Biological Evaluation of Chitosan Nanofiber Membrane for Guided Bone Regeneration

Biocomposite Scaffolds Based on Chitosan Extraction from Shrimp Shell Waste for Cartilage Tissue Engineering Application

Chitosan-based scaffolding possesses unique properties that make it highly suitable for tissue engineering applications. Chitosan is derived from deacetylating chitin, which is particularly abundant in the shells of crustaceans. This study aimed to extract chitosan from shrimp shell waste (Macrobrachium rosenbergii) and produce biocomposite scaffolds using the extracted chitosan for cartilage tissue engineering applications. Chitinous material from shrimp shell waste was deproteinized and deacetylated. The extracted chitosan was characterized and compared to commercial chitosan through various physicochemical analyses. The findings revealed that the extracted chitosan shares similar trends in the Fourier transform infrared spectroscopy spectrum, energy dispersive X-ray mapping, and X-ray diffraction pattern to commercial chitosan. Despite differences in the degree of deacetylation, these results underscore its comparable quality. The extracted chitosan was mixed with agarose, collagen, and gelatin to produce the blending biocomposite AG-CH-COL-GEL scaffold by freeze-drying method. Results showed AG-CH-COL-GEL scaffolds have a 3D interconnected porous structure with pore size 88-278 μm, high water uptake capacity (>90%), and degradation percentages in 21 days between 5.08% and 30.29%. Mechanical compression testing revealed that the elastic modulus of AG-CH-COL-GEL scaffolds ranged from 44.91 to 201.77 KPa. Moreover, AG-CH-COL-GEL scaffolds have shown significant potential in effectively inducing human chondrocyte proliferation and enhancing aggrecan gene expression. In conclusion, AG-CH-COL-GEL scaffolds emerge as promising candidates for cartilage tissue engineering with their optimal physical properties and excellent biocompatibility. This study highlights the potential of using waste-derived chitosan and opens new avenues for sustainable and effective tissue engineering solutions.

Aspirin-Loaded Anti-Inflammatory ZnO-SiO2 Aerogel Scaffolds for Bone Regeneration

The increasing aging of the population has elevated bone defects to a significant threat to human life and health. Aerogel, a biomimetic material similar to an extracellular matrix (ECM), is considered an effective material for the treatment of bone defects. However, most aerogel scaffolds suffer from immune rejection and poor anti-inflammatory properties and are not well suited for human bone growth. In this study, we used electrospinning to prepare flexible ZnO-SiO2 nanofibers with different zinc concentrations and further assembled them into three-dimensional composite aerogel scaffolds. The prepared scaffolds exhibited an ordered pore structure, and chitosan (CS) was utilized as a cross-linking agent with aspirin (ASA). Interestingly, the 1%ZnO-SiO2/CS@ASA scaffolds not only exhibited good biocompatibility, bioactivity, anti-inflammation, and better mechanical properties but also significantly promoted vascularization and osteoblast differentiation in vitro. In the mouse cranial defect model, the BV/TV data showed a higher osteogenesis rate in the 1%ZnO-SiO2/CS group (10.94 ± 0.68%) and the 1%ZnO-SiO2/CS@ASA group (22.76 ± 1.83%), compared with the control group (5.59 ± 2.08%), and in vivo studies confirmed the ability of 1%ZnO-SiO2/CS@ASA to promote in situ regeneration of new bone. This may be attributed to the fact that Si4+, Zn2+, and ASA released from 1%ZnO-SiO2/CS@ASA scaffolds can promote angiogenesis and bone formation by stimulating the interaction between endothelial cells (ECs) and BMSCs, as well as inducing macrophage differentiation to the M2 type and downregulating the expression of pro-inflammatory factor (TNF-α) to modulate local inflammatory response. These exciting results and evidence suggest that it provides a new and effective strategy for the treatment of bone defects.

Membrane barriers for guided bone regeneration: An overview of available biomaterials

Dental implants revolutionized the treatment options for restoring form, function, and esthetics when one or more teeth are missing. At sites of insufficient bone, guided bone regeneration (GBR) is performed either prior to or in conjunction with implant placement to achieve a three-dimensional prosthetic-driven implant position. To date, GBR is well documented, widely used, and constitutes a predictable and successful approach for lateral and vertical bone augmentation of atrophic ridges. Evidence suggests that the use of barrier membranes maintains the major biological principles of GBR. Since the material used to construct barrier membranes ultimately dictates its characteristics and its ability to maintain the biological principles of GBR, several materials have been used over time. This review, summarizes the evolution of barrier membranes, focusing on the characteristics, advantages, and disadvantages of available occlusive barrier membranes and presents results of updated meta-analyses focusing on the effects of these membranes on the overall outcome.

Nano-Based Drug Delivery Systems for Periodontal Tissue Regeneration

Periodontitis is a dysbiotic biofilm-induced and host-mediated inflammatory disease of tooth supporting tissues that leads to progressive destruction of periodontal ligament and alveolar bone, thereby resulting in gingival recession, deep periodontal pockets, tooth mobility and exfoliation, and aesthetically and functionally compromised dentition. Due to the improved biopharmaceutical and pharmacokinetic properties and targeted and controlled drug release, nano-based drug delivery systems have emerged as a promising strategy for the treatment of periodontal defects, allowing for increased efficacy and safety in controlling local inflammation, establishing a regenerative microenvironment, and regaining bone and attachments. This review provides an overview of nano-based drug delivery systems and illustrates their practical applications, future prospects, and limitations in the field of periodontal tissue regeneration.

Solution blow spinning of highly deacetylated chitosan nanofiber scaffolds for dermal wound healing

Biocompatible fibrous scaffolds based on highly deacetylated chitosan were fabricated using high-throughput solution blow spinning. Scanning electron microscopy analysis revealed that the chitosan nanofiber scaffolds had ultrafine and continuous fibers (300-1200 nm) with highly interconnected porous structures (30-75% porosity), mimicking some aspects of the native extracellular matrix in skin tissue. Post-treatment of as-spun nanofibers with aqueous potassium carbonate solution resulted in a fibrous scaffold with a high chitosan content that retained its fibrous structural integrity for cell culture. Analysis of the mechanical properties of the chitosan nanofiber scaffolds in both dry and wet conditions showed that their strength and durability were sufficient for wound dressing applications. Significantly, the wet scaffold underwent remarkable elastic deformation during stretch such that the elongation at break dramatically increased to up to 44% of its original length, showing wavy fiber morphology near the break site. The culture of normal human dermal fibroblast cells onto scaffolds for 1-14 days demonstrated that the scaffolds were highly compatible and a suitable platform for cell adhesion, viability, and proliferation. Secretion profiles of wound healing-related proteins to the cell culture medium demonstrated that chitosan fibers were a promising scaffold for wound healing applications. Overall, the dense fibrous network with high porosity of the chitosan nanofiber scaffold and their mechanical properties indicate that they could be used to design and fabricate new materials that mimic the epidermis layer of natural skin.

Design and development of biomimetic electrospun sulphonated polyether ether ketone nanofibrous scaffold for bone tissue regeneration applications: in vitro and in vivo study

Bone defect restoration remains challenging in orthopedic medical practices. In this study an attempt is carried out to probe the use of new biomimetic SPEEK (sulfonated polyether ether ketone) based nanofibrous scaffold to deliver amine functionalized hydroxyapatite nanoparticles loaded resveratrol for its potent functionality in osteogenic differentiation. SPEEK polymer with reactive functional group SO₃H was synthesized through process of sulphonation reaction. Amine functionalized nanoparticles with protonated amino groups revamp the molecular interaction by the formation of hydrogen bonds that in turn intensify the bioactivity of the nanofibrous scaffold. Osteoconductive functionalized nanohydroxyapatite enhances the cell proliferation and osteogenicity with improved cell attachment and spreading. The results of FT-IR, XRD, Carbon-Silica NMR and EDX analysis confirmed the amine functionalization of the hydroxyapatite nanoparticles. Surface morphological analysis of the fabricated nanofibers through SEM and AFM analysis shows vastly interconnected porous structure that mimics the bone extracellular matrix, which enhances the cell compatibility. Cell adhesion and live dead assay of the nanoscaffolds express less cytotoxicity. Mineralization and alkaline phosphatase assay establish the osteogenic differentiation of the nanofibrous scaffold. The in vitro biocompatibility studies reveal that the fabricated scaffold was osteo-compatible with MG63 cell lines. Hemocompatibility study further proved that the designed biomimetic nanofibrous scaffold was highly suitable for bone tissue engineering. The results of in vivo analysis in zebrafish model for the fabricated nanofibers demonstrated significant increase in the caudal fin regeneration indicating mineralization of osteoblast. Thus, the commending results obtained instigate the potentiality of the composite nanofibrous scaffold as an effective biomimetic substrate for bone tissue regeneration.

Design and Fabrication of Nanofibrous Dura Mater with Antifibrosis and Neuroprotection Effects on SH-SY5Y Cells

The development and treatment of some diseases, such as large-area cerebral infarction, cerebral hemorrhage, brain tumor, and craniocerebral trauma, which may involve the injury of the dura mater, elicit the need to repair this membrane by dural grafts. However, common dural grafts tend to result in dural adhesions and scar tissue and have no further neuroprotective effects. In order to reduce or avoid the complications of dural repair, we used PLGA, tetramethylpyrazine, and chitosan as raw materials to prepare a nanofibrous dura mater (NDM) with excellent biocompatibility and adequate mechanical characteristics, which can play a neuroprotective role and have an antifibrotic effect. We fabricated PLGA NDM by electrospinning, and then chitosan was grafted on the nanofibrous dura mater by the EDC-NHS cross-linking method to obtain PLGA/CS NDM. Then, we also prepared PLGA/TMP/CS NDM by coaxial electrospinning. Our study shows that the PLGA/TMP/CS NDM can inhibit the excessive proliferation of fibroblasts, as well as provide a sustained protective effect on the SH-SY5Y cells treated with oxygen–glucose deprivation/reperfusion (OGD/R). In conclusion, our study may provide a new alternative to dural grafts in undesirable cases of dural injuries.

Chitosan-Based Biomaterial Scaffolds for the Repair of Infected Bone Defects

The treatment of infected bone defects includes infection control and repair of the bone defect. The development of biomaterials with anti-infection and osteogenic ability provides a promising strategy for the repair of infected bone defects. Owing to its antibacterial properties, chitosan (an emerging natural polymer) has been widely studied in bone tissue engineering. Moreover, it has been shown that chitosan promotes the adhesion and proliferation of osteoblast-related cells, and can serve as an ideal carrier for bone-promoting substances. In this review, the specific molecular mechanisms underlying the antibacterial effects of chitosan and its ability to promote bone repair are discussed. Furthermore, the properties of several kinds of functionalized chitosan are analyzed and compared with those of pure chitosan. The latest research on the combination of chitosan with different types of functionalized materials and biomolecules for the treatment of infected bone defects is also summarized. Finally, the current shortcomings of chitosan-based biomaterials for the treatment of infected bone defects and future research directions are discussed. This review provides a theoretical basis and advanced design strategies for the use of chitosan-based biomaterials in the treatment of infected bone defects.

The Effect of the PVA/Chitosan/Citric Acid Ratio on the Hydrophilicity of Electrospun Nanofiber Meshes

In this study, scaffolds were prepared via an electrospinning method for application in oral cavities. The hydrophilicity of the fiber mesh is of paramount importance, as it promotes cell spreading; however, the most commonly used polyvinyl alcohol (PVA) and other hydrophilic fiber meshes immediately disintegrate in aqueous media. In contrast, the excessive hydrophobicity of the scaffolds already inhibits cells adhesion on the surface. Therefore, the hydrophilicity of the fiber meshes needed to be optimized. Scaffolds with different polyvinyl alcohol (PVA)/chitosan/citric acid ratios were prepared. The addition of chitosan and the heat initiated cross-linkage of the polymers via citric acid enhanced the scaffolds' hydrophobicity. The optimization of this property could be followed by contact angle measurements, and the increased number of cross-linkages were also supported by IR spectroscopy results. The fibers' physical parameters were monitored via low-vacuum scanning electron microscopy (SEM) and atomic force microscopy (AFM). As biocompatibility is essential for dental applications, Alamar Blue assay was used to prove that meshes do not have any negative effects on dental pulp stem cells. Our results showed that the optimization of the fiber nets was successful, as they will not disintegrate in intraoral cavities during dental applications.

Preparation and characterization of polyurethane/chitosan/CNT nanofibrous scaffold for cardiac tissue engineering

Myocardial infarction of cardiomyocytes is a leading cause of heart failure (HF) worldwide. Since heart has very limited regeneration capacity, cardiac tissue engineering (TE) to produce a bioactive scaffold is considered. In this study, a series of polyurethane solutions (5-7%wt) in aqueous acetic acid were prepared using electrospinning. A variety of Polyurethane (PU)/Chitosan (Cs)/carbon nanotubes (CNT) composite nanofibrous scaffolds with random and aligned orientation were fabricated to structurally mimic the extracellular matrix (ECM). Electrospun nanofibers were then characterized using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), water contact angle, degradation studies, tensile tests, electrical resistance measurement and cell viability assay. The biocompatibility of electrospun random and aligned nanofibrous scaffolds with H9C2 Cells was confirmed. The results revealed that fabricated PU/Cs/CNT composite nanofibrous scaffolds were electro-conductive and aligned nanofibers could be considered as promising scaffolds with nano-scale features for regeneration of infarcted myocardium.

Accelerated Bone Regeneration by MOF Modified Multifunctional Membranes through Enhancement of Osteogenic and Angiogenic Performance

Owing to the insufficient guidance of new bone formation in orthopedic and craniomaxillofacial surgery, construction of a guided bone regeneration membrane to support vascularized bone regeneration remains a challenge. Herein, an electrospun asymmetric double-layer polycaprolactone/collagen (PCL/Col) membrane modified by metal-organic framework (MOF) crystals is developed. The optimization of the PCL/Col weight ratio (1:1 and 1:1.5) enables the composite membrane with a balanced tensile strength (only fell by 49.9% in wet conditions) and a controlled degradation rate (completely degraded at 12 weeks). The MOF crystals can provide a pH-responsive release of Zn²⁺ ions. In vitro experiments indicate that the barrier layer functions to prevent the infiltration of fibrous connective tissue. The MOF crystal layer functions to enhance osteogenesis and angiogenesis in vitro. Using a rat calvarial defect model, the MOF crystals exhibit a sign of osteoinductivity along with blood vessel formation after 8 weeks post-surgery. Strikingly, when assessed in a chick chorioallantoic membrane model, the MOF modified membrane demonstrates a significant angiogenic response, which can be envisaged as its outstanding merits over the commercially Col membrane. Therefore, the MOF crystals represent an exciting biomaterial option, with neovascularization capacity for bone tissue engineering and regenerative medicine.

Electrospun polyamide-6/chitosan nanofibers reinforced nano-hydroxyapatite/polyamide-6 composite bilayered membranes for guided bone regeneration

Periodontal defect poses a significant challenge in orthopedics. Guided Bone Regeneration (GBR) membrane is considered as one of the most successful methods applied to reconstruct alveolar bone and then to achieve periodontal defect repair/regeneration. In this paper, a novel polyamide-6/chitosan@nano-hydroxyapatite/polyamide-6 (PA6/CS@n-HA/PA6) bilayered tissue guided membranes by combining a solvent casting and an electrospinning technique was designed. The developed PA6/CS@n-HA/PA6 composites were characterized by a series of tests. The results show that n-HA/PA6 and electrospun PA6/CS layers are tightly bound by molecular interaction and chemical bonding, which enhances the bonding strength between two distinct layers. The porosity and adsorption average pore diameter of the PA6/CS@n-HA/PA6 membranes are 36.90 % and 22.61 nm, respectively. The tensile strength and elastic modulus of PA6/CS@n-HA/PA6 composites are 1.41 ± 0.18 MPa and 7.15 ± 1.09 MPa, respectively. In vitro cell culture studies demonstrate that PA6/CS@n-HA/PA6 bilayered scaffolds have biological safety, good bioactivity, biocompatibility and osteoconductivity.

Chitosan applications in studying and managing osteosarcoma

Osteosarcoma has a high prevalence among children and adolescents. Common treatments of this disease are not promising enough. Molecular processes involved in the pathogenesis of osteosarcoma are not fully understood. Besides, the remnants of tumor cells after surgery can cause bone destruction and recurrence of the disease. Thus, there is a need to develop novel drugs or enhancing the currently-used drugs as well as identifying bone-repairing methods. Chitosan is a natural compound produced by the deacetylation of chitin. Research has shown that chitosan can be used in various fields due to its beneficial effects, such as biodegradability and biocompatibility. Regarding cancer, chitosan exerts several anti-tumor activities. Moreover, it can be used in diagnostic techniques, drug delivery systems, and cell culture methods. Herein, we aim to discuss the potential roles of chitosan in studying and treating osteosarcoma. We review the literature on chitosan's applications as a drug delivery system and how it can be combined with other substances to improve its ability of local drug delivery. We take a look into the studies concerning the possible benefits of chitosan in the field of bone tissue engineering and 3D culturing. Furthermore, anti-cancer activities of different compounds of chitosan are reviewed.

Modified electrospun chitosan membranes for controlled release of simvastatin

Chitosan nanofibrous membranes have immense potential in tissue engineering and drug delivery applications because of their increased surface area, high degree of biocompatibility, and their ability to mimic the extracellular matrix. However, their use is often limited due to their extreme hydrophilic nature causing them to lose their nanofibrous structure in vivo. In the present study, chitosan membranes were modified either by acylation reactions using fatty acids of different chain lengths or tert-butyloxycarbonyl (tBOC) protecting groups to increase the hydrophobicity of the membranes and protect the nanofibrous structure. The modified membranes were characterized using scanning electron microscopy, attenuated total reflectance Fourier transform infrared spectroscopy, water contact angle and elemental analysis to confirm the addition of the modification groups. These membranes were then evaluated to control the release of a hydrophobic osteogenic drug-simvastatin (SMV). The interaction between SMV and the polymer was determined using molecular modeling. Pure SMV and SMV loaded membranes were examined for their in vitro cytotoxicity and osteogenic potential using preosteoblast mouse bone marrow stromal cells. From results, it was evident that as the fatty acid chain length increased from two to six methylene groups, the hydrophobicity of the membranes increased (59.2 ± 8.2° to 94.3 ± 8.5° water contact angle). The amount of drug released from the membranes could be controlled by changing the amount of initial drug loaded and/or the type of modifications. After 4 weeks, for a 500 μg loading, the short chain fatty acid modified membranes released 17.8 ± 3.2% of the drug whereas a long chain fatty acid released only 4.8 ± 0.8%. Similarly, for a 50 μg loading, short chain modified membranes released more (73.3 ± 33.3%) of the loaded drug as compared to the long chain membranes (43.0 ± 3.5%). The long chain fatty acid membranes released SMV for extended time periods of up to 90 days. This data was further supported by molecular modeling, which revealed that SMV was more compatible with more hydrophobic membranes. Cell studies showed that pure SMV from 75 to 600 ng/ml range possessed osteogenic potential in a dose dependent manner and the amount of SMV released from the most hydrophobic FA treated membranes was not cytotoxic and supported osteogenic differentiation. Therefore, this study demonstrates our ability to control the release of a hydrophobic drug from modified chitosan membranes as per the clinical need.

Effect of antiseptic gels in the microbiologic colonization of the suture threads after oral surgery

Three different bioadhesive gels were evaluated in a double-blind randomized clinical trial in which microbial growth in the suture thread was assessed following post-surgical application of the aforementioned gels. Also assessed in this trial were, the intensity of post-surgical pain as well as the degree of healing of the patients’ surgical wounds. A total of 21 patients (with 42 wisdom teeth) participated in this trial. Chlorhexidine gel, chlorhexidine-chitosan gel, and hyaluronic acid gel were evaluated, with a neutral water-based gel serving as the control agent. The aerobic and facultative anaerobic bacterial recovery on blood agar was lower in the placebo group than in the experimental groups. The most significant difference (p = 0.04) was observed in the chlorhexidine-chitosan group. in which the growth of Blood Agar and Mitis Salivarius Agar was significantly higher than in the placebo group. The intensity of post-surgical pain was very similar among all the groups. Significantly better healing rates were observed in the patients treated with chlorhexidine-chitosan gel when compared with those who used the placebo gel (p = 0.03), and in particular when compared with those patients who used hyaluronic acid gel (p = 0.01). Through our microbiological analyses, we were able to conclude that none of the bioadhesive gels tested resulted in beneficial reductions in the bacterial/fungal populations. However, the healing rates of patients who were treated with chlorhexidine-chitosan were better than those of the patients who used either the placebo gel or the hyaluronic acid gel.

Applications of chitin and chitosan nanofibers in bone regenerative engineering

Promoting bone regeneration and repairing defects are urgent and critical challenges in orthopedic clinical practice. Research on bone substitute biomaterials is essential for improving the treatment strategies for bone regeneration. Chitin and its derivative, chitosan, are among the most abundant natural biomaterials and widely found in the shells of crustaceans. Chitin and chitosan are non-toxic, antibacterial, biocompatible, degradable, and have attracted significant attention in bone substitute biomaterials. Chitin/chitosan nanofibers and nanostructured scaffolds have large surface area to volume ratios and high porosities. These scaffolds can be fabricated by electrospinning, thermally induced phase separation and self-assembly, and are widely used in biomedical applications such as biological scaffolds, drug delivery, bacterial inhibition, and wound dressing. Recently, some chitin/chitosan-based nanofibrous scaffolds have been found structurally similar to bone's extracellular matrix and can assist in bone regeneration. This review outlines the biomedical applications and biological properties of chitin/chitosan-based nanofibrous scaffolds in bone tissue engineering.

Influence of conductive PEDOT:PSS in a hard tissue scaffold: In vitro and in vivo study

The presence of a conductive component in bone scaffolds can be helpful in facilitating the intracellular electrical signaling among cells as well as improving bone healing when electromagnetic stimulation is applied. In this study, poly(3,4-ethylenedioxythiophene): poly(4-styrene sulfonate) as a biocompatible conductive polymer was incorporated into a hard tissue scaffold made of gelatin (Gel) and bioactive glass. The in vitro results revealed that incorporation of an optimized amount of poly(3,4-ethylenedioxythiophene): poly(4-styrene sulfonate) into the scaffold composition enhanced cell viability more than four times after 14 days incubation, compared to the scaffold without poly(3,4-ethylenedioxythiophene): poly(4-styrene sulfonate). The in vivo studies demonstrated the amount of new bone formation of Gel/bioactive glass/poly(3,4-ethylenedioxythiophene): poly(4-styrene sulfonate) scaffolds was significantly higher than the Gel/bioactive glass scaffolds.

Fluoride varnish containing chitosan demonstrated sustained fluoride release

Fluoride varnish is a professionally applied product that prevents dental caries. However, fluoride varnishes do not provide sustained fluoride release. The objective of this study was to prepare fluoride varnish formulations containing various amounts of chitosan that would generate sustained fluoride release. We evaluated their chemical structure, viscosity, and in vitro fluoride release. Furthermore, the 3-(4, 5-dimethylthiazolyl-2)-2,5diphenyltetrazolium bromide (MTT) assay and direct contact test were used to determine varnish cytotoxicity. We found that all fluoride varnish formulations had the same chemical structure. Their viscosity demonstrated a chitosan concentration-dependent increase. In vitro fluoride release showed a sustained fluoride release. The chitosan fluoride varnishes were cytotoxic to human gingival fibroblasts. We propose the new fluoride varnish formulation as a potential material to be used as a sustained release fluoride varnish.

Tissue Engineering: New Paradigm of Biomedicine

Tissue engineering is a multidisciplinary field of biomedicine that is being used to develop a new tissue or restore the function of diseased tissue/organ. The main objective of tissue engineering is to overcome the shortage of donor organs. Tissue engineering is mainly based on three components i.e. cells, scaffold and growth factors. Among these three components, scaffold is a primary influencing factor that provides the structural support to the cells and helps to deliver the growth factors which stimulate the proliferation and differentiation of cells to regenerate a new tissue. The properties of a scaffold mainly depend upon types of biomaterial and fabrication techniques that are used to fabricate the scaffold. Biofabrication facilitates the construction of three-dimensional complex of living (cells) and non-living (signaling molecules and extracellular matrices polymers etc.) components. Biofabrication has potential application especially in skin and bone tissue regeneration due to its accuracy, reproducibility and customization of scaffolds as well as cell and signaling molecule delivery. In this review article, different types of biomaterials and fabrication techniques have been discussed to fabricate of a nanofibrous scaffold along with different types of cells and growth factor which are used for tissue engineering applications to regenerate a new tissue. Among different techniques to fabricate a scaffold, electrospinning is simple and cost effective technique that has been mainly focused in the review to produce nanofibous scaffold. On the other hand, a tissue might be repair itself and restore to its normal function inside the body by applying the principle of regenerative medicine.

Visualization of junctional epithelial cell replacement by oral gingival epithelial cells over a life time and after gingivectomy

Junctional epithelium (JE), which is derived from odontogenic epithelial cells immediately after eruption, is believed to be gradually replaced by oral gingival epithelium (OGE) over a lifetime. However, the detailed process of replacement remains unclear. The aim of the present study was to clarify the process of JE replacement by OGE cells using a green fluorescent protein (GFP)–positive tooth germ transplantation method. GFP-positive JE was partly replaced by OGE cells and completely replaced on day 200 after transplantation, whereas there was no difference in the expression of integrin β4 (Itgb4) and laminin 5 (Lama5) between JE before and after replacement by OGE cells. Next, GFP-positive JE was partially resected. On day 14 after resection, the regenerated JE consisted of GFP-negative cells and also expressed both Itgb4 and Lama5. In addition, the gene expression profile of JE derived from odontogenic epithelium before gingivectomy was partly different from that of JE derived from OGE after gingivectomy. These results suggest that JE derived from the odontogenic epithelium is gradually replaced by OGE cells over time and JE derived from the odontogenic epithelium might have specific characteristics different to those of JE derived from OGE.

Potential of chitosan-based carrier for periodontal drug delivery

Periodontal diseases are chronic infectious diseases and are a major oral health burden. With the progress in the understanding of etiology, epidemiology and pathogenesis of periodontal diseases coupled with the understanding of the polymicrobial synergy in the dysbiotic oral microbial flora, several new therapeutic targets have been identified. The strategies to curb bacterial growth and production of factors that gradually destroy the tissue surrounding and supporting the teeth have been the cornerstone for inhibiting periodontitis. Systemic administration of antibiotics for the treatment of periodontitis have shown several drawbacks including: inadequate antibiotic concentration at the site of the periodontal pocket, a rapid decline of the plasma antibiotic concentration to sub-therapeutic levels, the development of microbial resistance due to sub-therapeutic drug levels and peak-plasma antibiotic concentrations which may be associated with various side effects. These obvious disadvantages have evoked an interest in the development of localized drug delivery systems that can provide an effective concentration of antibiotic at the periodontal site for the duration of the treatment with minimal side effects. A targeted sustained release device which could be inserted in the periodontal pocket and prolong the therapeutic levels at the site of action at a much lower dose is the need of the hour. Chitosan, a deacetylated derivative of chitin has attracted considerable attention owing to its special properties including antimicrobial efficacy, biodegradability, biocompatibility and non-toxicity. It also has the propensity to act as hydrating agent and display tissue healing and osteoinducting effect. The aim of this review is to shine a spotlight on the chitosan based devices developed for drug delivery application in the effective treatment of various periodontal disorders. The chitosan based carriers like fibers, films, sponge, microparticles, nanoparticles, gels that have been designed for sustained release of drug into the periodontal pocket are highlighted.

Evaluation of a hydrogel membrane on bone regeneration in furcation periodontal defects in dogs

The aim of the study was to evaluate bone regeneration using a canine model with surgically created periodontal defects filled for 12 weeks using a stratified biomaterial consisting in a biphasic calcium phosphate (BCP) covered with a crosslinking hydrogel acting as polymer membrane of silated hydroxypropyl methylcellulose (Si-HPMC) as the tested new concept. Bilateral, critical-sized, defects were surgically created at the mandibular premolar teeth of six adult beagle dogs. The defects were randomly allocated and: (i) left empty for spontaneous healing or filled with: (ii) BCP and a collagen membrane; (iii) BCP and hydrogel Si-HPMC membrane. At 12 weeks, the experimental conditions resulted in significantly enhanced bone regeneration in the test BCP/Si-HPMC group. Within the limits of this study, we suggest that the hydrogel Si-HPMC may act as an occlusive barrier to protect bone area from soft connective tissue invasion and then effectively contribute to enhance bone regeneration.

Guided bone regeneration: materials and biological mechanisms revisited

Guided bone regeneration (GBR) is commonly used in combination with the installment of titanium implants. The application of a membrane to exclude non‐osteogenic tissues from interfering with bone regeneration is a key principle of GBR. Membrane materials possess a number of properties which are amenable to modification. A large number of membranes have been introduced for experimental and clinical verification. This prompts the need for an update on membrane properties and the biological outcomes, as well as a critical assessment of the biological mechanisms governing bone regeneration in defects covered by membranes. The relevant literature for this narrative review was assessed after a MEDLINE/PubMed database search. Experimental data suggest that different modifications of the physicochemical and mechanical properties of membranes may promote bone regeneration. Nevertheless, the precise role of membrane porosities for the barrier function of GBR membranes still awaits elucidation. Novel experimental findings also suggest an active role of the membrane compartment per se in promoting the regenerative processes in the underlying defect during GBR, instead of being purely a passive barrier. The optimization of membrane materials by systematically addressing both the barrier and the bioactive properties is an important strategy in this field of research.

Design and fabrication of porous biodegradable scaffolds: a strategy for tissue engineering

Current strategies of tissue engineering are focused on the reconstruction and regeneration of damaged or deformed tissues by grafting of cells with scaffolds and biomolecules. Recently, much interest is given to scaffolds which are based on mimic the extracellular matrix that have induced the formation of new tissues. To return functionality of the organ, the presence of a scaffold is essential as a matrix for cell colonization, migration, growth, differentiation and extracellular matrix deposition, until the tissues are totally restored or regenerated. A wide variety of approaches has been developed either in scaffold materials and production procedures or cell sources and cultivation techniques to regenerate the tissues/organs in tissue engineering applications. This study has been conducted to present an overview of the different scaffold fabrication techniques such as solvent casting and particulate leaching, electrospinning, emulsion freeze-drying, thermally induced phase separation, melt molding and rapid prototyping with their properties, limitations, theoretical principles and their prospective in tailoring appropriate micro-nanostructures for tissue regeneration applications. This review also includes discussion on recent works done in the field of tissue engineering.

Repairing a bone defect with a three-dimensional cellular construct composed of a multi-layered cell sheet on electrospun mesh

In addition to providing maneuverability, electrospun nanofibrous meshes can make excellent supports for constructing flexible cell sheets to regulate cell behavior by nanofiber features. With the target of bone regeneration, herein composite nanofibers with two different fiber arrangements (nestlike, random) were electrospun from a blend solution containing poly(l-lactide) (PLLA) and gelatin (1:1 in weight ratio). Unlike the non-woven morphology in a random nanofibrous mesh, PLLA/gelatin composite nanofibers in the nestlike nanofibrous mesh displayed both non-woven and parallel morphologies. Both kinds of nanofibrous mesh were ∼50 μm thick as-prepared, and shrank to ∼30 μm after seeding with bone mesenchymal stromal cells (BMSCs). After 7 days of in vitro culture, cell sheets could form on both meshes (CSM) and on the culture plate. It was found that application of nanofibrous mesh promoted the osteogenic differentiation of BMSC sheets compared with the control. The nestlike mesh displayed slight superiority over the random mesh in enhancing osteogenic differentiation, but their different fiber arrangements did not cause much difference in cell proliferation. Three-dimensional multi-layered CSM constructs were built by stacking four mono-layered CSMs together. The CSM constructs (based on a nestlike or random nanofibrous mesh) were incubated in vitro for 3 days before being implanted into rat cranial defects. In comparison with the control group, there was significant formation of new calcified bone in both CSM construct-filled groups at 12 weeks' post-operation. The nestlike group showed slightly better bone healing (based on both qualitative and quantitative analysis) than the random group, while showing insignificant differences. We showed that the concept of using a three-dimensional multi-layered CSM construct in enhancing bone regeneration was feasible. Future studies should take more nanofiber features (e.g. bioactive components) into account to further enhance osteogenesis.

Fluorinated methacrylamide chitosan sequesters reactive oxygen species to relieve oxidative stress while delivering oxygen

Antioxidants play an important role in regulating overabundant reactive oxygen species (ROS) in wound healing to reduce oxidative stress and inflammation. In this work, we demonstrate for the first time that functionalization of methacrylamide chitosan (MAC) with aliphatic pentadecafluoro chains, to synthesize pentadecafluoro-octanoyl methacrylamide chitosan (MACF), enhances the antioxidant capacity of the MAC base hydrogel material, while being able to deliver oxygen for future enhanced wound healing applications. As such, MACF was shown to sequester more nitric oxide (p < 0.01) and hydroxyl (p < 0.0001) radicals as compared to the negative control even when delivering additional oxygen. MACF's beneficial antioxidant capacity was further confirmed in in vitro cell culture experiments using human dermal fibroblasts stressed with 2,2'-azobis(2-methylpropionamidine) dihydrochloride (AAPH). © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2368-2374, 2017.

Suture materials affect peri-implant bone healing and implant osseointegration

The aim of this study was to evaluate the effects of the remnants of two suture materials on osseointegration of titanium implants in a rabbit tibial model. Calibrated defects were prepared in the tibia of five Chinchilla rabbits. Filaments of nonresorbable (NR) nylon or resorbable (R) chitosan were placed at the bone to implant interface, whereas control sites had no suture material. After a healing period of 4 weeks, a pull-out test procedure was performed followed by enzymatic analyses of the wound fluid and relative quantification of mRNA levels for bone-related and cytokine markers from the peri-implant bone. A trend toward a reduced pull-out force was observed in the NR group (NR: 23.0 ± 12.8 N; R: 33.9 ± 11.3 N; control: 33.6 ± 24.0 N). Similarly, the bone resorption marker vacuolar type H+-ATPase was increased in the NR group compared with that in the control group (P = 0.041). The R group showed trends for lower alkaline phosphatase activity and osteocalcin expression and higher total protein content and RNA compared with the control group. In this submerged healing model, peri-implant bone healing was marginally affected by the two suture materials tested. However, there was a tendency toward better osseointegration and lower expression of bone resorption markers in the R group compared with the control group.

Osteogenic induction of bone marrow mesenchymal cells on electrospun polycaprolactone/chitosan nanofibrous membrane

A novel chitosan/polycaprolactone (CS/PCL) nanofibrous membrane by electrospinning was developed for guided tissue regeneration (GTR) to improve mechanical properties and to promote osteogenic differentiation. Firstly, chitosan and PCL solutions of different weight ratios (0/100, 30/70, 50/50) were mixed and then electrospun. Our data demonstrated that the CS/PCL (30/70) nanofibrous membrane promoted an increased rBMSCs proliferation when compared to the CS/PCL (50/50) membrane and pure PCL (0/100) membrane. The highest ALP activity and extracellular calcium deposit were observed on the CS/PCL (30/70) nanofibrous membrane, followed by the CS/PCL (50/50) and pure PCL nanofibrous membrane. Furthermore, the expression of osteocalcin (OCN) and Runx2 were also significantly higher on the CS/PCL (30/70, 50/50) nanofibrous membrane as compared to the pure PCL nanofibrous membrane. In conclusion, the electrospun CS/PCL nanofibrous membrane was found to be a biocompatible material that could stimulate osteogenic differentiation, suggesting that the novel CS/PCL membrane has an interesting potential as use for GTR.

The potential of stromal cell-derived factor-1 delivery using a collagen membrane for bone regeneration

Stromal cell-derived factor-1 (SDF-1) is a cytokine that is important in stem and progenitor cell recruitment in tissue repair after injury. Regenerative procedures using collagen membranes (CMs) are presently well established in periodontal and implant dentistry. The objective of this study is to test the subsequent effects of the released SDF-1 from a CM on bone regeneration compared to platelet-derived growth factor (PDGF) in vitro and in vivo. For in vitro studies, cell proliferation, alkaline phosphatase activity, and osteoblastic differentiation marker genes were assessed after MC3T3-E1 mouse preosteoblasts were cultured with CMs containing factors. In vivo effects were investigated by placement of CMs containing SDF-1 or PDGF using a rat mandibular bone defect model. At 4 weeks after the surgery, the new bone formation was measured using micro-computed tomography (µCT) and histological analysis. The results of in vitro studies revealed that CM delivery of SDF-1 significantly induced cell proliferation, ALP activity, and gene expression of all osteogenic markers compared to the CM alone or control, similar to PDGF. Quantitative and qualitative µCT analysis for volume of new bone formation and the percentage of new bone area showed that SDF-1-treated groups significantly increased and accelerated bone regeneration compared to control and CM alone. The enhancement of bone formation in SDF-1-treated animals was dose-dependent and with levels similar to those measured with PDGF. These results suggest that a CM with SDF-1 may be a great candidate for growth factor delivery that could be a substitute for PDGF in clinical procedures where bone regeneration is necessary.

Biodegradable Polymer Membranes Applied in Guided Bone/Tissue Regeneration: A Review

Polymer membranes have been widely used in guided tissue regeneration (GTR) and guided bone regeneration (GBR). In this review, various commercially available membranes are described. Much attention is paid to the recent development of biodegradable polymers applied in GTR and GBR, and the important issues of biodegradable polymeric membranes, including their classification, latest experimental research and clinical applications, as well as their main challenges are addressed. Herein, natural polymers, synthetic polymers and their blends are all introduced. Pure polymer membranes are biodegradable and biocompatible, but they lack special properties such as antibacterial properties, osteoconductivity, and thus polymer membranes loaded with functional materials such as antibacterial agents and growth factors show many more advantages and have also been introduced in this review. Despite there still being complaints about polymer membranes, such as their low mechanical properties, uncontrollable degradation speed and some other drawbacks, these problems will undoubtedly be conquered and biodegradable polymers will have more applications in GTR and GBR.

Novel meloxicam releasing electrospun polymer/ceramic reinforced biodegradable membranes for periodontal regeneration applications

Periodontal disease is associated with the destruction of periodontal tissues, along with other disorders/problems including inflammation of tissues and severe pain. This paper reports the synthesis of meloxicam (MX) immobilized biodegradable chitosan (CS)/poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) based electrospun (e-spun) fibers and films. Electrospinning was employed to produce drug loaded fibrous mats, whereas films were generated by solvent casting method. In-vitro drug release from materials containing varying concentrations of MX revealed that the scaffolds containing higher amount of drug showed comparatively faster release. During initial first few hours fast release was noted from membranes and films; however after around 5h sustained release was achieved. The hydrogels showed good swelling property, which is highly desired for soft tissue engineered implants. To investigate the biocompatibility of our synthesized materials, VERO cells (epithelial cells) were selected and cell culture results showed that these all materials were non-cytotoxic and also these cells were very well proliferated on these synthesized scaffolds. These properties along with the anti-inflammatory potential of our fabricated materials suggest their effective utilization in periodontital treatments.

Chitosan nanofiber scaffold improves bone healing via stimulating trabecular bone production due to upregulation of the Runx2/osteocalcin/alkaline phosphatase signaling pathway

Osteoblasts play critical roles in bone formation. Our previous study showed that chitosan nanofibers can stimulate osteoblast proliferation and maturation. This translational study used an animal model of bone defects to evaluate the effects of chitosan nanofiber scaffolds on bone healing and the possible mechanisms. In this study, we produced uniform chitosan nanofibers with fiber diameters of approximately 200 nm. A bone defect was surgically created in the proximal femurs of male C57LB/6 mice, and then the left femur was implanted with chitosan nanofiber scaffolds for 21 days and compared with the right femur, which served as a control. Histological analyses revealed that implantation of chitosan nanofiber scaffolds did not lead to hepatotoxicity or nephrotoxicity. Instead, imaging analyses by X-ray transmission and microcomputed tomography showed that implantation of chitosan nanofiber scaffolds improved bone healing compared with the control group. In parallel, microcomputed tomography and bone histomorphometric assays further demonstrated augmentation of the production of new trabecular bone in the chitosan nanofiber-treated group. Furthermore, implantation of chitosan nanofiber scaffolds led to a significant increase in the trabecular bone thickness but a reduction in the trabecular parameter factor. As to the mechanisms, analysis by confocal microscopy showed that implantation of chitosan nanofiber scaffolds increased levels of Runt-related transcription factor 2 (Runx2), a key transcription factor that regulates osteogenesis, in the bone defect sites. Successively, amounts of alkaline phosphatase and osteocalcin, two typical biomarkers that can simulate bone maturation, were augmented following implantation of chitosan nanofiber scaffolds. Taken together, this translational study showed a beneficial effect of chitosan nanofiber scaffolds on bone healing through stimulating trabecular bone production due to upregulation of Runx2-mediated alkaline phosphatase and osteocalcin gene expressions. Our results suggest the potential of chitosan nanofiber scaffolds for therapy of bone diseases, including bone defects and bone fractures.