Three-dimensional modelling and three-dimensional printing in pediatric and congenital cardiac surgery

Application of three-dimensional printing in cardiovascular diseases: a bibliometric analysis

AIM

This paper aimed to explore the application of three-dimensional (3D) printing in cardiovascular diseases, to reach an insight in this field and prospect the future trend.

METHODS

The articles were selected from the Web of Science Core Collection database. Excel 2019, VOSviewer 1.6.16, and CiteSpace 6.1.R6 were used to analyze the information.

RESULTS

A total of 467 papers of 3D printing in cardiovascular diseases were identified, and the first included literature appeared in 2000. A total of 692 institutions from 52 countries participated in the relevant research, while the United States of America contributed to 160 articles and were in a leading position. The most productive institution was Curtin University , and Zhonghua Sun who has posted the most articles ( n =8) was also from there. The Frontiers in Cardiovascular Medicine published most papers ( n =25). The Journal of Thoracic and Cardiovascular Surgery coveted the most citations ( n =520). Related topics of frontiers will still focus on congenital heart disease, valvular heart disease, and left atrial appendage closure.

CONCLUSIONS

The authors summarized the publication information of the application of 3D printing in cardiovascular diseases related literature from 2000 to 2023, including country and institution of origin, authors, and publication journal. This study can reflect the current hotspots and novel directions for the application of 3D printing in cardiovascular diseases.

3D Patient-Specific Virtual Models for Presurgical Planning in Patients with Recto-Sigmoid Endometriosis Nodules: A Pilot Study

Background and Objective: In recent years, 3D printing has been used to support surgical planning or to guide intraoperative procedures in various surgical specialties. An improvement in surgical planning for recto-sigmoid endometriosis (RSE) excision might reduce the high complication rate related to this challenging surgery. The aim of this study was to build novel presurgical 3D models of RSE nodules from magnetic resonance imaging (MRI) and compare them with intraoperative findings. Materials and Methods: A single-center, observational, prospective, cohort, pilot study was performed by enrolling consecutive symptomatic women scheduled for minimally invasive surgery for RSE between November 2019 and June 2020 at our institution. Preoperative MRI were used for building 3D models of RSE nodules and surrounding pelvic organs. 3D models were examined during multi-disciplinary preoperative planning, focusing especially on three domains: degree of bowel stenosis, nodule’s circumferential extension, and bowel angulation induced by the RSE nodule. After surgery, the surgeon was asked to subjectively evaluate the correlation of the 3D model with the intra-operative findings and to express his evaluation as “no correlation”, “low correlation”, or “high correlation” referring to the three described domains. Results: seven women were enrolled and 3D anatomical virtual models of RSE nodules and surrounding pelvic organs were generated. In all cases, surgeons reported a subjective “high correlation” with the surgical findings. Conclusion: Presurgical 3D models could be a feasible and useful tool to support surgical planning in women with recto-sigmoidal endometriotic involvement, appearing closely related to intraoperative findings.

Development of a 3D printed patient-specific neonatal brain simulation model using multimodality imaging for perioperative management

BACKGROUND

Medical-imaging-based three-dimensional (3D) printed models enable improvement in skills training, surgical planning, and decision-making. This pilot study aimed to use multimodality imaging and to add and compare 3D ultrasound as a future standard to develop realistic neonatal brain models including the ventricular system.

METHODS

Retrospective computed tomography (CT), magnetic resonance imaging (MRI), and 3D ultrasound-based brain imaging protocols of five neonatal patients were analyzed and subsequently segmented with the aim of developing a multimodality imaging-based 3D printed model. The ventricular anatomy was analyzed to compare the MRI and 3D ultrasound modalities.

RESULTS

A realistic anatomical model of the neonatal brain, including the ventricular system, was created using MRI and 3D ultrasound data from one patient. T2-weighted isovoxel 3D MRI sequences were found to have better resolution and accuracy than 2D sequences. The surface area, anatomy, and volume of the lateral ventricles derived from both MRI and 3D ultrasound were comparable.

CONCLUSIONS

We created an ultrasound- and MRI-based 3D printed patient-specific neonatal brain simulation model that can be used for perioperative management. To introduce 3D ultrasound as a standard for 3D models, additional dimensional correlations between MRI and ultrasound need to be examined.

IMPACT

We studied the feasibility of implementing 3D ultrasound as a standard for 3D printed models of the neonatal brain. Different imaging modalities were compared and both 3D isotropic MRI and 3D ultrasound imaging are feasible for printing neonatal brain models with good dimensional accuracy and anatomical replication. Further dimensional correlations need to be defined to implement it as a standard to produce 3D printed models.

Three-Dimensional Virtual and Printed Prototypes in Complex Congenital and Pediatric Cardiac Surgery-A Multidisciplinary Team-Learning Experience

Three-dimensional (3D) virtual modeling and printing advances individualized medicine and surgery. In congenital cardiac surgery, 3D virtual models and printed prototypes offer advantages of better understanding of complex anatomy, hands-on preoperative surgical planning and emulation, and improved communication within the multidisciplinary team and to patients. We report our single center team-learning experience about the realization and validation of possible clinical benefits of 3D-printed models in surgical planning of complex congenital cardiac surgery. CT-angiography raw data were segmented into 3D-virtual models of the heart-great vessels. Prototypes were 3D-printed as rigid “blood-volume” and flexible “hollow”. The accuracy of the models was evaluated intraoperatively. Production steps were realized in the framework of a clinical/research partnership. We produced 3D prototypes of the heart-great vessels for 15 case scenarios (nine males, median age: 11 months) undergoing complex intracardiac repairs. Parity between 3D models and intraoperative structures was within 1 mm range. Models refined diagnostics in 13/15, provided new anatomic information in 9/15. As a team-learning experience, all complex staged redo-operations (13/15; Aristotle-score mean: 10.64 ± 1.95) were rehearsed on the 3D models preoperatively. 3D-printed prototypes significantly contributed to an improved/alternative operative plan on the surgical approach, modification of intracardiac repair in 13/15. No operative morbidity/mortality occurred. Our clinical/research partnership provided coverage for the extra time/labor and material/machinery not financed by insurance. 3D-printed models provided a team-learning experience and contributed to the safety of complex congenital cardiac surgeries. A clinical/research partnership may open avenues for bioprinting of patient-specific implants.

Three-Dimensional Printing: is it useful for Cardiac Surgery?

Introduction

The medical use of three-dimensional (3-D) images has been a topic in the literature since 1988, but 95% of papers on 3-D printing were published in the last six years. The increase in publications is the result of advances in 3-D printing methods, as well as of the increasing availability of these machines in different hospitals. This paper sought to review the literature on 3-D printing and to discuss thoughtful ideas regarding benefits and challenges to its incorporation into cardiothoracic surgeons’ routines.

Methods

A comprehensive and systematic search of the literature was performed in PubMed and included material published as of March 2020.

Results

Using this search strategy, 9,253 publications on 3-D printing and 497 on “heart” 3-D printing were retrieved.

Conclusion

3-D printed models are already helping surgeons to plan their surgeries, helping patients and their families to understand complex anatomy, helping fellows and residents to practice surgery, even for rare cases, and helping nurses and other health care staff to better understand some conditions, such as heart diseases.

Personalized 3D printed coronary models in coronary stenting

Background

3D printing has shown great promise in cardiovascular disease, with reports mainly focusing on pre-surgical planning and medical education. Research on utilization of 3D printed models in simulating coronary stenting has not been reported. In this study, we presented our experience of placing coronary stents into personalized 3D printed coronary models with the aim of determining stent lumen visibility with images reconstructed with different postprocessing views and algorithms.

Methods

A total of six coronary stents with diameter ranging from 2.5 to 4.0 mm were placed into 3 patient-specific 3D printed coronary models for simulation of coronary stenting. The 3D printed models were placed in a plastic container and scanned on a 192-slice third generation dual-source CT scanner with images reconstructed with soft (Bv36) and sharp (Bv59) kernel algorithms. Thick and thin slab maximum-intensity projection (MIP) images were also generated from the original CT data for comparison of stent lumen visibility. Stent lumen diameter was measured on 2D axial and MIP images, while stent diameter was measured on 3D volume rendering images. 3D virtual intravascular endoscopy (VIE) images were generated to provide intraluminal views of the coronary wall and stent appearances.

Results

All of these stents were successfully placed into the right and left coronary arteries but 2 of them did not obtain wall apposition along the complete length. The stent lumen visibility ranged from 54 to 97%, depending on the stent location in the coronary arteries. The mean stent lumen diameters measured on 2D axial, thin and thick slab MIP images were found to be significantly smaller than the actual size (P<0.01). Thick slab MIP images resulted in measured stent lumen diameters smaller than those from thin slab MIP images, with significant differences noticed in most of the measurements (4 out of 6 stents) (P<0.05), and no significant differences in the remaining 2 stents (P=0.19-0.38). In contrast, 3D volume rendering images allowed for more accurate measurements with measured stent diameters close to the actual dimensions in most of these coronary stents, except for the stent placed at the right coronary artery in one of the models due to insufficient expansion of the stent. Images reconstructed with sharp kernel Bv59 significantly improved stent lumen visibility when compared to the smooth Bv36 kernel (P=0.01). 3D VIE was successfully generated in all of the datasets with clear visualization of intraluminal views of the stents in relation to the coronary wall.

Conclusions

This preliminary report shows the feasibility of using 3D printed coronary artery models in coronary stenting for investigation of optimal coronary CT angiography protocols. Future studies should focus on placement of more stents with a range of stent diameters in the quest to reduce the need for invasive angiography for surveillance.

[Application of 3D printing techniques in treatment of congenital heart disease]

Congenital heart disease (CHD) is the most common birth defect at present. In recent years, the application of 3D printing in the diagnosis and treatment of CHD has been widely recognized, which presents CHD lesions in 3D solid model and provides a better understanding of the anatomy of CHD. In the future, 3D printing technology would improve the surgical proficiency, shorten the operation time, reduce the occurrence of perioperative complications, and create more personalized cardiovascular implants, therefore promote the precision of diagnosis and treatment for congenital heart disease. This article reviews the application of 3D printing technology in preoperative planning, intraoperative navigation and personalized implants of CHD, in surgical training and medical education, as well as in promoting doctor-patient communication and better understanding their condition for patients.

Fused Deposition Modeling 3D Printing: Test Platforms for Evaluating Post-Fabrication Chemical Modifications and In-Vitro Biological Properties

3D printing is attracting considerable interest for its capacity to produce prototypes and small production runs rapidly. Fused deposit modeling (FDM) was used to produce polyvalent test plates for investigation of the physical, chemical, and in-vitro biological properties of printed materials. The polyvalent test plates (PVTPs) are poly-lactic acid cylinders, 14 mm in diameter and 3 mm in height. The polymer ester backbone was surface modified by a series of ramified and linear oligoamines to increase its hydrophilicity and introduce a positive charge. The chemical modification was verified by FT-IR spectroscopy, showing the introduction of amide and amine functions, and contact angle measurements confirmed increased hydrophilicity. Morphology studies (SEM, optical microscopy) indicated that the modification of PVTP possessed a planar morphology with small pits. Positron annihilation lifetime spectroscopy demonstrated that the polymeric free volume decreased on modification. An MTT-based prolonged cytotoxicity test using Caco-2 cells showed that the PVTPs are non-toxic at the cellular level. The presence of surface oligoamines on the PVTPs reduced biofilm formation by Candida albicans SC5314 significantly. The results demonstrate that 3D printed objects may be modified at their surface by a simple amidation reaction, resulting in a reduced propensity for biofilm colonization and cellular toxicity.

Personalized Three-Dimensional Printed Models in Congenital Heart Disease

Patient-specific three-dimensional (3D) printed models have been increasingly used in cardiology and cardiac surgery, in particular, showing great value in the domain of congenital heart disease (CHD). CHD is characterized by complex cardiac anomalies with disease variations between individuals; thus, it is difficult to obtain comprehensive spatial conceptualization of the cardiac structures based on the current imaging visualizations. 3D printed models derived from patient's cardiac imaging data overcome this limitation by creating personalized 3D heart models, which not only improve spatial visualization, but also assist preoperative planning and simulation of cardiac procedures, serve as a useful tool in medical education and training, and improve doctor-patient communication. This review article provides an overall view of the clinical applications and usefulness of 3D printed models in CHD. Current limitations and future research directions of 3D printed heart models are highlighted.

The Role of 3D Printing in Medical Applications: A State of the Art

Three-dimensional (3D) printing refers to a number of manufacturing technologies that generate a physical model from digital information. Medical 3D printing was once an ambitious pipe dream. However, time and investment made it real. Nowadays, the 3D printing technology represents a big opportunity to help pharmaceutical and medical companies to create more specific drugs, enabling a rapid production of medical implants, and changing the way that doctors and surgeons plan procedures. Patient-specific 3D-printed anatomical models are becoming increasingly useful tools in today's practice of precision medicine and for personalized treatments. In the future, 3D-printed implantable organs will probably be available, reducing the waiting lists and increasing the number of lives saved. Additive manufacturing for healthcare is still very much a work in progress, but it is already applied in many different ways in medical field that, already reeling under immense pressure with regards to optimal performance and reduced costs, will stand to gain unprecedented benefits from this good-as-gold technology. The goal of this analysis is to demonstrate by a deep research of the 3D-printing applications in medical field the usefulness and drawbacks and how powerful technology it is.