Assessment of toxicity and oxidative DNA damage of sodium hypochlorite, chitosan and propolis on fibroblast cells

New Insights Regarding the Use of Relevant Synthetic Compounds in Dentistry

Worldwide, synthetic compounds are used for both in-office and at-home dental care. They are a valuable resource for both prophylactic and curative treatments for various dental problems, such as tooth decay, periodontal diseases, and many more. They are typically preferred due to their broad range of actions and ability to produce targeted, rapid, and long-lasting effects. Using a 0.12% chlorhexidine mouthwash is capable of reducing the plaque index from 47.69% to 2.37% and the bleeding index from 32.93% to 6.28% after just 2 weeks. Mouthwash with 0.1% OCT is also highly effective, as it significantly lowered the median plaque index and salivary bacterial counts in 152 patients in 5 days compared to a control group (p < 0.0001), while also reducing the gingival index (p < 0.001). When povidone-iodine was used as an irrigant during the surgical removal of mandibular third molars in 105 patients, it resulted in notably lower pain scores after 2 days compared to a control group (4.57 ± 0.60 vs. 5.71 ± 0.45). Sodium hypochlorite is excellent for root canal disinfection, as irrigating with 1% NaOCl completely eliminated the bacteria from canals in 65% patients. A 0.05% CPC mouthwash proved effective for perioperative patient care, significantly decreasing gingival bleeding (p < 0.001) and suppressing Streptococcus levels even one week post-surgery. Lastly, a 6% H2O2 paint-on varnish and 6% H2O2 tray formulations successfully bleached the teeth of 40 patients, maintaining a noticeably whiter appearance up to the 6-month follow-up, with significant color differences from the baseline (p < 0.005). Synthetic compounds have a large research base, which also provides a greater awareness of their mechanism of action and potential adverse effects. For a better understanding of how they work, several methods and assays are performed. These are protocolary techniques through which a compound's efficacy and toxicity are established.

Effect of sodium hypochlorite gel on bacteria associated with periodontal disease

OBJECTIVES

An adjunct in non-surgical periodontal therapy might be sodium hypochlorite (NaOCl)-based agents. The purpose of the present in vitro study was to get deeper knowledge on the influence of different parameters as time after mixing, pH, and chemical composition of an amino acid 0.475% NaOCl (AA-NaOCl) gel consisting of two components on its anti-biofilm activity.

MATERIALS AND METHODS

Six-species biofilms were cultured for 5 days, before AA-NaOCl gel was applied. In the different series, the influence of the time after mixing of the two components before application, of the concentration of NaOCl in the gel mixture, of the pH of the gel mixture, and of an exchange of the amino acid component by hyaluronic acid (HA), was analyzed.

RESULTS

Mixing time point experiments showed that the AA-NaOCl gel is capable of statistically significantly reducing colony-forming unit (cfu) counts up to 30 min after mixing, but only up to 20 min after mixing the reduction was more than 2 log10 cfu. The pH experiments indicate that a reduced pH results in a reduced activity of the NaOCl formulation. NaOCl concentrations in the formulation in the range from 0.475 to 0.2% provide adequate activity on biofilms. A HA/NaOCl gel was equally active against the biofilm as the AA-NaOCl gel.

CONCLUSION

Mixing of the components should be made in a timeframe of 20 min before applications. An optimization of the composition of the NaOCl formulation might be possible and should be a topic in further in vitro studies.

CLINICAL RELEVANCE

The AA-NaOCl gel formulation can be mixed up to 20 min before application. Further, the study indicates that the composition of the NaOCl gel formulation can be optimized.

Research methods assessing sodium hypochlorite cytotoxicity: A scoping review

Sodium hypochlorite (NaOCl) cytotoxicity has been assessed using different methodologies, which has led to arbitrary interpretations. This scoping review aimed to discuss the different methodological protocols for assessing NaOCl cytotoxicity. A literature review performed in the PubMed and Embase databases up to July 2023 identified manuscripts reporting NaOCl cytotoxicity. The dataset identified 546 publications, further screened by 2 reviewers. Ninety studies were identified and mined methodologically to collect information on cell type, cytotoxicity assay, NaOCl dilution solutions, presence of fetal bovine serum (FBS), and NaOCl exposure time. The culture medium used in cytotoxicity assays contains buffering substances that neutralize the pH of NaOCl, thus reducing its cytotoxicity, an approach that may lead to bias when solutions with different pH are compared. For short exposure periods, as in simulations to evaluate the contact between irrigant and periapical tissue cells during chemo-mechanical preparation, NaOCl dilution should be performed with saline, which does not buffer the irrigant. For long exposure periods, as in simulations of irrigant extrusions, NaOCl should be diluted in the culture medium, to reproduce the expected buffering effect occurring in extrusions. The presence of FBS in culture medium can decrease NaOCl toxicity. There is no standardization of NaOCl cytotoxicity methodologies. This poses the risk of arriving at incorrect results and, therefore, pertinent tests must be refined.

In vitro assessment of antimicrobial potential of low molecular weight chitosan and its ability to mechanically reinforce and control endogenous proteolytic activity of dentine

AIMS

Chitosan-based biomaterials exhibit several properties of biological interest for endodontic treatment. Herein, a low molecular weight chitosan (CH) solution was tested for its antimicrobial activity against Enterococcus faecalis (E. faecalis) and effects on dentine structure.

METHODOLOGY

The root canal of 27 extracted uniradicular teeth were biomechanically prepared, inoculated with a suspension of E. faecalis and randomly assigned to be irrigated with either 5.25% sodium hypochlorite (NaClO), 0.2% CH or sterile ultrapure water (W). Bacteriologic samples were collected from root canals and quantified for of E. faecalis colony-forming units (CFUs). The effectiveness of CH over E. faecalis biofilms was further measured using the MBEC Assay®. Additionally, dentine beams and dentine powder were obtained, respectively, from crowns and roots of 20 extracted third molars. Dentine samples were treated or not with 17% EDTA and immersed in either CH or W for 1 min. The effects of CH on dentine structure were evaluated by assessment of the modulus of elasticity, endogenous proteolytic activity and biochemical modifications.

RESULTS

The number of E. faecalis CFUs was significantly lower for samples irrigated with CH and NaClO. No significant differences were found between CH and NaClO treatments. Higher modulus of elasticity and lower proteolytic activity were reported for dentine CH-treated specimens. Chemical interaction between CH and dentine was observed for samples treated or not with EDTA.

CONCLUSIONS

Present findings suggest that CH could be used as an irrigant during root canal treatment with the triple benefit of reducing bacterial activity, mechanically reinforcing dentine and inhibiting dentine proteolytic activity.

Health consequences of disinfection against SARS-CoV-2: Exploring oxidative stress damage using a biomonitoring approach

Individuals who get involved in the disinfection of public settings using sodium hypochlorite might suffer adverse health effects. However, scarce information is available on the potential oxidative stress damage caused at low concentrations typically used for disinfection. We aimed to assess whether exposure to sodium hypochlorite during the COVID-19 pandemic causes oxidative stress damage in workers engaged in disinfection tasks. 75 operators engaged in the disinfection of public places were recruited as the case group, and 60 individuals who were not exposed to disinfectant were chosen as the control group. Spot urine samples were collected before (BE) and after exposure (AE) to disinfectants in the case group. Likewise, controls provided two spot urine samples in the same way as the case group. Urinary malondialdehyde (MDA) levels were quantified by forming thiobarbituric acid reactive substances in the urine. In addition, the concentration of 8-hydroxy-2'-deoxyguanosine (8-OHdG) in the urine was determined using an ELISA kit. Results showed significant differences in the urinary levels of oxidative stress markers, where median 8-OHdG (AE case: 3.84 ± 2.89 μg/g creatinine vs AE control 2.54 ± 1.21 μg/g creatinine) and MDA (AE case: 169 ± 89 μg/g creatinine vs AE control 121 ± 47 μg/g creatinine) levels in case group AE samples were 1.55 and 1.35-times higher than the control group AE samples (P < 0.05), respectively. Besides, urinary levels of oxidative stress markers in AE samples of the case group were significantly higher than in BE samples (8-OHdG BE 3.40 ± 1.95 μg/g creatinine, MDA BE 136 ± 51.3 μg/g creatinine, P < 0.05). Our results indicated that exposure to even low levels of sodium hypochlorite used in disinfection practices might cause oxidative stress related damage. With this in mind, implementing robust protective measures, such as specific respirators, is crucial to reduce the health burdens of exposure to disinfectants.

Antibacterial, antibiofilm, and cytotoxic activities and chemical compositions of Peruvian propolis in an in vitro oral biofilm

Background: Natural products with antibacterial potential have begun to be tested on biofilm models, bringing us closer to understanding the response generated by the complex microbial ecosystems of the oral cavity. The objective of this study was to evaluate the antibacterial, antibiofilm, and cytotoxic activities and chemical compositions of Peruvian propolis in an in vitro biofilm of Streptococcus gordonii and Fusobacterium nucleatum.

Methods: The experimental work involved a consecutive, in vitro, longitudinal, and double-blinded study design. Propolis samples were collected from 13 different regions of the Peruvian Andes. The disk diffusion method was used for the antimicrobial susceptibility test. The cytotoxic effect of propolis on human gingival fibroblasts was determined by cell viability method using the MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay, and the effect of propolis on the biofilm was evaluated by confocal microscopy and polymerase chain reaction (PCR).

Results: The 0.78 mg/mL and 1.563 mg/mL concentrations of the methanolic fraction of the chloroform residue of Oxapampa propolis showed effects on biofilm thickness and the copy numbers of the srtA gene of S. gordonii and the radD gene of F. nucleatum at 48 and 120 hours, and chromatography (UV, λ 280 nm) identified rhamnocitrin, isorhamnetin, apigenin, kaempferol, diosmetin, acacetin, glycerol, and chrysoeriol.

Conclusions: Of the 13 propolis evaluated, it was found that only the methanolic fraction of Oxapampa propolis showed antibacterial and antibiofilm effects without causing damage to human gingival fibroblasts. Likewise, when evaluating the chemical composition of this fraction, eight flavonoids were identified.

Nanoparticles in Dentistry: A Comprehensive Review

In recent years, nanoparticles (NPs) have been receiving more attention in dentistry. Their advantageous physicochemical and biological properties can improve the diagnosis, prevention, and treatment of numerous oral diseases, including dental caries, periodontal diseases, pulp and periapical lesions, oral candidiasis, denture stomatitis, hyposalivation, and head, neck, and oral cancer. NPs can also enhance the mechanical and microbiological properties of dental prostheses and implants and can be used to improve drug delivery through the oral mucosa. This paper reviewed studies from 2015 to 2020 and summarized the potential applications of different types of NPs in the many fields of dentistry.

Push-Out Bond Strength, Characterization, and Ion Release of Premixed and Powder-Liquid Bioceramic Sealers with or without Gutta-Percha

OBJECTIVE

To evaluate the push-out bond strength of premixed and powder-liquid bioceramic sealers with or without gutta-percha (GP) cone.

MATERIALS AND METHODS

Radicular dentin samples were prepared from 80 single-rooted human teeth. After root canal preparation using ProTaper® and irrigation with NaOCl and EDTA, teeth were divided according to the root canal sealer (n = 20): AH Plus®, EndoSequence® BC Sealer™, ProRoot® Endo Sealer, and BioRoot™ RCS. Samples were randomly divided into two subgroups (n = 10): GP-S: root canal filling using the single-cone technique, or S: filling with only sealer. Specimens were kept at 37°C and 100% humidity in calcium-free PBS for 30 days. The push-out bond strength was measured in MPa. Fractured specimens were observed at 25x to evaluate the type of failure. pH and calcium ion release were measured at different experimental periods. Raman and SEM-EDAX analyses were performed for root canal sealers. Data were analysed using three-way analysis of variance (ANOVA) and post hoc Tukey test at a significance of P < 0.05.

RESULTS

Push-out bond strength was greater for samples obturated with only sealers (S) than samples obturated with the single-cone technique (GP-S) (P < 0.05). BioRoot™ RCS had greater bond strength than EndoSequence® BC Sealer™. Adhesive failures between cement and gutta-percha cone (87.5%) were predominant in the GP-S. Cohesive failures were predominant for S (80%). BioRoot™ RCS and ProRoot® ES presented higher alkalinization potential than the premixed sealer (EndoSequence® BC Sealer™). Powder-liquid bioceramic sealers (BioRoot™ RCS and ProRoot® ES) released the highest cumulative amount of calcium (28.46 mg/L and 20.05 mg/L).

CONCLUSION

Push-out test without gutta-percha cone presents higher bond strength for bioceramic sealers. Powder-liquid calcium silicate-based sealers present greater bioactivity related to alkalinization potential and calcium ion release.

Biocompatibility of the 8.25% sodium hypochlorite irrigant solution in endodontics: An in vivo study

The biocompatibility of irrigant solutions, including 8.25% sodium hypochlorite (NaOCl), was analyzed in samples (n = 25) of chorioallantoic membranes (CAM) from embryos of the Gallus gallus, using the hen's egg test on chorioallantoic membrane (HET-CAM). The following irrigants were tested: saline (control), 2% chlorhexidine (2% CHX), and NaOCl (2.5%, 5.25%, and 8.25%), and morphological and microcirculatory changes were investigated. Images were selected and quantified with Image J®. The macroscopic data were submitted to ANOVA, followed by the Tukey's test (p < .05); non-parametric Kruskal-Wallis and Mann-Whitney tests were applied to histological data (p < .05). The frequency of hyperemia differed significantly in the 8.25% NaOCl compared to the other groups, with the exception of 5.25% NaOCl (p = .096). Coagulation was more frequent in the 2% CHX group, differing significantly from the 2.5% NaOCl group (p = .038). In mean values, NaOCl 8.25% caused the decrease (NaOCl = 2.60, and control = 5.00) of vessels in the microcirculation, as well as triggered the increase (NaOCl = 425.50, and control 44.50) of inflammatory cells in the observed areas. There was necrosis in all samples in the 5.25% NaOCl group and in 80% in the 2% CHX, 2.5% NaOCl, and 8.25% NaOCl groups. Fibroblasts were detected only in the control group. It was concluded that the 8.25% NaOCl solution showed significantly high toxicity on CAM. However, these results were comparable to the other concentrations of NaOCl and to 2% CHX. Thus, in this experimental protocol, 8.25% NaOCl proved to be viable as an irrigant solution.