Poly-L-lysine-induced morphology changes in mixed anionic/zwitterionic and neat zwitterionic-supported phospholipid bilayers

The balance between helper T 17 and regulatory T cells in osteoimmunology and relevant research progress on bone tissue engineering

BACKGROUND

Bone regeneration is a well-regulated dynamic process, of which the prominent role of the immune system on bone homeostasis is more and more revealed by recent research. Before fully activation of the bone remodeling cells, the immune system needs to clean up the microenvironment in facilitating the bone repair initiation. Furthermore, this microenvironment must be maintained properly by various mechanisms over the entire bone regeneration process.

OBJECTIVE

This review aims to summarize the role of the T-helper 17/Regulatory T cell (Th17/Treg) balance in bone cell remodeling and discuss the relevant progress in bone tissue engineering.

RESULTS

The role of the immune response in the early stages of bone regeneration is crucial, especially the impact of the Th17/Treg balance on osteoclasts, mesenchymal stem cells (MSCs), and osteoblasts activity. By virtue of these knowledge advancements, innovative approaches in bone tissue engineering, such as nano-structures, hydrogel, and exosomes, are designed to influence the Th17/Treg balance and thereby augment bone repair and regeneration.

CONCLUSION

Targeting the Th17/Treg balance is a promising innovative strategy for developing new treatments to enhance bone regeneration, thus offering potential breakthroughs in bone injury clinics.

Peripheral adsorption of polylysine on one leaflet of a lipid bilayer reduces the lipid diffusion of both leaflets

Understanding polycation-lipid interaction is essential not only in molecular biology but also in the biomedical industry and pharmacology. However, the effect of the polycation-lipid interaction on the molecular properties of lipids in biomembranes remains elusive. Here, two fluorescence correlation spectroscopies (FCSs), pulse-interleaved excitation (PIE) FCS and lifetime-based FCS, were performed to elucidate the change in the lipid diffusion of a model biomembrane induced by polylysine (PLL) adsorption. The results of PIE-FCS showed that the diffusions of both anionic and zwitterionic lipids become slower in the presence of PLL but the mobility of the anionic lipids is much reduced, suggesting the preferential interaction between the PLL and the anionic lipids due to the electrostatic attraction. Furthermore, leaflet-specific lipid diffusion analysis by lifetime-based FCS clearly showed that PLL adsorption on one leaflet of the membrane reduces the lipid diffusion of both leaflets in the same manner. This clearly indicates that the interleaflet coupling is strong in the presence of PLL.

Injectable stress relaxation gelatin-based hydrogels with positive surface charge for adsorption of aggrecan and facile cartilage tissue regeneration

Background

Cartilage injury and pathological degeneration are reported in millions of patients globally. Cartilages such as articular hyaline cartilage are characterized by poor self-regeneration ability due to lack of vascular tissue. Current treatment methods adopt foreign cartilage analogue implants or microfracture surgery to accelerate tissue repair and regeneration. These methods are invasive and are associated with the formation of fibrocartilage, which warrants further exploration of new cartilage repair materials. The present study aims to develop an injectable modified gelatin hydrogel.

Method

The hydrogel effectively adsorbed proteoglycans secreted by chondrocytes adjacent to the cartilage tissue in situ, and rapidly formed suitable chondrocyte survival microenvironment modified by ε-poly-L-lysine (EPL). Besides, dynamic covalent bonds were introduced between glucose and phenylboronic acids (PBA). These bonds formed reversible covalent interactions between the cis−diol groups on polyols and the ionic boronate state of PBA. PBA-modified hydrogel induced significant stress relaxation, which improved chondrocyte viability and cartilage differentiation of stem cells. Further, we explored the ability of these hydrogels to promote chondrocyte viability and cartilage differentiation of stem cells through chemical and mechanical modifications.

Results

In vivo and in vitro results demonstrated that the hydrogels exhibited efficient biocompatibility. EPL and PBA modified GelMA hydrogel (Gel-EPL/B) showed stronger activity on chondrocytes compared to the GelMA control group. The Gel-EPL/B group induced the secretion of more extracellular matrix and improved the chondrogenic differentiation potential of stem cells. Finally, thus hydrogel promoted the tissue repair of cartilage defects.

Conclusion

Modified hydrogel is effective in cartilage tissue repair.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-00950-0.

The immunogenic reaction and bone defect repair function of ε-poly-L-lysine (EPL)-coated nanoscale PCL/HA scaffold in rabbit calvarial bone defect

Tissue engineering is a promising strategy for bone tissue defect reconstruction. Immunogenic reaction, which was induced by scaffolds degradation or contaminating microorganism, influence cellular activity, compromise the efficiency of tissue engineering, or eventually lead to the failure of regeneration. Inhibiting excessive immune response through modulating scaffold is critical important to promote tissue regeneration. Our previous study showed that ε-poly-L-lysine (EPL)-coated nanoscale polycaprolactone/hydroxyapatite (EPL/PCL/HA) composite scaffold has enhanced antibacterial and osteogenic properties in vitro. However, the bone defect repair function and immunogenic reaction of EPL/PCL/HA scaffolds in vivo remains unclear. In the present study, three nanoscale scaffolds (EPL/PCL/HA, PCL and PCL/HA) were transplanted into rabbit paraspinal muscle pouches, and T helper type 1 (Th1), T helper type 2 (Th2), T helper type 17 (Th17), and macrophage infiltration were analyzed after 1 week and 2 weeks to detect their immunogenic reaction. Then, the different scaffolds were transplanted into rabbit calvarial bone defect to compare the bone defect repair capacities. The results showed that EPL/PCL/HA composite scaffolds decreased pro-inflammatory Th1, Th17, and type I macrophage infiltration from 1 to 2 weeks, and increased anti-inflammatory Th2 infiltration into the regenerated area at 2 weeks in vivo, when compared to PCL and PCL/HA. In addition, EPL/PCL/HA showed an enhanced bone repair capacity compared to PCL and PCL/HA when transplanted into rabbit calvarial bone defects at both 4 and 8 weeks. Hence, our results suggest that EPL could regulate the immunogenic reaction and promote bone defect repair function of PCL/HA, which is a promising agent for tissue engineering scaffold modulation.

Mechanically Induced Bacterial Death Imaged in Real Time: A Simultaneous Nanoindentation and Fluorescence Microscopy Study

Mechano-bactericidal nanomaterials rely on their mechanical or physical interactions with bacteria and are promising antimicrobial strategies that overcome bacterial resistance. However, the real effect of mechanical versus chemical action on their activity is under debate. In this paper, we quantify the forces necessary to produce critical damage to the bacterial cell wall by performing simultaneous nanoindentation and fluorescence imaging of single bacterial cells. Our experimental setup allows puncturing the cell wall of an immobilized bacterium with the tip of an atomic force microscope (AFM) and following in real time the increase in the fluorescence signal from a cell membrane integrity marker. We correlate the forces exerted by the AFM tip with the fluorescence dynamics for tens of cells, and we find that forces above 20 nN are necessary to exert critical damage. Moreover, a similar experiment is performed in which bacterial viability is assessed through physiological activity, in order to gain a more complete view of the effect of mechanical forces on bacteria. Our results contribute to the quantitative understanding of the interaction between bacteria and nanomaterials.

Construction of vascularized tissue-engineered bone with polylysine-modified coral hydroxyapatite and a double cell-sheet complex to repair a large radius bone defect in rabbits

In this study, the potential of vascularized tissue-engineered bone constructed by a double cell-sheet (DCS) complex and polylysine (PLL)-modified coralline hydroxyapatite (CHA) to repair large radius bone defects was investigated in rabbits. Firstly, the DCS complex was obtained after rabbit adipose-derived mesenchymal stem cell (ADSC) culture was induced. Secondly, PLL-CHA composite scaffolds with different concentrations of PLL were prepared by the soaking and vacuum freeze-drying methods, and then the scaffolds were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, compression performance testing and cytocompatibility evaluation. Thirdly, DCS-PLL-CHA vascularized tissue-engineered bone was constructed in vitro and transplanted into a large radius bone defect model in rabbits. Finally, the potential of the DCS-PLL-CHA vascularized tissue-engineered bone to repair the large bone defect was evaluated through general observations, laser speckle imaging, scanning electron microscopy (SEM), histological staining, radiography observations and RT-PCR. The in vitro experimental results showed that the DCS complex provided a very large cell reserve, which carried a large number of osteoblasts and vascular endothelial cells that were induced in vitro. When the DCS complex was combined with the PLL-CHA scaffold in vitro, the effects of PLL on cell adhesion, proliferation and differentiation led to a situation similar to the chemotaxis of the body, making the combined complex more conducive to graft cellularization than the DCS complex alone. The in vivo experiments showed blood supply on the surface of the callus in each group, and the amount of blood perfusion on the surface of the defect area was almost equal among the groups. At 12 weeks, the surface of the DCS-PLL-CHA group was completely wrapped by bone tissue and osteoids, the cortical bone image was basically continuous, and the medullary cavity was mainly perforated. A large amount of well-arranged lamellar bone was formed, a small amount of undegraded CHA exhibited a linear pattern, and a large amount of bone filling could be seen in the pores. At 12 weeks, the expression levels of BGLAP, SPP1 and VEGF were similar in each group, but PECAM1 expression was higher in the DCS-PLL-CHA group than in the autogenous bone group and CHA group. The results showed that PLL could effectively promote the adhesion, proliferation and differentiation of ADSCs and that DCS-PLL-CHA vascularized tissue-engineered bone has potential for bone regeneration and bone reconstruction and can be used to repair large bone defects. STATEMENT OF SIGNIFICANCE: 1. PLL-CHA composite scaffolds with different concentrations of PLL were prepared by the soaking and vacuum freeze-drying methods. 2. The vascularized tissue-engineered bone was constructed by the double cell sheet (DCS) complex combined with PLL-CHA scaffolds. 3. The DCS-PLL-CHA vascularized tissue-engineered bone has potential for bone regeneration and bone reconstruction and can be used to repair large bone defects.

Improved osteogenic differentiation of human dental pulp stem cells in a layer-by-layer-modified gelatin scaffold

Dental pulp stem cell is a new type of mesenchymal stem cell that has a potential for tissue regeneration. Gelatin sponges are often used for hemostasis in dental surgery. In this study, we aimed to evaluate the dental pulp stem cells' proliferation and osteogenic differentiation in different layer-by-layer-modified gelatin sponge scaffolds including the G, G + P (gelatin sponge+ poly-l-lysine modification), G + M (gelatin sponge + mineralization modification), and G + M + P (gelatin sponge + mineralization modification + poly-l-lysine modification) groups in vitro and assessed them in vivo. The results showed that dental pulp stem cells had a great potential for osteogenic differentiation. In vitro, the G + M + P group not only enhanced the adhesion and proliferation of dental pulp stem cells but also facilitated their osteogenic differentiation. However, alkaline phosphatase activity was prohibited after modification. In vivo, both dental pulp stem cells and cells from nude mice grew well on the scaffold, and G + M and G + M + P groups could promote the mineralization deposit formation and the expression of osteocalcin in osteogenic differentiation of dental pulp stem cells. In conclusion, the combination of dental pulp stem cells and G + M + P scaffold has a great potential for bone tissue engineering.

Liposome fusion rates depend upon the conformation of polycation catalysts

Cryo-TEM and NaCl-leakage experiments demonstrated that the cationic polymer polylysine induces fusion of anionic liposomes but that the cationic polymer poly(N-ethyl-4-vinylpyridinium bromide) (PEVP) does not, although both polymers bind strongly to the liposomes. The difference was traced to the thickness of the coatings at constant charge coverage. Polylysine is believed to form planar β-sheets that are sufficiently thin to allow membrane fusion. In contrast, looping and disorganization among adsorbed PEVP molecules physically prevent fusion. A similar effect is likely to be applicable to important polycation-induced fusion of cell membranes.

AFM studies of the effect of temperature and electric field on the structure of a DMPC-cholesterol bilayer supported on a Au(111) electrode surface

Atomic force microscopy (AFM) was used to characterize a phospholipid bilayer composed of 70 mol % 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 30 mol % cholesterol, at a Au(111) electrode surface. Results indicate that addition of cholesterol relaxes membrane elastic stress, increases membrane thickness, and reduces defect density. The thickness and thermotropic properties of the mixed DMPC-cholesterol bilayer supported at the gold electrode surface are quite similar to the properties of the mixed membrane in unilamellar vesicles. The stability of the supported membrane at potentials negative to the potential of zero charge E(pzc) was investigated. This study demonstrates that the bilayer supported at the gold electrode surface is stable provided the applied potential (E - E(pzc)) is less than -0.3 V. At larger polarizations, swelling of the membrane is observed. Polarizations larger than -1 V cause electrodewetting of the bilayer from the gold surface. At these negative potentials, the bilayer remains in close proximity to the metal surface, separated from it by a approximately 2 nm thick layer of electrolyte.

Interactions of poly(amidoamine) dendrimers with Survanta lung surfactant: the importance of lipid domains

The interaction of generation 5 (G5) and 7 (G7) poly(amidoamine) (PAMAM) dendrimers with mica-supported Survanta bilayers is studied with atomic force microscopy (AFM). In these experiments, Survanta forms distinct gel and fluid domains with differing lipid composition. Nanoscale defects are induced by the PAMAM dendrimers. The positively charged dendrimers remove lipid from the fluid domains at a significantly greater rate than for the gel domains. Dendrimer accumulation on lipid edges and terraces preceding lipid removal has been directly imaged. Immediately following lipid removal, the mica surface is clean, indicating that lipid defects are not induced by dendrimers binding to the mica substrate and displacing the lipid.

PCB association with model phospholipid bilayers

We compare the association of an ortho-substituted and a planar PCB (polychlorinated biphenyls PCB-52 and PCB-77, respectively) with single-component phospholipid bilayers terminated with phosphocholine headgroups. First, fluorescence correlation spectroscopy (FCS) studies of diffusion on supported fluid-phase DLPC show that the ortho-substituted PCB diffuses more slowly, indicating either complex formation or obstructed diffusion. Differential scanning calorimetry (DSC) of vesicles formed from DMPC shows that the gel-to-fluid phase transition temperature is lower for vesicles containing this ortho-substituted PCB. Atomic force microscopy (AFM) shows that, whereas supported bilayers of DMPC containing this ortho-substituted PCB display two melting points, bilayers containing the coplanar PCB display just a single melting point. A model is proposed in which the ortho-substituted PCB resides within the lipid tails of these phospholipid bilayers but the coplanar PCB associates preferentially with the headgroups. This model is consistent with the known membrane disruptive ability of the ortho substituted isomer.

AFM studies of solid-supported lipid bilayers formed at a Au(111) electrode surface using vesicle fusion and a combination of Langmuir-Blodgett and Langmuir-Schaefer techniques

Atomic force microscopy (AFM) has been used to characterize the formation of a phospholipid bilayer composed of 1,2-dimyristyl-sn-glycero-3-phosphocholine (DMPC) at a Au(111) electrode surface. The bilayer was formed by one of two methods: fusion of lamellar vesicles or by the combination of Langmuir-Blodgett (LB) and Langmuir-Schaefer (LS) deposition. Results indicate that phospholipid vesicles rapidly adsorb and fuse to form a film at the electrode surface. The resulting film undergoes a very slow structural transformation until a characteristic corrugated phase is formed. Force-distance curve measurements reveal that the thickness of the corrugated phase is consistent with the thickness of a bilayer lipid membrane. The formation of the corrugated phase may be explained by considering the elastic properties of the film and taking into account spontaneous curvature induced by the asymmetric environment of the bilayer, in which one side faces the gold substrate and the other side faces the solution. The effect of temperature and electrode potential on the stability of the corrugated phase has also been described.

In situ synthesis of lipopeptides as versatile receptors for the specific binding of nanoparticles and liposomes to solid-supported membranes

A detailed study of the in situ coupling of small peptides such as CGGH6 (H6) and CGWK8 (K8) to maleimide functionalized phospholipid bilayers is presented. Individually addressable microstructured membranes are employed to unequivocally probe the conjugation. The in situ coupling of peptides via a terminal cysteine moiety to maleimide functionalized phospholipids is shown to be a convenient and versatile way to selectively fabricate peptide-modified phospholipid bilayers serving as specific receptor platforms for functionalized vesicles and nanoparticles. Specific binding of functional vesicles to the peptide-modified bilayers is achieved by either histidine complexation with Ni-NTA-DOGS containing vesicles or electrostatic interaction between positively charged oligolysine bearing lipopeptides and negatively charged POPC/POPG vesicles. Peptide receptors are also found to be easily accessible from the aqueous phase and not buried within the membrane interior.

Wide varieties of cationic nanoparticles induce defects in supported lipid bilayers

Nanoparticles with widely varying physical properties and origins (spherical versus irregular, synthetic versus biological, organic versus inorganic, flexible versus rigid, small versus large) have been previously noted to translocate across the cell plasma membrane. We have employed atomic force microscopy to determine if the physical disruption of lipid membranes, formation of holes and/or thinned regions, is a common mechanism of interaction between these nanoparticles and lipids. It was found that a wide variety of nanoparticles, including a cell penetrating peptide (MSI-78), a protein (TAT), polycationic polymers (PAMAM dendrimers, pentanol-core PAMAM dendrons, polyethyleneimine, and diethylaminoethyl-dextran), and two inorganic particles (Au-NH2, SiO2-NH2), can induce disruption, including the formation of holes, membrane thinning, and/or membrane erosion, in supported lipid bilayers.