status and applications of 3D printing in spinal surgery and its major drawbacks while briefly describing the essentials of the technology. It is imperative that the modern spine surgeon knows about this important innovation and when and how it can be applied to improve surgical outcomes.

Nanomaterials in the Prevention, Diagnosis, and Treatment of Mycobacterium Tuberculosis Infections

Despite the tremendous advancements that have been made in biomedical research, Mycobacterium tuberculosis (TB) still remains one of the top 10 causes of death worldwide, outpacing the Human Immunodeficiency Virus as a leading cause of death from an infectious disease. In the light of such significant disease burden, tremendous efforts have been made worldwide to stem this burgeoning spread of disease. The use of nanomaterials in TB management has increased in the past decade, particularly in the areas of early TB detection, prevention, and treatment. Nanomaterials have been proven to be efficacious in the rapid and accurate detection of TB pathogens. Novel nanocarriers have also shown tremendous promise in improving drug delivery, potentially enhancing drug concentrations in target organs while at the same time, reducing treatment frequency. In addition, the engineering of antigen nanocarriers represents an exciting front in TB research, potentially paving the way for the successful development of a new class of effective TB vaccines. This article discusses epidemiology and pathogenesis of TB infections, current TB therapeutics, advanced nanomaterials for anti-TB drug delivery, and TB vaccines. In addition, challenges and future perspectives in developing safe and effective nanomaterials in TB diagnosis and therapy are also presented.

3D-printed patient-specific applications in orthopedics

With advances in both medical imaging and computer programming, two-dimensional axial images can be processed into other reformatted views (sagittal and coronal) and three-dimensional (3D) virtual models that represent a patients’ own anatomy. This processed digital information can be analyzed in detail by orthopedic surgeons to perform patient-specific orthopedic procedures. The use of 3D printing is rising and has become more prevalent in medical applications over the last decade as surgeons and researchers are increasingly utilizing the technology’s flexibility in manufacturing objects. 3D printing is a type of manufacturing process in which materials such as plastic or metal are deposited in layers to create a 3D object from a digital model. This additive manufacturing method has the advantage of fabricating objects with complex freeform geometry, which is impossible using traditional subtractive manufacturing methods. Specifically in surgical applications, the 3D printing techniques can not only generate models that give a better understanding of the complex anatomy and pathology of the patients and aid in education and surgical training, but can also produce patient-specific surgical guides or even custom implants that are tailor-made to the surgical requirements. As the clinical workflow of the 3D printing technology continues to evolve, orthopedic surgeons should embrace the latest knowledge of the technology and incorporate it into their clinical practice for patient-specific orthopedic applications. This paper is written to help orthopedic surgeons stay up-to-date on the emerging 3D technology, starting from the acquisition of clinical imaging to 3D printing for patient-specific applications in orthopedics. It 1) presents the necessary steps to prepare the medical images that are required for 3D printing, 2) reviews the current applications of 3D printing in patient-specific orthopedic procedures, 3) discusses the potential advantages and limitations of 3D-printed custom orthopedic implants, and 4) suggests the directions for future development. The 3D printing technology has been reported to be beneficial in patient-specific orthopedics, such as in the creation of anatomic models for surgical planning, education and surgical training, patient-specific instruments, and 3D-printed custom implants. Besides being anatomically conformed to a patient’s surgical requirement, 3D-printed implants can be fabricated with scaffold lattices that may facilitate osteointegration and reduce implant stiffness. However, limitations including high cost of the implants, the lead time in manufacturing, and lack of intraoperative flexibility need to be addressed. New biomimetic materials have been investigated for use in 3D printing. To increase utilization of 3D printing technology in orthopedics, an all-in-one computer platform should be developed for easy planning and seamless communications among different care providers. Further studies are needed to investigate the real clinical efficacy of 3D printings in orthopedic applications.

When 1+1>2: Nanostructured composites for hard tissue engineering applications

Multicomponent, synergistic and multifunctional nanostructures have taken over the spotlight in the realm of biomedical nanotechnologies. The most prospective materials for bone regeneration today are almost exclusively composites comprising two or more components that compensate for the shortcomings of each one of them alone. This is quite natural in view of the fact that all hard tissues in the human body, except perhaps the tooth enamel, are composite nanostructures. This review article highlights some of the most prospective breakthroughs made in this research direction, with the hard tissues in main focus being those comprising bone, tooth cementum, dentin and enamel. The major obstacles to creating collagen/apatite composites modeled after the structure of bone are mentioned, including the immunogenicity of xenogeneic collagen and continuously failing attempts to replicate the biomineralization process in vitro. Composites comprising a polymeric component and calcium phosphate are discussed in light of their ability to emulate the soft/hard composite structure of bone. Hard tissue engineering composites created using hard material components other than calcium phosphates, including silica, metals and several types of nanotubes, are also discoursed on, alongside additional components deliverable using these materials, such as cells, growth factors, peptides, antibiotics, antiresorptive and anabolic agents, pharmacokinetic conjugates and various cell-specific targeting moieties. It is concluded that a variety of hard tissue structures in the body necessitates a similar variety of biomaterials for their regeneration. The ongoing development of nanocomposites for bone restoration will result in smart, theranostic materials, capable of acting therapeutically in direct feedback with the outcome of in situ disease monitoring at the cellular and subcellular scales. Progress in this research direction is expected to take us to the next generation of biomaterials, designed with the purpose of fulfilling Daedalus' dream - not restoring the tissues, but rather augmenting them.

Three-dimensional printing in surgery: a review of current surgical applications

BACKGROUND

Three-dimensional printing (3DP) is gaining increasing recognition as a technique that will transform the landscape of surgical practice. It allows for the rapid conversion of anatomic images into physical objects, which are being used across a variety of surgical specialties. It has been unclear which groups are leading the way in coming up with novel ways of using the technology and what specifically the technology is being used for. The aim of this article was to review the current applications of 3DP in modern surgical practice.

MATERIALS AND METHODS

An electronic search was carried out in MEDLINE, EMBASE, and PsycINFO for terms related to 3DP. These were then screened for relevance and practical applications of the technology in surgery.

RESULTS

Four hundred eighty-eight articles were initially found, and these were eventually narrowed down to 93 full-text articles. It was determined that there were three main areas in which the technology is being used to print: (1) anatomic models, (2) surgical instruments, and (3) implants and prostheses.

CONCLUSIONS

Different specialties are at different stages in the use of the technology. The costs involved with implementing the technology and time taken for printing are important factors to consider before widespread use. For the foreseeable future, this is an exciting and interesting technology with the capacity to radically change health care and revolutionize modern surgery.

Anterolateral radical debridement and interbody bone grafting combined with transpedicle fixation in the treatment of thoracolumbar spinal tuberculosis

This retrospective cohort study was conducted to evaluate the clinical outcomes of radical anterolateral debridement and autogenous ilium with rib or titanium cage interbody autografting with transpedicle fixation for the treatment of thoracolumbar tuberculosis. Spinal tuberculosis operation aims to remove the lesions and necrotic tissues, remove spinal cord compression, and reconstruct spinal stability. However, traditional operation methods cannot effectively correct cyrtosis or stabilize the spine. In addition, the patient needs to stay in bed for a long time and may have many complications. So far, the best surgical method and fixation method for spinal tuberculosis remain controversial. There were a total of 43 patients, 16 involving spinal cord injury, from January 2004 to January 2011. The patients were surgically treated for radical anterolateral debridement via posterolateral incision and autogenous ilium with rib or titanium cage interbody autografting and single-stage transpedicle fixation. All the patients were followed up to determine the stages of intervertebral bone fusion and the corrections of spinal kyphosis with the restoration of neurological deficit. The erythrocyte sedimentation rate (ESR) of these patients decreased to normal levels for a mean of 2.8 months. The function of feeling, motion, and sphincter in 16 paraplegia cases gradually recovered after 1 week to 3 months postoperatively, and the American Spinal Injury Association scores significantly increased at the final follow-up. Intervertebral bone fusions were all achieved postoperatively. No internal fixation devices were loose, extracted, or broken. There was no correction degree loss during the follow-up. The method of radical anterolateral debridement and autogenous ilium with rib or titanium cage interbody autografting and single-stage transpedicle fixation was effective for the treatment of thoracolumbar tuberculosis, correcting kyphotic deformity, and reconstructing spinal stability, obtaining successful intervertebral bony fusion and promoting the recovery of paraplegia. These results showed satisfactory clinical outcomes.

Preparation, characterization, and in vitro cytotoxicity evaluation of a novel anti-tuberculosis reconstruction implant

Background

Reconstruction materials currently used in clinical for osteoarticular tuberculosis (TB) are unsatisfactory due to a variety of reasons. Rifampicin (RFP) is a well-known and highly effective first-line anti-tuberculosis (anti-TB) drug. Poly-DL-lactide (PDLLA) and nano-hydroxyapatite (nHA) are two promising materials that have been used both for orthopedic reconstruction and as carriers for drug release. In this study we report the development of a novel anti-TB implant for osteoarticular TB reconstruction using a combination of RFP, PDLLA and nHA.

Methods

RFP, PDLLA and nHA were used as starting materials to produce a novel anti-TB activity implant by the solvent evaporation method. After manufacture, the implant was characterized and its biodegradation and drug release profile were tested. The in vitro cytotoxicity of the implant was also evaluated in pre-osteoblast MC3T3-E1 cells using multiple methodologies.

Results

A RFP/PDLLA/nHA composite was successfully synthesized using the solvent evaporation method. The composite has a loose and porous structure with evenly distributed pores. The production process was steady and no chemical reaction occurred as proved by Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Diffraction (XRD). Meanwhile, the composite blocks degraded and released drug for at least 12 weeks. Evaluation of in vitro cytotoxicity in MC3T3-E1 cells verified that the synthesized composite blocks did not affect cell growth and proliferation.

Conclusion

It is feasible to manufacture a novel bioactive anti-TB RFP/PDLLA/nHA composite by the solvent evaporation method. The composite blocks showed appropriate properties such as degradation, drug release and biosafety to MC3T3-E1 cells. In conclusion, the novel composite blocks may have great potential for clinical applications in repairing bone defects caused by osteoarticular TB.