STUDY OF SOLUBILITY IN SUPERCRITICAL FLUIDS: THERMODYNAMIC CONCEPTS AND MEASUREMENT METHODS - A REVIEW

Supercritical fluid technology as a sustainable alternative method for textile dyeing: An approach on waste, energy, and CO2 emission reduction

The clothing industry is considered one of the most polluting industries on the planet due to the high consumption of water, energy, chemicals/dyes, and high generation of solid waste and effluents. Faced with environmental concerns, the textile ennoblement sector is the most critical of the textile production chain, especially the traditional dyeing processes. As an alternative to current problems, dyeing with supercritical CO2 (scCO2) has been presented as a clean and efficient process for a sustainable textile future. Supercritical fluid dyeing (SFD) has shown a growing interest due to its significant impact on environmental preservation and social, economic, and financial gains. The main SFD benefits include economy and reuse of non-adsorbed dyes; reduction of process time and energy expenditure; capture of atmospheric CO2 (greenhouse gas); use and recycling of CO2 in SFD; generation of carbon credits; water-free process; effluent-free process; reduction of CO2 emission and auxiliary chemicals. Despite being still a non-scalable and evolving technology, SFD is the future of dyeing. This review presented a comprehensive overview of the environmental impacts caused by traditional processes and confronted the advantages of SFD. The SFD technique was introduced, along with its latest advances and future perspectives. Financial and environmental gains were also discussed.

Characterisation of the Enzymatically Extracted Oat Protein Concentrate after Defatting and Its Applicability for Wet Extrusion

An oat protein concentrate (OC1) was isolated from oat flour through starch enzymatic hydrolysis, by subsequent defatting by ethanol and supercritical fluid extraction (SFE) reaching protein concentrations of 78% and 77% by weight in dry matter, respectively. The protein characterisation and functional properties of the defatted oat protein concentrates were evaluated, compared and discussed. The solubility of defatted oat protein was minor in all ranges of measured pH (3-9), and foamability reached up to 27%. Further, an oat protein concentrate defatted by ethanol (ODE1) was extruded by a single screw extruder. The obtained extrudate was evaluated by scanning electron microscope (SEM), texture and colour analysers. The extrudate's surface was well formed, smooth, and lacking a tendency to form a fibrillar structure. Textural analysis revealed a non-unform structure (fracturability 8.8-20.9 kg, hardness 26.3-44.1 kg) of the oat protein extrudate.

Optimization of Extraction of Natural Antimicrobial Pigments Using Supercritical Fluids: A Review

It has become increasingly popular to replace chemically synthesized compounds with natural counterparts mostly found in natural sources, such as natural pigments. The conventional extraction processes for these compounds are limited by the toxicity and flammability of the solvents. To obtain pure extracts, it is always a longer process that requires several steps. Supercritical fluid extraction (SFE) is a cutting-edge green technology that is continuously increasing and expanding its fields of application, with benefits such as no waste produced, shorter extraction time, automation, and lower solvent consumption. The SFE of natural pigments has high potential in food, textiles, cosmetics, and pharmaceuticals; there are a number of other applications that can benefit from the SFE technique of natural pigments. The pigments that are extracted via SFE have a high potential for application and sustainability because of their biological and antimicrobial properties as well as low environmental risk. This review provides an update on the SFE technique, specifically as it pertains to the optimization of health-promoting pigments. This review focuses on antimicrobial pigments and the high efficiency of SFE in extracting pure antimicrobial pigments. In addition, the optimal conditions, biological activities, and possible applications of each category are explained.

Review on metal dissolution characteristics and harmful metals recovery from electronic wastes by supercritical water

Supercritical water (SCW) technology can be applied as an efficient and environment-friendly method to recover toxic or complex chemical wastes. Separation and chemical reactions under supercritical conditions may be realized by changing the temperature, pressure, and other operating parameters to adjust the physical and chemical properties of water. However, salt deposition and corrosion are often encountered during the treatment of inorganic substances, which will hinder the commercial applications of SCW technology. The solubility of salt in high pressure/temperature water forms the theoretical basis for studying the recovery of metal salts in supercritical water and understanding salt deposition. Therefore, this work systematically and objectively reviews different research methods used to analyze salt solubility in high pressure/temperature water, including the experimental method, prediction theoretical modeling, and computer simulation method; the research status and existing data of this parameter are also analyzed. The purpose of this review is to provide ideas and references for follow-up research by providing a comprehensive overview of salt solubility research methods and the current situation. Suggestions for more efficient metal recovery through technology integration are also provided.

Supercritical Fluid Extraction of Fucoxanthin from the Diatom Phaeodactylum tricornutum and Biogas Production through Anaerobic Digestion

Phaeodactylum tricornutum is the marine diatom best known for high-value compounds that are useful in aquaculture and food area. In this study, fucoxanthin was first extracted from the diatom using supercritical fluid extraction (SFE) and then using the extracted diatom-like substrate to produce bioenergy through anaerobic digestion (AD) processes. Factors such as temperature (30 °C and 50 °C), pressure (20, 30, and 40 MPa), and ethanol (co-solvent concentration from 10% to 50% v/v) were optimized for improving the yield, purity, and recovery of fucoxanthin extracted using SFE. The highest yield (24.41% w/w) was obtained at 30 MPa, 30 °C, and 30% ethanol but the highest fucoxanthin purity and recovery (85.03mg/g extract and 66.60% w/w, respectively) were obtained at 30 MPa, 30 °C, and 40%ethanol. Furthermore, ethanol as a factor had the most significant effect on the overall process of SFE. Subsequently, P.tricornutum biomass and SFE-extracted diatom were used as substrates for biogas production through AD. The effect of fucoxanthin was studied on the yield of AD, which resulted in 77.15 ± 3.85 LSTP CH4/kg volatile solids (VS) and 56.66 ± 1.90 LSTP CH4/kg VS for the whole diatom and the extracted P.tricornutum, respectively. Therefore, P.tricornutuman can be considered a potential source of fucoxanthin and methane and both productions will contribute to the sustainability of the algae-biorefinery processes.

Biopesticide Encapsulation Using Supercritical CO2: A Comprehensive Review and Potential Applications

As an alternative to synthetic pesticides, natural chemistries from living organisms, are not harmful to nontarget organisms and the environment, can be used as biopesticides, nontarget. However, to reduce the reactivity of active ingredients, avoid undesired reactions, protect from physical stress, and control or lower the release rate, encapsulation processes can be applied to biopesticides. In this review, the advantages and disadvantages of the most common encapsulation processes for biopesticides are discussed. The use of supercritical fluid technology (SFT), mainly carbon dioxide (CO₂), to encapsulate biopesticides is highlighted, as they reduce the use of organic solvents, have simpler separation processes, and achieve high-purity particles. This review also presents challenges to be surpassed and the lack of application of SFT for biopesticides in the published literature is discussed to evaluate its potential and prospects.

Supercritical-CO2 extraction, identification and quantification of polyprenol as a bioactive ingredient from Irish trees species

This study ascertained the accumulation of polyprenol from four Irish conifer species Picea sitchensis, Cedrus atlantica ‘Glauca’, Pinus sylvestris and Taxus baccata and one flowering tree Cotoneaster hybrida using supercritical fluid extraction with carbon dioxide (SFE-CO₂) and solvent extraction. The effects of SFE-CO₂ parameters such as temperature (ranged from 40 to 70 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^\circ{\rm C}$$\end{document}∘C), pressure (ranged from 100 to 350 bars) and dynamic time (from 70 min to 7 h) were analysed on the extraction efficiency of polyprenol. Qualitative and quantitative analysis of polyprenol was examined using high-performance liquid chromatography. Results showed that P. sylvestris accumulated the highest polyprenol yield of 14.00  ± \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0.4$$\end{document}0.4mg g⁻¹ DW when extracted with hexane:acetone (1:1 v/v). However, with SFE-CO₂ conditions of 200 bars, 70 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^\circ{\rm C}$$\end{document}∘C, 7 h, with absolute ethanol as a cosolvent with a flow rate of 0.05 ml min⁻¹, P. sitchensis accumulated the highest polyprenol yield of 6.35 ± \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$0.4$$\end{document}0.4 mg g⁻¹DW. This study emphasised the potential application of SFE-CO₂ in the extraction of polyprenol as an environmentally friendly method to be used in pharmaceutical and food industries.