Study on the biodegradation of persistent organic pollutants (POPs)

CaO assisted mechanochemical remediation of lindane-contaminated soil

In this study, the planetary ball milling with CaO addition was used to remediate lindane-contaminated soil. Based on Hertzian theory, a mathematical model was proposed to simulate the trajectory of grinding ball and the local energy transfer during a planetary operation at the disk rotation velocities of 150-250 rpm. Besides, the influence of different parameters on lindane removal in soil was investigated, whose results showed that disk rotation velocity and reagent-to-soil ratio had a positive effect, while soil moisture, initial concentration of lindane, and mass of polluted soil demonstrated a negative influence. The mechanochemical method exhibited a higher degradation performance at 3 wt% CaO addition, and a disk rotation velocity of 250 rpm. Active species generated by ball collisions in the presence of CaO, especially superoxide (·O2-) demonstrated a significant role in participating in the lindane conversion. In combination with GCMS and XPS analysis, the proposed model provides insight into mechanochemical remediation process from physical and chemical perspectives, which mainly includes four main steps: mixing, inducing, chemical reaction, and structure destruction.

Sampling efficiency of a polyurethane foam air sampler: Effect of temperature

Effective monitoring of atmospheric concentrations is vital for assessing the Stockholm Convention's effectiveness on persistent organic pollutants (POPs). This task, particularly challenging in polar regions due to low air concentrations and temperature fluctuations, requires robust sampling techniques. Furthermore, the influence of temperature on the sampling efficiency of polyurethane foam discs remains unclear. Here we employ a flow-through sampling (FTS) column coupled with an active pump to collect air samples at varying temperatures. We delved into breakthrough profiles of key pollutants, such as polycyclic aromatic hydrocarbons (PAHs), polychlorobiphenyls (PCBs), and organochlorine pesticides (OCPs), and examined the temperature-dependent behaviors of the theoretical plate number (N) and breakthrough volume (VB) using frontal chromatography theory. Our findings reveal a significant relationship between temperature dependence coefficients (KTN, KTV) and compound volatility, with decreasing values as volatility increases. While distinct trends are noted for PAHs, PCBs, and OCPs in KTN, KTV values exhibit similar patterns across all chemicals. Moreover, we establish a binary linear correlation between log (VB/m3), 1/(T/K), and N, simplifying breakthrough level estimation by enabling easy conversion between N and VB. Finally, an empirical linear solvation energy relationship incorporating a temperature term is developed, yielding satisfactory results for N at various temperatures. This approach holds the potential to rectify temperature-related effects and loss rates in historical data from long-term monitoring networks, benefiting polar and remote regions.

Analysis of the Influence of Lactiplantibacillus plantarum and Lacticaseibacillus rhamnosus Strains on Changes in the Hexachlorobenzene Content in Fermented Mare Milk during Refrigerated Storage

(1) Background: Hexachlorobenzene (HCB) is a persistent organic pollutant that is possibly carcinogenic to humans. It is still found in the environment, humans and animals, and in foods, including milk and dairy products; (2) Methods: The influence of the probiotic cultures Lacticaseibacillus rhamnosus LCR and Lactiplantibacillus plantarum subsp. plantarum LP on the possibility of effecting the biodegradation of HCB in dairy products fermented from mare milk was investigated, taking into account the product storage time (maximum 21 days). HCB content was determined using the GC/MS method; (3) Results: A strong negative Pearson correlation (p < 0.05) was found between HCB concentration and the refrigeration storage time of the fermented beverages. The highest HCB reduction was observed in milk fermented with both Lacticaseibacillus rhamnosus LCR and Lactiplantibacillus plantarum subsp. plantarum LP (78.77%), while the lowest was noted when only Lactiplantibacillus plantarum subsp. plantarum LP was used (73.79%); (4) Conclusions: This pilot study confirmed that probiotics commonly used to give products health-promoting properties can also contribute to reducing the content of undesirable substances, and the bacterial cultures used might provide an alternative method for reducing HCB residues in fermented drinks.

Synthesis and characterization of an artificial glucosinolate bearing a chlorthalonil-based aglycon as a potent inhibitor of glucosinolate transporters

Glucosinolates (GSLs) are specialized metabolites in plants of the order Brassicales. GSL transporters (GTRs) are essential for the redistribution of GSLs and also play a role in controlling the GSL content of seeds. However, specific inhibitors of these transporters have not been reported. In the current study, we described the design and synthesis of 2,3,4,6-tetrachloro-5-cyanophenyl GSL (TCPG), an artificial GSL bearing a chlorothalonil moiety as a potent inhibitor of GTRs, and evaluated its inhibitory effect on the substrate uptake mediated through GTR1 and GTR2. Molecular docking showed that the position of the β-D-glucose group of TCPG was significantly different from that of the natural substrate in GTRs and the chlorothalonil moiety forms halogen bonds with GTRs. Functional assays and kinetic analysis of the transport activity revealed that TCPG could significantly inhibit the transport activity of GTR1 and GTR2 (IC₅₀ values (mean ± SD) being 79 ± 16 μM and 192 ± 14 μM, respectively). Similarly, TCPG could inhibit the uptake and phloem transport of exogenous sinigrin by Arabidopsis thaliana (L.) Heynh leaf tissues, while not affecting that of esculin (a fluorescent surrogate for sucrose). TCPG could also reduce the content of endogenous GSLs in phloem exudates. Together, TCPG was discovered as an undescribed inhibitor of the uptake and phloem transport of GSLs, which brings novel insights into the ligand recognition of GTRs and provides a new strategy to control the GSL level. Further tests on the ecotoxicological and environmental safety of TCPG are needed before using it as an agricultural or horticultural chemical in the future.

Global distribution of pesticides in freshwater resources and their remediation approaches

The role of pesticides in enhancing global agricultural production is magnificent. However, their unmanaged use threatens water resources and individual health. A significant pesticide concentration leaches to groundwater or reaches surface waters through runoff. Water contaminated with pesticides may cause acute or chronic toxicity to impacted populations and exert adverse environmental effects. It necessitates the monitoring and removing pesticides from water resources as prime global concerns. This work reviewed the global occurrences of pesticides in potable water and discussed the conventional and advanced technologies for the removal of pesticides. The concentration of pesticides highly varies in freshwater resources across the globe. The highest concentration of α-HCH (6.538 μg/L, at Yucatan, Mexico), lindane (6.08 μg/L at Chilka lake, Odisha, India), 2,4, DDT (0.90 μg/L, at Akkar, Lebanon), chlorpyrifos (9.1 μg/L, at Kota, Rajasthan, India), malathion (5.3 μg/L, at Kota, Rajasthan, India), atrazine (28.0 μg/L, at Venado Tuerto City, Argentina), endosulfan (0.78 μg/L, at Yavtmal, Maharashtra, India), parathion (4.17 μg/L, at Akkar, Lebanon), endrin (3.48 μg/L, at KwaZuln-Natl Province, South Africa) and imidacloprid (1.53 μg/L, at Son-La province, Vietnam) are reported. Pesticides can be significantly removed through physical, chemical, and biological treatment. Mycoremediation technology has the potential for up to 90% pesticide removal from water resources. Complete removal of the pesticides through a single biological treatment approach such as mycoremediation, phytoremediation, bioremediation, and microbial fuel cells is still a challenging task, however, the integration of two or more biological treatment approaches can attain complete removal of pesticides from water resources. Physical methods along with oxidation methods can be employed for complete removal of pesticides from drinking water.

mibPOPdb: An online database for microbial biodegradation of persistent organic pollutants

Microbial biodegradation of persistent organic pollutants (POPs) is an attractive, ecofriendly, and cost-efficient clean-up technique for reclaiming POP-contaminated environments. In the last few decades, the number of publications documenting POP-degrading microbes, enzymes, and experimental data sets has continuously increased, necessitating the development of a dedicated web resource that catalogs consolidated information on POP-degrading microbes and tools to facilitate integrative analysis of POP degradation data sets. To address this knowledge gap, we developed the Microbial Biodegradation of Persistent Organic Pollutants Database (mibPOPdb) by accumulating microbial POP degradation information from the public domain and manually curating published scientific literature. Currently, in mibPOPdb, there are 9215 microbial strain entries, including 184 gene (sub)families, 100 enzymes, 48 biodegradation pathways, and 593 intermediate compounds identified in POP-biodegradation processes, and information on 32 toxic compounds listed under the Stockholm Convention environmental treaty. Besides the standard database functionalities, which include data searching, browsing, and retrieval of database entries, we provide a suite of bioinformatics services to facilitate comparative analysis of users' own data sets against mibPOPdb entries. Additionally, we built a Graph Neural Network-based prediction model for the biodegradability classification of chemicals. The predictive model exhibited a good biodegradability classification performance and high prediction accuracy. mibPOPdb is a free data-sharing platform designated to promote research in microbial-based biodegradation of POPs and fills a long-standing gap in environmental protection research. Database URL: http://mibpop.genome-mining.cn/.

A review on bismuth-based materials for the removal of organic and inorganic pollutants

Modernized lifestyle and increased industrialization threaten living organisms because of the pollutants released from industries and household wastes. The presence of even small amounts of pollutants (organic pollutants (OPs) and inorganic pollutants-heavy metals (HMs)) shows significant effects. Thus wastewater treatment is urgently needed before being subjected to use. Many methods and materials have been developed and reported for the removal of pollutants from wastewater. This review focused on the removal of both OPs and HMs using bismuth-based (Bi-based) materials because of their low toxicity and excellent properties compared to other metals. Bi-based materials as a photocatalyst for photodegradation of OPs are discussed in detail with synthesis methods. Further, since few reviews are available on the Bi-based material for the removal and sensing of HMs, this topic was intentionally summarized. About 200 published articles and reviews have been reviewed here. Additionally, the key point that needs to be focused on the development of Bi-based photocatalysts for the removal of OPs and for upgrading the Bi-based materials as adsorbents for HMs are conferred in the outlook. This will help many researchers in their upcoming work.

Contamination, spatial distribution, and source contribution of persistent organic pollutants in the soil of Guiyang city, China: a case study

The contamination of persistent organic pollutants (POPs), including dichlorodiphenyltrichloroethane (DDT), hexachlorocyclohexane (HCH), and polycyclic aromatic hydrocarbon (PAH), is the most studied environmental issue. In 2020, a total of sixty soil samples collected from ten locations in Guiyang were analyzed to assess the presence of four DDTs and HCHs and sixteen PAHs. The concentrations of total DDTs, total HCHs and Σ₁₆PAHs in the soil were between 0.26 and 12.76, 0.23 and 51.80 μg/kg, and 10.02 and 1708.86 μg/kg, respectively. The mean and median concentrations of total DDTs, total HCHs and Σ₁₆PAHs in the soil were 1.04 and 0.26 μg/kg, 4.32 and 0.23 μg/kg, 139.14 and 98.98 μg/kg, respectively. p,p'-DDT, p,p'-DDD and γ-HCH the dominant organochloride pollutants in the soil, while 4-ring PAHs were the dominant PAHs, occupying 41.1-53.6% of the total PAHs in the soil. The highest levels of PAHs in the soil were observed in areas of Guiyang with relatively larger population densities and more developed heave industries. Various diagnostic tools were used to identify the potential sources of the POPs in the soil. The data indicated that DDTs and HCHs were from past and recent common inputs and that mixtures of several combustion activities (biomass, coal and petroleum combustion, diesel, gasoline, and vehicular emissions) were the major sources of PAHs in the Guiyang soil. The results provide information for the assessment of the extent of POP pollution in the Guiyang soil and can help authorities establish environmental protection regulations and soil remediation techniques.

A study using QSAR/QSPR models focused on the possible occurrence and risk of alloxydim residues from chlorinated drinking water, according to the EU Regulation

Any active substance with phytosanitary capacity intended to be marketed in Europe must pass exhaustive controls to assess its risk before being marketed and used in European agriculture. Since the implementation of Regulation (EC) No 1107/2009, agrochemical companies have been obliged to study the formation of pesticide transformation products (TPs) during the treatment of drinking water containing pesticide residues. However, there is no consensus on how to address this requirement. In this research work, the open literature collection on alloxydim was used to propose potential chlorination paths from alloxydim isomers. Furthermore, several QSAR/QSPR models have been used to fill the of knowledge gap relative to some key parameters in the physico-chemical, environmental and ecotoxicological areas of potential alloxydim TPs from chlorinated water for which little information exists. In this way, it has been possible to estimate the state of aggregation of these TPs (they exist mainly as liquids) as well as their ease of transit between the different phases, to predict their possible behaviour in the three environmental compartments (e.g., thermophysical properties point to a change in their evolution with respect to the parent alloxydim isomers) and to anticipate their potential risk to human and animal health (e.g., all of them cause developmental toxicity). These and other results highlight that the hazards of several TPs, i.e., both chlorinated and nonchlorinated from parent alloxydim or from those obtained after cleavage of the N - O bond and the subsequent reaction with chlorine, should be seriously considered. The obtained results reopen the debate on the implications of the use of QSAR/QSPR models for pesticide risk assessment in the legislative framework.

Photochemical degradation of persistent organic pollutants (PCDD/FS, PCBS, PBDES, DDTS and HCB) in hexane and fish oil

This study has investigated the photochemical degradation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polybrominated diphenylethers (PBDEs) and some organochlorine pesticides, such as hexachlorobenzene (HCB) or dichloro-diphenyl-trichloroethane (DDT) in hexane under UV irradiation at 254 nm. All pollutants were completely degraded after 3.5 h of exposition to the UV light. Moreover, this technique was applied to remove persistent organic pollutants from fish oil, with eliminations of a 34% for PCDD/Fs, 53% for PCBs, 59% for HCB, 67% for PBDEs and 73% for DDTs after 12 h of exposition to the UV light (254 nm). Dioxin-like PCBs increased their concentration after the treatment, probably due to the dehalogenation of other more chlorinated congeners. The fatty acids analysis of the fish oil revealed that the most important ω-3 fatty acids -EPA and DHA-were degraded to 67 and 70% of their initial content respectively. For these reasons elimination of persistent organic pollutants with photochemical treatment has limited applications for oils with food-purposes. However, it still can be a useful technique for decontamination of industrial oils.

Persistent organic pollutants in water resources: Fate, occurrence, characterization and risk analysis

Persistent organic pollutants (POPs) are organic chemicals that can persist in the environment for a longer period due to their non-biodegradability. The pervasive and bio-accumulative behavior of POPs makes them highly toxic to the environmental species including plants, animals, and humans. The present review specifies the POP along with their fate, persistence, occurrence, and risk analysis towards humans. The different biological POPs degradation methods, especially the microbial degradation using bacteria, fungi, algae, and actinomycetes, and their mechanisms were described. Moreover, the source, transport of POPs to the environmental sources, and the toxic nature of POPs were discussed in detail. Agricultural and industrial activities are distinguished as the primary source of these toxic compounds, which are delivered to air, soil, and water, affecting on the social and economic advancement of society at a worldwide scale. This review also demonstrated the microbial degradation of POPs and outlines the potential for an eco-accommodating and cost-effective approach for the biological remediation of POPs using microbes. The direction for future research in eliminating POPs from the environmental sources through various microbial processes was emphasized.

Vertical profiles of legacy organochlorine pesticides in sediment cores from lake Nakaumi, Japan

Two sediment core samples from the brackish Lake Nakaumi in Japan were analyzed to determine the historical profiles of organochlorine pesticides (OCPs). It was observed that from the 1940s to 2005, the vertical distribution of OCPs in sediment cores reflected the temporal trend of pesticide usage in Japan. Dichlorodiphenyltrichloroethane (DDT) and its metabolites were predominant, with concentrations of 0.008-8.27 ng g^-1 dry weight, and their contribution to ΣOCPs was over 58%. The results also confirmed that the DDTs in the sediment cores originated from past input. Further, even though hexachlorocyclohexanes were the most used OCP in Japan, their residual concentrations were lower than those of DDTs and chlordane related compounds (CHLs). The concentrations of CHLs were 0.163-1.539 ng g^-1 dry weight, whereas hexachlorobenzene (HCB), drins, heptachlor, and mirex showed very low concentrations. Interestingly, although HCB was never registered as a pesticide in Japan, it was detected in both core samples. This HCB contamination might be attributed to pentachlorophenol. Additionally, the hierarchical cluster analysis results corresponding to both sediment cores could be classified under four groups based on a similarity of over 50%. The results also showed that the OCP burden in Lake Nakaumi for the past 60 years was 130 kg and 1153 kg at Honjo and at the center of Lake Nakaumi, respectively. Overall, the results of this study indicate that the distribution of OCPs in Lake Nakaumi reflects the trend of pesticide usage in Japan.

Mechanisms of aerobic dechlorination of hexachlorobenzene and pentachlorophenol by Nocardioides sp. PD653

We sought to elucidate the mechanisms underlying the aerobic dechlorination of the persistent organic pollutants hexachlorobenzene (HCB) and pentachlorophenol (PCP). We performed genomic and heterologous expression analyses of dehalogenase genes in Nocardioides sp. PD653, the first bacterium found to be capable of mineralizing HCB via PCP under aerobic conditions. The hcbA1A2A3 and hcbB1B2B3 genes, which were involved in catalysing the aerobic dechlorination of HCB and PCP, respectively, were identified and characterized; they were classified as members of the two-component flavin-diffusible monooxygenase family. This was subsequently verified by biochemical analysis; aerobic dechlorination activity was successfully reconstituted in vitro in the presence of flavin, NADH, the flavin reductase HcbA3, and the HCB monooxygenase HcbA1. These findings will contribute to the implementation of in situ bioremediation of HCB- or PCP-contaminated sites, as well as to a better understanding of bacterial evolution apropos their ability to degrade heavily chlorinated anthropogenic compounds under aerobic conditions.

Managing soils of environmental significance: A critical review

Globally, environmentally significant soils (ESSs) mainly include acid sulfate, heavy metal(loid)-contaminated, petroleum hydrocarbon-contaminated, pesticide-contaminated, and radionuclide-contaminated soils. These soils are interrelated and have many common characteristics from an environmental management perspective. In this review, we critically evaluate the available literature on individual ESSs, aiming to identify common problems related to environmental quality/risk assessment, remediation approaches, and environmental regulation for these soils. Based on these findings, we highlight the challenges to, and possible solutions for sustainable ESS management. Contaminated land has been rapidly expanding since the first industrial revolution from the industrialized Western countries to the emerging industrialized Asia and other parts of the world. Clean-up of contaminated lands and slowdown of their expansion require concerted international efforts to develop advanced cleaner production and cost-effective soil remediation technologies in addition to improvement of environmental legislation, regulatory enforcement, financial instruments, and stakeholder involvement to create enabling environments. Two particular areas require further action and research efforts: developing a universal system for assessing ESS quality and improving the cost-effectiveness of remediation technologies. We propose an integrated framework for deriving ESS quality indicators and make suggestions for future research directions to improve the performance of soil remediation technologies.

Aerobic degradation of decabrominated diphenyl ether through a novel bacterium isolated from municipal waste dumping site: Identification, degradation and metabolic pathway

In the present study, a novel bacterium capable of degrading BDE-209 aerobically was isolated from a municipal waste dumping site and identified as Bacillus tequilensis strain BDE-S1 through 16S rRNA gene sequencing. A correlation between BDE-209 and bromide concentration, COD, TOC, and cell biomass was established. 65% of 50 mg/L initial concentration of BDE-209 was degraded within eight days of incubation by BDE-S1 strain. Two hexa, two penta, one tetra-BDE congener, and benzamide were detected as metabolites. The bromide release, COD, TOC and cell biomass were found to be significantly correlated parameters with BDE-209 degradation. Based on the metabolite analysis, ortho and meta debromination, cleavage of diphenyl ether bond and ring-opening were suggested as possible degradation pathways. This is the first study demonstrating the use of indigenously isolated Bacillus tequilensis strain BDE-S1 for aerobic degradation of BDE-209, which could provide new comprehension for bioremediation of PBDEs from contaminated environments.

Adsorption of lindane (γ-hexachlorocyclohexane) on nickel modified graphitic carbon nitride: a theoretical study

Adsorption of lindane (HCH) on nickel modified graphitic carbon nitride (Ni-gCN) was investigated using a novel, accurate and broadly parametrized self-consistent tight-binding quantum chemical (GFN2-xTB) method. Two graphitic carbon nitride (gCN) models were used: corrugated and planar, which represent the material with different thicknesses. Electronic properties of the adsorbates and adsorbent were estimated via vertical ionization potential, vertical electron affinity, global electrophilicity index and the HOMO and LUMO. Adsorption energy and population analyses were carried out to figure out the nature of the adsorption process. The results reveal that the introduction of the nickel atom significantly influences the electronic properties of gCN, and results in the improvement of adsorption ability of gCN for lindane. Lindane adsorption on Ni-gCN is considered as chemisorption, which is primarily supported by the interaction of the nickel atom and chlorine atoms of HCH. The effect of solvents (water, ethanol, acetonitrile) was investigated via the analytical linearized Poisson-Boltzmann model. Due to the strong chemisorption, Ni-gCN can collect lindane from different solvents. The adsorption configurations of HCH on Ni-gCN were also shown to be thermally stable at 298 K, 323 K, 373 K, 473 K, and 573 K via molecular simulation calculations. The obtained results are useful for a better understanding of lindane adsorption on Ni-gCN and for the design of materials with high efficiency for lindane treatment based on adsorption-photocatalytic technology.

An inadvertent issue of human retina exposure to endocrine disrupting chemicals: A safety assessment

Endocrine disrupting chemicals (EDCs) are a group of chemical compounds that present a considerable public health problem due to their pervasiveness and associations with chronic diseases. EDCs can interrupt the endocrine system and interfere with hormone homeostasis, leading to abnormalities in human physiology. Much attention has been focused on the adverse effects EDCs have on the reproductive system, neurogenesis, neuroendocrine system, and thyroid dysfunction. The eye is usually directly exposed to the surrounding environment; however, the influences of EDCs on the eye have received comparatively little attention. Ocular diseases, such as ocular surface diseases and retinal diseases, have been implicated in hormone deficiency or excess. Epidemiologic studies have shown that EDC exposure not only causes ocular surface disorders, such as dry eye, but also associates with visual deficits and retinopathy. EDCs can pass through the human blood-retinal barrier and enter the neural retina, and can then accumulate in the retina. The retina is an embryologic extension of the central nervous system, and is extremely sensitive and vulnerable to EDCs that could be passed across the placenta during critical periods of retinal development. Subtle alterations in the retinal development process usually result in profound immediate, long-term, and delayed effects late in life. This review, based on extensive literature survey, briefly summarizes the current knowledge about the impact of representative manufactured EDCs on retinal toxicity, including retinal structure alterations and dysfunction. We also highlight the potential mechanism of action of EDCs on the retina, and the predictive retinal models of EDC exposure.