Non-surgical treatment of transverse deficiency in adults using Microimplant-assisted Rapid Palatal Expansion (MARPE)

Degree and pattern of expansion of commercially available and custom-fabricated miniscrew-assisted rapid palatal expansion systems in young adult patients: A retrospective comparative analysis

BACKGROUND

Miniscrew-assisted rapid palatal expansion (MARPE) has emerged as a noteworthy non-surgical method for treating maxillary transverse deficiency, especially in young adult patients. Studies have shown that MARPE can achieve significant dentoalveolar and skeletal expansion with long-term stability. The primary objective of this study was to assess the skeletal changes in the maxillary transverse dimension, and the secondary objective was to evaluate the dentoalveolar changes, following the use of a commercially available maxillary skeletal expander (MSE) in comparison to a custom-fabricated MARPE.

METHODS

This retrospective study involved 50 young adult patients diagnosed with skeletal transverse maxillary deficiency, divided into two groups (MSE and custom MARPE), with 25 patients in each group. Pre- and post-expansion cone-beam computed tomography (CBCT) images were used to analyse skeletal, alveolar, and dental changes.

RESULTS

Both MSE and custom MARPE groups achieved significant skeletal and dentoalveolar expansion. However, the custom MARPE group exhibited notably greater expansion in several metrics; in the axial plane, the average expansion was 4.68±1.35mm and 3.37±1.53mm at the anterolateral maxillary walls and 3.99±1.35mm and 3.28±1.19mm at the greater palatine foramen region for custom MARPE and MSE groups, respectively (P<0.01). In coronal plane, the custom MARPE showed significantly greater transverse expansion at the mid-nasal, basal, alveolar, and dental levels.

CONCLUSION

Both MARPE systems are effective for maxillary expansion. However, the custom-fabricated MARPE may offer more favourable results, with broader and more uniform skeletal expansion. This can be especially beneficial for patients with specific anatomical requirements.

Analysis of changes and correlation in condyle-fossa relationship after maxillary skeletal expansion

OBJECTIVE

To investigate the changes in condyle-glenoid fossa relationship after maxillary skeletal expansion (MSE) and to verify the correlation between the condyle positional changes and expansion effect.

METHODS

In this study, 20 patients (mean age 21.1 ± 5.7 years, 8 male, 12 female) with maxillary transverse deficiency (MTD) were treated with the MSE appliance, which contained molar bands and a expander with four micro-implants. The CBCT images were taken before expansion (T0), after expansion (T1) and after 6 months of maintenance (T2). The posterior TMJ space (PS), superior TMJ space (SS), anterior TMJ space, coronal lateral TMJ space (CLS), coronal medial TMJ space (CMS), condyle axis angle, maxillary basal bone width (BWM), inter-molars width, nasal bone width, molar inclination and molar palatal cusp height (U6H) were measured using Dolphin Imaging.

RESULTS

At T1, compared with T0, the PS and SS significantly increased by 0.41 mm (P = .008) and 0.3 mm (P = .007). But only the SS significantly increased by 0.21 mm (P = .025) at T2. There was a significant difference of 0.37 mm (left-right, P = .014) between the left and right SS at T0, but no significant difference at T1 and T2. The increased BMW showed weak positive correlations with the change of PS (P = .015) and CMS (P = .031), and the decreased U6H showed weak negative correlations with the change of PS (P = .015) and CLS (P = .031) at T1.

CONCLUSIONS

The use of MSE led to an increase in the SS and PS, which were weakly correlated with BWM and U6H. But this effect in the TMJ space gradually diminished after 6 months of maintenance, and the symmetry of the condyle-fossa relationship was preserved.

Analysis of Stress Distribution and Displacement Based on the Miniscrew Positions of the Palatal Slope Bone-borne Expander: A Finite Element Study

OBJECTIVES

 This study aimed to investigate the stress distribution pattern of the palatal slope bone-borne expander on the maxillary area according to a different anteroposterior position of anchored miniscrews using finite element analysis.

MATERIALS AND METHODS

 Nasomaxillary stereolithography files with three different anteroposterior anchored miniscrew positions of the palatal slope bone-borne expander were determined as model A, B, and C. Each model consists of four supported miniscrews. Model A: two anterior miniscrews were located between the maxillary canine and the first premolar, and two posteriors between the second premolar and the first molar. Model B: two anteriors were between the lateral incisor and the canine, and two posteriors were the same as in model A. Model C: two anteriors were the same as in model A, and two posteriors were distal to the first molar. One turn of expander screws was applied. Maximum principal stress, equivalent elastic strain, equivalent von Mises stress, and transverse displacement were evaluated.

RESULTS

 The maximum principal stress was mostly found at the bone-miniscrew interface. Model A exhibited an intersecting area of stress between the supported miniscrews. The highest value of principal stress was in model B, while model C showed a uniform distribution pattern. The elastic strain pattern was similar to the principal stress in all models. The highest value of equivalent von Mises stress was located on the expander screw. The largest amount of transverse displacement of teeth was in model A, while model C exhibited a more consistent transverse displacement than other models. Vertical displacement of posterior teeth was also noticed.

CONCLUSION

 Based on the result, it revealed that the various anteroposterior miniscrew placements of the palatal slope bone-borne expander had various patterns of stress distribution and resulted in various outcomes. It may be inferred that model A's miniscrew location was advantageous for obtaining expansion quantities, but model C's miniscrew position was advantageous for maintaining consistent biomechanics.

Management of Class III Malocclusion with Microimplant-Assisted Rapid Palatal Expansion (MARPE) and Mandible Backward Rotation (MBR): A Case Report

Class III malocclusion prevalence varies significantly among racial groups, with the highest prevalence observed in southeast Asian populations at 15.80%. These malocclusions often involve maxillary retrognathism, mandibular prognathism, or both, accompanied by maxillary constriction and crossbites. Comprehensive treatment should address anteroposterior, transverse, and vertical imbalances. Microimplant-assisted rapid palatal expansion (MARPE) has shown high success rates for transverse maxillary expansion in late adolescents and adults, presenting a viable alternative to surgically-assisted rapid palatal expansion (SARPE). This case report aims to demonstrate the successful treatment of a young adult female with borderline Class III malocclusion using MARPE and mandibular backward rotation (MBR) techniques. A 21-year-old female presented with a Class III skeletal pattern, anterior/posterior crossbites, and mild dental crowding. Despite her concerns about a concave facial profile, the patient declined orthognathic surgery due to a negative experience reported by a friend. The treatment plan included MARPE to correct maxillary transverse deficiency and MBR to alleviate Class III malocclusion severity. Lower arch distalization was performed using temporary anchorage devices (TADs) on the buccal shelves, and Class II elastics were used to maintain MBR and prevent retroclination of the lower labial segment during anterior retraction. Significant transverse correction was achieved, and the severity of Class III malocclusion was reduced. The lower dentition was effectively retracted, and the application of Class II elastics helped maintain MBR. The patient's final facial profile was harmonious, with well-aligned dentition and a stable occlusal relationship. The treatment results were well-maintained after one year. The MARPE with MBR approach presents a promising alternative for treating borderline Class III cases, particularly for patients reluctant to undergo orthognathic surgery. This case report highlights the effectiveness of combining MARPE and MBR techniques in achieving stable and satisfactory outcomes in the treatment of Class III malocclusion.

MARPE expander activation load with different configurations of extender arms heights: in-vitro evaluation

OBJECTIVE

Evaluate the load mini-implants exert on the artificial bone when expanding the MARPE EX in three different extension arm configurations.

METHODS

A device simulating the human palate was fabricated and attached to a universal testing machine, for conducting tests with different MARPE expanders (n=5): non-adjustable/control (MARPE SL, Peclab) or with low, intermediate, and high extender arms (MARPE EX, Peclab). The expanders were manually activated until failure of the device occurred, and maximum load values were recorded. Load averages were also calculated for every five activations until the twentieth activation.

RESULTS

The generalized linear mixed model for repeated measures over time showed that there was significant increase in load with activations for all expanders (p=0.0004). Up to the twentieth activation, the expander with low extender arms presented higher load than the others, while the expander with high extender arms showed lower load values (p<0.05). There was no significant difference among expanders regarding the number of activations (p=0.0586), although there was a trend towards fewer activations until fracture for the control expander. It was observed that the higher the configuration, the lower the force the mini-implants delivered to the bone. The control expander provided a force magnitude similar to that of the adjustable expander when positioned at the intermediate height.

CONCLUSIONS

The activation load of MARPE expanders is influenced by the type of presentation of the extensor arms, with higher configurations resulting in lower force delivered by the mini-implants to the bone.

Evaluation of Palatal Thickness for the Placement of MARPE Device among a Cohort of Iraqi-Kurdish Population: A Retrospective CBCT Study

Objectives

This study aimed to evaluate and compare palatal thickness in adults for the placement of mini-implants for miniscrew-assisted rapid palatal expansion (MARPE) appliances using cone-beam computed tomography (CBCT) in a sample of Iraqi-Kurdish people.

Materials and Methods

CBCT scans from 68 Kurdish patients, aged between 18 and 30 years, were assessed retrospectively. Of these, 37 were males and 31 were females. The measurements were performed at 3 mm from the mid-palatal suture. T-zone was selected for the anterior points, at the level of the palatal cusps of 2nd premolars, and the posterior point at the level of mesio-palatal cusps of 1st molars bilaterally. Palatal thickness of males and females bilaterally, as well as anterior and posterior areas, were measured and compared. An independent t-test was applied for comparison for normally distributed data, and the Mann-Whitney test was utilized for nonnormally distributed data. Additionally, Bonferroni correction was implemented for p-value adjustment.

Results

The mean palatal thickness at the anterior area was 6.06 mm for males, 6.17 mm for females on the right side, 5.94 mm for males, and 5.99 mm for females on the left side. The mean palatal thickness at the posterior area was almost the same for both genders (4.40 mm for males and 4.44 mm for females) on the right side, 4.35 mm for males, and 4.54 mm for females on the left side. Statistically, no significant difference was recorded between males and females, as well as right and left sides in both anterior and posterior regions; however, a very highly statistically significant difference (p  < 0.001) was recorded when comparing total thickness, including both hard and soft tissue, between anterior and posterior regions.

Conclusions

CBCT proves a highly effective modality in assessing palatal thickness and suggesting ideal locations for orthodontic mini-screw placement. Our examination of palatal thickness in a sample of Iraqi-Kurdish individuals revealed no statistical difference between genders or sides, but significant variations were noted between anterior and posterior thicknesses. Comprehensive clinical and pre-expansion CBCT evaluations are crucial for precisely determining the optimal placement of MARPE devices in each patient, ensuring successful outcomes.

Miniscrew-assisted rapid palatal expansion (MARPE): Factors influencing planning

OBJECTIVE

This cross-sectional study evaluated the bone thickness on mini-implants insertion site, the factors that influence the digital planning of MARPE appliance (miniscrew-assisted rapid palatal expansion), and its different designs.

METHODS

A total of 135 plannings were assessed regarding the size of the expander screw used, the positioning and the type of the mini-implant rings, and their location in relation to the teeth. Bone thickness measurements were assessed in the region of the mini-implants' trajectory. Differences between the sexes was verified using the ANOVA test (5% significance).

RESULTS

73 cases were planned with 4 mini-implants and 62 cases, with 6 mini-implants. In 90% of cases, teeth #16 and #26 were used as supports, and the most used expander screw was 13mm (64.1% of cases). The anterior mini-implants of conventional MARPE showed more pronounced insertion in bone in males (5.9 ± 2mm; p= 0.025). The extra mini-implants (anterior region) were inserted with greater bone thickness in males (11.1 ± 2.3mm) compared to females (9.9 ± 1.8mm; p=0.041). A greater bone thickness was observed in males (10.1 ± 2.1 mm) when using mini-implants in the paramedian region.

CONCLUSION

Additional rings allow more pronounced bone insertion. Male patients had greater bone thickness, which may be related to greater difficulty in opening the sutures. The alveolar process region seems to be a satisfactory site for mini-implants to those patients with reduced bone thickness in the paramedian posterior region. MARPE appliance must be customized for each patient, due to bone thickness and anatomical variations.

MISMARPE protocol: minimally invasive surgical and miniscrew-assisted rapid palatal expansion

OBJECTIVE

The purpose of this article is to present the MISMARPE technique, a new minimally invasive surgical procedure to treat maxillary transverse atresia in adult patients under local anesthesia and on an outpatient basis.

TECHNIQUE DESCRIPTION

The technique consists of miniscrew-assisted rapid palatal expansion (MARPE) associated with a minimally invasive approach using maxillary osteotomies, latency and activation periods until the desired expansion is achieved. The present MISMARPE technique was performed in 25 consecutive cases with a success rate of 96%, yielding good skeletal outcomes with minimal trauma. The expander appliances, with their anchorage types, and a description of the surgical steps of the MISMARPE technique are presented.

CONCLUSION

MISMARPE is a new and effective alternative for less invasive treatment of maxillary transverse deficiency in adults, compared to conventional surgery. Emphasis is placed on the importance of systematic and well-established protocols, for executing the procedures safely and predictably.

Why does maxillary skeletal expansion work with some adults and fail with Others?: A narrative review

Maxillary skeletal expansion is considered a challenging treatment modality in adult ages. Mini-screw-assisted rapid palatal expansion (MARPE) is considered a pioneer in providing a solution for maxillary deficiency in adults away from any surgical interventions. If we consider patient cooperation and motivation, together with operator skills, as constant factors during MARPE, and exclude all hygiene and soft tissue complications that jeopardise the appliance's stability, there is a percentage of expansion failure recorded in different studies with no emphasis on what makes mid-facial diastema appear in some, rather than others. Electronic databases including PubMed, Scopus, Google Scholar, and Web of Science, were searched for literature published in English till 2023. Failure was related in some literature to different criteria, as of yet, no verifiable indicators would allow us to determine success or failure in advance. This review highlighted the most common reasons for failure discussed in different literature: Chronological Age, Mid-palatal suture maturation, Bone density, Sex, Race, Appliance design, and Expansion technique used. This study could be considered an attempt to make candidate selection for non-surgical maxillary skeletal expansion at this old age easier, time-saving, and cost less.

Effects of different tooth movement patterns and aligner thicknesses on maxillary arch expansion with clear aligners: a three-dimensional finite element study

Objectives

The objective of this study was to investigate the biomechanical effects of different tooth movement patterns and aligner thicknesses on teeth and periodontal tissues during maxillary arch expansion with clear aligners, to facilitate more precise and efficient clinical orthodontic treatments.

Methods

Three-dimensional models including teeth, maxilla, periodontal ligament, and aligner were constructed and subjected to finite element analysis. Tooth displacement trends and periodontal ligament stresses were measured for seven tooth displacement patterns (divided into three categories including overall movement of premolars and molars with gradually increasing molar expansion in each step; distributed movement of premolars and molars; and alternating movement between premolars and molars at intervals) and two aligner thicknesses (0.5 mm and 0.75 mm) during maxillary arch expansion with clear aligners.

Results

When expanding the maxillary arch with clear aligners, the effective expansion of the target teeth mainly showed a tilting movement trend. Increasing the amount of molar expansion increased the buccal displacement of the first molar but decreased the buccal displacement of the premolars. The mean buccal displacement of the target teeth was greater in the posterior teeth interval alternating movement group (0.026 mm) than in the premolar/molar distributed movement group (0.016 mm) and the overall movement group (0.015 mm). Increasing aligner thickness resulted in greater buccal displacement of the crowns and increased stress on the periodontal ligaments.

Conclusion

Increasing the amount of molar expansion reduces the efficiency of premolar expansion. Alternating movement of premolars and molars at intervals achieves a higher arch expansion efficiency, but attention should be paid to the anchorage of adjacent teeth. Increasing the thickness of the aligner increases the expansion efficiency but may also increase the burden on the periodontal tissues.

Is significant mandibular advancement possible after the peak of puberty? Dento-osseous palatal expansion and the STM4 technique (Skeletal Therapy Manni Telescopic Herbst 4 miniscrews): A case report

INTRODUCTION

Treatment of skeletal class II growing patients often requires the use of functional appliances, aimed at promoting mandibular advancement. Among these, Herbst appliance is recommended for its effectiveness, efficiency, and reduced need for compliance. Despite its skeletal favourable effects, well-known dental compensations can occur, especially when the appliance is not used close to the pubertal peak: upper incisors retroclination, lower incisors proclination, upper molars distalization and lower molars mesialization could reduce the overjet needed for a proper mandibular advancement. To counteract these unfavourable effects skeletal anchorage could be crucial.

AIM

The aim of this case report is to describe and evaluate the effects of using a skeletally anchored Herbst appliance in an 18-year-old (CVM5) male patient with skeletal Class II malocclusion and a convex profile.

TREATMENT PROTOCOL

The treatment started with a tooth-bone-borne palatal expansion, then the upper arch was bonded with pre-adjusted ceramic brackets. After 2months, a Manni Telescopic Herbst (MTH) supported by 4 miniscrews (two in the maxilla and two in the mandible) was applied. To avoid anchorage loss, TADs were connected with elastic chains to the arches. Nine months later, the Herbst was removed, the lower teeth were bonded and the patient wore class 2 elastics to stabilise the occlusion.

RESULTS AND CONCLUSIONS

After 24months the treatment goal was achieved with a considerable improvement of the profile and a clinically significant mandibular advancement (Pogonion moved forward 7mm). A one-year follow-up lateral X-rays showed a good stability of the result.

Midpalatal suture maturation in 15- to 35-year-olds: morphological assessment in the coronal plane using CBCT-an exploratory study

Rapid maxillary expansion (RME) is used in patients presenting transverse maxillary deficiency. However, RME may be unpredictable after late adolescence if the midpalatal sutural maturation stage (MPMS) is in late stage. Since MPMS evaluation is influenced by the expertise of the operator and image quality, this classification method could be complemented. Therefore, this study aimed to analyze the morphology of the midpalatal suture (MPS) and its surrounding bone in the coronal plane using cone beam computed tomography (CBCT) images of adolescents and young adults and to correlate the findings with their respective MPMS status. CBCT scans of 200 patients aged 15-35 years of both sexes were evaluated. MPS and surrounding bone tissue characteristics in the coronal and axial sections were analyzed, and MPMS was evaluated (A to E). Six categories were identified for the coronal evaluation, analyzing it in 2 standardized locations. Sutural morphology: I, hypodense sutural line limited by 2 hyper-dense para-sutural lines; II, hypodense sutural line; and III, suture not visible. The presence of para-sutural cancellous bone: CB0, compact bone; CB1, dense cancellous tissue; CB2, spaced cancellous bone. Midpalatal bone thickness (MBTh) was also measured. ANOVA-Bonferroni, chi-square, logistic regression and t-tests were used. MPMS increased with age. Sutural morphology I and CB0 bone were the most prevalent. Here we show that sutural morphology, para-sutural bone characteristics, and MPSM were significantly associated. The coronal evaluation of the MPS can complement the information from the MPSM assessment, allowing the identification of patent MPS even in the presence of late MPSM.

Comparison of 3D-printed and laboratory-fabricated Hyrax on stress distribution and displacement of the maxillary complex: a 3D finite element study

OBJECTIVE

To analyze and compare the effects of a traditional laboratory-fabricated Hyrax expander (T-Hyrax) and two different 3D-printed Hyrax expander models relative to tension points, force distribution, and areas of concentration in the craniofacial complex during maxillary expansion using finite element analysis.

MATERIALS AND METHODS

Three maxillary expanders with similar designs, but various alloys were modeled: a T-Hyrax, a fully printed Hyrax (F-Hyrax), and a hybrid printed Hyrax (H-Hyrax). The stress distributions and magnitude of displacements were assessed with a 5 mm expansion in a symmetrical finite element model. The areas of interest included the teeth, alveolar processes, midpalatal suture, nasal complex, circummaxillary sutures (CS), and the expanders themselves.

RESULTS

The highest stress value (29.2 MPa) was found at the midpalatal suture of the F-Hyrax, while the lowest stress (0.90 MPa) was found at the temporozygomatic suture in the T-Hyrax. On average, the F-Hyrax increased stress at the CS by 24.76% compared with the T-Hyrax and H-Hyrax. The largest displacements were found at the upper incisor (U1) and anterior nasal spine (ANS). The findings indicated an average increase of 12.80% displacement at the CS using the F-Hyrax compared to the T-Hyrax.

CONCLUSION

The F-Hyrax exerts more stress and displacement on the maxilla than both the T-Hyrax and H-Hyrax, where the weak link appears to be the solder joint.

Does Miniscrew-Assisted Rapid Palatal Expansion Influence Upper Airway in Adult Patients? A Scoping Review

(1) Objective: This scoping review evaluates the effects of miniscrew-assisted rapid palatal expansion (MARPE) on different regions of the upper airway in adult patients and investigates various methods of measurement. (2) Methods: The search encompassed Pubmed, Cochrane Library, Scopus and Web of Science. This review was conducted following the PRISMA_ScR guidelines, and the inclusion criteria for examined studies were chosen in accordance with the PICOS framework. (3) Results: Seven studies were included in this review, comprising four retrospective studies, one prospective and two case reports. All studies involved the use of Cone Beam Computed Tomography (CBCT) for measurements of the areas of interest. The percentage of increase in the volume of the nasal cavity varied between 31% and 9.9%, depending on the study. Volumetric variations in the nasopharynx were reported as increases between T0 (before expansion) and T1 (immediately after expansion) of 6.4%, 20.7% and 14.1%. All studies considered T0 before expansion and T1 immediately after expansion. Only one study evaluated remote follow-up to assess if the results were maintained after one year. (4) Conclusions: MARPE appears to lead to a statistically significant increase in the upper airway, especially in the nasal cavity and nasopharynx immediately after expansion. However, further prospective and retrospective trails with long-term controls are required to verify the effects of MARPE on the upper airway.

Long-term effects of maxillary skeletal expander treatment on functional breathing

Objective

: To investigate the long-term effects of maxillary skeletal expander (MSE) treatment on functional breathing.

Methods

Objective

measures of breathing, the peak nasal inspiratory flow (PNIF), and peak oral inspiratory flow (POIF), and subjective measures of breathing, the visual analog scale (VAS) and nasal obstruction symptom evaluation (NOSE) survey, were used to investigate the long-term effects of MSE in functional breathing. Seventeen patients, mean age 19.4 ± 3.9 years treated at the UCLA Orthodontics Clinic were assessed on their functional breathing at 3 timepoints: pre-expansion (T0), post-expansion (T1), and post-orthodontic treatment (T2).

Results

: Immediately after expansion (T1), all the objective functional breathing values were significantly increased in comparison to T0 (P < 0.05). The VAS total, VAS right and VAS left were significantly lower at T1 in comparison to T0 (P < 0.05). At 26.8 ± 3.9 months after MSE expansion (T2), PNIF total, PNIF right, PNIF left, and POIF were significantly higher when compared to T0 (P < 0.05). Also, VAS total, VAS right and VAS left were significantly lower at T2 when compared to T0 (P < 0.05). Additionally, there was a positive correlation between PNIF and the magnitude of expansion at anterior nasal spine and zygomaticomaxillary point (ZMA). There was a positive correlation between total VAS and the magnitude of expansion at the ZMA. There were no significant changes for the NOSE subjective breathing measurement at all time comparisons.

Conclusions

: Overall, MSE treatment produces an increased objective and subjective airway improvement that continues to remain stable in the long-term post expansion.

A Retrospective Histological Study on Palatal and Gingival Mucosa Changes during a Rapid Palatal Expansion Procedure

The most common inflammatory reactions in the oral mucosa are found at the gingival level. The treatment of these inflammations requires, first of all, the removal of the causative factor; often, this maneuver is sufficient. The aim of this retrospective study was to evaluate clinical and histopathological changes that occur in terms of gingival and palatal mucosa enlargement during palatal expansion treatment and their evolution during treatment. Twenty-five (n = 25) research participants, aged between thirteen and twenty-six years old, were examined in this retrospective study. At the end of the treatment, fragments of tissue from the affected level were obtained via incisional biopsy and sent to the histopathology laboratory for a specialized examination. The changes identified were specific to mechanical traumatic injuries, thus excluding hyperplasia from other etiologies (infectious, tumoral, or non-mechanical traumatic). The examined fragments showed hyperplasia. The histopathological examination revealed the mechanical character of the lesion, strengthening the causal relationship between the insertion of the expander and the occurrence of hyperplasia of the palatal mucosa. The type of palatal expander influenced the degree of inflammation, with the severity of hyperplasia being more pronounced in the case of mini-implant-anchored rapid palatal expander (MARPE) usage than in the case of tooth-borne rapid palatal expander (RPE) usage. The analysis of the distance between the expander and the palatal mucosa did not provide conclusive results; the incidence and severity of the reaction were variable in patients with the same distance between the expander and the palatal or gingival mucosa.

Predictability of Dental Distalization with Clear Aligners: A Systematic Review

The current review aims to evaluate the scientific evidence relating to the effectiveness of treatment with clear aligners (CAs) in controlling distalization orthodontic tooth movement. "Orthodontics, aligners" and "distalization" were the search terms used on the Scopus, Web of Science and Pubmed databases with the Boolean operator "AND". The results of the last ten years of research were 146 studies; of these, 19 publications were included for this review. The distalization movement is possible with invisible masks alone, but the risk of losing anchorage in the anterior sectors is very probable. The stability of the results and the reduction of unwanted effects can be guaranteed by the use of skeletal anchoring devices and interproximal enamel reduction (IPR), with which compensations are obtained to reduce the initial overjet. Temporary anchorage devices (TADs) can be used to manage posterior anchorage after distalization of maxillary molars with aligners. This hybrid approach has demonstrated the greatest orthodontic success. TADs are useful aids to provide direct and indirect skeletal anchorage. The opposite effect must be considered when planning dental distalization, especially of the molars, in patients with large overjet, and corrective measures or the use of auxiliaries may be necessary to prevent midcourse corrections. This systematic review provides a critical evidence-based assessment of the predictability of dental distalization with CAs, an ever-evolving orthodontic technique.

Evaluation of expansion forces of five pure bone-borne maxillary expander designs anchored with orthodontic mini-implants: An in vitro study

AIM

This in vitro study investigates the limit of expansion forces and torque wrench forces developed by five skeletal bone expander designs (MICRO 2/4 expanders™) for clinical application.

MATERIAL AND METHODS

A total of 30 skeletal expanders were placed in artificial bone blocks and mechanically tested, simulating maxillary expansion. Differences in jackscrew (Dentaurum™ [D], Superscrew™ [S] and Powerscrew™ [P]), number of orthodontic mini-implants (OMIs; two or four) and their placement inclinations (parallel 0° or 10° inclination) form five designs (D4/10°, S4/0°, S4/10°, P4/10° and P2/10°). Expansion forces and torque wrench values were registered, and radiographs were made initially and after 4 mm of expansion. Stress-strain curves were obtained after successive activations and the statistical analysis was performed as appropriate.

RESULTS

Plastic deformations in the OMIs and jackscrew occurred around the activation numbers 11-13, with torque wrench values in the range of 500-700 cN. The maximum expansion forces in expanders with four OMIs varied from 93.0 (D4/10°) to 166.6 N (P4/10°) whereas two OMI expanders (P2/10°) registered forces of 79.4 N. Radiographs revealed during loads bending forces (S4/00°, S4/10°) with jackscrew and OMIs deformation in a convex shape, and shear forces (P4/10°, P2/10°) demonstrated only OMIs deformation in a concave shape, providing 15% more expansive force. The jackscrew D4/10° did not have any deformation, but its wire key did not allow reliable activations from activation number 10 and compared to S4/10° and P4/10°, these expanders provided greater expansion forces (P = 0.000 and P = 0.032, respectively).

CONCLUSION

The different results obtained in stability and expansion forces indicate that if the activations are carried out under extreme conditions, they may have clinical importance with deformations and non-working expansion mechanics. Jackscrew designs play an important role in expansive forces and expander stability. Torque wrench values can be used clinically as a tool to asses the expansion forces and to avoid deformations.

Stress distribution and displacement with four different types of MARPE on craniofacial complex: A three-dimensional finite element analysis

BACKGROUND

Various designs of mini-implants assisted rapid palatal expander (MARPE) appliances can impact treatment effectiveness through their biomechanical effects. The purpose of the study was to study the stress distribution and displacement with four different designs of the MARPE appliance on the craniofacial complex.

METHODS

A 3D finite element model of the craniofacial complex was created from CBCT DICOM data, comprising four distinct groups. Each group consisted of one 4-hole expansion screw positioned between the second premolar and first molar in all models. Group 1 used four single-cortical mini-implants (1.5×8mm) engaging only the palatal cortex. Group 2 employed four mini-implants (1.5×11mm) engaging both the palatal and nasal cortices. Group 3 had monocortical implants on the palatal slopes, while Group 4 was similar to group 3 with implants in the acrylic wings. Comparisons between groups were made for anchorage (groups 1 and 2), mini-implant position (groups 1 and 3) and surface effect (groups 3 and 4). Von Mises stresses and displacements at various skeletal and dental points were evaluated using ANSYS software.

RESULTS

The highest stresses were observed in the maxillary, pterygoid and zygomatic bones, as well as in the mid- palatal suture in all four groups. Downward and forward rotation of the craniofacial complex was noted. Group 2 showed greater skeletal expansion than group 1. Among groups 1 and 3, group 3 showed a better stress distribution. Group 4 showed less dentoalveolar rotation than group 3.

CONCLUSIONS

The MARPE appliances had an impact on the craniofacial complex with stresses on the mid-palatal suture, maxillary bone, pterygoid bones and anterior teeth. Clockwise rotation of the maxilla, zygomatic bones and dentition was noted, while the pterygoid bones and pterygoid suture were displaced backwards. MARPE with bicortical anchorage produces better skeletal expansion. Placing implants on the palatal slopes with acrylic wings results in better skeletal expansion with less clockwise rotation of the dentition.

Influence of miniscrew-assisted rapid palatal expansion (MARPE) on the interdental papilla height of maxillary central incisors

OBJECTIVES

To evaluate the influence of miniscrew-assisted rapid palatal expansion (MARPE) on the interdental papilla height of maxillary central incisors.

MATERIALS AND METHODS

Patients who completed MARPE treatment at the Radboud University Medical Center between 2018 and 2021 were included in this retrospective study. The papilla height between the maxillary central incisors was evaluated on frontal intraoral photographs taken before expansion (T0) and 1.5 years after MARPE treatment (T1) using the Jemt classification. The difference in Jemt score at T0 and T1 was the primary outcome variable. In addition, gender, age, Angle classification, MARPE duration, midpalatal suture maturation stage, maximal central diastema (MCD) immediately after expansion, crown width to length ratio (W/L), pretreatment overlap of maxillary central incisors, and the distance between the approximal contact point of the central incisors and the bone crest (CP-B) were also record.

RESULTS

Twenty-two patients were included (2 men, 20 women, mean age 27.3 ± 8.8 years) and 4 patients (18%) showed a significant reduction in the Jemt score following MARPE (p = 0.04), indicating papilla recession. Interdental papilla recession was significantly associated with the increase of CP-B (p = 0.02), smaller W/L (p < 0.01), overlapping of maxillary central incisors (p < 0.01), and smaller MCD immediately after expansion (p = 0.02).

CONCLUSIONS

One and a half years after MARPE, 18% of patients exhibited mild recession of papilla height of the maxillary central incisors. Overlapping and smaller W/L of maxillary central incisors were prognostic factors for interdental papilla recession.

CLINICAL RELEVANCE

Clinicians have to be aware of and inform the patients about the occurrence of papilla recession following MARPE.

Treatment effects after maxillary expansion using tooth-borne vs tissue-borne miniscrew-assisted rapid palatal expansion appliance

INTRODUCTION

The study investigated the skeletal effects and root resorption in young adults with maxillary transverse deficiency after tissue-borne or tooth-borne mini-implant anchorage maxillary expansion.

METHODS

Ninety-one young adults with maxillary transverse deficiency, aged 16-25 years, were divided into 3 groups according to the treatment method: group A (n = 29) comprising patients treated with tissue-borne miniscrew-assisted rapid palatal expansion (MARPE), the group B (n = 32) comprising patients treated with tooth-borne MARPE, and the control group (n = 30) comprising patients only treated with fixed orthodontic therapies. Pretreatment and posttreatment cone-beam computed tomography images were used to assess the change of maxillary width, nasal width, first molar torque and root volume by paired t test in the 3 groups, respectively. Analysis of variance and Tukey least significant difference analysis were used to detect the changes of all descriptions among the 3 groups P <0.05.

RESULTS

In the 2 experimental groups, we observed significant increases in the width of the maxilla, nasal, and arch width, as well as the molar torque. In addition, the height of the alveolar bone and the root volume decreased significantly. There were no significant differences in the maxilla, nasal, and arch width change between the 2 groups. Group B displayed more increases in buccal tipping, alveolar bone loss, and root volume loss than group A (P <0.05). Compared with groups A and B, the control group showed negligible tooth volume loss, with no expansion effect in both skeletal and dental descriptions.

CONCLUSIONS

Tissue-borne MARPE produced the same expansion efficiency as tooth-borne MARPE. However, tooth-borne MARPE causes more dentoalveolar side effects in buccal tipping, root resorption and alveolar bone loss.

Pattern of microimplant displacement during maxillary skeletal expander treatment: A cone-beam computed tomography study

Objective

To analyze the microimplant (MI) displacement pattern on treatment with a maxillary skeletal expander (MSE) using cone-beam computed tomography (CBCT).

Methods

Thirty-nine participants (12 males and 27 females; mean age, 18.2 ± 4.2 years) were treated successfully with the MSE II appliance. Their pre- and post-expansion CBCT data were superimposed. The pre- and post-expansion anterior and posterior inter-MI angles, neck and apical inter-MI distance, plate angle, palatal bone thickness at the MI positions, and suture opening at the MI positions were measured and compared.

Results

The jackscrew plate was slightly bent in both anterior and posterior areas. There was no significant difference in the extent of suture opening between the anterior and posterior MIs (p > 0.05). The posterior MI to hemiplate line was greater than that anteriorly (p < 0.05). The apical distance between the posterior MIs was greater than that anteriorly (p < 0.05). The palatal thickness at the anterior MIs was significantly greater than that posteriorly (p > 0.01).

Conclusions

In the coronal plane, the angulation between the anterior MIs in relation to the jackscrew plate was greater than that between the posterior MIs owing to the differential palatal bone thickness.

Temporary anchorage devices in orthodontics: a bibliometric analysis of the 50 most-cited articles from 2012 to 2022

OBJECTIVES

To identify and analyze the 50 most cited articles on temporary anchorage devices (TADs) and investigate the achievement and development of scientific research about the topic through a bibliometric analysis.

MATERIALS AND METHODS

On August 22, 2022, a computerized database search was performed to detect papers published in the scientific literature about TADs from 2012 to 2022. Metrics data were identified using the Incites Journal Citation Reports (Clarivate Analytics) data set. The Scopus database was used to obtain information on the authors' affiliations, country of origin, and h-index. Key words were automatically harvested from the selected articles to implement the visualized analysis.

RESULTS

From a total of 1858 papers screened by searching the database, a list of the top 50 most cited articles was created. The total number of citations collected by the 50 most cited articles in TADs was 2380. Among the 50 most cited articles on TADs, 38 were original research papers (76.0%) and 12 were reviews (24.0%). As shown by the key word-network analysis, Orthodontic anchorage procedure was identified as the larger node.

CONCLUSIONS

Findings of this bibliometric study showed an increasing number of citations for papers on TADs, accompanied by a simultaneous rise in scientific interest in this topic in the past decade. The present work identifies the most influential articles, emphasizing the journals, the authors, and the topics addressed.

What is the impact of miniscrew-assisted rapid palatal expansion on the midfacial soft tissues? A prospective three-dimensional stereophotogrammetry study

OBJECTIVES

To evaluate the midfacial soft tissue changes of the face in patients treated with miniscrew-assisted rapid palatal expansion (MARPE).

MATERIALS AND METHODS

3D facial images and intra-oral scans (IOS) were obtained before expansion (T0), immediately after completion of expansion (T1), and 1 year after expansion (T2). The 3D images were superimposed and two 3D distance maps were generated to measure the midfacial soft tissue changes: immediate effects between timepoints T0 and T1 and overall effects between T0 and T2. Changes of the alar width were also measured and dental expansion was measured as the interpremolar width (IPW) on IOS.

RESULTS

Twenty-nine patients (22 women, 7 men, mean age 25.9 years) were enrolled. The soft tissue in the regions of the nose, left of philtrum, right of philtrum, and upper lip tubercle demonstrated a statistically significant anterior movement of 0.30 mm, 0.93 mm, 0.74 mm, and 0.81 mm, respectively (p < 0.01) immediately after expansion (T0-T1). These changes persisted as an overall effect (T0-T2). The alar width initially increased by 1.59 mm, and then decreased by 0.08 mm after 1 year, but this effect was not significant. The IPW increased by 4.58 mm and remained stable 1 year later. There was no significant correlation between the increase in IPW and alar width (r = 0.35, p = 0.06).

CONCLUSIONS

Our findings indicate that MARPE results in significant but small changes of the soft tissue in the peri-oral and nasal regions. However, the clinical importance of these findings is limited.

CLINICAL RELEVANCE

MARPE is an effective treatment modality to expand the maxilla, incurring only minimal and clinically insignificant changes to the midfacial soft tissues.

The effects of miniscrew-assisted rapid palatal expansion on the upper airway of adults with midpalatal suture in the last two degrees of ossification

BACKGROUND

Transverse deficiencies of the maxillary basal bone have been treated in adult patients using miniscrew-assisted rapid palatal expansion (MARPE) therapy. However, the midpalatal suture's degree of ossification may affect the upper airway dimensions. This study compared the volumetric changes of the total upper, retropalatal, retroglossal airways, and the minimal transverse airway constriction after MARPE therapy in patients with midpalatal suture in the last stages of ossification.

METHODS

This controlled clinical trial included a total of 20 adult patients (mean age 24.5 ± 6.2 years) with maxillary atresia treated with MARPE. Preoperative (T0) cone-beam computed tomography scans were used to determine the degree of midpalatal suture ossification. Two groups were formed considering the last two stages of sutural ossification "D" or "E" (n = 10 per group). After 120 days of the therapy (T1), cone-beam computed tomography assessments were performed to compare the pre and post-treatment outcomes. The total upper, retropalatal, and retroglossal airways and the minimal transverse airway constriction were evaluated. The three-dimensional reconstruction was performed with OsiriX MD software. The comparisons were carried out using mixed models for repeated measures at fixed time points (α = 0.05).

RESULTS

Groups D and E showed no significant difference for any of the analyzed parameters (P > 0.05). Both groups showed a statistically significant increase for all airway segments after the treatment with MARPE (P < 0.05). The total upper airway increased (11.6% and 16.1%) for groups D and E, respectively (P = 0.3356).

CONCLUSIONS

MARPE therapy resulted in dimensional gains of the upper airway for adult patients, irrespective of the intermaxillary sutural degree of ossification.

Midpalatal Suture Maturation Stage in 10- to 25-Year-Olds Using Cone-Beam Computed Tomography-A Cross-Sectional Study

In this study, we aimed to evaluate the frequency of midpalatal maturational stages in a Chilean urban sample of adolescents, post-adolescents and young adults, associated with chronological age and sex, by assessing CBCT scan images. Tomographic images in axial sections of the midpalatal sutures from 116 adolescents and young adults (61 females and 55 males, 10-25 years old) were classified according to their morphologic characteristics in five maturational stages (A, B, C, D and E), as proposed by Angelieri et al. The sample was divided into three groups: adolescents, post-adolescents and young adults. Three previously calibrated examiners (radiologist, orthodontist and general dentist) analyzed and classified the images. Stages A, B and C were considered to be an open midpalatal suture, and D and E were considered to be a partially or totally closed midpalatal suture. The most frequent stage of maturation was D (37.9%), followed by C (24%) and E (19.6%). The possibility of finding closed midpalatal sutures in individuals of 10 to 15 years was 58.4%, and in subjects aged 16 to 20 and 21 to 25 years, it was 51.7% and 61.7%, respectively. In males, Stages D and E were present in 45.4%; for females, this prevalence was 68.8%. Individual assessment of the midpalatal suture in each patient is of crucial importance before making the clinical decision of which is the best maxillary expansion method. Due to the extensive calibration and training required, it is advisable to always request a report from a radiologist. Individual evaluation with 3D imaging is recommended because of the great variability observed in the ossification of midpalatal sutures in adolescents, post-adolescents and young adults.

Three-dimensional dentoskeletal changes following minimally invasive surgically assisted rapid palatal expansion: a prospective study

Dentoskeletal changes in minimally invasive surgically assisted rapid palatal expansion (SARPE) were evaluated using cone beam computed tomography (CBCT). This was a prospective study of 30 patients who underwent minimally invasive SARPE performed under local anaesthesia plus sedation by the same surgeon, in an ambulatory setting. Pre- and postoperative CBCT images were obtained for each patient. A statistically significant increase in the linear transverse dimensions of the maxilla occurred systematically. In the canine region, a mean increase of 5.84 mm occurred at the apex level and 7.82 mm at the crown level. These dimensions were 4.83 mm and 7.68 mm, respectively, in the molar region. The cross-sectional area of the maxilla increased by a mean 12.9 mm² at the palate level and 23.3 mm² at the crown level. Dental inclination to the buccal aspect was detected (mean 6.1° at the canines and 8.4° at the first molars). The alveolar process tipped buccally 10° at the molar level. Nasal width increased a mean of 3.0 mm at the canine level. Through a three-dimensional analysis, this study found that minimally invasive SARPE was effective in the correction of transverse maxillary discrepancies> 5 mm in non-growing patients. Although dental inclination to the buccal aspect occurred, significant expansion of the maxilla at the skeletal and dentoalveolar levels was confirmed.

Evaluation of palate-related factors of the effectiveness of microimplant-assisted rapid palatal expansion in late adolescents and adults

INTRODUCTION

This study investigated the factors of the effectiveness of microimplant-assisted rapid palatal expansion (MARPE) in late adolescents and adults, such as age, midpalatal suture maturation (MPSM) stage, palate length (PL), palatal index (PI), and midpalatal bone thickness (MBT), and at each microimplant position, the palate bone thickness (PBT), the nasal cortical bone thickness (CoTN), the cancellous bone thickness (CaT), and the palate cortical bone thickness (CoTP) were evaluated.

METHODS

Cone-beam computed tomography (CBCT) images of 50 patients (mean, 23.30 ± 7.03 years; range, 16-51 years) treated with MARPE were evaluated. Maxillary expansion ratio (MER) was used to assess the MARPE effectiveness and grouped patients into low and high MER groups according to the mean of MER. MER was the ratio of maxillary expansion width to MARPE screw expansion measured in CBCT images. The t-test was used to analyze the differences between the low and high MER groups. The Pearson correlation test was performed to investigate the correlation between MER and age, MPSM stage, PL, PI, MBT, PBT, CoTN, CaT, and CoTP.

RESULTS

Age, MPSM stage, and MBT in regions 18 mm and 21 mm behind the incisor foramen correlated negatively with MER ([Formula: see text], - 0.390, - 0.386, and - 0.335, respectively, all [Formula: see text]), whereas PBT and CoTN of anterior microimplant positions correlated positively with MER ([Formula: see text] and 0.418, respectively, all [Formula: see text]). No correlation was observed between other variables and MER.

CONCLUSIONS

MARPE effectiveness decreased as age and midpalatal suture maturation stage increased, respectively. Thinner midpalatal suture bone in regions 18 mm and 21 mm behind the incisor foramen, thicker palate bone, and nasal cortical bone of anterior microimplant positions were related to more effective MARPE.

CLINICAL RELEVANCE

In patients with older chronological age and later MPSM stages, MARPE effectiveness might be unsatisfactory. Clinicians should carefully evaluate the palate bone thickness before MARPE treatment.

Analysis of factors associated with the success of microimplant-assisted rapid palatal expansion

INTRODUCTION

Success-related factors of microimplant-assisted rapid palatal expansion (MARPE) were evaluated, including age, palatal depth, suture, and parassutural bone thickness, suture density and maturation, and the relation to corticopuncture (CP) technique, as well as skeletal and dental effects.

METHODS

Sixty-six cone-beam computed tomography scans were analyzed before and after rapid maxillary expansion procedures in 33 patients aged 18-52 years for both sexes. The scans were generated in digital imaging and communications in medicine file format and analyzed in the multiplanar reconstruction of the regions of interest. Palatal depth, suture thickness, density and maturation, age, and CP were assessed. To evaluate dental and skeletal effects, the sample was divided into 4 groups: successful MARPE (SM), SM + CP technique (SMCP), failure MARPE (FM), and FM + CP (FMCP).

RESULTS

Successful groups presented more skeletal expansion and dental tipping than failure groups (P <0.05). The mean age of the FMCP group was significantly higher than the SM groups; suture and parassutural thickness significantly related to the success, and patients who received CP showed a success rate of 81.2% compared with 33.3% in the no CP group (P <0.05). Suture density and palatal depth did not show a difference between the success and failure groups. Suture maturation was higher in SMCP and FM groups (P <0.05).

CONCLUSIONS

Older age, thin palatal bone, and higher stage of maturation can influence the success of MARPE. CP technique in these patients appears to have a positive impact, increasing the chance of treatment success.

Three-Dimensional Evaluation Effects of Microimplant-Assisted Rapid Palatal Expansion on the Upper Airway Volume: A Systematic Review and Meta-Analysis

Microimplant-assisted rapid palatal expansion is increasingly used clinically; however, the effect on the upper airway volume in patients with maxillary transverse deficiency has not been thoroughly evaluated yet. The following electronic databases were searched up to August 2022: Medline via Ovid, Scopus, Embase, Web of Science, Cochrane Library, Google Scholar, and ProQuest. The reference lists of related articles were also reviewed by manual search. The Revised Cochrane Risk of Bias Tool for randomized trials (ROB2) and the Risk of Bias in non-randomized Studies of Interventions (ROBINS-I) tool were used to evaluate the risks of bias of the included studies. The mean differences (MD) and 95% confidence intervals (CI) of changes in nasal cavity and upper airway volume were analyzed using a random-effects model, and subgroup and sensitivity analyses were also performed. Two reviewers independently completed the process of screening studies, extracting data, and assessing the quality of studies. In total, twenty-one studies met the inclusion criteria. After assessing the full texts, only thirteen studies were included, with nine studies selected for quantitative synthesis. Oropharynx volume increased significantly after immediate expansion (WMD: 3156.84; 95% CI: 83.63, 6230.06); however, there was no significant change in nasal volume (WMD: 2527.23; 95% CI: -92.53, 5147.00) and nasopharynx volume (WMD: 1138.29; 95% CI: -52.04, 2328.61). After retention a period, significant increases were found in nasal volume (WMD: 3646.27; 95% CI: 1082.77, 6209.77) and nasopharynx volume (WMD: 1021.10; 95% CI: 597.11, 1445.08). However, there was no significant change after retention in oropharynx volume (WMD: 789.26; 95% CI: -171.25, 1749.76), palatopharynx volume (WMD: 795.13; 95% CI: -583.97, 2174.22), glossopharynx volume (WMD: 184.50; 95% CI: -1745.97, 2114.96), and hypopharynx volume (WMD: 39.85; 95% CI: -809.77, 889.46). MARPE appears to be linked with long-term increases in nasal and nasopharyngeal volume. However, high-quality clinical trials are required to further verify the effects of MARPE treatment on the upper airway.

Effect of the computer-aided static navigation technique on the accuracy of bicortical mini-implants placement site for maxillary skeletal expansion appliances: an in vitro study

The objective of the present study was to evaluate and compare the effect of the computer-aided static navigation technique on the accuracy of the maxillary skeletal expansion (MSE) appliances.

MATERIAL AND METHODS

Forty orthodontic self-drilling mini-implants were placed in ten anatomically based standardized polyurethane models of a completely edentulous upper maxilla, manufactured using a 3D impression procedure. The four orthodontic self-drilling mini-implants for anchoring the MSE appliance were digitally planned on 3D planning software, based on preoperative cone-beam computed tomography (CBCT) scan and a 3D extraoral surface scan. Afterwards, the surgical templates were virtually planned and manufactured using stereolithography. Subsequently, the orthodontic self-drilling mini-implants were placed an postoperative CBCT scans were performed. Finally, coronal entry-point, apical end-point and angular deviations were calculated using a t-test for independent samples or a non-parametric Signed Rank test.

RESULTS

Statistically significant differences were not shown at coronal entry-point (p = 0.13), apical end-point (p = 0.41) and angular deviations (p = 0.27) between the planned and performed orthodontic self-drilling mini-implants.

CONCLUSIONS

Computer-aided static navigation technique enables accurate orthodontic mini-implant placement for the MSE appliances.

Maxillary transverse deficiency, with closed intermaxillary suture, does bone-anchored appliance during SARPE cause predictable, and stable maxillary expansion compared to the tooth-borne appliance during SARPE - Systematic review

INTRODUCTION

Managing maxillary transverse deficiency (MTD) with closed intermaxillary suture is a challenge in orthodontic treatment plans; over the years, clinicians have developed many approaches to treat this significant dentofacial deformity. Therefore, it is crucial to understand the underlying causes of MTD and to establish an effective treatment method for restoring the ideal aesthetics and functions for patients. A current and effective SARPE technique for expanding the maxillary arch involves performing 2-piece Le Fort I osteotomy to surgically apply horizontal force to the maxilla along the midpalatal suture in conjunction with either a tooth-borne or bone-borne appliance.

MATERIAL AND METHODS

A systemic review was conducted in order to investigate the differences between the two treatment methods for MTD with matured and closed intermaxillary suture: bone-anchored and tooth-borne appliance during SARPE (surgically-assisted rapid palatal expansion). The review was conducted in the English language through PubMed and Google Scholar electronic databases. The protocol is being reported in accordance with the PRISMA Statement.

RESULTS

This research, however, is subject to several limitations, including minimal randomization, limited sample size, indefinite measurement methods, and a short follow-up period. Each method of maxillary transverse deficiency therapy has been proven to be effective in expanding the maxillary arch.

CONCLUSION

From the analysis of the articles, it was concluded that bone-anchored appliances have a more predictable and stable expansion compared to the tooth-borne appliance during SARPE. Nevertheless, further studies are needed to confirm its long-term effectiveness.

Midpalatal Suture Maturation Method for the Assessment of Maturation before Maxillary Expansion: A Systematic Review

Assessment of midpalatal suture maturation is crucial before deciding which type of maxillary expansion technique will be performed to treat transverse discrepancies. In 2013, Angelieri et al. proposed a new method to evaluate midpalatal maturation using cone-beam computed tomography. The aim of this study was to systematically identify, evaluate, and provide a synthesis of the existing literature about this new method and to rigorously assess the methodological quality of these articles. A bibliographic search was carried out using PubMed, Cochrane Library, SciELO, LILACS, Web of Science, and Scopus using the terms midpalatal suture, cranial sutures, palate, maturation, interdigitation, ossification, maxillary expansion, evaluation, assessment, and assess. Quality assessment was performed using the Observational Cohort and Cross-Sectional Studies tool developed by the National Heart, Lung, and Blood Institute. Hence, 56 articles were obtained, of which only 10 met the selection criteria. We could not include any of the data into an analysis because of the large variation of the data collected and high methodological heterogeneity found among studies. Of all the studies included, 10% had poor quality, 70% fair, and 20% good quality, respectively. Even though age and sex play a role in midpalatal suture obliteration, there is a poor correlation between these variables. Thus, every patient should be assessed individually before choosing the best protocol for maxillary expansion. The midpalatal suture maturation method has the potential to be used for diagnostic purposes, but clinicians should be cautious of routinely using it because an extensive training and calibration program should be performed prior.

Efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults with the Dutch Maxillary Expansion Device: a prospective clinical cohort study

OBJECTIVES

To provide a higher degree of evidence on the efficacy of Miniscrew-Assisted Rapid Palatal Expansion (MARPE) in late adolescents and adults, thereby applying the Dutch Maxillary Expansion Device (D-MED).

MATERIALS AND METHODS

D-MED was developed as an individualized, 3D-designed, and fabricated MARPE appliance supported by 4 palatal miniscrews. Patients from the age of 16 onwards with transverse maxillary deficiency were enrolled consecutively. Pre-expansion and immediate post-expansion CBCTs and intra-oral scans were acquired and measurements of skeletal, alveolar, and dental expansion as well as dental and periodontal side-effects were performed.

RESULTS

Thirty-four patients were enrolled (8 men, 26 women) with mean age 27.0 ± 9.4 years. A success rate of 94.1% was achieved (32/34 patients). The mean expansion duration, or mean observation time, was 31.7 ± 8.0 days. The mean expansion at the maxillary first molars (M1) and first premolars (P1) was 6.56 ± 1.70 mm and 4.19 ± 1.29 mm, respectively. The expansion was 60.4 ± 20.1% skeletal, 8.1 ± 27.6% alveolar, and 31.6 ± 20.1% dental at M1 and 92.2 ± 14.5% skeletal, 0.0 ± 18.6% alveolar, and 7.8 ± 17.7% dental at P1, which was both statistically (p < 0.001) and clinically significant. Buccal dental tipping (3.88 ± 3.92° M1; 2.29 ± 3.89° P1), clinical crown height increase (0.12 ± 0.31 mm M1; 0.04 ± 0.22 mm P1), and buccal bone thinning (- 0.31 ± 0.49 mm M1; - 0.01 ± 0.45 mm P1) were observed, while root resorption could not be evaluated.

CONCLUSIONS

MARPE by application of D-MED manifested its efficacy in a prospective clinical setting, delivering a high amount of skeletal expansion with limited side-effects in late adolescents and adults.

CLINICAL RELEVANCE

Higher quality evidence is supportive of MARPE as a safe and successful non-surgical treatment option for transverse maxillary deficiency.

A reproducible and repeatable digital method for quantifying nasal and sinus airway changes following suture palatine expansion

Purpose

The airway complex is modified by palatine expansion. Computer tomography has been used in the past to determine the change in volume, but there was a lack of a specific, reproducible method for this purpose. The present study sought to determine the accuracy, reproducibility, and repeatability of an innovative digital measurement technique for analyzing the volume of maxillary and nasal sinus airways following suture palatine expansion performed with the Hyrax disyuntor appliance.

Methods

Patients underwent preoperative and postoperative cone-beam computed tomography (CBCT) scans. The datasets were subsequently uploaded into a digital treatment planning software to record the volume of the right and left maxillary sinus, as well as the nasal and maxillary sinus airway complex. The Gage Repeatability & Reproducibility statistical analysis methodology was used to evaluate the repeatability and reproducibility of this measurement technique when measuring the volume of maxillary and nasal sinus airways following suture palatine expansion with the Hyrax disyuntor appliance. Additionally, comparative analysis between preoperative and postoperative measures was performed using Student’s t-test for statistical analysis.

Results

In 5 patients, paired t-tests found statistically significant differences before and after treatment in the volumes of the left maxillary sinus (p = 0.002), right maxillary sinus (p = 0.001), and nasal and maxillary sinus airway complex (p = 0.005) after suture palatine expansion with the Hyrax disyuntor appliance.

Conclusion

The proposed digital technique is an accurate, repeatable, and reproducible measurement technique for analyzing the volume of maxillary and nasal sinus airways following suture palatine expansion using the Hyrax disyuntor.

Skeletal, Dentoalveolar and Dental Changes after "Mini-Screw Assisted Rapid Palatal Expansion" Evaluated with Cone Beam Computed Tomography

The purpose of this study was to evaluate skeletal, dentoalveolar and dental changes after Mini-screw Assisted Rapid Palatal Expansion (MARPE) using tooth bone-borne expanders in adolescent patients after analyzing different craniofacial references by Cone beam computed tomography (CBCT) and digital model analysis. This prospective, non-controlled intervention study was conducted on fifteen subjects (mean age 17 ± 4 years) with transversal maxillary deficiency. Pre (T1) and post-expansion (T2) CBCTs and casts were taken to evaluate changes at the premolars and first molar areas. To compare means between two times, paired samples t- or Wilcoxon test were used following criteria. Significant skeletal changes were found after treatment for Nasal width and Maxillary width with means of 2.1 (1.1) mm and 2.5 (1.6) mm (p < 0.00005). Midpalatal suture showed a tendency of parallel suture opening in the axial and coronal view. For dentoalveolar changes, a significant but small buccal bone thickness (BBT) reduction was observed in all teeth with a mean reduction of 0.3 mm for the right and left sides, especially for the distobuccal root of the first molar on the left side (DBBTL1M) [IC95%: (−0.6; −0.2); p = 0.001] with 0.4 (0.4) mm. However, a significant augmentation was observed for the palatal bone thickness (PBT) on the left side. The buccal alveolar crest (BACL) and dental inclination (DI) showed no significant changes after treatment in all the evaluated teeth. MARPE using tooth bone-borne appliances can achieve successful skeletal transverse maxillary expansion in adolescent patients, observing small dentoalveolar changes as buccal bone thickness (BBT) reduction, which was not clinically detectable. Most maxillary expansions derived from skeletal expansion, keeping the alveolar bone almost intact with minor buccal dental tipping.

Management of Class III Malocclusion and Maxillary Transverse Deficiency with Microimplant-Assisted Rapid Palatal Expansion (MARPE): A Case Report

Microimplant-assisted rapid palatal expansion (MARPE) has been demonstrated successfully in maxillary expansion in late adolescence and adulthood. The maxillary advancement accompanied by expansion is frequently anticipated, which is beneficial for the treatment of class III malocclusion. Airway volume increase can also be noted in some cases from the measurement of cone beam computerized tomography (CBCT) after expansion. The objective of this case report is to demonstrate the feasibility of applying MARPE on late adolescence patients with maxillary transverse deficiency and to present the changes in transverse and anteroposterior dimensions as well as the volume increase in velopharyngeal airway after MARPE. A 15-year-old female presented class III skeletal pattern. She had maxillary transverse deficiency with moderate crowding and posterior/anterior crossbites. Maxillary Skeletal Expander (MSE; Biomaterials Korea Inc.) type-2 was used as a MARPE device in this case. After four weeks of maxillary expansion, a significant amount of expansion was achieved and the anterior crossbite was spontaneously corrected. Fixed appliance treatment was commenced four weeks after MARPE with 0.022-slot preadjusted brackets (MBT prescription). Temporary anchorage devices (TADs) were placed over the mandibular buccal shelves for posterior teeth distalization and crowding relief. After 25 months of treatment, the facial profile was improved with maxillary advancement (SNA: 83° to 83.5°) and mandibular backward rotation (SNB: 83° to 82°; SN-MP: 34.5° to 35°). In this case, MARPE not only engenders significant transverse correction but also aids in anteroposterior change. The treatment effects of maxillary advancement and mandibular backward rotation can lead to a more esthetic profile in skeletal class III cases.

Rapid Maxillary Expansion on the Adolescent Patient: Systematic Review and Case Report

Aim: In the literature, many studies and articles are investigating new devices and approaches to achieve rapid palate expansion through the opening of the palatal suture, and evaluating the skeletal, dental, and soft tissue effects. The purpose of this review was to assess how palatal expansion is performed in adolescent patients with permanent dentition. Furthermore, it was reported as an example of successful orthodontic treatment of an 11-year-old female patient affected by maxillary skeletal transverse deficiency, in permanent dentition. Methods: A search of the literature was conducted on PubMed, Cochrane, Scopus, Embase, and Web of Science databases. Inclusion criteria were the year of publication between 2017 and 2022, patients aged 10 to 16 years in permanent dentition, with transversal discrepancy, treated with tooth-borne, bone-borne, hybrid palatal expanders. Results: A total of 619 articles were identified by the electronic search, and finally, a total of 16 papers were included in the qualitative analysis. Conclusions: From this study, it was assessed that MARPE is more predictable, and it determines a more significant expansion of the suture than the Hyrax expander, with fewer side effects.

Three-dimensional evaluation of skeletal and dental effects of treatment with maxillary skeletal expansion

INTRODUCTION

The objective was to determine the skeletal and dental changes with microimplant assisted rapid palatal expansion (MARPE) appliances in growing (GR) and nongrowing (NG) patients using cone-beam computed tomography and 3-dimensional imaging analysis.

METHODS

The sample consisted of 25 patients with transverse maxillary discrepancy treated with a maxillary skeletal expander, a type of MARPE appliance. Cone-beam computed tomography scans were taken before and after maxillary expansion; the interval was 6.0 ± 4.3 months. The sample was divided into GR and NG groups using cervical vertebral and midpalatal suture maturation. Linear and angular 3-dimensional dentoskeletal changes were assessed after cranial base superimposition. Groups were compared with independent-samples t test (P <0.05).

RESULTS

Both groups displayed marked transverse changes with a similar ratio of skeletal to dental transverse changes and parallel sutural opening from the posterior nasal spine-anterior nasal spine; a similar amount of expansion occurred in the anterior and the posterior regions of the maxilla. The maxilla expanded skeletally without rotational displacements in both groups. The small downward-forward displacements were similar in both groups, except that the GR group had a significantly greater vertical displacement of the canines (GR, 1.7 ±1.0 mm; NG, 0.6 ± 0.8 mm; P = 0.02) and anterior nasal spine (GR, 1.1 ± 0.6 mm; NG, 0.5 ± 0.5 mm; P = 0.004).

CONCLUSIONS

Treatment of patients with MARPE appliance is effective in GR and NG patients. Although greater skeletal and dental changes were observed in GR patients, a similar ratio of skeletal to dental transverse changes was observed in both groups.

Changes in the nasal and pharyngeal airway volume with miniscrew-assisted rapid palatal expansion appliances

Objectives:

The purpose of this study was to assess the volumetric changes in the nasal and pharyngeal airway volume in patients with maxillary transverse deficiency treated with miniscrew-assisted rapid palatal expansion (MARPE) appliances.

Material and Methods:

The pre- and post-treatment cone-beam computed tomography scans of 20 subjects who underwent treatment with the MARPE appliance as part of their orthodontic treatment were included in the study. Pre- and post-expansion airway volume measurements of the nasal cavity, nasopharynx, and oropharynx were measured. Linear measurements of the skeletal structures surrounding the nasal cavity were taken to assess the pattern of airway expansion. Paired t-tests were used to evaluate nasal and pharyngeal airway volume changes with expansion. Pearson correlation test was utilized to assess the relationship between nasal and pharyngeal volume changes.

Results:

A total of 17 out of 20 samples had a successful split of the mid-palatal sutures. A significant increase in nasal airway volume (12.0%) was found post-expansion. In addition, a significant increase in linear measurements of the nasal cavity base width in the frontal plane (7.1%) and both the anterior and posterior widths in the transverse dimension (9.4% and 3.4%, respectively) were found. Significant positive correlations were found between airway volumes and increase in width of the maxillary expansion appliance.

Conclusion:

The effects of maxillary expansion with a MARPE appliance include an increase in nasal cavity volume, but not the nasopharyngeal and the oropharyngeal airway volume. The nasal cavity expands in a triangular pattern in both the frontal and transverse dimensions following orthopedic expansion with the MARPE appliance. Increase in airway volume is a result of the increase in width of the maxillary expansion appliance.

Effectiveness of miniscrew assisted rapid palatal expansion using cone beam computed tomography: A systematic review and meta-analysis

Objective

This study aims to examine the effectiveness of miniscrew assisted rapid palatal expansion (MARPE) treatment in late adolescents and adult patients using cone-beam computed tomography (CBCT).

Methods

Literature search was conducted in five electronic databases (PubMed, Embase, Scopus, Web of Science, and Cochrane Library) based on the PICOS keyword design focusing on MARPE. Out of the 18 CBCT screened outcomes, only nine parameters were sufficient for the quantitative meta-analysis. The parameters were classified into three main groups 1) skeletal changes, 2) alveolar change, and 3) dental changes. Heterogeneity test, estimation of pooled means, publication bias, sensitivity analysis and risk of bias assessment were also performed.

Results

Upon database searching, only 14 full-text articles were qualified from the 364 obtained results. Heterogeneity test indicated the use of the random-effects model. The pooled mean estimate were as follows 1) Skeletal expansion zygomatic width, 2.39 mm; nasal width, 2.68 mm; jugular width, 3.12 mm; and midpalatal suture at the posterior nasal spine and anterior nasal spine, 3.34 mm and 4.56 mm, respectively; 2) Alveolar molar width expansion, 4.80 mm; and 3) Dental expansion inter-canine width, 3.96 mm; inter-premolar width, 4.99 mm and inter-molar width, 5.99 mm. The percentage of expansion demonstrated a skeletal expansion (PNS) of 55.76%, alveolar molar width expansion of 24.37% and dental expansion of 19.87%.

Conclusions

In the coronal view, the skeletal and dental expansion created by MARPE was of the pyramidal pattern. MARPE could successfully expand the constricted maxilla in late adolescents and adult patients.

Miniscrew-Assisted Rapid Palatal Expansion (MARPE): An Umbrella Review

In postpubertal patients, maxillary transverse discrepancy is a common condition often requiring surgical approaches. To overcome the excess morbidity and discomfort, maxillary expansion through miniscrew-assisted rapid palatal expansion (MARPE) was proposed and studied in the last few years. This umbrella review aims to critically appraise the quality of evidence and the main clinical outcomes of available systematic reviews (SRs) on MARPE. An extensive search was carried out in five electronic databases (PubMed-Medline, Cochrane Database of SRs, Scielo, Web of Science, and LILACS) until December 2021. The methodological quality was appraised using the A Measurement Tool to Assess SRs criteria 2 (AMSTAR2). The primary outcome was the methodological quality of SRs. Overall, four SRs were included and analyzed, one of high methodological quality, one of low and two of critically low. Despite the verified methodological constraints, MARPE seems to present significant clinical changes when compared to conventional RPE, SARPE or controls and less adverse clinical outcomes. The quality of evidence produced by the available SRs was not favorable. Future high standard SRs and well-designed clinical trials are warranted to better clarify the clinical protocols and outcomes success of MARPE.

Procedure using CAD/CAM-manufactured insertion guides for purely mini-implant-borne rapid maxillary expanders

With traditional rapid palatal expansion (RPE), orthopaedic forces are transmitted to the skeletal structures via the anchor teeth potentially leading to several unwanted dental side effects. To prevent these issues, tooth–bone-borne or purely bone-borne expanders were introduced using mini-implants in the palate. In this paper, the digitally planned Quadexpander is described which permits palatal expansion with only skeletal anchorage. The use of virtual insertion planning allows for insertion in areas of ideal bone, while avoiding roots and vital structures as well as the possibility of insertion into sites which would otherwise not be considered usable. A second advantage of digital planning is that mini-implants and the expander can be inserted in just one appointment.

Mini-implant assisted rapid palatal expansion (MARPE) effects on adult obstructive sleep apnea (OSA) and quality of life: a multi-center prospective controlled trial

Introduction

Transverse maxillary deficiency is a high prevalent growth disorder within the adult population that may lead to serious health issues, such as detrimental malocclusions and higher risk of developing obstructive sleep apnea (OSA). Mini-implant assisted rapid palatal expansion (MARPE), as it expands the mid-face and augment the nasal and oral cavities dimensions, may reduce the airflow resistance and thus play an important role on OSA therapy in some patients. The main objective of the present trial is to assess MARPE effects on the sleep and quality of life of non-obese adult OSA patients with transverse maxillary deficiency.

Methods

A total of 32 participants were divided into intervention and control groups. They underwent physical evaluation, Epworth Sleepiness Scale (EES) and Quebec Sleep Questionnaire (QSQ), cone-beam computed tomography (CBCT) and home sleep testing (HST) for OSA before MARPE (T1) and 6 months after the intervention (T2).

Results

Questionnaires EES (daytime sleepiness) and QSQ (OSA-related quality of life) presented significant statistical differences between the groups. We also found clinical and statistical (p < 0.01) differences between the groups regarding the apnea/hypopnea index (AHI), as well as others HST parameters (mean oxygen saturation and snoring duration).

Conclusion

In our sample, MARPE (without any auxiliary osteotomy) showed a good success rate (85%) and promoted important occlusal and respiratory benefits. We observed important daytime sleepiness and OSA-related quality of life improvement, as well as the AHI (65.3%), oxygen saturation and snoring duration.