Optical ultrasound sensors for photoacoustic imaging: a narrative review

Laser-induced ultrasound in multiple thin layers-An analytical solution

Laser-induced ultrasound is based on the thermo-elastic conversion of absorbed short light pulses to pressure pulses. In the work presented here, laser-induced ultrasound in a planar structure of interconnected layers with variations in optical, thermal, and mechanical properties is studied. Layered structures can be used for generating wideband ultrasonic pulses specific to a chosen application. An analytical time-domain solution is derived for the resulting pressure transmitted from the layered structure. The solution is derived for an arbitrary number of layers with an arbitrary optical absorption profile. Free space Green's functions with image sources are used to derive the solution. A solution employing the Beer-Lambert law is also proposed. The simplification with reflections only at the boundaries is in agreement with previous published results. The spectral properties of the generated pulse are derived, where the effects of optical absorption coefficients and layer thicknesses are shown. The analytical solution is compared to one-dimensional (1D) simulations and a three-dimensional (3D) simulation, realised as a two-dimensional (2D) axially symmetric case, using the matlab toolbox k-Wave. The 3D simulation on-axis pressure agrees well with the 1D analytical solution when the diameter of the laser beam is larger by approximately 1 order of magnitude than the thickness of the planar layered structure.

Ultrasound sensing with optical microcavities

Ultrasound sensors play an important role in biomedical imaging, industrial nondestructive inspection, etc. Traditional ultrasound sensors that use piezoelectric transducers face limitations in sensitivity and spatial resolution when miniaturized, with typical sizes at the millimeter to centimeter scale. To overcome these challenges, optical ultrasound sensors have emerged as a promising alternative, offering both high sensitivity and spatial resolution. In particular, ultrasound sensors utilizing high-quality factor (Q) optical microcavities have achieved unprecedented performance in terms of sensitivity and bandwidth, while also enabling mass production on silicon chips. In this review, we focus on recent advances in ultrasound sensing applications using three types of optical microcavities: Fabry-Perot cavities, π-phase-shifted Bragg gratings, and whispering gallery mode microcavities. We provide an overview of the ultrasound sensing mechanisms employed by these microcavities and discuss the key parameters for optimizing ultrasound sensors. Furthermore, we survey recent advances in ultrasound sensing using these microcavity-based approaches, highlighting their applications in diverse detection scenarios, such as photoacoustic imaging, ranging, and particle detection. The goal of this review is to provide a comprehensive understanding of the latest advances in ultrasound sensing with optical microcavities and their potential for future development in high-performance ultrasound imaging and sensing technologies.

Optical ultrasound sensors for photoacoustic imaging: a review

Significance

Photoacoustic (PA) imaging is an emerging biomedical imaging modality that can map optical absorption contrast in biological tissues by detecting ultrasound signal. Piezoelectric transducers are commonly used in PA imaging to detect the ultrasound signals. However, piezoelectric transducers suffer from low sensitivity when the dimensions are reduced and are easily influenced by electromagnetic interference. To avoid these limitations, various optical ultrasound sensors have been developed and shown their great potential in PA imaging.

Aim

Our study aims to summarize recent progress in optical ultrasound sensor technologies and their applications in PA imaging.

Approach

The commonly used optical ultrasound sensing techniques and their applications in PA systems are reviewed. The technical advances of different optical ultrasound sensors are summarized.

Results

Optical ultrasound sensors can provide wide bandwidth and improved sensitivity with miniatured size, which enables their applications in PA imaging.

Conclusions

The optical ultrasound sensors are promising transducers in PA imaging to provide higher-resolution images and can be used in new applications with their unique advantages.

Miniaturised dual-modality all-optical ultrasound probe for laser interstitial thermal therapy (LITT) monitoring

All-optical ultrasound (OpUS) has emerged as an imaging paradigm well-suited to minimally invasive imaging due to its ability to provide high resolution imaging from miniaturised fibre optic devices. Here, we report a fibre optic device capable of concurrent laser interstitial thermal therapy (LITT) and real-time in situ all-optical ultrasound imaging for lesion monitoring. The device comprised three optical fibres: one each for ultrasound transmission, reception and thermal therapy light delivery. This device had a total lateral dimension of <1 mm and was integrated into a medical needle. Simultaneous LITT and monitoring were performed on ex vivo lamb kidney with lesion depth tracked using M-mode OpUS imaging. Using one set of laser energy parameters for LITT (5 W, 60 s), the lesion depth varied from 3.3 mm to 8.3 mm. In all cases, the full lesion depth could be visualised and measured with the OpUS images and there was a good statistical agreement with stereomicroscope images acquired after ablation (t=1.36, p=0.18). This work demonstrates the feasibility and potential of OpUS to guide LITT in tumour resection.

Fabrication of a translational photoacoustic needle sensing probe for interstitial photoacoustic spectral analysis

In our previous study, we demonstrated the feasibility of using an all-optical interstitial photoacoustic (PA) needle sensing probe for quantitative study of tissue architectures with PA spectral analysis (PASA). In this work, we integrated the optical components into an 18 G steel needle sheath for clinical translation. The dimensions of the needle probe are identical to those of a core biopsy probe and are fully compatible with standard procedures such as prostate biopsy. To our knowledge, this is the first interstitial PA probe that can acquire signals with sufficient temporal length for statistics-based PASA. We treated the inner surface of the steel needle sheath and successfully suppressed the vibrational PA signals generated at the surface. Purposed at boosting the measurement sensitivity and extending sensing volume, we upgraded the Fabry-Pérot hydrophone with a plano-concave structure. The performance of the translational needle PA sensing probe was examined with phantoms containing microspheres. The trend of the linear spectral slopes shows negatively correlated to the microsphere dimensions while the midband-fits are positively correlated to microsphere diameters and concentrations. The PASA quantifications show the ability to differentiate microspheres with varied dimensions.

Estimation of underwater acoustic direction-of-arrival using the probe beam deflection technique

This paper proposes a method of estimating the underwater acoustic direction-of-arrival using several laser beams impinging on a propagating underwater acoustic wave. The deflection of the laser beam caused by the spatial variation of the optical refractive index, which is further due to the modulation of the acoustic wave, reflects the information of direction-of-arrival and is sensed by the position sensitive detector (PSD). The sensing of the minute displacement on the PSD, in fact, introduces an extra dimension in the depth direction, which is a significant advantage over the conventional piezoelectric sensing regime. The employment of the extra sensing dimension can overcome several shortcomings, represented by spatial aliasing and phase ambiguity, existing in the current direction-of-arrival estimating methods. In addition, the ringing phenomenon of the piezoelectric effect is greatly reduced in the proposed laser-based sensing regime. By the flexibility of placing the laser beams, a prototype of the hydrophone is designed and manufactured, and a series of testing is performed. The results show that, benefiting from the probe beam deflection technique and combining the rough estimate and fine calculation, the resolution of the underwater acoustic direction-of-arrival can be improved to better than 0.016°, which can support and reform many underwater applications such as underwater acoustic communication, underwater detection, and ocean monitoring.