Combined Osmotic and Membrane Distillation for Concentration of Anthocyanin from Muscadine Pomace

Bioactive anthocyanins from aqueous extracts of muscadine grape pomace were concentrated using osmotic distillation (OD) and direct contact membrane distillation (DCMD) using polypropylene (PP) and poly(ethylene chlorotrifluoroethylene) (ECTFE) membranes. The driving force for OD is created by using a high concentration brine solution while the driving force for DCMD is generated by elevating the feed temperature relative to the permeate temperature. The brine concentration used was 4 M. The lowest fluxes were obtained for OD. Given the temperature sensitive nature of anthocyanins, the maximum temperature difference during DCMD was limited to 30 °C. The feed temperature was 40 °C and the permeate at 10 °C. Consequently, the maximum flux during DCMD was also limited. A combination of OD and DCMD was found to give the highest fluxes. High-performance liquid chromatography (HPLC) and HPLC-electrospray mass spectrometry were used to identify and quantify anthocyanins, cyanidin-3,5-O-diglucoside, delphinidin-3,5-O-diglucoside, petunidin-3,5-O-diglucoside, peonidin-3,5-O-diglucoside, and malvidin-3,5-O-diglucoside. The results obtained here suggest that, though water fluxes for DI water feed streams for PP and ECTFE membrane were similar, the fluxes obtained for the two membranes when using muscadine pomace extracts were different. Concentration factors of close to 3 was obtained for anthocyanins. Membranes also showed slightly different performance in the concentration process. Membrane surfaces were analyzed using scanning electron microscopy and Fourier-transformed infrared spectroscopy. The results suggest that adsorption of these anthocyanins on the membrane surface lead to performance differences. In an actual operation, selection of an appropriate membrane and regeneration of the membrane will be important for optimized performance. PRACTICAL APPLICATIONS: Anthocyanins are valuable therapeutic compounds, which are found in the solid residue left following fruit juice pressing. However, recovery and concentration of these therapeutic compounds remains challenging due to their stability. Here, a novel membrane-based unit operation has been investigated in order to concentrate the anthocyanins that have been extracted into aqueous solutions. The unit operation investigated here use mild processing conditions. Insights into the factors that need to be considered when optimizing of the unit operation for commercialization are discussed.

Recovery of Anthocyanins Using Membrane Technologies: A Review

Anthocyanins are naturally occurring polyphenolic compounds and give many flowers, fruits and vegetable their orange, red, purple and blue colors. Besides their color attributes, anthocyanins have received much attention in recent years due to the growing evidence of their antioxidant capacity and health benefits on humans. However, these compounds usually occur in low concentrations in mixtures of complex matrices, and therefore large-scale harvesting is needed to obtain sufficient amounts for their practical usage. Effective fractionation or separation technologies are therefore essential for the screening and production of these bioactive compounds. In this context, membrane technologies have become popular due to their operational simplicity, the capacity to achieve good simultaneous separation/pre-concentration and matrix reduction with lower temperature and lower operating cost in comparison to other sample preparation methods. Membrane fractionation is based on the molecular or particle sizes (pressure-driven processes), on their charge (electrically driven processes) or are dependent on both size and charge. Other non-pressure-driven membrane processes (osmotic pressure and vapor pressure-driven) have been developed in recent years and employed as alternatives for the separation or fractionation of bioactive compounds at ambient conditions without product deterioration. These technologies are applied either individually or in combination as an integrated membrane system to meet the different requirements for the separation of bioactive compounds. The first section of this review examines the basic principles of membrane processes, including the different types of membranes, their structure, morphology and geometry. The most frequently used techniques are also discussed. Last, the specific application of these technologies for the separation, purification and concentration of phenolic compounds, with special emphasis on anthocyanins, are also provided.