Modification of gold nanoparticle loaded on activated carbon with bis(4-methoxysalicylaldehyde)-1,2-phenylenediamine as new sorbent for enrichment of some metal ions

In this study, a new sorbent based on the gold nanoparticle loaded in activated carbon (Au-NP-AC) was synthesized and modified by bis(4-methoxy salicylaldehyde)-1,2-phenylenediamine (BMSAPD). This sorbent, which is abbreviated as Au-NP-AC-BMSAPD, has been applied for the enrichment and preconcentration of trace amounts of Co(2+), Cu(2+), Ni(2+), Fe(2+), Pb(2+), and Zn(2+) ions in real samples. All metal ions under study were retained on the Au-NP-AC-BMSAPD sorbent by complexation of the ions with the BMSAPD ligand, providing an efficient preconcentration fashion. The retained metal ions were then eluted from the sorbent by HNO(3) and detected by flame atomic absorption spectrometry. The analytical parameters including pH, amount of ligand, and the nature of the eluent and solid phase were evaluated to obtain the optimum condition for the preconcentration factor. Following the optimum conditions, a preconcentration factor of 200 was obtained for all the metal ions under study with detection limits of 1.4-2.6 ng mL(-1). The method has been successfully applied for the extraction and determination of the ion content in the same real samples with recoveries in the range of 95-99.6% and a relative standard deviation lower than 4.0%.

Preconcentration-separation of Co2+, Ni2+, Cu2+ and Cd2+ in real samples by solid phase extraction of a calix[4] resorcinarene modified Amberlite XAD-16 resin

A new method is described for the simultaneous preconcentration of trace metal ions. The method is based on the adsorption of Co(2+), Ni(2+), Cu(2+) and Cd(2+) ions on 2,4,6,8-tetra(2-hydroxyphenyl)-1,3,5,7(1,3)tetrabenzenzcyclooctaphane-14,16,34,36,54, 56,74,76-octol (salicylaldehyde calix[4] resorcinarenes) (new resorcinarenes derivative) modified on Amberlite XAD-16. The adsorbed analyte ions were eluted with 6 mL 3M HCl in acetone solution, which then were determined by atomic absorption spectroscopy. The influences of the analytical parameters including pH, ligand amount and solid phase ingredient, eluting solution conditions and sample volume were investigated. Common coexisting ions did not interfere with the separation and determination. The preconcentration factor is 208. The sorbent exhibited excellent stability and its sorption capacity under optimum conditions has been found to be more than 60 microg of ions per gram of sorbent. The relative standard deviation under optimum conditions is lower than 4.10%. The accuracy of the method was estimated by using different real samples.