Deciphering the Genetics of Major End-Use Quality Traits in Wheat

A k-mer-based pangenome approach for cataloging seed-storage-protein genes in wheat to facilitate genotype-to-phenotype prediction and improvement of end-use quality

Wheat is a staple food for more than 35% of the world's population, with wheat flour used to make hundreds of baked goods. Superior end-use quality is a major breeding target; however, improving it is especially time-consuming and expensive. Furthermore, genes encoding seed-storage proteins (SSPs) form multi-gene families and are repetitive, with gaps commonplace in several genome assemblies. To overcome these barriers and efficiently identify superior wheat SSP alleles, we developed "PanSK" (Pan-SSP k-mer) for genotype-to-phenotype prediction based on an SSP-based pangenome resource. PanSK uses 29-mer sequences that represent each SSP gene at the pangenomic level to reveal untapped diversity across landraces and modern cultivars. Genome-wide association studies with k-mers identified 23 SSP genes associated with end-use quality that represent novel targets for improvement. We evaluated the effect of rye secalin genes on end-use quality and found that removal of ω-secalins from 1BL/1RS wheat translocation lines is associated with enhanced end-use quality. Finally, using machine-learning-based prediction inspired by PanSK, we predicted the quality phenotypes with high accuracy from genotypes alone. This study provides an effective approach for genome design based on SSP genes, enabling the breeding of wheat varieties with superior processing capabilities and improved end-use quality.

Natural allelic variation confers diversity in the regulation of flag leaf traits in wheat

Flag leaf (FL) dimension has been reported as a key ecophysiological aspect for boosting grain yield in wheat. A worldwide winter wheat panel consisting of 261 accessions was tested to examine the phenotypical variation and identify quantitative trait nucleotides (QTNs) with candidate genes influencing FL morphology. To this end, four FL traits were evaluated during the early milk stage under two growing seasons at the Leibniz Institute of Plant Genetics and Crop Plant Research. The results showed that all leaf traits (Flag leaf length, width, area, and length/width ratio) were significantly influenced by the environments, genotypes, and environments × genotypes interactions. Then, a genome-wide association analysis was performed using 17,093 SNPs that showed 10 novel QTNs that potentially play a role in modulating FL morphology in at least two environments. Further analysis revealed 8 high-confidence candidate genes likely involved in these traits and showing high expression values from flag leaf expansion until its senescence and also during grain development. An important QTN (wsnp_RFL_Contig2177_1500201) was associated with FL width and located inside TraesCS3B02G047300 at chromosome 3B. This gene encodes a major facilitator, sugar transporter-like, and showed the highest expression values among the candidate genes reported, suggesting their positive role in controlling flag leaf and potentially being involved in photosynthetic assimilation. Our study suggests that the detection of novel marker-trait associations and the subsequent elucidation of the genetic mechanism influencing FL morphology would be of interest for improving plant architecture, light capture, and photosynthetic efficiency during grain development.

Genome wide association and haplotype analyses for the crease depth trait in bread wheat (Triticum aestivum L.)

Wheat grain has a complex structure that includes a crease on one side, and tissues within the crease region play an important role in nutrient transportation during wheat grain development. However, the genetic architecture of the crease region is still unclear. In this study, 413 global wheat accessions were resequenced and a method was developed for evaluating the phenotypic data of crease depth (CD). The CD values exhibited continuous and considerable large variation in the population, and the broad-sense heritability was 84.09%. CD was found to be positively correlated with grain-related traits and negatively with quality-related traits. Analysis of differentiation of traits between landraces and cultivars revealed that grain-related traits and CD were simultaneously improved during breeding improvement. Moreover, 2,150.8-Mb genetic segments were identified to fall within the selective sweeps between the landraces and cultivars; they contained some known functional genes for quality- and grain-related traits. Genome-wide association study (GWAS) was performed using around 10 million SNPs generated by genome resequencing and 551 significant SNPs and 18 QTLs were detected significantly associated with CD. Combined with cluster analysis of gene expression, haplotype analysis, and annotated information of candidate genes, two promising genes TraesCS3D02G197700 and TraesCS5A02G292900 were identified to potentially regulate CD. To the best of our knowledge, this is the first study to provide the genetic basis of CD, and the genetic loci identified in this study may ultimately assist in wheat breeding programs.

Wheat end-use quality: State of art, genetics, genomics-assisted improvement, future challenges, and opportunities

Wheat is the most important source of food, feed, and nutrition for humans and livestock around the world. The expanding population has increasing demands for various wheat products with different quality attributes requiring the development of wheat cultivars that fulfills specific demands of end-users including millers and bakers in the international market. Therefore, wheat breeding programs continually strive to meet these quality standards by screening their improved breeding lines every year. However, the direct measurement of various end-use quality traits such as milling and baking qualities requires a large quantity of grain, traits-specific expensive instruments, time, and an expert workforce which limits the screening process. With the advancement of sequencing technologies, the study of the entire plant genome is possible, and genetic mapping techniques such as quantitative trait locus mapping and genome-wide association studies have enabled researchers to identify loci/genes associated with various end-use quality traits in wheat. Modern breeding techniques such as marker-assisted selection and genomic selection allow the utilization of these genomic resources for the prediction of quality attributes with high accuracy and efficiency which speeds up crop improvement and cultivar development endeavors. In addition, the candidate gene approach through functional as well as comparative genomics has facilitated the translation of the genomic information from several crop species including wild relatives to wheat. This review discusses the various end-use quality traits of wheat, their genetic control mechanisms, the use of genetics and genomics approaches for their improvement, and future challenges and opportunities for wheat breeding.

Genetic architecture of end-use quality traits in soft white winter wheat

Background

Genetic improvement of end-use quality is an important objective in wheat breeding programs to meet the requirements of grain markets, millers, and bakers. However, end-use quality phenotyping is expensive and laborious thus, testing is often delayed until advanced generations. To better understand the underlying genetic architecture of end-use quality traits, we investigated the phenotypic and genotypic structure of 14 end-use quality traits in 672 advanced soft white winter wheat breeding lines and cultivars adapted to the Pacific Northwest region of the United States.

Results

This collection of germplasm had continuous distributions for the 14 end-use quality traits with industrially significant differences for all traits. The breeding lines and cultivars were genotyped using genotyping-by-sequencing and 40,518 SNP markers were used for association mapping (GWAS). The GWAS identified 178 marker-trait associations (MTAs) distributed across all wheat chromosomes. A total of 40 MTAs were positioned within genomic regions of previously discovered end-use quality genes/QTL. Among the identified MTAs, 12 markers had large effects and thus could be considered in the larger scheme of selecting and fixing favorable alleles in breeding for end-use quality in soft white wheat germplasm. We also identified 15 loci (two of them with large effects) that can be used for simultaneous breeding of more than a single end-use quality trait. The results highlight the complex nature of the genetic architecture of end-use quality, and the challenges of simultaneously selecting favorable genotypes for a large number of traits. This study also illustrates that some end-use quality traits were mainly controlled by a larger number of small-effect loci and may be more amenable to alternate selection strategies such as genomic selection.

Conclusions

In conclusion, a breeder may be faced with the dilemma of balancing genotypic selection in early generation(s) versus costly phenotyping later on.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-022-08676-5.

Uncovering genomic regions controlling plant architectural traits in hexaploid wheat using different GWAS models

Wheat is a major food crop worldwide. The plant architecture is a complex trait mostly influenced by plant height, tiller number, and leaf morphology. Plant height plays a crucial role in lodging and thus affects yield and grain quality. In this study, a wheat population was genotyped by using Illumina iSelect 90K single nucleotide polymorphism (SNP) assay and finally 22,905 high-quality SNPs were used to perform a genome-wide association study (GWAS) for plant architectural traits employing four multi-locus GWAS (ML-GWAS) and three single-locus GWAS (SL-GWAS) models. As a result, 174 and 97 significant SNPs controlling plant architectural traits were detected by ML-GWAS and SL-GWAS methods, respectively. Among these SNP makers, 43 SNPs were consistently detected, including seven across multiple environments and 36 across multiple methods. Interestingly, five SNPs (Kukri_c34553_89, RAC875_c8121_1490, wsnp_Ex_rep_c66315_64480362, Ku_c5191_340, and tplb0049a09_1302) consistently detected across multiple environments and methods, played a role in modulating both plant height and flag leaf length. Furthermore, candidate SNPs (BS00068592_51, Kukri_c4750_452 and BS00022127_51) constantly repeated in different years and methods associated with flag leaf width and number of tillers. We also detected several SNPs (Jagger_c6772_80, RAC875_c8121_1490, BS00089954_51, Excalibur_01167_1207, and Ku_c5191_340) having common associations with more than one trait across multiple environments. By further appraising these GWAS methods, the pLARmEB and FarmCPU models outperformed in SNP detection compared to the other ML-GWAS and SL-GWAS methods, respectively. Totally, 152 candidate genes were found to be likely involved in plant growth and development. These finding will be helpful for better understanding of the genetic mechanism of architectural traits in wheat.

Detection of genomic regions associated with tiller number in Iranian bread wheat under different water regimes using genome-wide association study

Two of the important traits for wheat yield are tiller and fertile tiller number, both of which have been thought to increase cereal yield in favorable and unfavorable environments. A total of 6,349 single nucleotide polymorphism (SNP) markers from the 15 K wheat Infinium array were employed for genome-wide association study (GWAS) of tillering number traits, generating a physical distance of 14,041.6 Mb based on the IWGSC wheat genome sequence. GWAS analysis using Fixed and random model Circulating Probability Unification (FarmCPU) identified a total of 47 significant marker-trait associations (MTAs) for total tiller number (TTN) and fertile tiller number (FTN) in Iranian bread wheat under different water regimes. After applying a 5% false discovery rate (FDR) threshold, a total of 13 and 11 MTAs distributed on 10 chromosomes were found to be significantly associated with TTN and FTN, respectively. Linked single nucleotide polymorphisms for IWB39005 (2A) and IWB44377 (7A) were highly significantly associated (FDR < 0.01) with TTN and FTN traits. Moreover, to validate GWAS results, meta-analysis was performed and 30 meta-QTL regions were identified on 11 chromosomes. The integration of GWAS and meta-QTLs revealed that tillering trait in wheat is a complex trait which is conditioned by the combined effects of minor changes in multiple genes. The information provided by this study can enrich the currently available candidate genes and genetic resources pools, offering evidence for subsequent analysis of genetic adaptation of wheat to different climatic conditions of Iran and other countries.

QTL analysis of farinograph and mixograph related traits in spring wheat under heat stress conditions

Farinograph and mixograph-related parameters are key elements in wheat end-products quality. Understanding the genetic control of these traits and the influence of environmental factors such as heat stress, and their interaction are critical for developing cultivars with improved for those traits. To identify QTL for six farinograph and three mixograph traits, two double haploid (DH) populations (Yecora Rojo × Ksu106 and Klasic × Ksu105) were used in experiments conducted at Riyadh and Al Qassim locations under heat stress. Single nucleotide polymorphism (SNP) markers were used to determine the number of QTLs controlling these parameters. The genetic analysis of farinograph and mixograph-related traits showed considerable variation with transgressive segregation regardless of heat stress conditions in both locations. A total of 108 additive QTLs were detected for the six farinograph and three mixograph traits in the Yecora Rojo × Ksu106 population in both locations under heat treatments. These QTLs were distributed over all 21 wheat chromosomes except 3A. Similarly, in Klassic × Ksu105 population, there were an additional 68 QTLs identified over the two locations and were allocated on all chromosomes except 1D, 2A, 6A, and 6D. In population (Yecora Rojo × Ksu106), the QTL on chromosome 7A (Excalibur_c62415_288) showed significant effects for farinograph and mixograph traits (FDDT, FDST, FBD, M × h8, and M × t) under normal and heat stress condition at both locations. Interestingly, several QTLs that are related to farinograph and mixograph traits, which showed stable expression under both locations, were detected on chromosome 7A in population (Klassic × Ksu105). Results from this study show the quantitative nature of the genetic control of the studied traits and constitute a step toward identifying major QTLs that can be sued molecular-marker assisted breeding to develop new improved quality wheat cultivars.