Prediction of Optimum Combination of Eudragit RS/Eudragit RL/Ethyl Cellulose Polymeric Free Films Based on Experimental Design for Using as a Coating System for Sustained Release Theophylline Pellets

Resolving acne with optimized adapalene microspongeal gel, in vivo and clinical evaluations

In our pursuit of enhancing acne treatment while minimizing side effects, we developed tailored Adapalene microsponges (MS) optimized using a Box-Behnken design 33. The independent variables, Eudragit RS100 percentage in the polymer mixture, organic phase volume, and drug to polymer percentage, were explored. The optimized formulation exhibited remarkable characteristics, with a 98.3% ± 1.6 production yield, 97.3% ± 1.64 entrapment efficiency, and a particle size of 31.8 ± 1.1 µm. Notably, it achieved a 24 h cumulative drug release of 75.1% ± 1.4. To delve deeper into its efficacy, we evaluated the optimized microspongeal-gel in vitro, in vivo, and clinically. It demonstrated impressive retention in the pilosebaceous unit, a target for acne treatment. Comparative studies between our optimized Adapalene microspongeal gel and marketed Adapalene revealed superior performance. In vivo studies on Propionibacterium acnes-infected mice ears showed a remarkable 97% reduction in ear thickness, accompanied by a significant decrease in inflammatory signs and NF-κB levels, as confirmed by histopathological and histochemical examination. Moreover, in preliminary clinical evaluation, it demonstrated outstanding effectiveness in reducing comedonal lesions while causing fewer irritations. This not only indicates its potential for clinical application but also underscores its ability to enhance patient satisfaction, paving the way for future commercialization.

Comparison of 5-ASA layered or matrix pellets coated with a combination of ethylcellulose and Eudragits L and S in the treatment of ulcerative colitis in rats

The aim of this study was to evaluate and optimize the combination of time and pH-dependent polymers as a single coating for the design of the colon-specific drug delivery system of 5-aminosalicylic acid (5-ASA) pellets. 5-ASA matrix pellets with a 70% drug load were prepared by the extrusion-spheronization method. The optimal coating formula which included Eudragit S (ES)+Eudragit L (EL)+Ethylcellulose (EC) was predicted for the targeted drug delivery to the colonic area by a 3² factorial design. The ratio of ES:EL:EC and coating level were considered as independent variables while the responses were the release of less than 10% of the drug within 2 h (Y₁), the release of 60-70% within 10 h at pH 6.8 (Y₂) and lag time of less than 1 h at pH 7.2 (Y₃). Also, 5-ASA layered pellets were prepared by the powder layering of 5-ASA on nonpareils (0.4-0.6 mm) in a fluidized bed coater and then coated with the same optimum coating composition. The coated 5-ASA layered or matrix pellets were tested in a rat model of ulcerative colitis (UC) and compared with the commercial form of 5-ASA pellets (Pentasa®). The ratio of ES:EL:EC of 33:52:15 w/w at a coating level of 7% was discovered as the optimum coating for the delivery of 5-ASA matrix pellets to the colon. The coated 5-ASA pellets were spherical with uniform coating as shown by SEM and met all of our release criteria as predicted. In-vivo studies demonstrated that the optimum 5-ASA layered or matrix pellets had superior anti-inflammatory activities than Pentasa® in terms of colitis activity index (CAI), colon damage score (CDS), colon/body weight ratio and colon's tissue enzymes of glutathione (GSH) and malondialdehyde (MDA). The optimum coating formulation showed a high potential for colonic delivery of 5-ASA layered or matrix pellets and triggered drug release based on pH and time.

Screening of Adapalene Microsponges Fabrication Parameters with Insight on the In vitro Biological Effectiveness

PURPOSE

The objective of the present study was to scrutinize the microsponges (MS) as a carrier system using Adapalene (ADA) as a model drug.

METHODS

Data modelling was implemented using Plackett-Burman design to identify the main variables affecting the formulation of ADA-MS. The adopted method of preparation for MS was quasi-emulsion solvent diffusion method. The nominated independent variables were volume of organic phase, sonication time, stirring speed, drug percent, polymer type, emulsifier concentration, and method of organic phase addition. As for the dependent variables, they included entrapment efficiency (E.E.%), production yield (P.Y.%), particle size (P.S.) and morphology. Furthermore, selected ADA loaded microsponges (ADA-MS) were in vitro assayed for their biological activities via cytotoxicity, UVA irradiation and cell viability, and antimicrobial activity.

RESULTS

The study indicated that the drug percent, polymer type and surfactant concentration have the key significant effect on E.E.% and P.Y.%, while, the drug percent, stirring speed and volume of organic phase have had a significant effect on P.S. and their morphology. Furthermore, ADA-MS had a momentous cytotoxic effect on A431 and M10 cell-lines with exceptional enrichment when the polymer Eudragit RS100 was used. Also, the ADA-MS increased the cell viability after UVA irradiation on HFB-4 cell-line by 14% to 43%, especially when using Ethyl Cellulose as a polymer. Lastly, the antimicrobial activity of ADA against Propionibacterium acnes was boosted when incorporated into MS.

CONCLUSION

The Plackett-Burman design proved its impact in discerning preparation variables affecting the quality of ADA-MS formulation, with heightening of the in vitro biological activities of ADA. Thus, MS was presumed to be an auspicious carrier system for ADA.

In situ and in vitro evaluation of the bioavailability of rumen-protected methionine with coating prototypes

Rumen protected amino acids are supplements that can enhance ruminal performance, yet the coating designed to protect the amino acids might also lead to different effects. Methionine is an essential methyl donor to synthesize protein, and little data exists on the effects of coating materials on its bioavailability. The purpose of this study was to estimate the effect of rumen-protected methionine (RPM) coatings with different ratios of acrylic resin IV (AR), ethyl cellulose (EC), and a mixture of AR and EC (AREC). Fifteen RPMs were prepared according to a single factor design, with 5 proportions each of AR, EC, and AREC to DL-methionine (DL-Met). Twelve hybrid small-tailed Han sheep with rumen fistula were utilized to evaluate in situ escape of RPMs, followed by in vitro abomasum-intestinal release of the RPMs. The results showed a regular variation in both ruminal disappearance and gastrointestinal release of RPMs with different coating prototypes and retention time. The RPMs that were EC and AREC coated presented high bioavailability compared to those with AR. Bioavailability of RPMs was optimal with the 2:20 AREC: DL-Met ratio, when the proportion of AR:EC is 1:1. Additionally, RPMs with a 1:3 ratio of AR:EC confirmed the optimum effect for the RPM of 2:20 AREC: DL-Met. In conclusion, an RPM with a lower AREC ratio coating can achieve better bioavailability and is synergistic to those with EC and AR.

Preparation and In Vitro-In Vivo Evaluation of Luteolin Loaded Gastroretentive Microsponge for the Eradication of Helicobacter pylori Infections

The current study aimed to develop a luteolin gastric floating microsponge for targeting Helicobacter pylori. The microsponge formulations were prepared by a quasi-emulsion method, and then evaluated for various physicochemical variables. The best microsponge was further assessed for drug-polymer interactions, surface morphology, in vivo floating, and in vitro anti H. pylori activity. The formulation which exhibited comparatively good production yield (64.45% ± 0.83), high entrapment efficiency (67.33% ± 3.79), prolonged in vitro floating time (>8 h), and sustained in-vitro drug release was selected as the best microsponge. The SEM study revealed that the best microsponge was spherical in shape and has a porous surface with interconnecting channels. DSC and XRD studies demonstrated the dispersion of luteolin in the polymeric matrix of the microsponge. Ultrasonography confirmed that the best microsponge could in the rat stomach for 4 h. The in vitro MIC results indicate that the anti H. pylori activity of the best microsponge was almost doubled and more sustained compared to pure luteolin. To conclude, it can be said that the developed luteolin gastric floating microsponge could be a better option to effectively eradicate H. pylori infections and the histopathological and pharmacodynamic assessments of our best microsponge can be expected to provide a rewarding outcome.

Extruded filaments derived 3D printed medicated skin patch to mitigate destructive pulmonary tuberculosis: design to delivery

Background: Quercetin in combination with polyvinylpyrrolidone (PVP) was found to limit the spreading of necrosis to unaffected tissues in tuberculosis-infected mice. Therefore, we hypothesized that 3D printed medicated skin patch incorporated with a quercetin-PVP combination would provide an appropriate therapeutic drug concentration with desired sustained release profile.Research design and methods: We fabricated quercetin-PVP 40 extruded-filaments by hot-melt extrusion (HME) technique along with Eudragit® RSPO and tri-ethyl citrate and further printed it to make medicated skin patches using fused deposition modeling (FDM) based 3D Printing technology. Various characterizations were performed to optimize the 3D-printed patch formulation.Results: Patch formulation has been optimized for several characterization parameters and was further assessed using SEM, DSC, and XRD studies to confirm the conversion of crystalline quercetin into an amorphous form. Finally, the pharmacokinetic profile of an optimized patch was studied in rats showing prolonged T_max, lowered C_max, and reduced fluctuations in plasma concentrations till 18 days with single skin application of 3D-printed medicated patch.Conclusion: Overall data confirmed the feasibility of developing 3D printed medicated skin patches to provide plasma levels for continued 18 days in rats after a single application.

Chitosan coated catheters alleviates mixed species biofilms of Staphylococcus epidermidis and Candida albicans

Microorganisms which adhere to the surfaces of indwelling medical implants develop into a sessile microbial community to form monomicrobial or polymicrobial biofilms. Staphylococcus epidermidis and Candida albicans are the most common pathogens co-isolated from device mediated infections. Hence development of catheters coated with anti-fouling substances is of great interest. In this current study, chitosan, extracted from the shells of marine crab Portunus sanguinolentus was coated over the surface of the urinary catheters and checked for its efficacy to inhibit the adherence of both mono and mixed species biofilms. The Extracted Chitosan (EC) coated catheters showed profound activity in reducing the preformed biofilms and the other virulence factors of the pathogens like slime production in S. epidermidis and yeast to hyphal swtich in C. albicans. Furthermore, qPCR analysis showed that EC could downregulate the virulence genes in both the pathogens when grown as monospecies and mixed species biofilms.

Development and In Vitro/Ex Vivo Characterization of Vaginal Mucoadhesive Bilayer Films Based on Ethylcellulose and Biopolymers for Vaginal Sustained Release of Tenofovir

Young women in sub-Saharan Africa have the highest risk of human immunodeficiency virus (HIV) acquisition through sexual contact of all groups. Vaginal controlled release of antiretrovirals is a priority option for the prevention of sexual transmission of the virus in women. In this manuscript, bilayer films were prepared based on ethylcellulose and a natural polymer (xanthan or tragacanth gum) plasticized with glycerol and tributylcitrate for tenofovir-controlled release. The mechanical properties and microstructure of the blank films were characterized by texture analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The loaded films were evaluated in simulated vaginal fluid through release and swelling studies and ex vivo mucoadhesion assessments. The results show that the preparation method produced bilayer films with adequate mechanical properties. The contribution of both layers allowed the sustained release of tenofovir and a mucoadhesion time of up to 360 h. The toxicity of the materials was evaluated in three cell lines of vaginal origin. The films constituted by ethylcellulose and xanthan gum in a 2:1 proportion (EX2-D) showed the longest mucoadhesion time, with 15 days of tenofovir-controlled release, zero toxicity, and optimal mechanical properties. These films are therefore a promising option for offering women a means of self-protection against the sexual transmission of HIV.

A gastric resident drug delivery system for prolonged gram-level dosing of tuberculosis treatment

Multigram drug depot systems for extended drug release could transform our capacity to effectively treat patients across a myriad of diseases. For example, tuberculosis (TB) requires multimonth courses of daily multigram doses for treatment. To address the challenge of prolonged dosing for regimens requiring multigram drug dosing, we developed a gastric resident system delivered through the nasogastric route that was capable of safely encapsulating and releasing grams of antibiotics over a period of weeks. Initial preclinical safety and drug release were demonstrated in a swine model with a panel of TB antibiotics. We anticipate multiple applications in the field of infectious diseases, as well as for other indications where multigram depots could impart meaningful benefits to patients, helping maximize adherence to their medication.

Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application

This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.

Evaluation of the in vitro Antitumor Activity of Nanostructured Cyclotides in Polymers of Eudragit® L 100-55 and RS 30 D

Background:

Cancer is a major cause of mortality and morbidity and given the limitations of many current cancer drugs, there is great need to discover and develop novel treatments. An alternative to the conventional drug discovery path is to exploit new classes of natural compounds such as cyclotides. This peptide family is characterized by linked C- and N-termini and a structural fold called the cyclic cystine knot (CCK). The CCK fold is responsible for the exceptional enzymatic, chemical and thermal stability of cyclotides.

Methods:

In the present study, an alternative to traditional cancer treatments, involving new nanomaterials and nanocarriers allowing efficient cyclotide delivery, is proposed. Using the polymers Eudragit® L 100-55 and RS 30 D, the cyclotides kalata B2 and parigidin-br1 (PBR1) were nanocapsulated, and nanoparticles 91 nm and 188 nm in diameter, respectively, were produced.

Results:

An encapsulation rate of up to 95% was observed. In vitro bioassays showed that the nanostructured cyclotides were partially able to control the development of the colorectal adenocarcinoma cell line CACO2 and the breast cancer cell line MCF-7.

Conclusion:

Data reported herein indicate that nanoformulated cyclotides exhibit antitumor activity and sustained drug release. Thus, the system using Eudragit® nanocapsules seems to be efficient for cyclotide encapsulation and probably could be used to target specific tumors in future studies.