Mechanical and biological properties of acrylic resins manipulated and polished by different methods

In vivo biocompatibility of silicon dioxide nanofilm used as antimicrobial agent on acrylic surface

the focus ofthis study was to testthe hypothesisthatthere would be no difference betweenthe biocompatibility of silicon dioxide nanofilms used as antimicrobial agents. Sixty male Wistar rats were divided into 4 groups (n=15): Group C (Control,Polyethylene), Group AR (Acrylic Resin), Group NP (Acrylic Resin coated with NP-Liquid), Group BG (Acrylic Resin coated with Bacterlon).the animals were sacrificed with 7,15 and 30 days and tissues analyzed as regardsthe events of inflammatory infiltrate, edema, necrosis, granulation tissue, mutinucleated giant cells, fibroblasts and collagen. Kruskal-Wallis and Dunn tests was used (P<0.05). Intense inflammatory infiltrate was shown mainly in Groups BG and AR, with significant difference from Control Group inthe time interval of 7days (P=0.004). Necrosis demonstrated significant difference between Group BG and Control Group (P<0.05) inthe time intervals of 7 days. For collagen fibers,there was significant difference betweenthe Control Group and Groups AR and BG inthe time interval of 7 days (P=0.006), and between BG and Control Groups inthe time intervals of 15 days (P=0.010).the hypothesis was rejected. Bacterlon demonstratedthe lowest level, and NP-Liquid Glassthe highest level of tissue compatibility, and best cell repair.the coating with NP-Liquid Glass was demonstrated to be highly promising for clinical use.

Effect of surface treatment of prefabricated teeth on shear bond strength of orthodontic brackets

Objective:

The aim of this in vitro study was to evaluate and compare the effects of grinding, drilling, sandblasting, and ageing prefabricated teeth (PfT) on the shear bond strength (SBS) of orthodontic brackets, as well as the effects of surface treatments on the adhesive remnant index (ARI).

Methods:

One-hundred-ninety-two PfT were divided into four groups (n = 48): Group 1, no surface treatment was done; Group 2, grinding was performed with a cylindrical diamond bur; Group 3, two drillings were done with a spherical diamond bur; Group 4, sandblasting was performed with 50-µm aluminum oxide. Before the experiment, half of the samples stayed immersed in distilled water at 37^oC for 90 days. Brackets were bonded with Transbond XT and shear strength tests were carried out using a universal testing machine. SBS were compared by surface treatment and by ageing with two-way ANOVA, followed by Tukey’s test. ARI scores were compared between surface treatments with Kruskal-Wallis test followed by Dunn’s test.

Results:

Surface treatments on PfT enhanced SBS of brackets (p< 0.01), result not observed with ageing (p= 0.45). Groups II, III, and IV showed higher SBS and greater ARI than the Group 1 (p< 0.05). SBS was greater in the groups 3 and 4 (drilling, sandblasting) than in the Group 2 (grinding) (p< 0.05). SBS and ARI showed a positive correlation (Spearman’s R²= 0.57; p< 0.05).

Conclusion:

Surface treatment on PfT enhanced SBS of brackets, however ageing did not show any relevance. Sandblasting and drilling showed greater SBS than grinding. There was a positive correlation between SBS and ARI.

Effect of Polymerization Cycles on Gloss, Roughness, Hardness and Impact Strength of Acrylic Resins

The aim of this study was to evaluate the conventional and boiled polymerization cycles on gloss, roughness, hardness and impact strength of acrylic resins. Samples were made for each Classico and QC-20 materials (n=10) in dental stone molds obtained from rectangular metallic matrices embedded in metallic flasks. The powder-liquid ratio and manipulation of the acrylic resins' were accomplished according to manufacturers' instructions and the resins were conventionally packed in metallic flasks. After polymerization by (1) conventional: 74 °C for 9 h (Classico) and (2) boiled: 20 min (QC-20) cycles, the samples were deflasked after cooling at room temperature and conventionally finished and polished. The properties were evaluated after storage in water at 37 °C for 24 h. Gloss was verified with Multi Gloss 268 meter (Konica Minolta), surface roughness was measured with Surfcorder SE 1700 rugosimeter (Kosaka), Knoop hardness number was obtained with HMV-200 microdurometer, and impact strength was measured in an Otto Wolpert-Werke device by Charpy system (40 kpcm). Data were subjected to Student's t-test (at α=0.05). The results were: Gloss: 67.7 and 62.2 for Classico and QC-20 resins, respectively; Surface roughness: 0.874 and 1.469 Ra-µm for Classico and QC-20, respectively; Knoop hardness: 27.4 and 26.9 for Classico and QC-20, respectively; and Impact strength: 37.6 and 33.6 kgf/cm2 for Classico and QC-20, respectively. No statistically significant difference (p>0.05)were found between the resins for the evaluated properties. In conclusion, conventional and boiled polymerization cycles had similar effects on gloss, roughness, hardness and impact strength of both Classico and QC-20 resins.

Evaluation of antibiofilm and mechanical properties of new nanocomposites based on acrylic resins and silver vanadate nanoparticles

OBJECTIVE

The purpose of this study was evaluate, for the first time, the impact of incorporation of nanostructured silver vanadate (β-AgVO3) in antibiofilm and mechanical properties of dental acrylic resins (poly(methyl methacrylate), PMMA).

DESIGN

The β-AgVO3 was synthesized and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, and microanalysis (SEM/EDS). Resins specimens were prepared with 0-10% wt.% β-AgVO3 and characterized by SEM, XRD and optical microscopy. The antibiofim activity of the samples against Candida albicans and Streptococcus mutans was investigated by XTT reduction test, colony-forming units (CFUs), and confocal laser scanning microscopy (CLSM). The flexural strength, hardness, and surface roughness of the samples containing β-AgVO3 were compared with the pure PMMA matrix.

RESULTS

The incorporation of 10% β-AgVO3 significantly reduced the metabolic activity of C. albicans and S. mutans (p<0.05). There was a reduction in microbial load (CFU/mL) of microorganisms for the different concentrations used (p<0.05), which was confirmed by confocal microscopy. The addition of β-AgVO3 did not change the mechanical properties of hardness and surface roughness of the resins (p>0.05). However, flexural strength decreased with the addition of amounts greater than 1% (p<0.05).

CONCLUSIONS

β-AgVO3 additions in dental acrylic resin may have an impact on inhibition of biofilm of main microorganisms associated with dental prostheses. However, the viability of clinical use should be evaluated in function of changed promoted in some mechanical properties.