Urban structures provide new insights into interactions among grazers and habitat

Variable effects of substrate colour and microtexture on sessile marine taxa in Australian estuaries

Concrete infrastructure in coastal waters is increasing. While adding complex habitat and manipulating concrete mixtures to enhance biodiversity have been studied, field investigations of sub-millimetre-scale complexity and substrate colour are lacking. Here, the interacting effects of 'colour' (white, grey, black) and 'microtexture' (smooth, 0.5 mm texture) on colonisation were assessed at three sites in Australia. In Townsville, no effects of colour or microtexture were observed. In Sydney, spirorbid polychaetes occupied more space on smooth than textured tiles, but there was no effect of microtexture on serpulid polychaetes, bryozoans and algae. In Melbourne, barnacles were more abundant on black than white tiles, while serpulid polychaetes showed opposite patterns and ascidians did not vary with treatments. These results suggest that microtexture and colour can facilitate colonisation of some taxa. The context-dependency of the results shows that inclusion of these factors into marine infrastructure designs needs to be carefully considered.

Predicting the impact of sea-level rise on intertidal rocky shores with remote sensing

Sea-level rise is an inevitable consequence of climate change and threatens coastal ecosystems, particularly intertidal habitats that are constrained by landward development. Intertidal habitats support significant biodiversity, but also provide natural buffers from climate-threats such as increased storm events. Predicting the effects of climate scenarios on coastal ecosystems is important for understanding both the degree of habitat loss for associated ecological communities and the risk of the loss of coastal buffer zones. We take a novel approach by combining remote sensing with the IUCN Red List of Ecosystem criteria to assess this impact. We quantified the extent of horizontal intertidal rocky shores along ~200 km of coastline in Eastern Australia using GIS and remote-sensing (LiDAR) and used this information to predict changes in extent under four different climate change driven sea-level rise scenarios. We then applied the IUCN Red List of Ecosystems Criterion C2 (habitat degradation over the next 50 years based on change in an abiotic variable) to estimate the status of this ecosystem using the Hawkesbury Shelf Marine Bioregion as a test coastline. We also used four individual rocky shores as case studies to investigate the role of local topography in determining the severity of sea-level rise impacts. We found that, if the habitat loss within the study area is representative of the entire bioregion, the IUCN status of this ecosystem is 'near threatened', assuming that an assessment of the other criteria would return lower categories of risk. There was, however, high spatial variability in this effect. Rocky shores with gentle slopes had the highest projected losses of area whereas rocky shores expanding above the current intertidal range were less affected. Among the sites surveyed in detail, the ecosystem status ranged from 'least concern' to 'vulnerable', but reached 'endangered' under upper estimates of the most severe scenario. Our results have important implications for conservation management, highlighting a new link between remote sensing and the IUCN Red List of Ecosystem criteria that can be applied worldwide to assess ecosystem risk to sea-level rise.

Mapping microhabitat thermal patterns in artificial breakwaters: Alteration of intertidal biodiversity by higher rock temperature

Urbanization is altering community structure and functioning in marine ecosystems, but knowledge about the mechanisms driving loss of species diversity is still limited. Here, we examine rock thermal patterns in artificial breakwaters and test whether they have higher and spatially less variable rock temperature than natural adjacent habitats, which corresponds with lower biodiversity patterns. We estimated rock temperatures at mid-high intertidal using infrared thermography during mid-day in summer, in both artificial (Rip-raps) and natural (boulder fields) habitats. We also conducted diurnal thermal surveys (every 4 hr) in four seasons at one study site. Concurrent sampling of air and seawater temperature, wind velocity, and topographic structure of habitats were considered to explore their influence on rock temperature. Rock temperature was in average 3.7°C higher in the artificial breakwater in two of the three study sites, while air temperature was about 1.5-4°C higher at this habitat at summer. Thermal patterns were more homogeneous across the artificial habitat. Lower species abundance and richness in the artificial breakwaters were associated with higher rock temperature. Mechanism underlying enhanced substrate temperature in the artificial structures seems related to their lower small-scale spatial heterogeneity. Our study thus highlighted that higher rock temperature in artificial breakwaters can contribute to loss of biodiversity and that integrated artificial structures may alter coastal urban microclimates, a matter that should be considered in the spatial planning of urban coastal ecosystems.

A Decision Framework for Coastal Infrastructure to Optimize Biotic Resistance and Resilience in a Changing Climate

Coastal ecosystems are under growing pressure from human activities such as pollution and climate change. Although the rapidly growing numbers of humans living in coastal areas is a large part of the problem, there is great opportunity to improve the resistance and resilience of biotic communities via creative changes to the engineering design of built infrastructure. Here, we apply ecological theories to create a framework for adaptive building in marine systems that can be applied by managers worldwide. We explain how climate effects could be mitigated across different spatial scales with both physical and biological interventions. This requires an approach based on ecological theory that incorporates our understanding of how systems withstand (resistance) or recover (resilience) from impacts and takes into account future local and global environmental conditions. By translating ecological theory into practical application, we propose a framework for the choice and design of coastal infrastructure that can underpin effective, forward-looking conservation strategies.

Artificial structures alter kelp functioning across an urbanised estuary

Assessments of human impacts on natural habitats often focus on the abundance of component species, yet physiological and/or sub-lethal effects of stressors on functional attributes may be equally important to consider. Here we evaluated how artificial structures, an integral part of urbanisation in the marine environment, affects key functional properties of the habitat-forming kelp Ecklonia radiata. Given that stressors rarely occur in isolation, we assessed the effects of infrastructure across an urbanised estuary. Estuaries are ideal for studying how multiple anthropogenic and natural stressors influence potential impacts of infrastructure on habitat-forming species because these habitats usually face a wide range and levels of stressors. Here, we compared the abundance of habitat-forming macro-algae as well as the growth, erosion and photosynthetic activity of kelp in artificial and natural habitats across one of the largest urbanised estuaries in the word - Sydney Harbour. We predicted that effects of artificial structures on functional attributes of kelps would be stronger in the inner area of the Harbour, characterised by higher levels of human impacts and low flushing. Contrary to our predictions, we found that effects of infrastructure were consistent across the estuary, regardless of the ecological footprint caused by human activities or natural environmental gradients. When differences were observed between areas of the estuary, they mostly occurred independently of impacts of substrate type. Importantly, we found lower erosion rates of kelp on pilings than on reefs, likely resulting in lower production of detritus in estuaries where natural reefs are degraded or lost and pilings added. Such impacts have important implications for the connectivity among coastal habitats and secondary productivity in adjacent and remote habitats, which are highly dependent on the exportation of kelp detritus. Our study is the first to assess potential functional consequences of urbanisation through physiological and/or biomechanical effects on habitat-formers, an often overlooked mechanism of environmental impact on ecosystem functioning.

Heterogeneity of ecological patterns, processes, and funding of marine manipulative field experiments conducted in Southeastern Pacific coastal ecosystems

Ecological manipulative experiments conducted in marine coastal ecosystems have substantially improved ecological theory during the last decades and have provided useful knowledge for the management and conservation of coastal ecosystems. Although different studies report global trends in ecological patterns worldwide, Southeastern Pacific coastal ecosystems have been poorly considered. Given that the SE Pacific coast encompasses diverse coastal ecosystems, consideration of studies conducted along this range can shed light on the heterogeneity of processes regulating coastal communities. We reviewed the biotic interactions and habitat type considered, as well as the complexity in terms of spatial and temporal extent of manipulative field experimental studies conducted along the SE Pacific coast from 0°S to 56°S (Ecuador to Chile). We test the effect of funding reported by different studies as a main factor limiting experimental complexity. From field ecological studies published from 1970 to 2016, we found that 81 studies were truly manipulative, in which one or multiple factors were "manipulated." Around 77% of these studies were located between 21°S and 40°S, and conducted in intertidal rocky habitats. An increase in experimental studies was observed between 2010 and 2015, especially focused on herbivore-alga interactions, although we found that both the temporal extent and spatial extent of these studies have shown a decrease in recent decades. Funding grant amount reported had a positive effect on elapsed time of field experiments, but no effect was observed on spatial extent or in the biotic interactions considered. Elapsed time of experiments was different among the main biotic interactions considered, that is, herbivory, predation, and competition. We suggest that to further progress in applied ecological knowledge, it will be necessary to consider pollution and urbanization processes explicitly using a field experimental framework. This information could improve our understanding of how ecosystems present along the SE Pacific coast respond to climate change and increased levels of human interventions.

Coastal urbanisation affects microbial communities on a dominant marine holobiont

Host-associated microbial communities play a fundamental role in the life of eukaryotic hosts. It is increasingly argued that hosts and their microbiota must be studied together as 'holobionts' to better understand the effects of environmental stressors on host functioning. Disruptions of host–microbiota interactions by environmental stressors can negatively affect host performance and survival. Substantial ecological impacts are likely when the affected hosts are habitat-forming species (e.g., trees, kelps) that underpin local biodiversity. In marine systems, coastal urbanisation via the addition of artificial structures is a major source of stress to habitat formers, but its effect on their associated microbial communities is unknown. We characterised kelp-associated microbial communities in two of the most common and abundant artificial structures in Sydney Harbour—pier-pilings and seawalls—and in neighbouring natural rocky reefs. The kelp Ecklonia radiata is the dominant habitat-forming species along 8000 km of the temperate Australian coast. Kelp-associated microbial communities on pilings differed significantly from those on seawalls and natural rocky reefs, possibly due to differences in abiotic (e.g., shade) and biotic (e.g., grazing) factors between habitats. Many bacteria that were more abundant on kelp on pilings belonged to taxa often associated with macroalgal diseases, including tissue bleaching in Ecklonia. There were, however, no differences in kelp photosynthetic capacity between habitats. The observed differences in microbial communities may have negative effects on the host by promoting fouling by macroorganisms or by causing and spreading disease over time. This study demonstrates that urbanisation can alter the microbiota of key habitat-forming species with potential ecological consequences.

Artificial structures in the marine coastal environment, such as piers and seawalls can alter microbial interactions with seaweed hosts. Researchers in Australia, led by Ezequiel Marzinelli at the University of New South Wales, studied the microbial communities growing on kelps in Sydney Harbour. They compared this altered environment with neighbouring natural rocky reefs. The work illustrates the “holobiont” concept, which treats communities of microbes and hosts as holistic entities. Significant findings included an increase in microbes associated with algal diseases in pier piling structures. This study shows that urbanisation of the coastal environment can have ecological consequences on major habitat-forming species such as kelp. The researchers argue that the combination of abiotic factors, such as shade, and biotic factors, such as altered grazing patterns, might be involved.

Habitat formation prevails over predation in influencing fouling communities

Coastal human‐made structures, such as marinas and harbors, are expanding worldwide. Species assemblages described from these artificial habitats are novel relative to natural reefs, particularly in terms of the abundance of nonindigenous species (NIS). Although these fouling assemblages are clearly distinctive, the ecosystem functioning and species interactions taking place there are little understood. For instance, large predators may influence the fouling community development either directly (feeding on sessile fauna) or indirectly (feeding on small predators associated with these assemblages). In addition, by providing refuges, habitat complexity may modify the outcome of species interactions and the extent of biotic resistance (e.g., by increasing the abundance of niche‐specific competitors and predators of NIS). Using experimental settlement panels deployed in the field for 2.5 months, we tested the influence of predation (i.e., caging experiment), artificial structural complexity (i.e., mimics of turf‐forming species), and their interactions (i.e., refuge effects) on the development of sessile and mobile fauna in two marinas. In addition, we tested the role of biotic complexity—arising from the habitat‐forming species that grew on the panels during the trial—on the richness and abundance of mobile fauna. The effect of predation and artificial habitat complexity was negligible, regardless of assemblage status (i.e., native, cryptogenic, and nonindigenous). Conversely, habitat‐forming species and associated epibionts, responsible for biotic complexity, had a significant effect on mobile invertebrates (richness, abundance, and community structure). In particular, the richness and abundance of mobile NIS were positively affected by biotic complexity, with site‐dependent relationships. Altogether, our results indicate that biotic complexity prevails over artificial habitat complexity in determining the distribution of mobile species under low predation pressure. Facilitation of native and non‐native species thus seems to act upon diversity and community development: This process deserves further consideration in models of biotic resistance to invasion in urban marine habitats.

Spatial variability in community composition on a granite breakwater versus natural rocky shores: lack of microhabitats suppresses intertidal biodiversity

Strong differences have been observed between the assemblages on artificial reefs and on natural hard-bottom habitats worldwide, but little is known about the mechanisms that cause contrasting biodiversity patterns. We examined the influence of spatial attributes in relation to both biogenic and topographic microhabitats, in the distribution and composition of intertidal species on both artificial and natural reefs. We found higher small-scale spatial heterogeneity on the natural reef compared with the study breakwater. Species richness and diversity were associated with a higher availability of crevices, rock pools and mussels in natural habitats. Spatial distribution of certain grazers corresponded well with the spatial structure of microhabitats. In contrast, the lack of microhabitats on the breakwater resulted in the absence of several grazers reflected in lower species richness. Biogenic and topographic microhabitats can have interactive effects providing niche opportunities for multiple species, explaining differences in species diversity between artificial versus natural reefs.

Invasion success and development of benthic assemblages: effect of timing, duration of submersion and substrate type

Several studies have suggested that communities associated with artificial substrata support more non-indigenous species (NIS) than natural habitats, and may function as corridors for their expansion. Our study focused on the role of substrate type, timing and duration of submersion as determinants of fouling assemblage. We used plates made of basalt, concrete or fibreglass, to assess early, i.e., 3 months, and late, i.e., 12 months, succession in benthic communities. To assess spatial and temporal variability of the results, sampling was performed at 2 locations and the experiment was repeated in two seasons of the year. Our results showed that the timing and duration of submersion affected the number and percent cover of natives and NIS, as well as assemblage composition. Moreover, the present study showed no support for the hypothesis that marine NIS are more abundant on artificial substrata, as neither of the two artificial substrata tested supported a greater number of NIS compared to basalt (the natural substratum). Overall, fibreglass presented the most different benthic assemblage composition, supporting the fact that the extent and nature of the observed differences varied not only between natural and artificial substrata, but also according to the type of artificial habitat considered. Thus, our results are in agreement with previous studies that stated that appropriate strategies for environmental management should integrate ecological assessment in order to maintain natural patterns of distribution and abundance of organisms, scales of variability and relevant ecological processes.

Ecologically informed engineering reduces loss of intertidal biodiversity on artificial shorelines

Worldwide responses to urbanization, expanding populations and climatic change mean biodiverse habitats are replaced with expensive, but necessary infrastructure. Coastal cities support vast expanses of buildings and roads along the coast or on "reclaimed" land, leading to "armouring" of shorelines with walls, revetments and offshore structures to reduce erosion and flooding. Currently infrastructure is designed to meet engineering and financial criteria, without considering its value as habitat, despite artificial shorelines causing loss of intertidal species and altering ecological natural processes that sustain natural biodiversity. Most research on ameliorating these impacts focus on soft-sediment habitats and larger flora (e.g., restoring marshes, encouraging plants to grow on walls). In response to needs for greater collaboration between ecologists and engineers to create infrastructure to better support biodiversity, we show how such collaborations lead to small-scale and inexpensive ecologically informed engineering which reduces loss of species of algae and animals from rocky shores replaced by walls. Adding experimental novel habitats to walls mimicking rock-pools (e.g., cavities, attaching flowerpots) increased numbers of species by 110% within months, in particular mobile animals most affected by replacing natural shores with walls. These advances provide new insights about melding engineering and ecological knowledge to sustain biodiversity in cities.