MnCo2O4 Spinel Nanorods for Highly Sensitive Electrochemical Detection of Nitrite

The rational design of nitrite sensors has attracted significant research interest due to their widespread use and the associated risks of methemoglobinemia and carcinogenicity. The undisclosed nitrite-sensing performance of the spinel cobaltite MnCo2O4 (MCO) prepared by an oxalate-assisted coprecipitation method is reported in this study. Spectroscopy and microscopy investigations revealed the formation of uniform MCO nanorods with a high aspect ratio. The electrocatalytic nitrite oxidation at the MCO-coated glassy carbon electrode (MCO/GCE) indicated the promising performance of the synthesized material for nitrite sensing. MCO/GCE detects nitrite in a concentration range of 5 μM to 3 mM and has a limit of detection of 0.95 μM with a higher sensitivity of 857 μA mM-1 cm-2 in a response time of 4 s. In MCO, the mixed-valence states of Co2+/Co3+ confer a high electrical conductivity, and higher valent redox couples of Mn and Co impart remarkable electrocatalytic activity toward nitrite oxidation. MCO spinel undergoes facile and ultrafast faradaic reactions to mediate nitrite oxidation. Additionally, the mesopores of MCO nanorods facilitate the rapid diffusion of electrolyte and nitrite ions. Employing the electrode in sensing nitrite in milk, lake, and tap water samples further validates its potential application in real-life testing. MCO spinel nanorods showcase promising scope for utilization in the electrochemical sensing of nitrite and inspire further exploration of transition-metal oxide-based mixed-spinel materials.

Development of electrochemical sensors for quick detection of environmental (soil and water) NPK ions

All over the world, technology is becoming more and more prevalent in agriculture. Different types of instruments are already being used in this sector. For the time being, every farmer is trying to produce more crops on a piece of land. Eventually, soil loses its nutrients; however, to grow more crops, farmers use more fertilizers without knowing the proper conditions of the soil in real time. To overcome this issue, many scientists have recently focused on developing electrochemical sensors to detect macronutrients, i.e., nitrogen (N), phosphorus (P), and potassium (K), in soil or water rapidly. In this review, we focus mainly on the recent developments in electrochemical sensors used for the detection of nutrients (NPK) in different types of samples. As it is outlined, the use of smart and portable electrochemical sensors can be helpful for the reduction of excess fertilizer and can play a vital role in maintaining suitable conditions in soils and water. We are optimistic that this review can guide researchers in the development of a portable and suitable NPK detection system for soil nutrients.

Electrochemical Sensor Based on Iron(II) Phthalocyanine and Gold Nanoparticles for Nitrite Detection in Meat Products

Nitrites are widely used in the food industry, particularly for the preservation of meat products. Controlling the nitrate content in food is an important task to ensure people's health is not at risk; therefore, the search for, and research of, new materials that will modify the electrodes in the electrochemical sensors that detect and control the nitrate content in food products is an urgent task. In this paper, we describe the electrochemical behavior of a glass carbon electrode (GCE), modified with a Fe(II) tetra-tert-butyl phthalocyanine film (FePc(tBu)₄/GCE), and decorated with gold nanoparticles (Au/FePc(tBu)₄/GCE); this electrode was deposited using gas-phase methods. The composition and morphology of such electrodes were examined using spectroscopy and electron microscopy methods, whereas the main electrochemical characteristics were determined using cyclic voltammetry (CV) and amperometry (CA) methods in the linear ranges of CV 0.25-2.5 mM, CA 2-120 μM in 0.1 M phosphate buffer (pH = 6.8). The results showed that the modification of bare GCEs, with a Au/FePc(tBu)₄ heterostructure, provided a high surface-to-volume ratio, thus ensuring its high sensitivity to nitrite ions of 0.46 μAμM^-1. The sensor based on the Au/FePc(tBu)₄/GCE has a low limit of nitrite detection at 0.35 μM, good repeatability, and stability. The interference study showed that the proposed Au/FePc(tBu)₄/GCE exhibited a selective response in the presence of interfering anions, and the analytical capability of the sensor was demonstrated by determining nitrite ions in real samples of meat products.

A highly sensitive poly(chrysoidine G)-gold nanoparticle composite based nitrite sensor for food safety applications

This work demonstrated the development of conducting poly(chrysoidine G) (PCG)-gold nanoparticle (AuNP)-modified fluorine-doped tin oxide (F : SnO₂, FTO) film-coated glass electrodes for the sensitive electrochemical detection of nitrite (NO₂^-). The homogeneously distributed PCG nanoparticle layer was deposited onto the FTO electrode by cyclic voltammetry sweeping. AuNPs were then anchored onto the PCG/FTO electrode by the chemical reduction of pre-adsorbed Au³⁺ ions. The as-prepared AuNP/PCG/FTO electrode exhibited excellent electrocatalytic activity for the oxidation of NO₂^- with high sensitivity (approximately 0.63 μA cm^-2μM^-1) and a low limit of detection (0.095 μM), which is relevant within the normal concentration range of NO₂^- in human bodily fluids. The AuNP/PCG/FTO sensor showed sufficient reproducibility, repeatability, low interference, and strong recovery for NO₂^- detection in food samples. These results indicate that the AuNP/PCG nanocomposites have immense potential for the electrochemical detection of other biologically important compounds.

Homopolymerization of 3-aminobenzoic acid for enzyme-free electrocatalytic assay of nitrite ions

We describe non-enzymatic novel detection of nitrite ions in various matrices on the surface of poly-3-aminobenzoic acid.

Facile synthesis of Co3O4 disordered circular sheets for selective electrochemical determination of nitrite

The electrochemical nitrite sensing properties of a cobalt oxide (Co₃O₄) modified glassy carbon electrode were investigated.

Counting the number of enzymes immobilized onto a nanoparticle-coated electrode

To immobilize enzymes at the surface of a nanoparticle-based electrochemical sensor is a common method to construct biosensors for non-electroactive analytes. Studying the interactions between the enzymes and nanoparticle support is of great importance in optimizing the conditions for biosensor design. This can be achieved by using a combination of analytical methods to carefully characterize the enzyme nanoparticle coating at the sensor surface while studying the optimal conditions for enzyme immobilization. From this analytical approach, it was found that controlling the enzyme coverage to a monolayer was a key factor to significantly improve the temporal resolution of biosensors. However, these characterization methods involve both tedious methodologies and working with toxic cyanide solutions. Here we introduce a new analytical method that allows direct quantification of the number of immobilized enzymes (glucose oxidase) at the surface of a gold nanoparticle coated glassy carbon electrode. This was achieved by exploiting an electrochemical stripping method for the direct quantification of the density and size of gold nanoparticles coating the electrode surface and combining this information with quantification of fluorophore-labeled enzymes bound to the sensor surface after stripping off their nanoparticle support. This method is both significantly much faster compared to previously reported methods and with the advantage that this method presented is non-toxic.

Graphical abstract

Methods for the detection and determination of nitrite and nitrate: A review

Various techniques for the determination of nitrite and/or nitrate developed during the past 15 years were reviewed in this article. 169 references were covered. The detection principles and analytical parameters such as matrix, detection limits and detection range of each method were tabulated. The advantages and disadvantages of various methods were evaluated. In comparison to other methods, spectrofluorimetric methods have become more attractive due to its facility availability, high sensitivity and selectivity, low limits of detection and low-cost.

Hydrophobicity effects in iron polypyridyl complex electrocatalysis within Nafion thin-film electrodes

Four polypyridyl redox catalysts Fe(bp)₃²⁺, Fe(ph)₃²⁺, Fe(dm)₃²⁺, and Fe(tm)₃²⁺ (with bp, ph, dm, and tm representing 2,2′-bipyridine, 1,10-phenanthroline, 4,4′-dimethyl-2,2′-bipyridine, and 3,4,7,8-tetramethyl-1,10-phenanthroline, respectively) are investigated for the electrocatalytic oxidation of three analytes (nitrite, arsenite, and isoniazid).

A non-covalent interaction of Schiff base copper alanine complex with green synthesized reduced graphene oxide for highly selective electrochemical detection of nitrite

A novel and selective nitrite sensor based on non-covalent interaction of Schiff base copper complex [Cu(sal-ala)(phen)] with reduced graphene oxide (RGO) was developed by simple eco-friendly approach.

Electrochemical response of nitrite and nitric oxide on graphene oxide nanoparticles doped with Prussian blue (PB) and Fe2O3 nanoparticles

Electrocatalytic behaviour of graphene oxide (GO), iron(iii) oxide (Fe₂O₃) and Prussian blue (PB) nanoparticles towards nitrite (NO₂⁻) and nitric oxide (NO) oxidation was investigated on a platinum modified electrode.

Tuning the direct growth of Agseeds into bimetallic Ag@Cu nanorods on surface functionalized electrochemically reduced graphene oxide: enhanced nitrite detection

The significant challenges in the growth of 1D nanostructure on reduced graphene oxide surface were addressed. It enabled the electrooxidation of the nitrite ion (NO₂⁻) with high sensitivity and good detection limit of 1 nM.

The influence of gold nanoparticles on the electroactivity of nickel tetrasulfonated phthalocyanine

We report on the electrodeposition of gold nanoparticles ( AuNPs ) on a glassy carbon electrode (GCE) followed by deposition of nickel tetrasulfonated phthalocyanine ( NiTSPc ) film by electropolymerization (poly- NiTSPc -GCE) to form Poly- NiTSPc / AuNPs -GCE. The presence of the gold nanoparticles caused a lowering of the anodic and cathodic peak separation (ΔE p ) of ferricyanide from 126 mV on poly- NiTSPc to 110 mV on poly- NiTSPc / AuNPs . The electrooxidation of nitrite improved on modified electrodes compared to GCE, with the latter giving E p = 0.78 V and the modified electrodes gave E p = 0.62 V or 0.61 V. Poly- NiTSPc / AuNPs -GCE had higher currents compared to poly- NiTSPc -GCE. This indicates the enhancement effect caused by the AuNPs . Electrochemical impedance spectroscopy and chronoamperometric studies also showed that poly- NiTSPc / AuNPs -GCE was a better electrocatalyst than poly- NiTSPc -GCE or AuNPs -GCE.

A joint experimental and computational search for authentic nano-electrocatalytic effects: electrooxidation of nitrite and L-ascorbate on gold nanoparticle-modified glassy carbon electrodes

The investigation of electrocatalytic nanoeffects is tackled via joint electrochemical measurements and computational simulations. The cyclic voltammetry of electrodes modified with metal nanoparticles is modeled considering the kinetics of the electrochemical process on the bulk materials of the different regions of the electrode, that is, the substrate (glassy carbon) and the nanoparticles (gold). Comparison of experimental and theoretical results enables the detection of changes in the electrode kinetics at the nanoscale due to structural and/or electronic effects. This approach is applied to the experimental assessment of electrocatalytic effects by gold nanoparticles (Au NPs) in the electrooxidation of nitrite and L-ascorbate. Glassy carbon electrode is modified with Au NPs via seed-mediated growth method. Divergence between the kinetics of these processes on gold macroelectrodes and gold nanoparticles is examined. Whereas claimed catalytic effects are not observed in the electrooxidation of nitrite, electrocatalytic nanoeffects are verified in the case of L-ascorbate. This is probably due to that the electron transfer process follows an adsorptive mechanism. The combination of simulation with experiments is commended as a general strategy of authentification, or not, of nanoelectrocatalytic effects.

Surface observation for seed-mediated growth attachment of gold nanoparticles on a glassy carbon substrate

A seed-mediated growth method for surface modification was applied to the attachment of gold nanoparticles (AuNPs) to glassy carbon (GC) surfaces. By simply immersing a GC plate at first into a seed solution containing 4 nm Au nano-seed particles and then into a growth solution containing HAuCl(4), ascorbic acid and cetyltrimethyammonium bromide, AuNPs could be successfully attached to the GC surface via the growth of nanoparticles. A possible control of the size and density of AuNPs on GC was examined by observing surface images with a field-emission scanning electron microscope (FE-SEM) after several preparations with different immersion times. Compared with previous results on the growth of AuNPs on indium tin oxide (ITO) surfaces, it was characteristic that the AuNPs attached to GC surfaces exhibited smaller size and higher density as well as a flatter and non-crystal-like morphology. In addition, for performing the dense attachment of regular nano-sized AuNPs on GC surfaces, immersion for 2 h into the growth solution was sufficient. Longer immersion for 24 h caused an irregular growth of bold Au micro-crystals, while 24 h was necessary in the case of AuNPs on ITO surfaces. Shorter seeding and growth times were found to be effective for a sparse attachment of smaller Au nanoparticles whose size was ca. 20 nm. It was clarified that the seed-mediated growth method for surface modification was valid for fabricating a nanointerface composed of AuNPs on GC surfaces.