Adhesion strategy and early bond strengths of glass-fiber posts luted into root canals

Push-out bond strength and failure mode of single adjustable and customized glass fiber posts

Purpose

To evaluate the push-out bond strength (PBS) and failure mode of single adjustable (SAP) and customized (CP) posts cemented to root canal dentin using conventional (RelyX Ultimate) or self-adhesive (RelyX U200) dual-cure resin cements.

Methods

Herein, 40 bovine mandibular incisors were divided into four groups (n = 10): SAP cemented with RelyX Ultimate (SAP-UT), SAP cemented with RelyX U200 (SAP-U2), CP cemented with RelyX Ultimate (CP-UT), and CP cemented with RelyX U200 (CP-U2). PBS and failure modes were analyzed. Three-way repeated measures ANOVA test followed by Tukey’s test and Fisher–Freeman–Halton exact test were used for data analysis (α = 5%).

Results

The PBS values for SAP (p < .05) were higher than those for CP and were not influenced by the root third and resin cement (p > .05). When conventional resin cement was used, the SAP showed significant differences compared to CP (p < .05). When cemented with RelyX Ultimate, a higher prevalence of mixed and adhesive failures for SAP and CP, respectively, was observed (p < .05). For the self-adhesive resin cement, the failures were mostly adhesive (p < .05).

Conclusion

SAP showed better performance than CP. The root third and resin cements did not influence the PBS. The most prevalent failures were adhesive and mixed.

Effect of surface treatment on the dislocation resistance of prefabricated esthetic fiber posts bonded with self-adhesive resin cement: A systematic review and meta-analysis

Background:

This systematic review aimed to determine the presence of any in vitro proof to validate the utilization of surface treatments to advance the bond strength of fiber posts to intraradicular dentin with self-adhesive resin cements.

Methodology:

Laboratory studies that assessed the push-out or pull-out bond strength of the prefabricated esthetic posts whose surface was treated with either chemical or physical treatment or a combination and bonded using self-adhesive resin cement within root canal model were included for this systematic review. The review began after obtaining the registration number from the International Prospective Register of Systematic Reviews (PROSPERO ID-CRD42020165009). Study reporting was performed following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Relevant articles were identified using a literature database search in Web of Science, Scopus, PubMed, and EBSCO. Besides this, handsearch was also done to ensure complete capture of the articles.

Results:

Fifteen articles were then selected and included in this study, out of which four were excluded for meta-analysis due to usage of the artificial substrate. It was shown that an additional step of surface treatment of esthetic fiber post did not result in significant improvement in dislocation resistance. Assessment of risk of bias categorized the available research into high risk and medium risk. The results showed heterogeneity.

Conclusion:

The use of additional steps such as chemical, mechanical, or a combination of post surface treatment does not have any added benefit. However, the results must be interpreted with caution due to methodological shortcomings.

Development of dual-cured resin cements with long working time, high conversion in absence of light and reduced polymerization stress

OBJECTIVE

This study evaluated the properties of experimental dual-cured cements containing thiourethane (TU) and low concentrations of p-Tolyldiethanolamnie (DHEPT) and benzoyl peroxide (BPO) as chemical initiators.

METHODS

BisGMA/TEGDMA-based dual-cured cement was formulated with 1.0 wt% DHEPT and 0.75 wt% BPO as initiators and used as control. The concentration of BPO was adjusted to 0.1 wt% in catalyst paste of experimental cements, and two base pastes containing TU and 0.5 wt% or 0.25 wt% of DHEPT were formulated. The rheological behavior and kinetics of polymerization of cements were assessed in the absence of light activation. The kinetics of polymerization was also evaluated for cements light-activated immediately or 5 min after the start of mixing. Polymerization stress, flexural strength and elastic modulus (n = 5) were also evaluated under these conditions.

RESULTS

Cements with TU presented lower viscosity than the control, improved working time (0.25% DHEPT > 0.5% DHEPT) and higher conversion in the absence of light-activation. Delaying the light-activation reduced the maximum rate of polymerization (Rpmax) but did not affect the conversion or stress. The addition of TU increased the Rpmax and conversion, and reduced the stress when compared to the control, without affecting the flexural strength. Except for the control with delayed light-activation (highest values), the other experimental conditions yielded similar modulus.

SIGNIFICANCE

Adding TU and using a low concentration of DHEPT/BPO resulted in dual-cured cements with longer working time, reduced polymerization stress and increased conversion even in the absence of light, with no significant effect on the mechanical properties.

Retrieval of Glass Fiber Post Using Er:YAG Laser and Conventional Endodontic Ultrasonic Method: An In Vitro Study

PURPOSE

To compare the times and temperatures used to remove a glass fiber post from an endodontically treated tooth using erbium-doped yttrium aluminum garnet (Er:YAG) compared to conventional endodontic ultrasonic method.

MATERIALS AND METHODS

Thirty-four single-root human extracted teeth were endodontically treated ex vivo. The post space was prepared to 7 mm in depth and a 11.4 mm glass fiber post was cemented using composite resin cement. Specimens were kept in 100% humidity for 24 hours and then randomly assigned to Er:YAG laser or ultrasonic methods for post removal. The removal time was recorded. Specimens with a fractured post during the removal process were excluded. The temperature on the external surface of the root was measured at the coronal, middle, and apical third portions during the laser or ultrasonic applications from 1 to 10 minutes. Data were analyzed using one-tailed t-test and paired t-test (ɑ = 0.01) for the post removal time and temperature difference, respectively. The specimen surfaces were examined using scanning electron microscopy (SEM).

RESULTS

Fifteen specimens were tested in each group. Four specimens were fractured, 2 in the laser and 1 in ultrasonic group. One post was excluded because of laser tip damage. The average removal time were 98 ± 46.1 seconds for Er:YAG laser and 538 ± 215.6 seconds or ultrasonic groups with significant difference between the groups (p < 0.001). The temperature (°C) ranges measured from 1 to 10 minutes were [24.2°, 27.3°] for laser and [33.0°, 38.0°] for ultrasonic in the cervical area, [22.1°,24.6°] for laser and [31.0°, 34.6°] for ultrasonic in the middle area, and [24.4°, 27.7°] for laser and [30.3°, 34.1°] for ultrasonic in the apical area. There were significant differences between temperatures for each treatment (p < 0.001). SEM examination showed no visible damage caused by treatment with Er:YAG laser.

CONCLUSIONS

Er:YAG laser can remove posts up to 5 times faster than ultrasonic removal method. The laser causes lower temperature increase at the root surface compared to the ultrasonic removal. Er:YAG may be considered as a viable alternative to sonication for post removal.

Effect of Glass Fiber Post Adaptation on Push-Out Bond Strength to Root Dentin

The aim of this study was to evaluate the effect of different glass fiber posts (GFPs) diameters on the push-out bond strength to dentin. Forty unirradicular human teeth were endodontically treated and used for cementation of GFPs (White Post DC, FGM) with different diameters (n=10): P1 - ø 1.6 mm coronal x 0.85 mm apical; P2 - ø 1.8 mm coronal x 1.05 mm apical; P5 - ø 1.4 mm coronal x 0.65 mm apical; and PC - customized post number 0.5 with composite resin (Tetric Ceram A2, Ivoclair Vivadent). All GFPs were cemented into the root canal using a dual-curing luting composite (Variolink II, Ivoclar Vivadent). One slice (1.7 mm) of each root third of cemented GFP (cervical, middle, and apical) was submitted to push-out testing. Failure modes of all specimens were classified as: adhesive failure between resin cement and post; adhesive failure between dentin and resin cement; cohesive failure within resin cement, post or dentin; and mixed failure. The data were analyzed with two-way ANOVA and Tukey's test (a=0.05). The highest bond strength values were presented for the P2 and PC groups. There was no statistically significant difference between the GFP thirds in each group. The groups P2, P5, and PC showed predominantly adhesive failure. For P1, the most prevalent type of failure was adhesive between resin cement and post. It may be concluded that a glass fiber post that is well adapted to the root canal presents higher bond strength values, regardless of GFP third.

Can intra-radicular cleaning protocols increase the retention of fiberglass posts? A systematic review

The presence of residues within the root canal after post-space preparation can influence the bond strength between resin cement and root dentin when using fiberglass posts (FGPs). Currently, there is no consensus in the literature regarding what is the best solution for the removal of debris after post-space preparation. This systematic review involved "in vitro" studies to investigate if cleaning methods of the root canal after post-space preparation can increase the retention of FGPs evaluated by the push-out test. Searches were carried out in PubMed (MEDLINE) and Scopus databases up to July2017. English language studies published from 2007 to July 2017 were selected. 475 studies were found, and 9 were included in this review. Information from the 9 studies were collected regarding the number of samples, storage method after extraction, root canal preparation, method of post-space preparation, endodontic sealer, resin cement, cleaning methods after post-space and presence of irrigant activation. Five studies presented the best results for the association of sodium hypochlorite (NaOCl) and ethylenediamine tetra-acetic acid (EDTA), while in the other 4 studies, the solutions that showed improved retention of FGPs were photon-induced photoacoustic streaming (PIPS), Qmix, Sikko and EDTA. The results showed heterogeneity in all comparisons due to a high variety of information about cleaning methods, different concentrations, application time, type of adhesive system and resin cements used. In conclusion, this review suggests that the use of NaOCl/EDTA results in the retention of FGPs and may thus be recommended as a post-space cleaning method influencing the luting procedure.

Polymerization shrinkage stress of composite resins and resin cements - What do we need to know?

Polymerization shrinkage stress of resin-based materials have been related to several unwanted clinical consequences, such as enamel crack propagation, cusp deflection, marginal and internal gaps, and decreased bond strength. Despite the absence of strong evidence relating polymerization shrinkage to secondary caries or fracture of posterior teeth, shrinkage stress has been associated with post-operative sensitivity and marginal stain. The latter is often erroneously used as a criterion for replacement of composite restorations. Therefore, an indirect correlation can emerge between shrinkage stress and the longevity of composite restorations or resin-bonded ceramic restorations. The relationship between shrinkage and stress can be best studied in laboratory experiments and a combination of various methodologies. The objective of this review article is to discuss the concept and consequences of polymerization shrinkage and shrinkage stress of composite resins and resin cements. Literature relating to polymerization shrinkage and shrinkage stress generation, research methodologies, and contributing factors are selected and reviewed. Clinical techniques that could reduce shrinkage stress and new developments on low-shrink dental materials are also discussed.

Delayed photo-activation and addition of thio-urethane: Impact on polymerization kinetics and stress of dual-cured resin cements

OBJECTIVE

1) to determine the moment during the redox polymerization reaction of dual cure cements at which to photo-activate the material in order to reduce the polymerization stress, and 2) to evaluate possible synergistic effects between adding chain transfer agents and delayed photo-activation.

METHODS

The two pastes of an experimental dual-cure material were mixed, and the polymerization kinetics of the redox phase was followed. The moment when the material reached its maximum rate of redox polymerization (MRRP) of cement was determined. The degree of conversion (DC) and maximum rates of polymerization (Rp_max) were assessed for materials where: the photoactivation immediately followed material mixing, at MRRP, 1min before and 1min after MRRP. Thio-urethane (TU) additives were synthesized and added to the cement (20% wt), which was then cured under the same conditions. The polymerization kinetics was evaluated for both cements photo-activated immediately or at MRRP, followed by measurements of polymerization stress, flexural strength (FS) and elastic modulus (EM). Knoop hardness was measured before and after ethanol storage.

RESULTS

Photo-activating the cement at or after MRRP reduced the Rp_max and the polymerization stress. Addition of TU promoted additional and more significant reduction, while not affecting the Rp_max. Greater hardness loss was observed for cements with TU, but the final hardness was similar for all experimental conditions. Addition of TU slightly reduced the EM and did not affect the FS.

CONCLUSION

Delayed photo-activation and addition of TU significantly reduce the polymerization stress of dual-cured cements.

Effect of Resin Cement Porosity on Retention of Glass-Fiber Posts to Root Dentin: An Experimental and Finite Element Analysis

The aim of this study was to evaluate the effect of porosity of self-adhesive resin on the stress distribution, post retention and failure mode of fiber post cemented to human root dentin. Ten human central upper incisors with circular root canal were selected. They were sectioned with 15 mm and were endodontically filled. The roots were scanned using micro-CT after post space preparation for root filling remaining evaluation. Fiber posts were cemented using self-adhesive resin cement (Rely X U200, 3M-ESPE). Two 1-mm-thick slices from the cervical, medium and apical thirds were scanned for resin cement bubbles volume measurements and submitted to a push-out test (PBS). Three operators using stereomicroscopy and confocal laser microscopy classified the failure mode. Stress distributions during the push-out test were analyzed using 3D finite element analysis. PBS values (MPa) were submitted to one-way ANOVA and Tukey's post hoc tests and the failure modes using the Kappa coefficient to assess inter-operator agreement. Chi-square test was used to determine significant differences between the methods ( = 0.05). Push-out bond strength was significantly affected by the bubbles presence in all root depth (p<0.05). The stress concentration was higher when the bubbles were present. Adhesive dentin/resin cement interface failure was the most frequent type of failure. Confocal microscopy was better than stereomicroscopy for failure analysis. Bubbles generated during resin cement insertion into the root canal negatively affect the stress distribution and the bond strength. The use of confocal microscopy is recommended for failure analysis.

Does MTA affect fiber post retention in repaired cervical root canal perforations?

This study evaluated the effect of mineral trioxide aggregate (MTA) on the retention of fiber posts in repaired root canal perforations. Ten-millimeter post spaces were prepared in 60 endodontically treated bovine incisors. Root perforations were created in half of the root canals in the cervical area prior to being filled with white MTA-Angelus. Fiber posts were luted into the root canals with two self-adhesive (RelyX Unicem or Set) or self-etching (Panavia F) resin cements. The posts were submitted to a pull-out test, and the data were submitted to two-way ANOVA and Tukey's post hoc tests (α = 0.05). The fiber posts exhibited reduced retention in MTA-repaired root canal perforations, regardless of the type of resin cement that was used (p < 0.001). Self-adhesive resin cements provided higher bond strength values than Panavia F, while no difference was observed between RelyX Unicem and Set (p > 0.05). The presence of MTA in repaired root perforations negatively affected post retention. In addition, self-adhesive cements seemed to be the best option to lute fiber posts within a root canal in these cases.

Effects of Internal Bleaching on the Adhesion of Glass-Fiber Posts

Objective:

We evaluated the effects of internal bleaching on the adhesion of glass-fiber posts (GFPs) luted with different resin cements.

Methods:

Forty extracted human single-root teeth were endodontically treated and divided into four groups (n=10): G1- conventional resin cement (CRC); G2- self-adhesive resin cement (SARC); G3- bleaching + CRC; and G4- bleaching + SARC. Specimens were sectioned transversally into three slices to perform the push-out test at the coronal, middle and apical regions of the root canals. Data were analyzed using analysis of variance and Tukey's test (p<0.05).

Results:

The push-out bond strength of GFPs luted with SARC after bleaching (G4) was significantly lower than that of the other groups (p<0.001). We found no statistically significant differences in push-out bond strength among the other groups.

Significance:

Internal bleaching reduced the adhesion of GFPs luted with SARC. The adhesion of GFPs luted with CRC was not decreased after bleaching.