Differential stiffness and lipid mobility in the leaflets of purple membranes

Bacteriorhodopsin of purple membrane reverses anisotropy outside the pH range of proton pumping based on logic gate realization

The bacteriorhodopsin of purple membrane is the first discovered light-sensing protein among ion transporting microbial rhodopsins, some of which (e.g. Archaerhodopsin 3) could be broadly used as tools in optogenetics having wide potential of medical applications. Since its discovery as early as in 1971, bacteriorhodopsin has attracted wide interests in nano-biotechnology, particularly in optoelectronics devices. Therefore, the present work has been motivated due to two topics; firstly, anisotropy demand became indispensible in bioelectronics; secondly, the stationary level of electric response in bacteriorhodopsin within the pH range of proton pumping (pH 3 - pH 10) implies, in turn, raising here a question about whether the electric anisotropy is implicated for reducing (or switching off) such level beyond such pH range. Noteworthy is that the purple membrane converts to blue form upon acidification, while to reddish purple form upon alkalization. In the present study, the acidic and alkaline forms of bacteriorhodopsin have exhibited most probable state of reversal for the dielectric anisotropy around pH 2.5 and pH 10.5, respectively. This is underscored by proposing a correlation seemingly found between disassembly of the crystalline structure of bacteriorhodopsin and the reversal of dielectric anisotropy, at such acidic and alkaline reversal pH's, in terms of the essence of the crystalline lattice. Most importantly, the results have substantiated dual frequency characteristics and logic gate-based dielectric anisotropy reversal to bacteriorhodopsin, which may implicate it for potential applications in bioelectronics.

Uniaxial Symmetry Breaking in Bacteriorhodopsin at the Thermal Phase Transition of Lipids of Purple Membranes

The article correlates between symmetry breaking and phase transition. An analogy, extending from physics to biology, is known to exist between these two topics. Bacteriorhodopsin (bR) as a paradigm of membrane proteins has been used as a case study in the present work. The bR, as the sole protein embedded in what is called a purple membrane (PM), has attracted widespread interest in bionanotechnological applications. The lipids of PM have a crucial role in maintaining the crystal lattice of bR inside PM. For this reason, the present work has been concerned with elucidating the thermal phase transition properties of the PM lipids in orthogonal directions. The results indicated that the axial symmetry of bR exhibits considerable changes occurring at the thermal phase transition of lipids. These changes are brought by an anomaly observed in the time course of orthogonal electric responses during the application of thermal fields on PM. The observed anomaly may bear on symmetry breaking in bR occurring at the phase transition of lipids based on such analogy found between symmetry breaking and phase transition. Lipid-protein interactions may underlie the broken axial symmetry of bR at such lipid thermal transition of PM. Accordingly, thermally perturbed axial symmetry of bR may be of biological relevance relying on the essence of the crystal lattice of bR. Most importantly, a question has to be raised in the present study: Can bR, as a helical protein with broken axial symmetry, affect the symmetry breaking of helical light? This may be of potential technical applications based on a recent discovery that bR breaks the symmetry of helical light.

Peptide-Coated Bacteriorhodopsin-Based Photoelectric Biosensor for Detecting Rheumatoid Arthritis

An effective early diagnosis is important for rheumatoid arthritis (RA) management. This study reveals a novel RA detection method using bacteriorhodopsin as a photoelectric transducer, a light-driven proton pump in purple membranes (PMs). It was devised by covalently conjugating a PM monolayer-coated electrode with a citrullinated-inter-alpha-trypsin inhibitor heavy chain 3 (ITIH3)542-556 peptide that recognizes the serum RA-associated autoantibodies. The direct serum coating decreased the photocurrents in the biosensor, with the reduction in the photocurrent caused by coating with an RA-patient serum that is significantly larger than that with a healthy-control serum (38.1% vs. 20.2%). The difference in the reduction in the photocurrent between those two serum groups widened after the serum-coated biosensor was further labeled with gold nanoparticle (AuNP)-conjugated anti-IgA (anti-IgA-AuNP) (53.6% vs. 30.6%). Both atomic force microscopic (AFM) and Raman analyses confirmed the sequential peptide, serum, and anti-IgA-AuNP coatings on the PM-coated substrates. The reductions in the photocurrent measured in both the serum and anti-IgA-AuNPs coating steps correlated well with the results using commercial enzyme-linked immunosorbent assay kits (Spearman rho = 0.805 and 0.787, respectively), with both a sensitivity and specificity close to 100% in both steps. It was shown that an RA diagnosis can be performed in either a single- or two-step mode using the developed biosensor.

Development of a flexure-based nano-actuator for high-frequency high-resolution directional sensing with atomic force microscopy

Scanning probe microscopies typically rely on the high-precision positioning of a nanoscale probe in order to gain local information about the properties of a sample. At a given location, the probe is used to interrogate a minute region of the sample, often relying on dynamical sensing for improved accuracy. This is the case for most force-based measurements in atomic force microscopy (AFM) where sensing occurs with a tip oscillating vertically, typically in the kHz to MHz frequency regime. While this approach is ideal for many applications, restricting dynamical sensing to only one direction (vertical) can become a serious limitation when aiming to quantify the properties of inherently three-dimensional systems, such as a liquid near a wall. Here, we present the design, fabrication, and calibration of a miniature high-speed scanner able to apply controlled fast and directional in-plane vibrations with sub-nanometer precision. The scanner has a resonance frequency of ∼35 kHz and is used in conjunction with a traditional AFM to augment the measurement capabilities. We illustrate its capabilities at a solid-liquid interface where we use it to quantify the preferred lateral flow direction of the liquid around every sample location. The AFM can simultaneously acquire high-resolution images of the interface, which can be superimposed with the directional measurements. Examples of sub-nanometer measurements conducted with the new scanner are also presented.

Direct and Label-Free Determination of Human Glycated Hemoglobin Levels Using Bacteriorhodopsin as the Biosensor Transducer

Glycated hemoglobin (HbA1c) levels are an important index for the diagnosis and long-term control of diabetes. This study is the first to use a direct and label-free photoelectric biosensor to determine HbA1c using bacteriorhodopsin-embedded purple membranes (PM) as a transducer. A biotinylated PM (b-PM) coated electrode that is layered with protein A-oriented antibodies against hemoglobin (Hb) readily captures non-glycated Hb (HbA0) and generates less photocurrent. The spectra of bacteriorhodopsin and Hb overlap so the photocurrent is reduced because of the partial absorption of the incident light by the captured Hb molecules. Two HbA0 and HbA1c aptasensors that are prepared by conjugating specific aptamers on b-PM coated electrodes single-step detect HbA0 and HbA1c in 15 min, without cross reactivity, with detection limits of ≤0.1 μg/mL and a dynamic range of 0.1–100 μg/mL. Both aptasensors exhibit high selectivity and long-term stability. For the clinical samples, HbA0 concentrations and HbA1c levels that are measured with aptasensors correlate well with total Hb concentrations and the HbA1c levels that are determined using standard methods (correlation gradient = 0.915 ± 0.004 and 0.981 ± 0.001, respectively). The use of these aptasensors for diabetes care is demonstrated.

Bottom Effect in Atomic Force Microscopy Nanomechanics

In this work, the influence of the rigid substrate on the determination of the sample Young's modulus, the so-called bottom-effect artifact, is demonstrated by an atomic force microscopy force-spectroscopy experiment. The nanomechanical properties of a one-component supported lipid membrane (SLM) exhibiting areas of two different thicknesses are studied: While a standard contact mechanics model (Sneddon) provides two different elastic moduli for these two morphologies, it is shown that Garcia's bottom-effect artifact correction yields a unique value, as expected for an intrinsic material property. Remarkably, it is demonstrated that the ratio between the contact radius (and not only the indentation) and the sample thickness is the key parameter addressing the relevance of the bottom-effect artifact. The experimental results are validated by finite element method simulations providing a solid support to Garcia's theory. The amphiphilic nature of the investigated material is representative of several kinds of lipids, suggesting that the results have far reaching implications for determining the correct Young's modulus of SLMs. The generality of Garcia's bottom-effect artifact correction allows its application to every kind of supported soft film.

Direct monitoring of drug-induced mechanical response of individual cells by atomic force microscopy

Mechanical characteristics of individual cells play a vital role in many biological processes and are considered as indicators of the cells' states. Disturbances including methyl-β-cyclodextrin (MβCD) and cytochalasin D (cytoD) are known to significantly affect the state of cells, but little is known about the real-time response of single cells to these drugs in their physiological condition. Here, nanoindentation-based atomic force microscopy (AFM) was used to measure the elasticity of human embryonic kidney cells in the presence and absence of these pharmaceuticals. The results showed that depletion of cholesterol in the plasma membrane with MβCD resulted in cell stiffening whereas depolymerization of the actin cytoskeleton by cytoD resulted in cell softening. Using AFM for real-time measurements, we observed that cells mechanically responded right after these drugs were added. In more detail, the cell´s elasticity suddenly increased with increasing instability upon cholesterol extraction while it is rapidly decreased without changing cellular stability upon depolymerizing actin cytoskeleton. These results demonstrated that actin cytoskeleton and cholesterol contributed differently to the cell mechanical characteristics.

AFM nanoindentation reveals decrease of elastic modulus of lipid bilayers near freezing point of water

Cell lipid membranes are the primary site of irreversible injury during freezing/thawing and cryopreservation of cells, but the underlying causes remain unknown. Here, we probe the effect of cooling from 20 °C to 0 °C on the structure and mechanical properties of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) bilayers using atomic force microscopy (AFM) imaging and AFM-based nanoindentation in a liquid environment. The Young's modulus of elasticity (E) at each temperature for DPPC was obtained at different ionic strengths. Both at 20 mM and 150 mM NaCl, E of DPPC bilayers increases exponentially -as expected-as the temperature is lowered between 20 °C and 5 °C, but at 0 °C E drops from the values measured at 5 °C. Our results support the hypothesis that mechanical weakening of the bilayer at 0 °C  is produced by  structural changes at the lipid-fluid interface.

Long-lived ionic nano-domains can modulate the stiffness of soft interfaces

Metal ions underpin countless processes at bio-interfaces, including maintaining electroneutrality, modifying mechanical properties and driving bioenergetic activity. These processes are typically described by ions behaving as independently diffusing point charges. Here we show that Na+ and K+ ions instead spontaneously form correlated nanoscale networks that evolve over seconds at the interface with an anionic bilayer in solution. Combining single-ion level atomic force microscopy and molecular dynamic simulations we investigate the configuration and dynamics of Na+, K+, and Rb+ at the lipid surface. We identify two distinct ionic states: the well-known direct electrostatic interaction with lipid headgroups and a water-mediated interaction that can drive the formation of remarkably long-lived ionic networks which evolve over many seconds. We show that this second state induces ionic network formation via correlative ion-ion interactions that generate an effective energy well of -0.4kBT/ion. These networks locally reduce the stiffness of the membrane, providing a spontaneous mechanism for tuning its mechanical properties with nanoscale precision. The ubiquity of water-mediated interactions suggest that our results have far-reaching implications for controlling the properties of soft interfaces.

Versatile Protein-A Coated Photoelectric Immunosensors with a Purple-Membrane Monolayer Transducer Fabricated by Affinity-Immobilization on a Graphene-Oxide Complexed Linker and by Shear Flow

Bacteriorhodopsin-embedded purple membranes (PM) have been demonstrated to be a sensitive photoelectric transducer for microbial detection. To efficiently prepare versatile BR-based immunosensors with protein A as antibody captures, a large, high-coverage, and uniformly oriented PM monolayer was fabricated on an electrode as an effective foundation for protein A conjugation through bis-NHS esters, by first affinity-coating biotinylated PM on an aminated surface using a complex of oxidized avidin and graphene oxide as the planar linker and then washing the coating with a shear flow. Three different polyclonal antibodies, each against Escherichia coli, Lactobacillus acidophilus, and Streptococcus mutans, respectively, were individually, effectively and readily adsorbed on the protein A coated electrodes, leading to selective and sensitive quantitative detection of their respective target cells in a single step without any labeling. A single-cell detection limit was achieved for the former two cells. AFM, photocurrent, and Raman analyses all displayed each fabricated layer as well as the captured bacteria, with AFM particularly revealing the formation of a massive continuous PM monolayer on aminated mica. The facile cell-membrane monolayer fabrication and membrane surface conjugation techniques disclosed in this study may be widely applied to the preparation of different biomembrane-based biosensors.

Impact of Electric Fields on the Nanoscale Behavior of Lipid Monolayers at the Surface of Graphite in Solution

The nanoscale organization and dynamics of lipid molecules in self-assembled membranes is central to the biological function of cells and in the technological development of synthetic lipid structures as well as in devices such as biosensors. Here, we explore the nanoscale molecular arrangement and dynamics of lipids assembled in monolayers at the surface of highly ordered pyrolytic graphite (HOPG), in different ionic solutions, and under electrical potentials. Using a combination of atomic force microscopy and fluorescence recovery after photobleaching, we show that HOPG is able to support fully formed and fluid lipid membranes, but mesoscale order and corrugations can be observed depending on the type of the lipid considered (1,2-dioleoyl- sn-glycero-3-phosphocholine, 1,2-dioleoyl- sn-glycero-3-phospho-l-serine (DOPS), and 1,2-dioleoyl-3-trimethylammoniumpropane) and the ion present (Na⁺, Ca²⁺, Cl^-). Interfacial solvation forces and ion-specific effects dominate over the electrostatic changes induced by moderate electric fields (±1.0 V vs Ag/AgCl reference electrode) with particularly marked effects in the presence of calcium, and for DOPS. Our results provide insights into the interplay between the molecular, ionic, and electrostatic interactions and the formation of dynamical ordered structures in fluid lipid membranes.

Multifrequency AFM reveals lipid membrane mechanical properties and the effect of cholesterol in modulating viscoelasticity

The physical properties of lipid bilayers comprising the cell membrane occupy the current spotlight of membrane biology. Their traditional representation as a passive 2D fluid has gradually been abandoned in favor of a more complex picture: an anisotropic time-dependent viscoelastic biphasic material, capable of transmitting or attenuating mechanical forces that regulate biological processes. In establishing new models, quantitative experiments are necessary when attempting to develop suitable techniques for dynamic measurements. Here, we map both the elastic and viscous properties of the model system 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid bilayers using multifrequency atomic force microscopy (AFM), namely amplitude modulation-frequency modulation (AM-FM) AFM imaging in an aqueous environment. Furthermore, we investigate the effect of cholesterol (Chol) on the DPPC bilayer in concentrations from 0 to 60%. The AM-AFM quantitative maps demonstrate that at low Chol concentrations, the lipid bilayer displays a distinct phase separation and is elastic, whereas at higher Chol concentration, the bilayer appears homogenous and exhibits both elastic and viscous properties. At low-Chol contents, the Estorage modulus (elastic) dominates. As the Chol insertions increases, higher energy is dissipated; and although the bilayer stiffens (increase in Estorage), the viscous component dominates (Eloss). Our results provide evidence that the lipid bilayer exhibits both elastic and viscous properties that are modulated by the presence of Chol, which may affect the propagation (elastic) or attenuation (viscous) of mechanical signals across the cell membrane.

Effect of dacarbazine on CD44 in live melanoma cells as measured by atomic force microscopy-based nanoscopy

CD44 ligand-receptor interactions are known to be involved in regulating cell migration and tumor cell metastasis. High expression levels of CD44 correlate with a poor prognosis of melanoma patients. In order to understand not only the mechanistic basis for dacarbazine (DTIC)-based melanoma treatment but also the reason for the poor prognosis of melanoma patients treated with DTIC, dynamic force spectroscopy was used to structurally map single native CD44-coupled receptors on the surface of melanoma cells. The effect of DTIC treatment was quantified by the dynamic binding strength and the ligand-binding free-energy landscape. The results demonstrated no obvious effect of DTIC on the unbinding force between CD44 ligand and its receptor, even when the CD44 nanodomains were reduced significantly. However, DTIC did perturb the kinetic and thermodynamic interactions of the CD44 ligand-receptor, with a resultant greater dissociation rate, lower affinity, lower binding free energy, and a narrower energy valley for the free-energy landscape. For cells treated with 25 and 75 μg/mL DTIC for 24 hours, the dissociation constant for CD44 increased 9- and 70-fold, respectively. The CD44 ligand binding free energy decreased from 9.94 for untreated cells to 8.65 and 7.39 kcal/mol for DTIC-treated cells, which indicated that the CD44 ligand-receptor complexes on DTIC-treated melanoma cells were less stable than on untreated cells. However, affinity remained in the micromolar range, rather than the millimolar range associated with nonaffinity ligands. Hence, the CD44 receptor could still be activated, resulting in intracellular signaling that could trigger a cellular response. These results demonstrate DTIC perturbs, but not completely inhibits, the binding of CD44 ligand to membrane receptors, suggesting a basis for the poor prognosis associated with DTIC treatment of melanoma. Overall, atomic force microscopy-based nanoscopic methods offer thermodynamic and kinetic insight into the effect of DTIC on the CD44 ligand-binding process.

Ions Modulate Stress-Induced Nanotexture in Supported Fluid Lipid Bilayers

Most plasma membranes comprise a large number of different molecules including lipids and proteins. In the standard fluid mosaic model, the membrane function is effected by proteins whereas lipids are largely passive and serve solely in the membrane cohesion. Here we show, using supported 1,2-dioleoyl-sn-glycero-3-phosphocholine lipid bilayers in different saline solutions, that ions can locally induce ordering of the lipid molecules within the otherwise fluid bilayer when the latter is supported. This nanoordering exhibits a characteristic length scale of ∼20 nm, and manifests itself clearly when mechanical stress is applied to the membrane. Atomic force microscopy (AFM) measurements in aqueous solutions containing NaCl, KCl, CaCl₂, and Tris buffer show that the magnitude of the effect is strongly ion-specific, with Ca²⁺ and Tris, respectively, promoting and reducing stress-induced nanotexturing of the membrane. The AFM results are complemented by fluorescence recovery after photobleaching experiments, which reveal an inverse correlation between the tendency for molecular nanoordering and the diffusion coefficient within the bilayer. Control AFM experiments on other lipids and at different temperatures support the hypothesis that the nanotexturing is induced by reversible, localized gel-like solidification of the membrane. These results suggest that supported fluid phospholipid bilayers are not homogenous at the nanoscale, but specific ions are able to locally alter molecular organization and mobility, and spatially modulate the membrane’s properties on a length scale of ∼20 nm. To illustrate this point, AFM was used to follow the adsorption of the membrane-penetrating antimicrobial peptide Temporin L in different solutions. The results confirm that the peptides do not absorb randomly, but follow the ion-induced spatial modulation of the membrane. Our results suggest that ionic effects have a significant impact for passively modulating the local properties of biological membranes, when in contact with a support such as the cytoskeleton.

Amphiphilic DNA tiles for controlled insertion and 2D assembly on fluid lipid membranes: the effect on mechanical properties

Future lipid membrane-associated DNA nanostructures are expected to find applications ranging from synthetic biology to nanomedicine. Here we have designed and synthesized DNA tiles and modified them with amphiphilic covalent moieties. dod-DEG groups, which consist of a hydrophilic diethylene glycol (DEG) and a hydrophobic dodecyl group, are introduced at the phosphate backbone to create amphiphilic DNA strands which are subsequently introduced into one face of the DNA tiles. In this way the tile becomes able to stably bind to lipid membranes by insertion of the hydrophobic groups inside the bilayer core. The functionalized tiles do not aggregate in solution. Our results show that these amphiphilic DNA tiles can bind and assemble into 2D lattices on both gel and fluid lipid bilayers. The binding of the DNA structures to membranes is dependent on the lipid phase of the membrane, the concentration of Mg²⁺ cations, the length of the amphiphilic modifications to the DNA as well as on the density of the modifications within the tile. Atomic force microscopy-based force spectroscopy is used to investigate the effect of the inserted DNA tiles on the mechanical properties of the lipid membranes. The results indicate that the insertion of DNA tiles produces an approx. 20% increase of the bilayer breakthrough force.

Artesunate attenuates glioma proliferation, migration and invasion by affecting cellular mechanical properties

Glioma is one of the most common malignant brain tumors. Current chemotherapy is far from providing satisfactory clinical outcomes for patients with glioma. More efficient drugs are urgently needed. Artesunate (ART) is clinically used as an anti-malarial agent and exhibits potent antiproliferative activity as a traditional Chinese medicine. In addition, ART has been shown to exert a profound cytotoxic effect on various tumor cell lines, presenting a novel candidate for cancer chemotherapy. However, its anticancer effect on glioma by altering cell biomechanical properties remains unclear. The present study aimed to identify the anticancer effects of ART on human glioma SHG44 cells by assessing cell proliferation, migration/invasion, the expression of claudin-1 and the biomechanical properties of ART-treated SHG44 cells. The proliferation of the SHG44 cells was assessed by MTT assay. The cell apoptosis was detected by flow cytometry. For cell migration and invasion assays, the Transwell was used. The expression of the gene claudin-1 was detected by polymerase chain reaction. The cell membrane and biomechanical properties, as targets of ART action, were investigated by atomic force microscopy (AFM). ART significantly inhibited the proliferation of SHG44 cells in a dose- and time-dependent manner. After treatment with 30 mg/l ART, the level of cell apoptosis was significantly increased (from 6.88±0.062 to 23.7±4.16%). Furthermore, the cell migration and invasion abilities of the SHG44 cells were markedly inhibited after treatment with 30 mg/l ART. Compared with the control group (0 mg/l ART), the SHG44 cells treated with 30 mg/l ART exhibited upregulated expression of claudin-1, increased adhesive force (from 2,400±300 to 3,600±500 pN), increased high connection among SHG44 cells, increased cytomembrane roughness (from 0.118±0.011 to 0.269±0.015 µm) and reduced elasticity (from 23±8 to 3.5±1.1 MPa). The present study demonstrated that ART could alter the biomechanical properties of the glioma cells to inhibit cell proliferation, migration and invasion.

How soft is a single protein? The stress-strain curve of antibody pentamers with 5 pN and 50 pm resolutions

Understanding the mechanical functionalities of complex biological systems requires the measurement of the mechanical compliance of their smallest components. Here, we develop a force microscopy method to quantify the softness of a single antibody pentamer by measuring the stress-strain curve with force and deformation resolutions, respectively, of 5 pN and 50 pm. The curve shows three distinctive regions. For ultrasmall compressive forces (5-75 pN), the protein's central region shows that the strain and stress are proportional (elastic regime). This region has an average Young's modulus of 2.5 MPa. For forces between 80 and 220 pN, the stress is roughly proportional to the strain with a Young's modulus of 9 MPa. Higher forces lead to irreversible deformations (plastic regime). Full elastic recovery could reach deformations amounting to 40% of the protein height. The existence of two different elastic regions is explained in terms of the structure of the antibody central region. The stress-strain curve explains the capability of the antibody to sustain multiple collisions without any loss of biological functionality.

Buffering agents modify the hydration landscape at charged interfaces

Buffering agents are widely used to stabilise the pH of solutions in soft matter and biological sciences. They are typically composed of weak acids and bases mixed in an aqueous solution, and can interact electrostatically with charged surfaces such as biomembranes. Buffers can induce protein aggregation and structural modification of soft interfaces, but a molecular-level picture is still lacking. Here we use high-resolution atomic force microscopy to investigate the effect of five commonly used buffers, namely 4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid (HEPES), 2-(N-morpholino)ethanesulfonic acid (MES), monosodium phosphate, saline sodium citrate (SSC) and tris(hydroxymethyl)aminomethane (Tris) on the hydration landscape of Muscovite mica in solution. Mica is an ideal model substrate due to its negative surface charge and identical lattice parameter when compared with gel-phase lipid bilayers. We show that buffer molecules can produce cohesive aggregates spanning over tens of nanometres of the interface. SSC, Tris and monosodium phosphate tend to create an amorphous mesh layer several molecules thick and with no preferential ordering. In contrast, MES and HEPES adopt epitaxial arrangements commensurate with the underlying mica lattice, suggesting that they offer the most suitable solution for high-resolution studies. To confirm that this effect persisted in biologically-relevant interfaces, the experiments were repeated on a silica-supported lipid bilayer. Similar trends were observed for this system using atomic force microscopy as well as ellipsometry. The effect of the buffering agents can be mitigated by the inclusion of salt which helps displace them from the interface.

In vitro stability and cytotoxicity analysis of liposomes anchored with octylamine-graft-poly (aspartic)

Due to the polymer, octylamine-graft-poly (aspartic) (PASP-g-C₈), which acted as acidic triggered molecules, liposomes anchored with PASP-g-C₈ (OPLPs) could be safe and efficient pH sensitive drug carriers and target tumor cells.

Effect of intra-membrane C60 fullerenes on the modulus of elasticity and the mechanical resistance of gel and fluid lipid bilayers

Penetration and partition of C60 to the lipid bilayer core are both relevant to C60 toxicity, and useful to realise C60 biomedical potential. A key aspect is the effect of C60 on bilayer mechanical properties. Here, we present an experimental study on the mechanical effect of the incorporation of C60 into the hydrophobic core of fluid and gel phase zwitterionic phosphatidylcholine (PC) lipid bilayers. We demonstrate its incorporation inside the hydrophobic lipid core and the effect on the packing of the lipids and the vesicle size using a combination of infrared (IR) spectroscopy, atomic force microscopy (AFM) and laser light scattering. Using AFM we measured the Young's modulus of elasticity (E) of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) in the absence (presence) of intra-membranous C60 at 24.5 °C. E of fluid phase supported bilayers is not altered by C60, but E increases with incorporation of C60 in gel phase bilayers. The increase is higher for longer hydrocarbon chains: 1.6 times for DPPC and 2 times for DSPC. However the mechanical resistance of gel phase bilayers of curved bilayered structures decreases with the incorporation of C60. Our combined results indicate that C60 causes a decrease in gel phase lipid mobility, i.e. an increase in membrane viscosity.

Artesunate altered cellular mechanical properties leading to deregulation of cell proliferation and migration in esophageal squamous cell carcinoma

Esophageal squamous cell carcinoma (ESCC) is one of the most common types of cancer in China. Artesunate (ART) is used clinically as an anti-malarial agent and exhibits potent antiproliferative activity. In addition, ART has demonstrated remarkable antitumor activity, presenting a novel candidate for cancer chemotherapy. However, its effect on ESCC remains unknown. The present study analyzed the antitumor effects of ART in the KYSE-150 ESCC line by assessing cell proliferation, cell death, cell migration/invasion and the biomechanical properties of ART-treated KYSE-150 cells. ART treatment significantly suppressed the proliferation of KYSE-150 cells in a dose- and time-dependent manner, as assessed by MTT assay. Following treatment with 30 mg/l ART, the cell population in the G₀/G₁ phase and the level of cell apoptosis significantly increased from 54±1.5 to 68.1±0.3%, and from 4.53±0.58 to 12.45±0.62%, respectively. Furthermore, the cell migration and invasion of KYSE-150 cells treated with 30 mg/l ART was markedly inhibited. The cell membrane and biomechanical properties were investigated using atomic force microscopy, as targets of ART action. ESCC cells treated with 30 mg/l ART exhibited increased adhesive force, increased cytomembrane roughness and reduced elasticity compared with the control group (KYSE-150 cells without ART treatment). The biomechanical properties of KYSE-150 cells treated with 30 mg/l ART were similar to those of the SHEE normal human esophageal epithelial cell line. In conclusion, the present study demonstrated that ART may inhibit cell proliferation and migration in ESCC through changes in the biomechanical properties of the ESCC cells.

Investigation of temperature induced mechanical changes in supported bilayers by variants of tapping mode atomic force microscopy

Tapping mode atomic force microscopy (AFM) is an invaluable technique for examining topographical features of biological materials in solution, and there has been a growing interest in developing techniques to provide further compositional contrast and information concerning surface mechanical properties. Phase shifts, cantilever response at higher harmonic frequencies of the drive, and time-resolved tip/sample force reconstruction have all been shown to provide additional compositional contrast of surfaces, as compared to basic tapping mode AFM imaging. This study aimed to demonstrate the relative ability of these different imaging techniques to detect temperature induced changes in the elastic modulus of supported total brain lipid extract (TBLE) bilayer patches on mica. To aid in direct comparison between the different imaging techniques, all required data was obtained simultaneously while capturing traditional tapping mode AFM topography images. While all of the techniques were able to provide compositional contrast consistent with known temperature-induced changes in the bilayer patch, interpretation of the resulting contrast was not always straightforward. Phase imaging suffered from contrast inversion. Individual harmonics responded in a variety of ways to the temperature-induced changes in elastic modulus of the bilayer. The maximum tapping force (or peak force) associated with imaging the bilayer correctly reflected the changes in elastic modulus of the lipid bilayer. Importantly, as the required data can be obtained simultaneously, combining these different imaging techniques can lead to a more complete understanding of a sample's mechanical features.

Apigenin induced MCF-7 cell apoptosis-associated reactive oxygen species

Apigenin is a flavonoid, which has been proved to possess effective anti-cancer bioactivities against variety of cell lines. However, little is known about its effect on the cell-surface and the interaction between cell-surface and the reacting drug. In this study, human breast cancer line (MCF-7) was selected to be as a cell model to investigate the effects of apigenin on cell growth, proliferation, apoptosis, cellular morphology, etc. MTT assay showed that the growth inhibition induced by apigenin was in a dose-dependent manner when treated with different concentrations of apigenin while had little cytotoxic effects on human normal cells (MCF-10A). Fluorescence-based flow cytometry was used to detect cellular apoptosis and ROS production. The results showed that 80 µM apigenin could effectively induce apoptosis and overproduction of ROS in MCF-7 cells. Here, atomic force microscopy (AFM) was utilized to detect the shapes and membrane structures of MCF-7 cells at cellular or subcellular level. The results showed that the control MCF-7 cells presented typical elongated-spindle shapes with abundant pseudopodia, while after treated with apigenin, the cells shrunk and became round, the pseudopodia diminished. Moreover, the images of ultrastructure indicated that the cell membrane was composed of nanoparticles of 49 nm, but with the treated concentrations of apigenin increasing, the sizes of membrane particles significantly increased to 400 nm. These results can improve our understanding of apigenin, which can be potentially developed as a new agent for treatment of cancers.

Nano-chemical infrared imaging of membrane proteins in lipid bilayers

The spectroscopic characterization of biomolecular structures requires nanometer spatial resolution and chemical specificity. We perform full spatio-spectral imaging of dried purple membrane patches purified from Halobacterium salinarum with infrared vibrational scattering-type scanning near-field optical microscopy (s-SNOM). Using near-field spectral phase contrast based on the Amide I resonance of the protein backbone, we identify the protein distribution with 20 nm spatial resolution and few-protein sensitivity. This demonstrates the general applicability of s-SNOM vibrational nanospectroscopy, with potential extension to a wide range of biomolecular systems.

Molecular scale conductance photoswitching in engineered bacteriorhodopsin

Bacteriorhodopsin (BR) is a robust light-driven proton pump embedded in the purple membrane of the extremophilic archae Halobacterium salinarium . Its photoactivity remains in the dry state, making BR of significant interest for nanotechnological use. Here, in a novel configuration, BR was depleted from most of its endogenous lipids and covalently and asymmetrically anchored onto a gold electrode through a strategically located and highly responsive cysteine mutation; BR has no indigenous cysteines. Chemisorption on gold was characterized by surface plasmon resonance, reductive striping voltammetry, ellipsometry, and atomic force microscopy (AFM). For the first time, the conductance of isolated protein trimers, intimately probed by conducting AFM, was reproducibly and reversibly switched under wavelength-specific conditions (mean resistance of 39 ± 12 MΩ under illumination, 137 ± 18 MΩ in the dark), demonstrating a surface stability that is relevant to potential nanodevice applications.

Temperature-dependent phase transitions in zeptoliter volumes of a complex biological membrane

Phase transitions in purple membrane have been a topic of debate for the past two decades. In this work we present studies of a reversible transition of purple membrane in the 50-60 °C range in zeptoliter volumes under different heating regimes (global heating and local heating). The temperature of the reversible phase transition is 52 ± 5 °C for both local and global heating, supporting the hypothesis that this transition is mainly due to a structural rearrangement of bR molecules and trimers. To achieve high resolution measurements of temperature-dependent phase transitions, a new scanning probe microscopy-based method was developed. We believe that our new technique can be extended to other biological systems and can contribute to the understanding of inhomogeneous phase transitions in complex systems.

Nanoscale mechanical probing of supported lipid bilayers with atomic force microscopy

We present theory and experiments for the force-distance curve F(z(0)) of an atomic force microscope (AFM) tip (radius R) indenting a supported fluid bilayer (thickness 2d). For realistic conditions the force is dominated by the area compressibility modulus κ(A) of the bilayer and, to an excellent approximation, given by F=πκ(A)Rz(0)(2)/(2d-z(0))(2). The experimental AFM force curves from coexisting liquid ordered and liquid disordered domains in three-component lipid bilayers are well described by our model, which provides κ(A) in agreement with literature values. The liquid ordered phase has a yieldlike response that we model as due to the breaking of hydrogen bonds.

Curcumin induced HepG2 cell apoptosis-associated mitochondrial membrane potential and intracellular free Ca(2+) concentration

Curcumin is a phytochemicals which is able to inhibit carcinogenesis in a variety of cell lines. However little is known about its effect on the cell-surface and the interaction between cell-surface and the reacting drug. In this study, we found that curcumin could inhibit the growth of human hepatocellular carcinoma cell line (HepG2), change the cell-surface morphology and trigger the pro-apoptotic factor to promote cell apoptosis. Cell counting kit results indicated that the cell viability had a dose-dependent relationship with the curcumin concentration in 24h. The 50% inhibiting concentration (IC50) was 17.5±3.2μM. It was clear that curcumin could lead to apoptosis, and the apoptosis increased as the reacting concentration goes up. Moreover, curcumin could also affect the disruption of mitochondrial membrane potential and the disturbance of intracellular free Ca(2+) concentration. All these alterations changed the cell morphology and cell-surface ultrastructure with atomic force microscopy (AFM) detecting at nanoscale level. AFM results indicated that cells in control group clearly revealed a typical long spindle-shaped morphology. Cell tails was wide and unrolled. The ultrastructure showed that cell membrane was made up of many nanoparticles. After being treated with curcumin, cell tail was narrowed. The size of membrane nanoparticles became small. These results can improve our understanding of curcumin which can be potentially developed as a new agent for treatment of hepatocellular carcinoma since it has been reported to have a low cytotoxic effect on healthy cell. AFM can be used as a powerful tool for detecting ultrastructures.

Controlled ionic condensation at the surface of a native extremophile membrane

At the nanoscale level biological membranes present a complex interface with the solvent. The functional dynamics and relative flexibility of membrane components together with the presence of specific ionic effects can combine to create exciting new phenomena that challenge traditional theories such as the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory or models interpreting the role of ions in terms of their ability to structure water (structure making/breaking). Here we investigate ionic effects at the surface of a highly charged extremophile membrane composed of a proton pump (bacteriorhodopsin) and archaeal lipids naturally assembled into a 2D crystal. Using amplitude-modulation atomic force microscopy (AM-AFM) in solution, we obtained sub-molecular resolution images of ion-induced surface restructuring of the membrane. We demonstrate the presence of a stiff cationic layer condensed at its extracellular surface. This layer cannot be explained by traditional continuum theories. Dynamic force spectroscopy experiments suggest that it is produced by electrostatic correlation mediated by a Manning-type condensation of ions. In contrast, the cytoplasmic surface is dominated by short-range repulsive hydration forces. These findings are relevant to archaeal bioenergetics and halophilic adaptation. Importantly, they present experimental evidence of a natural system that locally controls its interactions with the surrounding medium and challenges our current understanding of biological interfaces.

Atomic force microscope study of tumor cell membranes following treatment with anti-cancer drugs

Integrity of the cell membrane is a basic requirement for maintaining the biological characteristics of a cell. In this study, changes in the morphology and ultrastructure of HeLa (human cervical carcinoma), HepG2 (human hepatocellular liver carcinoma), and C6 (rat glioma) cells were studied by atomic force microscopy (AFM) both before and after treatment with the anti-cancer drugs, colchicine or cytarabine. In response to both drugs, the microstructure of the cell membrane of all three cell types displayed similar changes; that is, with increases in drug concentration and reaction time, the degree of morphological changes on the surface of cell membrane increased. These changes included increases in the fluctuation of the surface components of the cell membrane, increase in shrinkage, or even the appearance of pores. Cell viability was maintained, as determined by optical microscope observation of gross cell morphology and by MTT assay results. Analysis of the cell membrane root-mean-square (RMS) roughness showed that under the action of colchicine and cytarabine, RMS values for the cell membranes of all three tumor cell types were positively correlated to the drug concentration and reaction time. This research has great significance for the visual diagnosis of early stage apoptosis in tumor cells in response to anti-cancer drugs, as well as in the studies on the interaction between drugs and cells. The use of AFM can be a rapid and sensitive visual method for studying the interaction between cells and drug.

Origins of phase contrast in the atomic force microscope in liquids

We study the physical origins of phase contrast in dynamic atomic force microscopy (dAFM) in liquids where low-stiffness microcantilever probes are often used for nanoscale imaging of soft biological samples with gentle forces. Under these conditions, we show that the phase contrast derives primarily from a unique energy flow channel that opens up in liquids due to the momentary excitation of higher eigenmodes. Contrary to the common assumption, phase-contrast images in liquids using soft microcantilevers are often maps of short-range conservative interactions, such as local elastic response, rather than tip-sample dissipation. The theory is used to demonstrate variations in local elasticity of purple membrane and bacteriophage 29 virions in buffer solutions using the phase-contrast images.

Electrostatic force microscopy: imaging DNA and protein polarizations one by one

We present electrostatic force microscopy images of double-stranded DNA and transcription complex on an insulating mica substrate obtained with molecular resolution using a frequency-mode noncontact atomic force microscope. The electrostatic potential images show that both DNA and transcription complexes are polarized with an upward dipole moment. Potential differences of these molecules from the mica substrate enabled us to estimate dipole moments of isolated DNA and transcription complex in zero external field to be 0.027 D/base and 0.16 D/molecule, respectively. Scanning capacitance microscopy demonstrates characteristic contrast inversion between DNA and transcription complex images, indicating the difference in electric polarizability of these molecules. These findings indicate that the electrostatic properties of individual biological molecules can be imaged on an insulator substrate while retaining complex formation.

Compositional contrast of biological materials in liquids using the momentary excitation of higher eigenmodes in dynamic atomic force microscopy

Atomic Force microscope (AFM) cantilevers commonly used for imaging soft biological samples in liquids experience a momentary excitation of the higher eigenmodes at each tap. This transient response is very sensitive to the local sample elasticity under gentle imaging conditions because the higher eigenmode time period is comparable to the tip-sample contact time. By mapping the momentary excitation response, we demonstrate a new scanning probe spectroscopy capable of resolving with high sensitivity the variations in the elasticity of soft biological materials in liquids.

Inter-oligomer interactions of the human prion protein are modulated by the polymorphism at codon 129

The common polymorphism at codon 129 in the human prion protein (PrP) has been shown in many studies to influence not only the pathology of prion disease but also the misfolding propensity of PrP. Here we used NMR, CD and atomic force microscopy in solution to investigate differences in beta-oligomer (beta(O)) formation and inter-oligomer interaction depending on the polymorphism at codon 129. NMR investigations assigned the observable amide resonances to the beta(O) N-terminal segments, showing that it is the core region of PrP (residues 127-228) that is involved in beta(O) formation. Atomic force microscopy revealed distinctive 1.8 x 15 x 15-nm disk-like structures that form stacks through inter-oligomer interactions. The propensity to form stacks and the number of oligomers involved depended on the polymorphism at codon 129, with a significantly lower degree of stacking for beta(O) with valine at position 129. This result provides evidence for conformational differences between the beta(O) allelic forms, showing that the core region of the protein including position 129 is actively involved in inter-oligomer interactions, consistent with NMR observations.

Thermal response of Langmuir-Blodgett films of dipalmitoylphosphatidylcholine studied by atomic force microscopy and force spectroscopy

The topographic evolution of supported dipalmitoylphosphatidylcholine (DPPC) monolayers with temperature has been followed by atomic force microscopy in liquid environment, revealing the presence of only one phase transition event at approximately 46 degrees C. This finding is a direct experimental proof that the two phase transitions observed in the corresponding bilayers correspond to the individual phase transition of the two leaflets composing the bilayer. The transition temperature and its dependency on the measuring medium (liquid saline solution or air) is discussed in terms of changes in van der Waals, hydration, and hydrophobic/hydrophilic interactions, and it is directly compared with the transition temperatures observed in the related bilayers under the same experimental conditions. Force spectroscopy allows us to probe the nanomechanical properties of such monolayers as a function of temperature. These measurements show that the force needed to puncture the monolayers is highly dependent on the temperature and on the phospholipid phase, ranging from 120+/-4 pN at room temperature (liquid condensed phase) to 49+/-2 pN at 65 degrees C (liquid expanded phase), which represents a two orders-of-magnitude decrease respective to the forces needed to puncture DPPC bilayers. The topographic study of the monolayers in air around the transition temperature revealed the presence of boundary domains in the monolayer surface forming 120 degrees angles between them, thus suggesting that the cooling process from the liquid-expanded to the liquid-condensed phase follows a nucleation and growth mechanism.

Electrostatic and steric interactions determine bacteriorhodopsin single-molecule biomechanics

Bacteriorhodopsin (bR) is a haloarchaeal membrane protein that converts the energy of single photons into large structural changes to directionally pump protons across purple membrane. This is achieved by a complex combination of local dynamic interactions controlling bR biomechanics at the submolecular level, producing efficient amplification of the retinal photoisomerization. Using single molecule force spectroscopy at different salt concentrations, we show that tryptophan (Trp) residues use steric specific interactions to create a rigid scaffold in bR extracellular region and are responsible for the main unfolding barriers. This scaffold, which encloses the retinal, controls bR local mechanical properties and anchors the protein into the membrane. Furthermore, the stable Trp-based network allows ion binding to two specific sites on the extracellular loops (BC and FG), which are involved in proton release and lateral transport. In contrast, the cytoplasmic side of bR is mainly governed by relatively weak nonspecific electrostatic interactions that provide the flexibility necessary for large cytoplasmic structural rearrangements during the photocycle. The presence of an extracellular Trp-based network tightly enclosing the retinal seems common to most haloarchaeal rhodopsins, and could be relevant to their exceptional efficiency.

Different interactions between the two sides of purple membrane with atomic force microscope tip

Atomic force microscopy (AFM) is known to be capable of measuring local surface charge density based on the DLVO model. However, it has failed to distinguish charge density difference between the extracellular and cytoplasmic sides of purple membrane (PM) in previous studies. In this paper, tapping-mode AFM with thioglycolate-modified tips was used to image PM in buffers of different salt concentrations. When imaged in 25 mM KCl buffer, the topography of membranes appeared to be of two different types, one flat and the other domelike. Such a difference was not observed in buffers of high salt concentrations. This suggests that the topography variation results from differences in electrostatic interaction between the AFM tip and the different membrane surfaces. With images of papain-digested PM and high-resolution images of membrane surface structure, we proved that the membrane surfaces with flat topography were on the extracellular side while the surfaces with domelike topography were on the cytoplasmic side. Hence, this provides a straightforward method to distinguish the two sides of PM without the requirement of high-resolution imaging. Force-distance curves clearly demonstrated the different tip-sample interactions. The force curves recorded on the extracellular side of PM were consistent with the DLVO model, so its surface charge density can be estimated well. However, the curves recorded on the cytoplasmic side had a much longer decay length, which is supposed to be relevant to the flexibility of the C-terminus of bacteriorhodopsin (bR).

Cisplatin nanoliposomes for cancer therapy: AFM and fluorescence imaging of cisplatin encapsulation, stability, cellular uptake, and toxicity

Cisplatin is the most effective cytotoxic agent against many cancers. Its usage, however, is limited due to inefficient uptake by the target cells. A liposomal formulation of cisplatin is reported to partly overcome this limitation. Physicochemical characteristics of the liposome-cisplatin preparation, including its size, stability, encapsulation efficiency, and cytoplasmic internalization efficiency, play a significant role in an effective usage of liposomal formulations. We have used atomic force microscopy (AFM) to determine physicochemical characteristics of cisplatin-encapsulated liposomes, AFM and fluorescence microscopy to examine their cytoplasmic internalization, and Live/Dead assay to examine their cell toxicity. Nonencapsulated cisplatin is globular and 10-50 nm in size. AFM force-dissection and stiffness measurements show that cisplatin-encapsulated liposomes are significantly stiffer ( approximately 100%) and more stable than liposomes without encapsulated cisplatin. Cisplatin-encapsulated liposomes of approximately 250 nm diameter (nanoliposomes) are most efficiently internalized and induce cell toxicity in a time-dependent manner. Liposomes without cisplatin of similar dimensions, although internalized in the cell cytoplasm, do not induce cell toxicity.