Unaddressed Cam Deformity Is Associated with Elevated Joint Contact Stress After Periacetabular Osteotomy

Persistently elevated joint contact stress after periacetabular osteotomy is associated with joint failure at minimum 10-year follow-up

Periacetabular osteotomy (PAO) is a common treatment for prearthritic hip dysplasia. The goal of this investigation was to determine if computationally assessed hip contact mechanics are associated with joint failure at minimum 10-year follow-up. One hundred patients with hip dysplasia (125 hips) completed patient-reported outcomes an average of 13.8 years (range 10.0-18.0 years) after PAO. 63/125 hips were classified as having failed: 26 converted to total hip arthroplasty (THA) and 37 with significant disability indicated by modified Harris Hip Score (mHHS) ≤ 70. Differences in discrete element analysis-computed contact mechanics were compared between (1) preserved and failed hips, (2) preserved hips and hips that failed by THA, and (3) preserved hips and hips that failed by mHHS ≤ 70. Failed hips had significantly higher preoperative contact stress and exposure metrics (p < 0.001-0.009) than preserved hips. Failed hips also had significantly higher postoperative peak contact stress (p = 0.018), higher mean contact stress (p < 0.001), and smaller contact area (p = 0.044). When assessed based on type of failure, hips that failed by THA had significantly higher postoperative contact stress and exposure metrics than preserved hips (p < 0.001-0.020). In hips that failed by mHHS ≤ 70, mean postoperative contact stress exposure was significantly higher compared to preserved hips (p = 0.043). Despite improved radiographic measures of dysplasia after PAO, pathologic joint contact mechanics can persist and predict treatment failure at minimum 10 years after surgery. Operative and nonoperative techniques specifically intended to reduce harmful contact mechanics in dysplastic hips may have the potential to further improve clinical outcomes after PAO.

Ultra-long-term results of the Chiari pelvic osteotomy in hip dysplasia patients: a minimum of thirty-five years follow-up

PURPOSE

The Chiari pelvic osteotomy was the first surgical procedure to address hip dysplasia by changing the position of the acetabulum by medialization, thus creating a bony roof and improving biomechanical conditions. The aim of this retrospective cohort study was to report on the very long-term results of this technique.

METHODS

Out of a consecutive series of 1536 hips, 504 in 405 patients were available for follow-up. The patients were assessed by physical and radiological examination. A Kaplan-Meier survival analysis with total hip arthroplasty as an endpoint was performed and stratified for age groups, pre-operative diagnosis, sex and osteoarthritis stage.

RESULTS

The average follow-up was 36 ± 8.1 years (range, 35.2 to 54). The average pain level on the Visual Analogue Scale was 2.9 ± 2.6 (range 0 to 8.7). The average Harris Hip Score was 80.2 ± 17.4 (range 17.4 to 100). Correction of dysplasia was effective and remained stable over time. Osteoarthritis significantly increased over time with 53% Tönnis grade 3 at follow-up. The cumulative survivorship was 79.8% (95% confidence interval (CI), 76.1-83.2%) at 20 years, 57.1% (95% CI, 52.8-61.8%) at 30 years and 35% (95% CI, 30.3-40.3%) at 40 years. Young age, male sex and low osteoarthritis grade were positive prognostic factors.

CONCLUSIONS

Although the Chiari pelvic osteotomy is considered a salvage procedure nowadays, it achieved excellent long-term results even in indications, which would be treated differently today. Young patients without osteoarthritis had the best outcome.

Radiographically successful periacetabular osteotomy does not achieve optimal contact mechanics in dysplastic hips

BACKGROUND

Optimal correction of hip dysplasia via periacetabular osteotomy may reduce osteoarthritis development by reducing damaging contact stress. The objective of this study was to computationally determine if patient-specific acetabular corrections that optimize contact mechanics can improve upon contact mechanics resulting from clinically successful, surgically achieved corrections.

METHODS

Preoperative and postoperative hip models were retrospectively created from CT scans of 20 dysplasia patients treated with periacetabular osteotomy. A digitally extracted acetabular fragment was computationally rotated in 2-degree increments around anteroposterior and oblique axes to simulate candidate acetabular reorientations. From discrete element analysis of each patient's set of candidate reorientation models, a mechanically optimal reorientation that minimized chronic contact stress exposure and a clinically optimal reorientation that balanced improving mechanics with surgically acceptable acetabular coverage angles was selected. Radiographic coverage, contact area, peak/mean contact stress, and peak/mean chronic exposure were compared between mechanically optimal, clinically optimal, and surgically achieved orientations.

FINDINGS

Compared to actual surgical corrections, computationally derived mechanically/clinically optimal reorientations had a median[IQR] 13[4-16]/8[3-12] degrees and 16[6-26]/10[3-16] degrees more lateral and anterior coverage, respectively. Mechanically/clinically optimal reorientations had 212[143-353]/217[111-280] mm2 more contact area and 8.2[5.8-11.1]/6.4[4.5-9.3] MPa lower peak contact stresses than surgical corrections. Chronic metrics demonstrated similar findings (p ≤ 0.003 for all comparisons).

INTERPRETATION

Computationally selected orientations achieved a greater mechanical improvement than surgically achieved corrections; however, many predicted corrections would be considered acetabular over-coverage. Identifying patient-specific corrections that balance optimizing mechanics with clinical constraints will be necessary to reduce the risk of osteoarthritis progression after periacetabular osteotomy.

[Hip dysplasia: What influence do age, arthrosis and concomitant diseases have on the treatment result?]

Pelvic osteotomies are an established treatment for symptomatic adult hip dysplasia with a promising long-term outcome. Results depend not only on the achieved acetabular reorientation but also on patient-factors like preoperative joint condition (degree of osteoarthritis and joint congruency) and age. Additionally, the diagnosis and appropriate therapy of impingement-associated hip deformities is essential in order to achieve good mid- and long-term outcomes. The influence of chondrolabral pathology on the outcome of pelvic osteotomies is not yet defined. Symptomatic patients with residual dysplasia after previous pelvic or acetabular osteotomies can benefit from an additional osteotomy, although results can be worse in comparison to prior unoperated joints. Obesity can make surgery more demanding and increases the complication profile of PAO, although it has no influence on the postoperative outcome. Regarding the overall prognosis after an osteotomy, the consideration of combined risk factors is superior to the concentration on individual factors alone.

Joint contact stress improves in dysplastic hips after periacetabular osteotomy but remains higher than in normal hips

AIM

The purpose of this study was to use computational modeling to determine if surgical correction of hip dysplasia restores hip contact mechanics to those of asymptomatic, radiographically normal hips.

METHODS

Discrete element analysis (DEA) was used to compute joint contact stresses during the stance phase of normal walking gait for 10 individuals with radiographically normal, asymptomatic hips and 10 age- and weight-matched patients with acetabular dysplasia who underwent periacetabular osteotomy (PAO).

RESULTS

Mean and peak contact stresses were higher (p < 0.001 and p = 0.036, respectively) in the dysplastic hips than in the matched normal hips. PAO normalised standard radiographic measurements and medialised the location of computed contact stress within the joint. Mean contact stress computed in dysplastic hips throughout the stance phase of gait (median 5.5 MPa, [IQR 3.9-6.1 MPa]) did not significantly decrease after PAO (3.7 MPa, [IQR 3.2-4.8]; p = 0.109) and remained significantly (p < 0.001) elevated compared to radiographically normal hips (2.4 MPa, [IQR 2.2-2.8 MPa]). Peak contact stress demonstrated a similar trend. Joint contact area during the stance phase of gait in the dysplastic hips increased significantly (p = 0.036) after PAO from 395 mm2 (IQR 378-496 mm2) to 595 mm2 (IQR 474-660 mm2), but remained significantly smaller (p = 0.001) than that for radiographically normal hips (median 1120 mm2, IQR 853-1444 mm2).

CONCLUSIONS

While contact mechanics in dysplastic hips more closely resembled those of normal hips after PAO, the elevated contact stresses and smaller contact areas remaining after PAO indicate ongoing mechanical abnormalities should be expected even after radiographically successful surgical correction.

Chronically elevated contact stress exposure correlates with intra-articular cartilage degeneration in patients with concurrent acetabular dysplasia and femoroacetabular impingement

Hip dysplasia is known to lead to premature osteoarthritis. Computational models of joint mechanics have documented elevated contact stresses in dysplastic hips, but elevated stress has not been directly associated with regional cartilage degeneration. The purpose of this study was to determine if a relationship exists between elevated contact stress and intra-articular cartilage damage in patients with symptomatic dysplasia and femoroacetabular impingement. Discrete element analysis was used to compute hip contact stresses during the stance phase of walking gait for 15 patients diagnosed with acetabular dysplasia and femoral head-neck offset deformity. Contact stresses were summed over the duration of the walking gait cycle and then scaled by patient age to obtain a measure of chronic cartilage contact stress exposure. Linear regression analysis was used to evaluate the relationship between contact stress exposure and cartilage damage in each of six acetabular subregions that had been evaluated arthroscopically for cartilage damage at the time of surgical intervention. A significant correlation (R2  = 0.423, p < 0.001) was identified between chondromalacia grade and chronic stress-time exposure above both a 1 MPa damage threshold and a 2 MPa-years accumulated damage threshold. Furthermore, an over-exposure threshold of 15% regional contact area exceeding the 1 and 2 MPa-years threshold values resulted in correct identification of cartilage damage in 83.3% (55/66) of the acetabular subregions loaded during gait. These results suggest corrective surgery to alleviate impingement and reduce chronic contact stress exposures below these damage-inducing thresholds could mitigate further cartilage damage in patients with hip dysplasia.

Effect of modeling femoral version and head-neck offset correction on computed contact mechanics in dysplastic hips treated with periacetabular osteotomy

While correction of dysplastic acetabular deformity has been a focus of both clinical treatment and research, concurrent femoral deformities have only more recently received serious attention. The purpose of this study was to determine how including abnormalities in femoral head-neck offset and femoral version alter computationally derived contact stresses in patients with combined dysplasia and femoroacetabular impingement (FAI). Hip models with patient-specific bony anatomy were created from preoperative and postoperative CT scans of 20 hips treated with periacetabular osteotomy and femoral osteochondroplasty. To simulate performing only a PAO, a third model was created combining each patient's postoperative pelvis and preoperative femur geometry. These three models were initialized with the femur in two starting orientations: (1) standardized template orientation, and (2) using patient-specific anatomic landmarks. Hip contact stresses were computed in all 6 model sets during an average dysplastic gait cycle, an average FAI gait cycle, and an average stand-to-sit activity using discrete element analysis. No significant differences in peak contact stress (p = 0.190 to 1), mean contact stress (p = 0.273 to 1), or mean contact area (p = 0.050 to 1) were identified during any loading activity based on femoral alignment technique or inclusion of femoral osteochondroplasty. These findings suggest that presence of abnormal femoral version and/or head-neck offset deformities are not themselves predominant factors in intra-articular contact mechanics during gait and stand-to-sit activities. Inclusion of modified movement patterns caused by these femoral deformities may be necessary for models to adequately capture the mechanical effects of these clinically recognized risk factors for negative outcomes.

Risk Factors for Composite Failure of Hip Dysplasia Treated With Periacetabular Osteotomy: A Minimum 10-Year Follow-up

INTRODUCTION

Periacetabular osteotomy (PAO) is a common surgical treatment of prearthritic hip dysplasia in young adults, but there are few long-term studies of clinical outcomes. The purpose of this investigation was to report a minimum 10-year clinical follow-up of hip dysplasia treated with PAO and identify risk factors for composite failure.

METHODS

We identified 151 patients (198 hips) who underwent PAO to treat hip dysplasia at a single institution. Enrolled subjects completed a series of six patient-reported outcome instruments and provided information about subsequent surgeries. We defined composite failure as conversion to total hip arthroplasty or modified Harris Hip Score ≤70. Logistic regression with generalized estimating equations was used to evaluate the relationships between odds of failure and potential predictor variables in univariate and multivariate analyses.

RESULTS

A total of 124 subjects (167 hips) with a minimum 10-year follow-up were enrolled. The median time from PAO to the final follow-up was 13 years (range 10-18 years). There were 71 hips that met criteria for failure: 32 with total hip arthroplasty and 39 with modified Harris Hip Score ≤70. Univariate logistic regression analyses revealed multiple preoperative factors that predicted composite failure: increased age and body mass index, osteoarthritis (OA), and more severe acetabular dysplasia. Postoperative factors that predicted failure included lateral undercoverage and formation of heterotopic ossification (HO). The final multivariate model identified body mass index ≥30 kg/m2 (odds ratio [OR], 3.84 [95% confidence interval (CI), 1.68-8.78], P = 0.001), higher preoperative Tönnis grade OA (OR, 2.65 [95% CI, 1.50-4.66], P < 0.001), and HO formation (OR, 16.52 [95% CI, 2.08-135.96], P = 0.009) as independent predictors of failure.

CONCLUSIONS

This study corroborates current hip dysplasia literature, identifying increasing age and presence of preoperative OA as risk factors for composite failure in univariate analyses. In addition, we found that obesity and HO formation were independent predictors of persistent hip dysfunction.

LEVEL OF EVIDENCE

Therapeutic Level IV.

Isolated changes in femoral version do not alter intra-articular contact mechanics in cadaveric hips

Abnormal femoral version is a deformity in the angle between the femoral neck and the transcondylar axis of the knee. Both femoral anteversion and retroversion alter passive and active rotation of the hip and are associated with intra-articular or extra-articular impingement. However, little is known about the effect of abnormal femoral version on intra-articular hip contact stresses. To quantify the effect of femoral version on hip contact stress, five cadaveric pelvis specimens were mechanically tested with a hip-specific Tekscan sensor inserted in the joint space. Specimens were oriented in a heel-strike position and loaded with 1000 N of compressive force. Pressure measurements were recorded by the Tekscan sensor with the femur oriented in 0°, 15°, and 30° of version. At the completion of testing, specimens were locked into place at 0° and post-test CT scans were obtained to register the pressure sensor measurements to the joint anatomy. There were minor changes in contact area (<7%) and translation of the peak contact stress location (8.8 ± 7.6 mm). There was no significant change in peak contact stress (p = 0.901) in either the retroverted (0°) or anteverted (30°) conditions relative to normal version (15°) under identical gait-related loading conditions. While abnormalities in patient gait and resultant joint loading caused by femoral version abnormalities may contribute to hip pain, the present findings would suggest that future joint degeneration in hips with version abnormalities are not simply the result of abnormal contact stress induced by joint incongruity due to femoral version abnormalities.