Effect of an additional hydrophilic versus hydrophobic coat on the quality of dentinal sealing provided by two-step etch-and-rinse adhesives

Optimizing Dental Bond Strength: Insights from Comprehensive Literature Review and Future Implications for Clinical Practice

This review examines the modifying factors affecting bond strength in various bonding scenarios, particularly their relevance to the longevity of dental restorations. Understanding these factors is crucial for improving clinical outcomes in dentistry. Data were gathered from the PubMed database, ResearchGate, and Google Scholar resources, covering studies from 1992 to 2022. The findings suggest that for dentin-resin bonds, minimizing smear layers and utilizing MMP inhibitors to prevent hybrid layer degradation are essential. In the case of resin-resin bonds, reversing blood contamination is possible, but preventing saliva contamination is more challenging, underscoring its critical importance during clinical procedures. Additionally, while pretreatment on ceramics has minimal impact on bond strength, the influence of specific colorings should be carefully considered in treatment planning. This comprehensive review highlights that although established practices recognize significant bond strength factors, ongoing research provides valuable insights to enhance the clinical experience for patients. Once confirmed through rigorous experimentation, these emerging findings should be swiftly integrated into dental practice to improve patient outcomes.

Development of a Boron Nitride-Filled Dental Adhesive System

There is a dearth of adhesive systems capable of forming stable bonds between restorative materials and tooth surfaces. To address the concern, this study determined the effects of using methacrylate-functionalized boron nitride nanosheets (BNNSs) in a polymeric dental adhesive system. The bisphenol A glycidyl dimethacrylate (BisGMA):2 hydroxyethyl methacrylate (HEMA) (60:40) adhesive monomer blend with a photoinitiator was filled with 0 wt% (control), 0.1 wt%, and 1 wt% BNNSs and light cured. Fourier transform infrared spectroscopy was performed to determine the conversion degree of monomer double bonds (DoC). Water absorption and solubility were measured. Flexural strength and Youngs's modulus were evaluated to determine the mechanical properties of the composite adhesive system. Finally, dentin bond strength degradation and fracture mode were quantified with a microtensile bond test to confirm the bonding ability of the developed adhesive system. Results showed that the incorporation of BNNSs increased DoC (9.8% and 5.4% for 0.1 and 1 wt%, respectively), but it did not affect water sorption (101.9-119.72 (µg/mm3)), solubility (2.62-5.54 (µg/mm3)), Young's modulus (529.1-1716.1 MPa), or microtensile bond strength (46.66-54.72 MPa). Further studies are needed with varying BNNS loading percentages from 0.1 wt% to 1 wt% in order to more comprehensively determine the effect of BNNSs on dental adhesives.

Effect of Different Application Modalities on the Bonding Performance of Adhesive Systems to Dentin: A Systematic Review and Meta-Analysis

Diverse types of dental adhesives exhibit different cytotoxic outcomes on cells in vitro. Currently, no standard adhesive application technique has so far been decisive for clinicians for better durability of resin-dentin bonds of adhesive systems. The purpose of this study was to systematically review the literature to evaluate the bonding performance of adhesive systems to dentin by using different application modalities. The systematic research strategy was conducted by two reviewers among multiple databases: PubMed, Scopus, Web of Science, Embase, and Scielo. In vitro studies reporting the effects of additional steps for the application of adhesive systems on the bond strength to dentin were selected. Meta-analysis was performed using Review Manager Software version 5.3.5 using the random effects model. The methodological quality of each in vitro study was assessed according to the parameters of a previous systematic review. The electronic research through different databases generated a total of 8318 references. After the examination of titles and abstracts, a total of 106 potentially relevant studies accessed the full-text evaluation phase. After full-text examination, 78 publications were included for the qualitative analysis, and 68 studies were included in the meta-analysis. Regarding the etch-and-rinse adhesive systems, the application modalities that improved the overall bond strength were the application of a hydrophobic resin layer (p = 0.005), an extended application time (p < 0.001), an application assisted by an electric current (p < 0.001), a double-layer application (p = 0.05), the agitation technique (p = 0.02), and the active application of the adhesive (p < 0.001). For self-etch adhesive systems, the techniques that improved the overall bond strength were the application of a hydrophobic resin layer (p < 0.001), an extended application time (p = 0.001), an application assisted by an electric current (p < 0.001), a double-layer application (p < 0.001), the agitation technique (p = 0.01), and the active application of the adhesive (p < 0.001). The in vitro evidence suggests that the application of adhesive systems using alternative techniques or additional strategies may be beneficial for improving their bond strength to dentin. The application modalities that favored the overall bond strength to dentin were an extended application time, a double-layer application, an application assisted by an electric current, the active application of the adhesive, and the application of a hydrophobic resin layer. Worth mentioning is that some techniques are intended to increase the degree of the conversion of the materials, and therefore, improvements in the biocompatibility of the materials can be expected.

A multi-functional dentine bonding system combining a phosphate monomer with eugenyl methacrylate

OBJECTIVE

The tooth-resin composite interface is frequently associated with failure because of microbial contamination, hydrolytic and collagenolytic degradation. Thus, designing a dentine bonding system (DBS) with an intrinsically antimicrobial polymerisable monomer is of significance especially if it can be used with self-etching primers enabling resistance to degradation of the interface.

METHODS

Experimental adhesives were developed incorporating eugenyl methacrylate (EgMA) at concentrations of 0,10 or 20 wt%, designated as EgMA0, EgMA10 and EgMA20, respectively, for use as a two-step self-etch DBS with the functional monomer bis[2-(methacryloyloxy) ethyl] phosphate (BMEP) in the primer. The curing, thermal and wettability properties of the adhesives were determined, and hybrid layer formation was characterised by confocal laser scanning microscopy, microtensile bond strengths (µTBS) and nanoleakage by back-scattered SEM. In situ zymography was used to assess MMP inhibitory activity of the BMEP-EgMA DBS.

RESULTS

EgMA in the adhesives lowered the polymerisation exotherm and resulted in higher Tg, without negatively affecting degree of conversion. Water sorption and solubility were significantly lower with higher concentrations of EgMA in the adhesive. The formation of a distinct hybrid layer was evident from confocal images with the different adhesives, whilst EgMA20 yielded the highest µTBS post water storage challenges and lowest nanoleakage after 6 months. The experimental DBS exhibited minimal to no MMP activity at 3 months.

SIGNIFICANCE

The hydrophobic nature of EgMA and high cross-link density exerts considerable benefits in lowering water uptake and polymerisation exotherm. The application of EgMA, adhesives in conjunction with BMEP in a multi-functional self-etching DBS can resist MMP activity, hence, enhance longevity of the dentine-resin composite interface.

Evaluation of the Interfaces between Restorative and Regenerative Biomaterials Used in Vital Pulp Therapy

BACKGROUND

Calcium-silicate-based cements (CSC) have gained an increasing scientific and clinical relevance, enabling more conservative approaches, namely pulp preservation and regeneration therapies. This research aims to study the influence of four clinical variables on the interfaces between CSC and composite adhesive restoration, concerning shear bond strength (SBS) and ultra-morphological patterns.

METHODS

SBS tests were performed in 320 specimens divided in 16 groups (n = 20) according to: two CSC (NuSmile^® NeoMTA, Biodentine^TM); two adhesive systems (Clearfil^TM SE Bond 2 (CSEB2), Clearfil^TM Universal Bond Quick (CUBQ)); optional application of an additional hydrophobic bonding layer (HBL); two restoration times (immediate, seven days). Scanning electron microscopy (SEM) was performed to conduct the ultra-morphology interface analysis in 32 deciduous molars prepared and randomly allocated into the 16 groups.

RESULTS

Globally, SBS tests showed higher bond strength of CUBQ compared to CSEB2 (p < 0.001), as with an additional HBL application (p = 0.014) and delayed restoration (p < 0.001). SEM showed the interpenetration between adhesive systems and CSC forming a hybrid layer, whose depth and thickness depended on the restoration time and adhesive strategy.

CONCLUSIONS

The independent clinical variables adhesive system, application of an additional HBL and restoration time affected the bond performance and ultra-morphological interface between composite adhesive restoration and CSC.

Effects of calcium-phosphate, laser and adhesive on dentin permeability and bond strength

Objectives

The present study examined a technique for reducing dentin permeability through the application of a calcium phosphate (CaP)-based desensitiser with a laser-assisted process and evaluated adhesive-dentin bond strength. Methods: Thirty dentin discs were divided into two groups according to whether the selected desensitiser (TeethMate; Kuraray Noritake) was used prior to dentin bonding. Each group was subdivided into three subgroups (n = 5): A- Adhesive (Single Bond Universal, 3M ESPE), AL- Adhesive + Laser (Nd:YAG 60 mJ) and LAL- Laser + Adhesive + Laser. Dentin permeability values (%) were recorded before and after desensitiser application. Resin composites were placed over the bonded specimens; the latter were aged prior to microtensile bond strength evaluation. Gelatinolytic activity within the hybrid layers was examined with in-situ zymography using confocal laser scanning microscopy. Data were analysed with ANOVA and Tukey test (α = 0.05).

Results

Significant differences in dentin permeability were identified for all groups (p = 0.00). Both laser treatment (p = 0.182) and desensitiser application (p = 0.687) did not significantly improve dentin bond strength. Ultrastructure of the resin-dentin interface identified presence of calcium phosphate within dentinal tubules. Laser treatment did not affect hybrid layer ultrastructure. Both treatment modalities (intratubular CaP occlusion and laser) had no influence on gelatinolytic activity within hybrid layers.

Conclusion

Although intratubular CaP occlusion and laser treatment were effective in reducing dentin permeability, they did not affect bond strength, interfacial ultrastructure and gelatinolytic activity within hybrid layers.

Clinical relevance

Treatment of etched dentin with Nd:YAG Laser at 60 mJ does not adversely affect collagen ultrastructure and gelatinolytic activity within the hybrid layer. The application of a calcium phosphate-based desensitiser to etch dentin does not affect dentin bond strength.

Effect of a hydrophobic bonding resin on the 36-month performance of a universal adhesive-a randomized clinical trial

OBJECTIVES

To evaluate if the addition of a layer of a hydrophobic bonding resin to the recommended application sequence of a universal adhesive improves the respective clinical behavior in non-carious cervical lesions (NCCLs) after 36 months.

MATERIALS AND METHODS

Scotchbond Universal Adhesive (SBU, 3M Oral Care) was applied in NCCLs of 39 subjects using four adhesion strategies: (1) three-step ER (etch-and-rinse), (2) two-step ER, (3) two-step SE (self-etch), and (4) one-step SE. An extra layer of a hydrophobic bonding resin was applied for strategies three-step ER and two-step SE. The same composite resin (Filtek Supreme XTE, 3M Oral Care) was used for all strategies. Restorations were evaluated at baseline and 18 and 36 months using the modified United States Public Health Service (USPHS) criteria. Kruskal-Wallis, Mann-Whitney U, Friedman, and Wilcoxon non-parametric tests were computed.

RESULTS

The cumulative failure rate was 8.6%. The 36-month retention rates were 100% for both 3-ER and 2-ER, 76.0% for 2-SE, and 86.2% for 1-SE. A lower retention rate was observed for two-step SE at 36 months compared with both three-ER (p < 0.01) and two-ER (p < 0.01). Identical retention rates were measured for the two SE groups. When retention rate was compared at baseline versus 36 months for each adhesion strategy, a significant decrease was observed for 2-SE. The restorations performed with 3-ER, 2-SE, and 1-SE had a significant deterioration in marginal discoloration at the 18-month recall.

CONCLUSIONS

The 36-month clinical performance of Scotchbond Universal Adhesive improved for both etch-and-rinse strategies.

CLINICAL RELEVANCE

Phosphoric acid etching is still recommended to provide retention to composite restorations in NCCLs.

Effects of different etching modes on the nanoleakage of universal adhesives: A systematic review and meta-analysis

PURPOSE

The aim of this systematic review was to evaluate how etching modes affect the nanoleakage of universal adhesive from in vitro studies.

MATERIALS AND METHODS

PubMed/MEDLINE, Web of Science, Scopus and Science Direct electronic databases were searched for in vitro studies that evaluated the nanoleakage of universal adhesives. A total of 511 (after duplicate removal) potentially relevant records were identified in the literature search. The titles and abstracts of the retrieved studies were screened by two independent researchers according to the main concept. Subsequently, the full text of potentially relevant studies was screened using the exclusion criteria. Thirteen studies were subjected to qualitative analysis, and 5 of them were selected for a detailed meta-analysis.

RESULTS

Seven universal adhesives were evaluated in this review. The meta-analysis demonstrated that the etch-and-rinse technique significantly reduced the nanoleakage of the Peak Universal and G-Bond Plus adhesives, whereas the self-etch mode reduced the nanoleakage of All-Bond Universal. In comparison, the etching technique did not significantly alter the nanoleakage of either Prime&Bond Elect or Scotchbond Universal which was characterized by the smallest nanoleakage.

CONCLUSIONS

Etching modes significantly, in various ways, influence the nanoleakage of universal adhesives.

CLINICAL SIGNIFICANCE

Contrary to the drive to simplify bonding technologies, an appreciation of their adhesive components and how these perform according to bonding technique could yield a knowledge-based practical approach that ultimately improves the longevity of direct composite restorations.

Shear bond strength and scanning electron microscopy characteristics of universal adhesive in primary tooth dentin: An in vitro study

BACKGROUND

The aim of the study was to evaluate the adhesion of Scotchbond Universal Adhesive to primary tooth dentin by measuring shear bond strength (SBS) and observing morphological changes with scanning electron microscopy (SEM).

MATERIALS AND METHODS

In this in vitro study, a total of 60 primary canine teeth were randomly divided into 5 groups (n = 12). The study groups were (1) Phosphoric acid etching + Adper Single Bond 2 (control), (2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse), (3) Scotchbond Universal (self-etch), (4) phosphoric acid etching + Scotchbond Universal + resin, and (5) Scotchbond Universal + resin. Composite cylinders were built on the tooth surface, and 10 samples in each group were selected for SBS testing and identification of the failure modes. Two samples from each group were observed by SEM. One-way ANOVA and Tukey honestly significant difference post hoc test were used for data analysis P value < 0.05 was considered statistically significant.

RESULTS

The results showed that SBS in Group 1 was significantly lower than in Groups 2, 3, and 4 (all P < 0.001). There was no significant difference between Groups 2 and 3 (P = 0.98), or between Groups 3 and 4 (P = 0.97). There was no significant difference between Groups 2 and 4 (P = 0.999) or between Groups 1 and 5 (P = 0.156). Mixed and cohesive failures were more frequent in Groups 2, 3 and 4. SEM observations showed that applying phosphoric acid to the dentin before Scotchbond Universal adhesive resulted in more open dentinal tubules and more resin tag impregnation.

CONCLUSION

There was no significant difference in SBS between Scotchbond Universal Adhesive in etch-and-rinse and self-etching modes. The SBS of Scotchbond Universal Adhesive in etch-and-rinse mode was greater than Adper Single Bond 2.

Effect of different adhesive strategies on microtensile bond strength of computer aided design/computer aided manufacturing blocks bonded to dentin

Background:

The aim of this study was to determine the microtensile bond strength (μTBS) of ceramic and composite computer aided design-computer aided manufacturing (CAD-CAM) blocks bonded to dentin using different adhesive strategies.

Materials and Methods:

In this in vitro study, 30 crowns of sound freshly extracted human molars were sectioned horizontally 3 mm above the cementoenamel junction to produce flat dentin surfaces. Ceramic and composite CAD/CAM blocks, size 14, were sectioned into slices of 3 mm thick. Before bonding, CAD/CAM block surfaces were treated according to the manufacturer's instructions. Groups were created based on the adhesive strategy used: Group 1 (GI) - conventional resin cement + total-etch adhesive system, Group 2 (GII) - conventional resin cement + self-etch adhesive system, and Group 3 (GIII) - self-adhesive resin cement with no adhesive. Bonded specimens were stored in 100% humidity for 24h at 37΀C, and then sectioned with a slow-speed diamond saw to obtain 1 mm × 1 mm × 6 mm microsticks. Microtensile testing was then conducted using a microtensile tester. μTBS values were expressed in MPa and analyzed by one-way ANOVA with post hoc (Tukey) test at the 5% significance level.

Results:

Mean values and standard deviations of μTBS (MPa) were 17.68 (±2.71) for GI/ceramic; 17.62 (±3.99) for GI/composite; 13.61 (±6.92) for GII/composite; 12.22 (±4.24) for GII/ceramic; 7.47 (±2.29) for GIII/composite; and 6.48 (±3.10) for GIII/ceramic; ANOVA indicated significant differences among the adhesive modality and block interaction (P < 0.05), and no significant differences among blocks only, except between GI and GII/ceramic. Bond strength of GIII was consistently lower (P < 0.05) than GI and GII groups, regardless the block used.

Conclusion:

Cementation of CAD/CAM restorations, either composite or ceramic, can be significantly affected by different adhesive strategies used.

The effect of saliva decontamination procedures on dentin bond strength after universal adhesive curing

Objectives

The purpose of this study was to investigate the effectiveness of multiple decontamination procedures for salivary contamination after curing of a universal adhesive on dentin bond strength according to its etch modes.

Materials and Methods

Forty-two extracted bovine incisors were trimmed by exposing the labial dentin surfaces and embedded in cylindrical molds. A universal adhesive (All-Bond Universal, Bisco) was used. The teeth were randomly divided into groups according to etch mode and decontamination procedure. The adhesive was applied according to the manufacturer's instructions for a given etch mode. With the exception of the control groups, the cured adhesive was contaminated with saliva for 20 sec. In the self-etch group, the teeth were divided into three groups: control, decontamination with rinsing and drying, and decontamination with rinsing, drying, and adhesive. In the etch-and-rinse group, the teeth were divided into four groups: control, decontamination with rinsing and drying, decontamination with rinsing, drying, and adhesive, and decontamination with rinsing, drying, re-etching, and reapplication of adhesive. A composite resin (Filtek Z350XT, 3M ESPE) was used for filling and was cured on the treated surfaces. Shear bond strength was measured, and failure modes were evaluated. The data were subjected to one-way analysis of variation and Tukey's HSD test.

Results

The etch-and-rinse subgroup that was decontaminated by rinse, drying, re-etching, and reapplication of adhesive showed a significantly higher bond strength.

Conclusions

When salivary contamination occurs after curing of the universal adhesive, additional etching improves the bond strength to dentin.

Influence of a hydrophobic resin coating on the immediate and 6-month dentin bonding of three universal adhesives

OBJECTIVE

To test the influence of a hydrophobic resin coating (HC) on the immediate (24h) and 6-month (6m) microtensile dentin bond strengths (μTBS) and nanoleakage (NL) of three universal adhesives applied in self-etch (SE) or in etch-and-rinse (ER) mode.

METHODS

Sixty caries-free extracted third molars were assigned to 12 experimental groups resulting from the combination of the factors "adhesive system" (Scotchbond Universal Adhesive [SBU], 3M ESPE; All-Bond Universal [ABU], Bisco Inc.; and G-Bond Plus [GBP], GC Corporation); "adhesive strategy" (SE or ER); "hydrophobic resin coating" [HC] (with or without Heliobond, Ivoclar Vivadent); and "storage time" (24h or 6m). Specimens were prepared for μTBS testing - (24h) half of the beams were immediately tested under tension; and (6m) the other half was stored in distilled water (37°C) for 6m prior to testing. For each tooth, two beams were randomly selected for NL evaluation for both evaluation times. Data were analyzed for each adhesive system using three-way ANOVA and Tukey's post-hoc test (α=0.05).

RESULTS

μTBS: (24h): In SE mode, HC resulted in statistically greater mean μTBS for all adhesives. (6m): When HC was not used the mean μTBS for SBU/ER, ABU/ER, GBP/ER and SBU/SE decreased significantly. NL: (24h): SBU/ER, ABU/ER and GBP/SE resulted in a significant reduction in NL when HC was applied. (6m): No significant reduction was observed for SBU/ER or for SBU/SE regardless of the use of HC.

SIGNIFICANCE

The application of a hydrophobic resin coating improved the 24h and the 6m performances of all three adhesives systems in SE mode.

Effect of Collagen Matrix Saturation on the Surface Free Energy of Dentin using Different Agents

INTRODUCTION

The surface free energy of conditioned-dentin is one of the factors that interfere with monomeric infiltration of the interfibrillar spaces. Saturation of the tooth matrix with different substances may modulate this energy and, consequently, the wettability of the dentin.

AIM

To evaluate the influence of different substances used to saturate conditioned-dentin on surface free energy (SFE) of this substrate.

MATERIALS AND METHODS

Dentin blocks (4 × 7 × 1 mm, n = 6/ group), obtained from the roots of bovine incisors, were etched using phosphoric acid for 15 seconds, rinsed and gently dried. The surfaces were treated for 60 seconds with: ultra-purified water (H20-control); ethanol (EtOH), acetone (ACT), chlorhexidine (CHX), ethylenediaminetetraacetic acid (EDTA); or sodium hypochlorite (NaOCl). The tooth surfaces were once again dried with absorbent paper and prepared for SFE evaluation using three standards: water, formamide and bromonaphthalene. Analysis of variance (ANOVA) and Dunnet's tests (a = 0.05) were applied to the data.

RESULTS

Ethylenediaminetetraacetic acid was the only substance that caused a change to the contact angle for the standards water and formamide, while only EtOH influenced the angles formed between formamide and the dentin surface. None of the substances exerted a significant effect for bromonaphtha-lene. In comparison to the control, only EDTA and NaOCl altered both polar components of the SFE. Total SFE was increased by saturation of the collagen matrix by EDTA and reduced when NaOCl was used.

CONCLUSION

Saturation of the collagen matrix by EDTA and EtOH changed the surface free energy of the dentin. In addition, the use of NaOCl negatively interfered with the properties evaluated.

CLINICAL SIGNIFICANCE

The increase of surface free energy and wettability of the dentin surface would allow higher penetration of the the adhesive system, which would be of importance to the clinical success of resin-dentin union.

Randomized clinical trial of four adhesion strategies in posterior restorations-18-month results

PURPOSE

To evaluate the 18-month clinical performance of four adhesive strategies in posterior composite restorations placed in private practice.

MATERIALS AND METHODS

Upon approval by an institutional review board, 144 restorations were inserted in 45 subjects (average age = 32.6) to treat caries lesions or to replace existing restorations in vital molars and premolars. The adhesives OptiBond FL (three-step etch-and-rinse), OptiBond SOLO Plus (two-step etch-and-rinse), OptiBond XTR (two-step self-etch), and OptiBond All-in One (one-step self-etch) were applied as per manufacturer's (Kerr Co.) instructions followed by a nanofilled resin composite (Filtek Z350XT, 3M ESPE) under rubber dam isolation. Restorations were evaluated at baseline and at 18 months using United States Public Health Service (USPHS)-modified criteria and high-resolution digital photographs. Statistical analyses included the McNemar and the Mann-Whitney non-parametric tests (p < 0.05).

RESULTS

A total of 137 restorations were evaluated after 18 months. The number of alfa ratings did not change significantly from baseline to 18 months for any of the adhesion strategies. When the 18-month evaluation criteria were pooled by pairs of adhesives, none of the adhesives resulted in a significantly different number of alfa ratings for any of the criteria compared with the other adhesives.

CONCLUSION

Bonding strategy did not influence the clinical performance of posterior composite restorations under the clinical conditions used in this study.

CLINICAL SIGNIFICANCE

When used in ideal clinical conditions, the composition of current dentin adhesives may be more clinically relevant than their adhesion strategy.

Overview of Clinical Alternatives to Minimize the Degradation of the Resin-dentin Bonds

The incorporation of hydrophilic and acidic resin monomers substantially improved the initial bonding of contemporary etch-and-rinse (ER) and self-etch (SE) adhesives to intrinsically wet dental substrates, providing quite favorable immediate results, regardless of the bonding approach used. However, in the long term, the bonding effectiveness of most simplified ER and SE adhesives drop dramatically. This review examines the fundamental processes that are responsible for the aging mechanisms involved in the degradation of the resin-bonded interfaces and some possible clinical approaches that have been effective in minimizing or even preventing the degradation of the adhesive interfaces produced with simplified adhesives. The incorporation of some of the feasible approaches - described in this review - may improve the quality of the adhesive restorations performed in clinical practice, while manufacturers develop bonding materials that are less susceptible to the aging mechanisms present in the oral environment.

Marginal adaptation of class V composite restorations submitted to thermal and mechanical cycling

Objective:

This study evaluated the effect of the margin location and an adhesive system on the marginal adaptation of composite restorations.

Material and Methods:

Class V cavities were prepared in bovine teeth with the gingival margin on the dentin and the incisal margin on the enamel. The cavities were restored with a micro-hybrid composite resin using an etch-and-rinse [Single Bond 2 (SB)] or a self-etching adhesive [Clearfil SE Bond (CL)]. After finishing and polishing the restorations, epoxy replicas were prepared. The marginal adaptation was analyzed using scanning electronic microscopy (SEM, 500 x magnification). The higher gap width in each margin was recorded (T0). After the first evaluation, the samples were submitted to thermal cycling (2,000 cycles of 5ºC±2ºC followed by 55ºC±2ºC - T1) and mechanical cycling (100,000 cycles of 50 kN and 2 Hz - T2). Replicas of samples were rebuilt after each cycling and analyzed under SEM. The data were submitted to Mann-Whitney, Wilcoxon and Friedman testing (a=0.05).

Results:

The SB presented higher gaps in the dentin than the enamel, while there was no difference between the substrate for the CL. In the dentin, the CL showed better marginal sealing than the SB. The opposite occurred in the enamel. There were no significant differences between the baseline, thermal and mechanical cycling for any experimental condition.

Conclusions:

The outcomes of the present study showed that the adhesive system and margin location have an important effect on the marginal adaptation of composite restorations.

Adhesive systems: important aspects related to their composition and clinical use

This literature review article addresses the types and the main components of different etch-and-rinse and self-etch adhesive systems available in the market, and relates them to their function, possible chemical interactions and influence of handling characteristics. Scanning electron microscopy (SEM) images are presented to characterize the interface between adhesives and dentin. Adhesive systems have been recently classified according to their adhesion approaches in etch-and-rinse, self-etch and glass ionomer. The etch-andrinse systems require a specific acid-etch procedure and may be performed in two or three steps. Self-etch systems employ acidic monomers that demineralize and impregnate dental substrates almost at the same time. These systems are separated in one or two steps. Some advantages and deficiencies were noted for etch-and-rinse and self-etch approaches, mainly for the simplified ones due to some chemical associations and interactions. The SeM micrographs illustrate different relationships between adhesive systems and dental structures, particularly dentin. The knowledge of composition, characteristics and mechanisms of adhesion of each adhesive system is of fundamental importance to permit the adoption of ideal bonding strategies under clinical conditions.