Systematic contact-free 3D topometry of the soft tissue profile in cleft lips

Age- and Sex-Related Changes in Labial Dimensions of Sudanese Youngs of Arab Descent: A Three-Dimensional Cross-Sectional Study

Proper evaluation of facial features during growth and development requires the knowledge of anthropometric reference values validated for ethnicity, sex and age. In order to provide information concerning the normal sex-related size of the lips during childhood and young adulthood in Sudanese people of Arab descent, the three-dimensional coordinates of nine labial soft tissue landmarks were obtained by a laser scanner in 332 male and 386 female healthy Northern Sudanese subjects aged 3-30 years. Six labial linear distances, the vermilion height to mouth width ratio, vermilion areas and lip volumes were calculated and averaged for age and sex. Comparisons were performed by factorial analysis of variance (p < 0.01). All labial dimensions significantly increased with age. Significant effects of sex were found for four measurements only, with very small effect size; nonetheless, lips and their parts grew faster in females than in males at almost all ages. Philtrum width was the first linear distance that attained adult values. The vermilion height to mouth width ratio was nearly constant across the age groups. Data collected in this study contribute to information about ethnic-specific lip morphology during growth and development. As orolabial features change over time with their own pattern, the relevant age-related trends should be properly considered for clinical treatment planning.

Three-Dimensional Soft-Tissue Evaluation in Patients with Cleft Lip and Palate

BACKGROUND In cleft lip and palate (CLP) patients, the shape of the facial soft tissues shows variety in 3 dimensions (3D). Two-dimensional (2D) photographs and radiographs are insufficient in the examination of these anomalies. The aim of this retrospective study was to examine the soft tissue and craniofacial characteristics of individuals with nonsyndromic unilateral cleft lip and palate (UCLP), bilateral cleft lip and palate (BCLP), skeletal Class III malocclusions, or skeletal Class I malocclusions using 3D facial imaging. MATERIAL AND METHODS The entire study group consisted of a total of 158 patients, aged 8-32 years: 29 of the patients had UCLP, 22 BCLP, 54 had skeletal Class III malocclusions, and 53 had skeletal Class I malocclusions. 3D stereophotogrammetric soft-tissue recordings of all patients were analyzed. ANOVA and the Kruskal-Wallis test were performed to compare the groups. RESULTS Statistically significant differences were observed among the groups in terms of linear, angular, proportional. and volumetric measurements. While nasal differences were not observed in the Class III group, nose and upper-lip deformities were common in the CLP groups. Upper-lip projection was reduced in all 3 groups. In the Class III patients, the lower lip and chin were more prominent than in the other groups. The facial convexity angle was increased in the CLP and Class III groups. The upper-lip volume was decreased in the BCLP, the UCLP, and the Class III groups. CONCLUSIONS Patients with skeletal Class III or CLP anomalies showed significantly different soft-tissue characteristics than the Class I control group. 3D stereophotogrammetric facial imaging is an easy and noninvasive method that can be used in examination and recording of these facial deformities. It is possible to make volumetric measurements using this method.

Digitalized analysis of philtral anatomy for planning individual treatment

OBJECTIVE

Restoration of the philtral region following traumatic, cleft, and tumor surgeries is often difficult due to influence of this feature to whole facial beauty. The aim of this study is to investigate the types and measurements of the philtrum and its relationship with the upper lip using a software.

METHODS

Standard personal photographs of the philtral region were obtained from 200 young adults participated in this study. Linear analyses (the lengths of philtral column and dimple; the philtral width) and angular analyses (apex and central angles of Cupid's bow) were measured as reference points. As for the shape of the philtral column, it was categorized as four distinct types: parallel, triangular, concave, and unclear type.

RESULTS

The philtral width was 11.37 ± 1.9 mm in males, 10.21 ± 1.80 mm in females. The length of the philtral dimple was 18.16 ± 3.6 mm in males, 18.16 ± 3.6 mm in females. Compared with women, both of the measured average philtral reference lengths displayed a significantly greater value in men. In the meanwhile, compared to women, the angular measurements of Cupid's bow (i.e., the apex and central angle of Cupid's bow) were smaller in men. It was 127.47 ± 12.74° mm in males, 134.1 ± 11.38° mm in females. The triangular and concave types were associated with a substantial fraction in men, whereas the triangular and parallel types were predominant in women. There were significant gender differences in the esthetic rankings of philtral column shapes.

CONCLUSIONS

These results suggest digitalized reference values relative to the philtral column which may increase the success of the individual reconstructive treatment of the surgical procedures and reduce possible asymmetrical appearance. With the help of certain software, this research has made possible to investigate the ideal parameters of philtral construction in defining the best surgical solution for the patient.

Application of off-the-shelf stereo-cameras for the 3D assessment of morphometric variations caused by rhinoplasty

The present paper shows how a non-invasive and low-cost photogrammetric stereo device allows the assessment of morphometric variations of the nose following rhinoplasty. Six female patients, aged between 24 and 37 years, underwent 3D stereo-photogrammetric scanning. Three-dimensional computerised models were generated, extracting also information related to the coordinates of facial landmarks, distances between landmarks, angles, in pre- and postoperative situation. Two kinds of analysis were carried out: (i) statistical correlation between size variations and (ii) morphometric analysis, including General Procrustes Analysis (GPA), Principal Components Analysis (PCA) and Warping. The study shows the usefulness of the stereo-photogrammetric facial digitisation for morphometric analysis of the human face. Three-dimensional computerised models are also an important tool for the assessment of the surgeon's performance in the event of dispute between doctor and patient. Moreover, confirmation of the PCA as an analytical tool for the identification of components characterising the morphometric structure of the nose is highlighted.

Measuring Symmetry in Children With Unrepaired Cleft Lip: Defining a Standard for the Three-Dimensional Midfacial Reference Plane

OBJECTIVE

Quantitative measures of facial form to evaluate treatment outcomes for cleft lip (CL) are currently limited. Computer-based analysis of three-dimensional (3D) images provides an opportunity for efficient and objective analysis. The purpose of this study was to define a computer-based standard of identifying the 3D midfacial reference plane of the face in children with unrepaired cleft lip for measurement of facial symmetry.

PARTICIPANTS

The 3D images of 50 subjects (35 with unilateral CL, 10 with bilateral CL, five controls) were included in this study.

INTERVENTIONS

Five methods of defining a midfacial plane were applied to each image, including two human-based (Direct Placement, Manual Landmark) and three computer-based (Mirror, Deformation, Learning) methods.

MAIN OUTCOME MEASURE

Six blinded raters (three cleft surgeons, two craniofacial pediatricians, and one craniofacial researcher) independently ranked and rated the accuracy of the defined planes.

RESULTS

Among computer-based methods, the Deformation method performed significantly better than the others. Although human-based methods performed best, there was no significant difference compared with the Deformation method. The average correlation coefficient among raters was .4; however, it was .7 and .9 when the angular difference between planes was greater than 6° and 8°, respectively.

CONCLUSIONS

Raters can agree on the 3D midfacial reference plane in children with unrepaired CL using digital surface mesh. The Deformation method performed best among computer-based methods evaluated and can be considered a useful tool to carry out automated measurements of facial symmetry in children with unrepaired cleft lip.

Age-related and sex-related changes in the normal soft tissue profile of native Northern Sudanese subjects: a cross-sectional study

Information about age-related and sex-related normative measurements of the nasolabial region in native Northern Sudanese subjects is scanty. We have therefore used a hand-held laser scanner to measure nasolabial angles and distances, and collected the 3-dimensional coordinates of seven landmarks on the facial soft tissues from 654 healthy native Northern Sudanese subjects (327 male and 327 female, aged 4-30 years). From these we calculated five angles and two linear distances and took the mean (SD) for age and sex, and compared them using factorial analysis of variance. All measurements analysed were significantly modified by age in both sexes (p < 0.01) except for the distance from the lower lip to Ricketts' E-line. Sex had a significant effect on the mentolabial and maxillary prominence angles and both distances (p < 0.005). Nasal convexity and the interlabial angle became more obtuse with growth, while the nasolabial and mentolabial angles reduced progressively with female subjects having significantly more obtuse mentolabial angles (p < 0.001). The maxillary prominence angle progressively decreased during childhood, and increased after adolescence, with larger values in male subjects. The upper and lower lip distances from Ricketts' E-line were also significantly larger in male subjects (p < 0.003), but the difference reduced with age. Overall, there were several differences when we compared our data with published data for African and white subjects, which points to the need for ethnic-specific data. Measurements collected in the current study could be used for the quantitative description of facial morphology in native Northern Sudanese children, adolescents, and young adults.

A Pilot Study on the Influence of Facial Expression on Measurements in Three-Dimensional Digital Surfaces of the Face in Infants With Cleft Lip and Palate

OBJECTIVE

Three-dimensional surface imaging is an increasingly popular modality for face measurements in infants with cleft lip and palate. Infants are noncompliant toward producing specific facial expressions, and selecting the appropriate moment of acquisition is challenging. The objective was to estimate amount and spatial distribution of deformation of the face due to facial expression in infants with cleft lip and palate and provide recommendations for an improved acquisition protocol, including a method of quality control in terms of obtaining images with true neutral expression.

MATERIAL AND METHODS

Three-dimensional surface images of ten 4-month-old infants with unrepaired cleft lip and palate were obtained using a 3dMDface stereophotogrammetric system. For each subject, five surface images judged as representing a neutral expression were obtained during the same photo session. Mean and maximum deformations were calculated. A formalized review was performed, allowing the image exhibiting the "best" neutral expression to be selected, thus decreasing errors due to residual facial expression.

RESULTS

Deformation due to facial expression generally increased from forehead to chin. The amount of deformation in three selected regions were determined: nose (mean, 1 mm; maximum = 3 mm); cleft region (mean, 2 mm; maximum = 5 mm); chin region (mean, 5 mm; maximum = 12 mm). Analysis indicated that introduction of a formalized review of images could reduce these errors by a factor of 2.

CONCLUSIONS

The continuous change of facial expression in infants represents a substantial source of error; however, this may be reduced by incorporating a formalized review into the acquisition protocol.

Reliability of nasolabial anthropometric measures using three-dimensional stereophotogrammetry in infants with unrepaired unilateral cleft lip

BACKGROUND

Surgical and orthodontic treatment of unilateral cleft lip +/- palate can produce dramatic changes in nasolabial form; however, the lack of ideal methods with which to objectively document three-dimensional form limits the ability to assess treatment outcomes. The purpose of this study was to determine the reliability of three-dimensional stereophotogrammetry for anthropometric assessment of the unilateral cleft lip +/- palate deformity in infants before cleft lip repair.

METHODS

Preoperative three-dimensional images were acquired from 26 consecutive patients with unrepaired unilateral cleft lip +/- palate. Three raters performed indirect anthropometry on each image on two separate occasions, with at least 1 week between rating sessions. One rater performed direct measurements on participants before surgery while in the operating room. Twenty-six linear and angular measurements were considered, and intrarater, interrater, and intermethod reliability were assessed.

RESULTS

Regarding intrarater and interrater reliability, most measurements had Pearson coefficients greater than 0.75, mean differences less than 0.8 mm, and mean proportional differences less than 0.1. For measurements involving vermilion height, nostril remnants, or Cupid's bow width, Pearson coefficients ranged from 0.3 to 0.75, mean differences ranged from 0.4 to 0.9 mm, and mean proportional differences ranged from 0.1 to 0.3. Regarding intermethod reliability, correlation coefficients ranged from 0.4 to 0.75 for most measurements. The mean differences for nose and lip measurements were less than 1 mm and between 0.8 and 1.3 mm, respectively.

CONCLUSION

Three-dimensional stereophotogrammetry provides a reliable method for many anthropometric measurements of nasolabial form in infants with unrepaired unilateral cleft lip +/- palate.

CLINICAL QUESTION/LEVEL OF EVIDENCE

Diagnostic, II.

Three-dimensional imaging methods for quantitative analysis of facial soft tissues and skeletal morphology in patients with orofacial clefts: a systematic review

Background

Current guidelines for evaluating cleft palate treatments are mostly based on two-dimensional (2D) evaluation, but three-dimensional (3D) imaging methods to assess treatment outcome are steadily rising.

Objective

To identify 3D imaging methods for quantitative assessment of soft tissue and skeletal morphology in patients with cleft lip and palate.

Data sources

Literature was searched using PubMed (1948–2012), EMBASE (1980–2012), Scopus (2004–2012), Web of Science (1945–2012), and the Cochrane Library. The last search was performed September 30, 2012. Reference lists were hand searched for potentially eligible studies. There was no language restriction.

Study selection

We included publications using 3D imaging techniques to assess facial soft tissue or skeletal morphology in patients older than 5 years with a cleft lip with/or without cleft palate. We reviewed studies involving the facial region when at least 10 subjects in the sample size had at least one cleft type. Only primary publications were included.

Data extraction

Independent extraction of data and quality assessments were performed by two observers.

Results

Five hundred full text publications were retrieved, 144 met the inclusion criteria, with 63 high quality studies. There were differences in study designs, topics studied, patient characteristics, and success measurements; therefore, only a systematic review could be conducted. Main 3D-techniques that are used in cleft lip and palate patients are CT, CBCT, MRI, stereophotogrammetry, and laser surface scanning. These techniques are mainly used for soft tissue analysis, evaluation of bone grafting, and changes in the craniofacial skeleton. Digital dental casts are used to evaluate treatment and changes over time.

Conclusion

Available evidence implies that 3D imaging methods can be used for documentation of CLP patients. No data are available yet showing that 3D methods are more informative than conventional 2D methods. Further research is warranted to elucidate it.

Systematic review registration

International Prospective Register of Systematic Reviews, PROSPERO CRD42012002041

Three-dimensional facial distances of Northern Sudanese persons from childhood to young adulthood

No current age- and gender-related normative data exist for the dimensions of facial structures in Northern Sudanese subjects. In the current study information about normal sex- and age-related linear distances is provided. The three-dimensional coordinates of 14 landmarks on the facial soft tissues were obtained using a hand-held laser scanner in 653 healthy Northern Sudanese subjects (326 males and 327 females) aged 4-30 years. From the landmarks, 13 linear distances were calculated, and averaged for age and sex. Comparisons were performed by factorial analysis of variance. All analyzed linear soft tissue facial dimensions were significantly larger in men than in women (p < 0.01), except mouth width (ch-ch), upper facial height (n-sn), mandibular body length (pg-go) and width (go-go). All measurements underwent significant modifications as a function of age (p < 0.01), with significant age × sex interactions (p < 0.01) for all linear dimensions except lower face height (sn-pg). Overall, when compared to literature data for African and Caucasoid subjects, several differences were found, pointing to the necessity of ethnic-specific data. Data collected in the present investigation could serve as a database for the quantitative description of human facial morphology during normal growth and development.

Evaluation of precision and accuracy assessment of different 3-D surface imaging systems for biomedical purposes

Three-dimensional (3-D) surface imaging has gained clinical acceptance, especially in the field of cranio-maxillo-facial and plastic, reconstructive, and aesthetic surgery. Six scanners based on different scanning principles (Minolta Vivid 910®, Polhemus FastSCAN™, GFM PRIMOS®, GFM TopoCAM®, Steinbichler Comet® Vario Zoom 250, 3dMD DSP 400®) were used to measure five sheep skulls of different sizes. In three areas with varying anatomical complexity (areas, 1 = high; 2 = moderate; 3 = low), 56 distances between 20 landmarks are defined on each skull. Manual measurement (MM), coordinate machine measurements (CMM) and computer tomography (CT) measurements were used to define a reference method for further precision and accuracy evaluation of different 3-D scanning systems. MM showed high correlation to CMM and CT measurements (both r = 0.987; p < 0.001) and served as the reference method. TopoCAM®, Comet® and Vivid 910® showed highest measurement precision over all areas of complexity; Vivid 910®, the Comet® and the DSP 400® demonstrated highest accuracy over all areas with Vivid 910® being most accurate in areas 1 and 3, and the DSP 400® most accurate in area 2. In accordance to the measured distance length, most 3-D devices present higher measurement precision and accuracy for large distances and lower degrees of precision and accuracy for short distances. In general, higher degrees of complexity are associated with lower 3-D assessment accuracy, suggesting that for optimal results, different types of scanners should be applied to specific clinical applications and medical problems according to their special construction designs and characteristics.

The morphological features and developmental changes of the philtral dimple: a guide to surgical intervention in cases of cleft lip

OBJECTIVE

This study was undertaken to analyse in detail the morphological features of the philtral dimple and the developmental changes of philtral morphology, including a comparison with patients with a cleft lip.

PATIENTS AND PARTICIPANTS

Fifty-five normal Japanese adults, seventy-five children and fifteen patients with complete unilateral cleft lip were referred for analysis.

DESIGN

3D facial data were acquired with a non-contacting laser scanner. We calculated the desired linear and angular components, defining the features of the philtrum with analysing software.

RESULTS

The philtral dimple was morphologically expressed by the two different deepest points in the horizontal and sagittal sectional view, respectively. These decreased with age and did not show any correlation. In contrast, philtral measurements on the X-Y coordinates increased during the course of development. Most of the linear and angular variables in the patients with the cleft lip had exhibited greater values than the normal subjects, reflecting the deformed philtral morphology.

CONCLUSIONS

To obtain an optimally natural philtral construction accompanied by a symmetrical lip in cleft surgery, it is critical to take into consideration both the geometric features of the philtral depth and age-appropriate morphological features of the philtrum as objective criteria.