Successive determination of copper and iron by a flow injection-catalytic photometric method using a serial flow cell

Selective and sensitive spectrophotometric method to determine trace amounts of copper metal ions using Amaranth food dye

Copper is an essential element in some biological processes in organisms, so it was important to find ways to identify trace amounts of it. Minimal amounts of copper ions can be determined in aqueous solutions in the spectrophotometric method suggested in this study. The method depends on the reaction between Cu(II) and Amaranth dye at the pH 6.0. The gradual disappearance of Amaranth colour at 520 nm occurring with an increase of Cu(II) concentration from 0.13 up to 2.0 μg cm^-3. The molar absorptivity coefficient and Sandell's sensitivity of the complex are found to be 0.94 × 10⁴ L mol^-1 cm^-1, 6.8 ng cm^-2 respectively. The advantages of this method are simple, selective, and highly sensitive. The method was used for determination of copper ions in aqueous solutions containing several metal ions, where excellent agreements between reported and obtained results were achieved in aqueous solutions containing copper metal ions only. The postulated method is in an excellent agreement with the determination of Cu(II) ion concentrations by atomic absorption spectroscopy (AAS). The interference was studied to determine the copper metal ions concentration, and do not interfere with eleven of other metal ions.

Continuous flow analysis combined with a light-absorption ratio variation approach for determination of copper at ng/ml level in natural water

The complexation between Cu(II) and naphthochrome green (NG) is very sensitive at pH 4.09 with the formation of complex ion [Cu(NG)2(H2O)2](2-). It can thus used for the determination of Cu(II) by the light-absorption ratio variation approach (LARVA) with a good selectivity. Both the ordinary detection procedure and continuous flow analysis (CFA) were carried out, where the latter is fit for continuous and rapid analysis of samples. The limit of detection (LOD) of Cu(II) is only 1 ng/ml, which is favorable for direct monitoring of natural water. About 30 samples could be analyzed per hour by CFA. Cu(II) contents in Yangtze River, West Lake, Taihu Lake of China and seawater near Shanghai were determined with satisfactory results. The CFA-LARVA spectrophotometry was the first to be coupled and it will play an important role in the in-situ analysis of natural water quality.

Sequential determination of trace amounts of iron and copper in water samples by flow injection analysis with catalytic spectrophotometric detection

A simple flow injection analysis (FIA) method is described for the sequential determination of iron and copper. The detection method for iron and copper is based on their catalytic activities in the oxidation reaction of N,N-dimethyl-p-phenylenediamine (DPD) with hydrogen peroxide. The sequential determination of iron and copper can be carried out by injecting two sample plugs into the FIA system, sequentially. One injection does not contain triethylenetetramine (TETA), and is used for the sum of iron and copper concentration; the other which contains TETA is used only for the iron concentration. For iron determination, TETA is used as a masking agent of copper. The difference in peak height can be used for the calculation of copper concentration. Under the optimal conditions, the detection limits (3sigma) of 0.01 and 0.07 microg L(-1) were obtained for iron and copper, respectively. The proposed method can be applied to the determination of iron and copper in tap water and bottled-drinking mineral water samples. Good recoveries of the method, 98-103% for iron and 98-106% for copper, were achieved.

Simple Bead Injection-Flow Injection System for the Determination of Copper

We demonstrate the extended application of a simple bead injection-flow injection system with a modified simple colorimetric detection unit for the determination of low amount of Cu2+ in samples of different matrices (water and supplement tablet samples) with minimal sample pretreatment by employing ammonium pyrrolidinedithiocarbamate (APDC) reagent.