Effects of nystatin, fluconazole and propolis on poly(methyl methacrylate) resin surface

Effect of denture liners surface modification with Equisetum giganteum and Punica granatum on Candida albicans biofilm inhibition

Aim: This study investigated the effect of denture liners surface modification with Equisetum giganteum (EG) and Punica granatum (PG) on Candida albicans biofilm inhibition supposing its usage as a sustained-release therapeutical delivery system for Candida-associated denture stomatitis. Materials & methods: C. albicans biofilm (SC5314 or ATCC 90028) was formed on soft liners superficially modified by a primer mixed to drugs at minimum inhibitory concentrations (0.100 g for EG and PG or 0.016 g for nystatin per ml of primer). After 24 h, 7 or 14 days, antibiofilm activity was evaluated by colony-forming unit counts. Results: Not all groups were equi-efficient to nystatin after 24 h and 7 days. After 14 days, EG and PG efficacies were not different from nystatin (almost 100% inhibition). Conclusion: The proposed protocol presents a promising option to allopathic drugs for Candida-associated denture stomatitis treatment.

Fungicidal and inhibitory efficacy of cinnamon and lemongrass essential oils on Candida albicans biofilm established on acrylic resin: An in vitro study

STATEMENT OF PROBLEM

It is unclear whether cinnamon and lemongrass essential oils can effectively reduce the Candida-biofilm frequently formed on dental devices made from heat-polymerized polymethyl methacrylate (PMMA) resin that contributes to the development of mild oropharyngeal as well as life-threatening candidiasis in patients wearing the devices.

PURPOSE

The purpose of this in vitro study was to determine the efficacy of cinnamon and lemongrass essential oils in eradicating Candida albicans biofilm on heat-polymerized PMMA specimens and to determine whether they retard the formation of fungal biofilm.

MATERIAL AND METHODS

The antifungal effect of cinnamon and lemongrass essential oils was determined by using agar disk diffusion and broth microdilution methods to obtain minimum inhibitory concentrations. The mature C albicans biofilm (48 hours) was pre-established on PMMA specimens before being individually treated with various concentrations (½, 1, 2, 4, 8, 16 times minimum inhibitory concentration) of each tested oil for different exposure times (1, 2, 4, 8, and 24 hours). In another experiment, fungal biofilm was established on the PMMA specimens that were primed individually with various concentrations of the tested oils for different times. The 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT)-reduction assay was used to quantitate biofilm viability in both experiments. Statistical analysis was performed by using the 1-sample Kolmogorov-Smirnov test and 2-way ANOVA followed by the Tukey multiple comparison test (α=.05).

RESULTS

Minimum inhibitory concentration values of cinnamon and lemongrass essential oils against planktonic C albicans were 0.1 μL/mL (0.01% v/v) and 0.4 μL/mL (0.04% v/v). At 8 times the minimum inhibitory concentration, cinnamon oil (0.8 μL/mL or 0.08% v/v) and lemongrass oil (3.2 μL/mL or 0.32% v/v) eradicated the pre-established fungal biofilm by 99.0% in an exposure time of 1 hour. In contrast, high concentrations of 8 and 16 times the minimum inhibitory concentration of cinnamon oil (0.8 μL/mL or 0.08% v/v) and lemongrass oil (6.4 μL/mL or 0.64% v/v) coated on PMMA specimens for 24 hours were only able to inhibit the formation of fungal biofilm by approximately 70.0%.

CONCLUSIONS

Cinnamon and lemongrass essential oils can eliminate pre-established C albicans biofilm and restrain the formation of fungal biofilm on heat-polymerized PMMA specimens. Both effects of the tested essential oils depended on dose and exposure or priming time.

Effectiveness of disinfectants on the adherence of Candida albicans to denture base resins with different surface textures

The aim of the present study was to compare the effects of some disinfectants, including ethanol extract of propolis (EEP), on the adhesion of Candida albicans to denture base resins. Seventy-two acrylic resin samples were prepared, half of which was polished and the other half was roughened. C. albicans strain ATCC 10231 was incubated on Sabouraud dextrose agar (SDA) at 37°C for 48 h. The adhesion period was completed by keeping the cells in this suspension for 90 min at 37°C. Specimens were then immersed in the following solutions: 1%, 2%, and 5% sodium hypochlorite; 4% chlorhexidine gluconate; and 10% EEP. Quantification of the antifungal activity of the chemical solutions was performed using the colorimetric MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay test. One-way ANOVA and post-hoc Tukey tests were performed to evaluate the effectiveness of chemical agents. Polished and roughened surfaces were compared using independent sample t-test. The mean surface roughness value was 0.35 (±0.04) µm for the polished group and 1.2 (±0.2) µm for the roughened group. The contact angles of both surfaces showed statistically significant difference, and 10% EEP solution exhibited significantly less removal of adherent viable C. albicans cells in both groups. All forms of sodium hypochlorite solutions yielded higher efficiency than 4% chlorhexidine gluconate and EEP solutions (P < 0.05). (J Oral Sci 58, 431-437, 2016).

Evaluation of the effect of denture adhesives on surface roughness of two chemically different denture base resins

Objective:

To evaluate the effect of four commercially available denture adhesives (DAs) on surface roughness of two chemically different denture base materials.

Materials and Methods:

Fifty specimens of heat-cured polymethyl methacrylate, and another fifty specimens of light-cured urethane dimethacrylate were divided into five groups (n = 10), each was immersed in four prepared DAs (Corega Super Cream, Corega Ultra Powder, Olivafix Cream, Protefix Cream) as well as distilled water (control group). The mean surface roughness (R_a) of the polished and unpolished surfaces of the specimens was recorded using profilometer device. T-test for paired observation was used to indicate any changes in surface roughness between the baseline and after 30 days of immersion in the DA.

Results:

Almost all the tested DAs had no significant effect on the roughness of polished and unpolished surfaces of both denture base materials. The Corega super cream DA produced significant increase in the roughness of the polished surfaces of both types of acrylic specimens (P < 0.05).

Conclusion:

The majority of the investigated DAs appears not to affect the surface roughness of denture base materials. Only Corega super cream DA produced detectable increase in the roughness of polished surfaces of denture base specimens.

Does propolis help to maintain oral health?

Propolis, known also as bee glue, is a wax-cum-resin substance which is created out of a mix of buds from some trees with the substance secreted from bee's glands. Its diverse chemical content is responsible for its many precious salubrious properties. It was used in medicine already in ancient Egypt. Its multiple applications during the centuries have been studied and described in details. The purpose of this study is to present the possible use of propolis in treatment of various diseases of oral cavity in their dental aspect. The paper presents properties and possible applications of bee glue depending on dental specialities. An overview of publications which appeared during the recent years will allow the reader to follow all the possibilities to apply propolis in contemporary dentistry.

The effect of antifungal agents on surface properties of poly(methyl methacrylate) and its relation to adherence of Candida albicans

PURPOSE

Candida-associated denture stomatitis is the most prevalent form of oral candidosis affecting 65% of denture wearers. Failure of therapy and recurrence of infection are not uncommon and the continuous use of antifungal agents may affect the surface properties of the denture material and may contribute to Candida adhesion. This study aimed to investigate surface properties of poly(methyl methacrylate) PMMA denture material before and after exposure to antifungal agents and its relation to in vitro adhesion of Candida albicans.

METHODS

Four groups of acrylic specimens (20 mm × 20 mm × 2.5mm) were prepared (25 specimens in each group). Specimens were immersed in nystatin (group 1), fluconazole (group 2), distilled water (group 3) and group 4 was not exposed. Specimens were tested for surface roughness, contact angle, surface hardness and in vitro Candida adherence to PMMA.

RESULTS

The results showed that nystatin had no statistically significant effect on surface hardness (P>0.05), but had a statistically significant effect on surface roughness, contact angle, and Candida adhesion to PMMA (P<0.05). On the other hand, fluconazole had no statistically significant effect on surface hardness or roughness (P>0.05), but had a statistically significant effect on contact angle, and Candida adhesion to PMMA (P<0.05). Distilled water had no statistically significant effect on surface hardness, roughness, contact angle, or Candida adhesion to PMMA (P>0.05).

CONCLUSIONS

Exposure of PMMA to nystatin may induce changes in roughness, wettability while exposure to fluconazole may affect surface free energy and therefore may increase Candida adhesion to it.

One-pot synthesis of a new antifungal polymerisable monomer and its characterisation by coordination-ion spray mass spectrometry

We have investigated the synthesis of a new antifungal agent with a polymerisable moiety for the prevention of denture stomatisis. Nystatin (antifungal polyene) is modified in one step by reaction with isocyanatoethylmethacrylate to afford a new polymerisable antifungal agent in good yield (90%). In order to prove the monografting of the acrylate derivative and to localise the new group in the skeleton of the molecule, a rapid and efficient analytical method involving electrospray ionisation mass spectrometry (ESI-MS) was developed for the study. In view of the structures of such antifungal agents, their complexation with metal cations was investigated by Coordination-Ion Spray Mass Spectrometry (CIS-MS). This mass spectrometry study covers two aspects: improving the MS signal to overcome the low ionisation efficiency in ESI-MS and exploring the complexation behaviour of the induced structure to optimise the antifungal properties.

Bioactivity and architecture of Candida albicans biofilms developed on poly(methyl methacrylate) resin surface

The aim of this study was to evaluate the bioactivity and architecture of Candida albicans biofilms developed on the surface of poly(methyl methacrylate) (PMMA) resin. To do this, surface roughness (SR) and surface free energy of PMMA specimens were measured. Next, the biofilms of two different C. albicans strains (ATCC 90028 and SC5314) were allowed to develop on the PMMA surface and evaluated at 24, 48, and 72 h after adhesion. The bioactivity of the biofilms was measured by the XTT reduction assay. Biofilm topography was evaluated by scanning electron microscopy. Confocal microscopy was used to evaluate the architectural properties of bio-volume, average thickness, biofilm roughness, surface area/volume ratio and the proportion of live/dead cells in the different biofilm development stages. SR and SFE had no influence on biofilm development. Each strain exhibited a different biofilm activity (P < 0.001). Confocal images showed different architectures for the different biofilm development stages. We conclude that the main differences detected in biofilm bioactivity and architecture were related to the characteristics of each C. albicans strain and to biofilm development time.

Polytetrafluorethylene added to acrylic resins: mechanical properties

The addition of different polymers, such as polytetrafluorethylene (PTFE), to denture base resins could be an option to modify acrylic resin mechanical properties. This study evaluated the surface hardness, impact and flexural strength, flexural modulus and peak load of 2 acrylic resins, one subjected to a long and another subjected to a short polymerization cycle, which were prepared with or without the addition of 2% PTFE. Four groups were formed according to the polymerization cycle and addition or not of PTFE. Forty specimens were prepared for each test (10 per group) with the following dimensions: hardness (30 mm diameter x 5 mm thick), impact strength (50 x 6 x 4 mm) and flexural strength (64 x 10 x 3.3 mm) test. The results of the flexural strength test allowed calculating flexural modulus and peak of load values. All tests were performed in accordance with the ISO 1567:1999 standard. Data were analyzed statistically by ANOVA and Tukey's test with the level of significance set at 5%. No statistically significant differences (p>0.05) were found for surface hardness. Flexural strength, impact strength and peak load were significantly higher (p<0.05) for resins without added PTFE. The flexural modulus of the acrylic resin with incorporated 2% PTFE polymerized by long cycle was significantly higher (p<0.05) than that of the other resins. Within the limits of this study, it may be concluded that the addition of PTFE did not improve the mechanical properties of the evaluated acrylic resins.