AFM studies of cellular mechanics during osteogenic differentiation of human amniotic fluid-derived stem cells

Single-Cell Mechanics: Structural Determinants and Functional Relevance

The mechanical phenotype of a cell determines its ability to deform under force and is therefore relevant to cellular functions that require changes in cell shape, such as migration or circulation through the microvasculature. On the practical level, the mechanical phenotype can be used as a global readout of the cell's functional state, a marker for disease diagnostics, or an input for tissue modeling. We focus our review on the current knowledge of structural components that contribute to the determination of the cellular mechanical properties and highlight the physiological processes in which the mechanical phenotype of the cells is of critical relevance. The ongoing efforts to understand how to efficiently measure and control the mechanical properties of cells will define the progress in the field and drive mechanical phenotyping toward clinical applications.

Changes in the mechanical properties of human mesenchymal stem cells during differentiation

A thorough understanding of the changes in mechanical property behind intracellular biophysical and biochemical processes during differentiation of human mesenchymal stem cells (hMSCs) is helpful to direct and enhance the commitment of cells to a particular lineage. In this study, displacement creep of the mesenchymal cell lineages (osteogenic, chondrogenic and adipogenic hMSCs) were determined by using atomic force microscopy, which was then used to determine their mechanical properties. We found that at any stages of differentiation, the mesenchymal cell lineages are linear viscoelastic materials and well matched with a simple power-law creep compliance. In addition, the viscoelasticity of mesenchymal cell lineages showed different trends during differentiation. The adipogenic hMSCs showed continuous softening at all stages. The osteogenic and chondrogenic hMSCs only continuously soften and become more fluid-like in the early stage of differentiation, and get stiffened and less fluid-like in the later stage. These findings will help more accurately imitate cellular biomechanics in the microenvironment, and provided an important reference in the biophysics biomimetic design of stem cell differentiation.

Nanoindentation of mesenchymal stem cells using atomic force microscopy: effect of adhesive cell-substrate structures

The procedure commonly adopted to characterize cell materials using atomic force microscopy neglects the stress state induced in the cell by the adhesion structures that anchor it to the substrate. In several studies, the cell is considered as made from a single material and no specific information is provided regarding the mechanical properties of subcellular components. Here we present an optimization algorithm to determine separately the material properties of subcellular components of mesenchymal stem cells subjected to nanoindentation measurements. We assess how these properties change if the adhesion structures at the cell-substrate interface are considered or not in the algorithm. In particular, among the adhesion structures, the focal adhesions and the stress fibers were simulated. We found that neglecting the adhesion structures leads to underestimate the cell mechanical properties thus making errors up to 15%. This result leads us to conclude that the action of adhesion structures should be taken into account in nanoindentation measurements especially for cells that include a large number of adhesions to the substrate.

Coarse-grained elastic network modelling: A fast and stable numerical tool to characterize mesenchymal stem cells subjected to AFM nanoindentation measurements

The knowledge of the mechanical properties is the starting point to study the mechanobiology of mesenchymal stem cells and to understand the relationships linking biophysical stimuli to the cellular differentiation process. In experimental biology, Atomic Force Microscopy (AFM) is a common technique for measuring these mechanical properties. In this paper we present an alternative approach for extracting common mechanical parameters, such as the Young's modulus of cell components, starting from AFM nanoindentation measurements conducted on human mesenchymal stem cells. In a virtual environment, a geometrical model of a stem cell was converted in a highly deformable Coarse-Grained Elastic Network Model (CG-ENM) to reproduce the real AFM experiment and retrieve the related force-indentation curve. An ad-hoc optimization algorithm perturbed the local stiffness values of the springs, subdivided in several functional regions, until the computed force-indentation curve replicated the experimental one. After this curve matching, the extraction of global Young's moduli was performed for different stem cell samples. The algorithm was capable to distinguish the material properties of different subcellular components such as the cell cortex and the cytoskeleton. The numerical results predicted with the elastic network model were then compared to those obtained from hertzian contact theory and Finite Element Method (FEM) for the same case studies, showing an optimal agreement and a highly reduced computational cost. The proposed simulation flow seems to be an accurate, fast and stable method for understanding the mechanical behavior of soft biological materials, even for subcellular levels of detail. Moreover, the elastic network modelling allows shortening the computational times to approximately 33% of the time required by a traditional FEM simulation performed using elements with size comparable to that of springs.

A case report on filamin A gene mutation and progressive pulmonary disease in an infant: A lung tissued derived mesenchymal stem cell study

RATIONALE

Mesenchymal stem cells (MSC) play a crucial role in both the maintenance of pulmonary integrity and the pathogenesis of lung disease. Lung involvement has been reported in patients with the filamin A (FLNA) gene mutation. Considering FLNA's role in the intrinsic mechanical properties of MSC, we characterized MSCs isolated from FLNA-defective lung tissue, in order to define their pathogenetic role in pulmonary damage.

PATIENT CONCERNS

A male infant developed significant lung disease resulting in emphysematous lesions and perivascular and interstitial fibrosis. He also exhibited general muscular hypotonia, bilateral inguinal hernia, and deformities of the lower limbs (pes tortus congenitalis and hip dysplasia). Following lobar resection, chronic respiratory failure occurred.

DIAGNOSIS

Genetic testing was performed during the course of his clinical care and revealed a new pathogenic variant of the FLNA gene c.7391_7403del; (p.Val2464AlafsTer5). Brain magnetic resonance imaging revealed periventricular nodular heterotopia.

INTERVENTIONS AND OUTCOMES

Surgical thoracoscopic lung biopsy was performed in order to obtain additional data on the pathological pulmonary features. A small portion of the pulmonary tissue was used for MSC expansion. Morphology, immunophenotype, differentiation capacity, and proliferative growth were evaluated. Bone marrow-derived mesenchymal stem cells (BM-MSC) were employed as a control. MSCs presented the typical MSC morphology and phenotype while exhibiting higher proliferative capacity (P <.001) and lower migration potential (P=.02) compared to control BM-MSC.

LESSONS

The genetic profile and altered features of the MSCs isolated from FLNA-related pediatric lung tissue could be directly related to defects in cell migration during embryonic lung development and pulmonary damage described in FLNA-defective patients.

Quantifying the ultrastructure changes of air-dried and irradiated human amniotic membrane using atomic force microscopy: a preliminary study

Air-dried and sterilized amnion has been widely used as a dressing to treat burn and partial thickness wounds. Sterilisation at the standard dose of 25 kGy was reported to cause changes in the morphological structure as observed under the scanning electron microscope. This study aimed to quantify the changes in the ultrastructure of the air-dried amnion after gamma-irradiated at several doses by using atomic force microscope. Human placentae were retrieved from mothers who had undergone cesarean elective surgery. Amnion separated from chorion was processed and air-dried for 16 h. It was cut into 10 × 10 mm, individually packed and exposed to gamma irradiation at 5, 15, 25 and 35 kGy. Changes in the ultrastructural images of the amnion were quantified in term of diameter of the epithelial cells, size of the intercellular gap and membrane surface roughness. The longest diameter of the amnion cells reduced significantly after radiation (p < 0.01) however the effect was not dose dependent. No significant changes in the shortest diameter after radiation, except at 35 kGy which decreased significantly when compared to 5 kGy (p < 0.01). The size of the irradiated air-dried amnion cells reduced in the same direction without affecting the gross ultrastructure. At 15 kGy the intercellular gap decreased significantly (p < 0.01) with Ra and Rq, values reflecting surface roughness, were significantly the highest (p < 0.01). Changes in the ultrastructure quantified by using atomic force microscope could complement results from other microscopic techniques.

Morphological and Mechanical Properties of Osteosarcoma Microenvironment Cells Explored by Atomic Force Microscopy

Cell mechanical properties that depend on cytoskeleton architecture are critical to the mechanotransduction process, and have great potential for cancer diagnosis and therapy. In this study, the morphological and mechanical properties of typical osteosarcoma microenvironment cells, including mesenchymal stem cells (MSC), normal human osteoblast cells (NHOst) and osteosarcoma cells (MG-63), were compared using atomic force microscopy (AFM). The MG-63 cells were smaller and thicker than the MSC and NHOst cells. The membrane roughness of MG-63 cells was higher than that of MSC and NHOst cells. The MG-63 cells had lower stiffness than their normal counterparts due to their reduced organization of the cytoskeleton structure. The cell stiffness influenced the mechanotransduction. The MG-63 cells had a lower percentage of nuclear YAP/TAZ compared with the MSC and NHOst cells. The F-actin assembly was disrupted by the cytochalasin D (cyto D) treatment used to investigate its influence on mechanotransduction. Disruption of the cytoskeleton leaded to a decrease of the cell stiffness, and reduced the nuclear YAP/TAZ percentage, indicating its inhibition in the cell mechanotransduction process. This study would shed light on the development of a novel cancer diagnosis strategy and would contribute to reveal the relationship between the cytoskeleton structure and the cell mechanical properties.

Single-cell mechanical phenotype is an intrinsic marker of reprogramming and differentiation along the mouse neural lineage

Cellular reprogramming is a dedifferentiation process during which cells continuously undergo phenotypical remodeling. Although the genetic and biochemical details of this remodeling are fairly well understood, little is known about the change in cell mechanical properties during the process. In this study, we investigated changes in the mechanical phenotype of murine fetal neural progenitor cells (fNPCs) during reprogramming to induced pluripotent stem cells (iPSCs). We find that fNPCs become progressively stiffer en route to pluripotency, and that this stiffening is mirrored by iPSCs becoming more compliant during differentiation towards the neural lineage. Furthermore, we show that the mechanical phenotype of iPSCs is comparable with that of embryonic stem cells. These results suggest that mechanical properties of cells are inherent to their developmental stage. They also reveal that pluripotent cells can differentiate towards a more compliant phenotype, which challenges the view that pluripotent stem cells are less stiff than any cells more advanced developmentally. Finally, our study indicates that the cell mechanical phenotype might be utilized as an inherent biophysical marker of pluripotent stem cells.

Menaquinone-4 enhances osteogenic potential of human amniotic fluid mesenchymal stem cells cultured in 2D and 3D dynamic culture systems

Menaquinones, also known as Vitamin K2 family, regulate calcium homeostasis in a 'bone-vascular cross-talk' and recently received particular attention for their positive effect on bone formation. Given that the correlation between menaquinones and bone metabolism to date is still unclear, the objective of our study was to investigate the possible role of menaquinone-4 (MK-4), an isoform of the menaquinones family, in the modulation of osteogenesis. For this reason, we used a model of human amniotic fluid mesenchymal stem cells (hAFMSCs) cultured both in two-dimensional (2D) and three-dimensional (3D; RCCS™bioreactor) in vitro culture systems. Furthermore, to mimic the 'bone remodelling unit' in vitro, hAFMSCs were co-cultured in the 3D system with human monocyte cells (hMCs) as osteoclast precursors. The results showed that in a conventional 2D culture system, hAFMSCs were responsive to the MK-4, which significantly improved the osteogenic process through γ-glutamyl carboxylase-dependent pathway. The same results were obtained in the 3D dynamic system where MK-4 treatment supported the osteoblast-like formation promoting the extracellular bone matrix deposition and the expression of the osteogenic-related proteins (alkaline phosphatase, osteopontin, collagen type-1 and osteocalcin). Notably, when the hAFMSCs were co-cultured in a 3D dynamic system with the hMCs, the presence of MK-4 supported the cellular aggregate formation as well as the osteogenic function of hAFMSCs, but negatively affected the osteoclastogenic process. Taken together, our results demonstrate that MK-4 supported the aggregate formation of hAFMSCs and increased the osteogenic functions. Specifically, our data could help to optimize bone regenerative medicine combining cell-based approaches with MK-4 treatment.

Atomic Force Microscopy in Characterizing Cell Mechanics for Biomedical Applications: A Review

Cell mechanics is a novel label-free biomarker for indicating cell states and pathological changes. The advent of atomic force microscopy (AFM) provides a powerful tool for quantifying the mechanical properties of single living cells in aqueous conditions. The wide use of AFM in characterizing cell mechanics in the past two decades has yielded remarkable novel insights in understanding the development and progression of certain diseases, such as cancer, showing the huge potential of cell mechanics for practical applications in the field of biomedicine. In this paper, we reviewed the utilization of AFM to characterize cell mechanics. First, the principle and method of AFM single-cell mechanical analysis was presented, along with the mechanical responses of cells to representative external stimuli measured by AFM. Next, the unique changes of cell mechanics in two types of physiological processes (stem cell differentiation, cancer metastasis) revealed by AFM were summarized. After that, the molecular mechanisms guiding cell mechanics were analyzed. Finally the challenges and future directions were discussed.

Differentiation Potential of Mesenchymal Stem Cells Is Related to Their Intrinsic Mechanical Properties

PURPOSE

The differentiation properties of stem cells are not yet fully understood due to their close association with multiple environmental and extrinsic factors. This study investigates the differentiation properties of mesenchymal stem cells (MSCs) and correlates them with their intrinsic mechanical properties.

METHODS

A total of 3 different types of MSCs, namely bone marrow-derived MSCs (BMSCs), umbilical cord-derived MSCs (UCSCs), and adipose-derived MSCs (ADSCs) were evaluated. These 3 MSCs were individually differentiated into adipocytes and osteoblasts for 3 weeks. The mechanical properties of the MSCs and differentiated cells were determined by atomic force microscopy.

RESULTS

ADSCs showed the greatest ability to differentiate into adipocytes, followed by BMSCs and UCSCs. While UCSCs differentiated readily into osteoblasts, BMSCs and ADSCs were less likely to undergo this differentiation. UCSCs were the "hardest" cells, while ADSCs were the "softest." The cells differentiated from "hard" MSCs were stiffer than the cells differentiated from "soft" MSCs, irrespective of lineage specification.

CONCLUSIONS

The differentiation ability of MSCs and the mechanical properties of the differentiated cells were closely linked. However, there were no significant correlations regarding changes in the mechanical properties between the nuclear region and the cytoplasm during differentiation.

The effect of equiaxial stretching on the osteogenic differentiation and mechanical properties of human adipose stem cells

Although mechanical cues are known to affect stem cell fate and mechanobiology, the significance of such stimuli on the osteogenic differentiation of human adipose stem cells (hASCs) remains unclear. In this study, we investigated the effect of long-term mechanical stimulation on the attachment, osteogenic differentiation and mechanical properties of hASCs. Tailor-made, pneumatic cell stretching devices were used to expose hASCs to cyclic equiaxial stretching in osteogenic medium. Cell attachment and focal adhesions were visualised using immunocytochemical vinculin staining on days 3 and 6, and the proliferation and alkaline phosphatase activity, as a sign of early osteogenic differentiation, were analysed on days 0, 6 and 10. Furthermore, the mechanical properties of hASCs, in terms of apparent Young's modulus and normalised contractility, were obtained using a combination of atomic force microscopy based indentation and computational approaches. Our results indicated that cyclic equiaxial stretching delayed proliferation and promoted osteogenic differentiation of hASCs. Stretching also reduced cell size and intensified focal adhesions and actin cytoskeleton. Moreover, cell stiffening was observed during osteogenic differentiation and especially under mechanical stimulation. These results suggest that cyclic equiaxial stretching modifies cell morphology, focal adhesion formation and mechanical properties of hASCs. This could be exploited to enhance osteogenic differentiation.

Label-free biomarkers of human embryonic stem cell differentiation to hepatocytes

Four different label-free, minimally invasive, live single cell analysis techniques were applied in a quantitative comparison, to characterize embryonic stem cells and the hepatocytes into which they were differentiated. Atomic force microscopy measures the cell's mechanical properties, Raman spectroscopy measures its chemical properties, and dielectrophoresis measures the membrane's capacitance. They were able to assign cell type of individual cells with accuracies of 91% (atomic force microscopy), 95.5% (Raman spectroscopy), and 72% (dielectrophoresis). In addition, stimulated Raman scattering (SRS) microscopy was able to easily identify hepatocytes in images by the presence of lipid droplets. These techniques, used either independently or in combination, offer label-free methods to study individual living cells. Although these minimally invasive biomarkers can be applied to sense phenotypical or environmental changes to cells, these techniques have most potential in human stem cell therapies where the use of traditional biomarkers is best avoided. Destructive assays consume valuable stem cells and do not characterize the cells which go on to be used in therapies; whereas immunolabeling risks altering cell behavior. It was suggested how these four minimally invasive methods could be applied to cell culture, and how they could in future be combined into one microfluidic chip for cell sorting. © 2016 International Society for Advancement of Cytometry.

Wnt signaling behaves as a "master regulator" in the osteogenic and adipogenic commitment of human amniotic fluid mesenchymal stem cells

Human amniotic fluid mesenchymal stem cells (huAFMSCs) are emerging as a promising therapeutic option in regenerative medicine. Here, we characterized huAFMSC phenotype and multipotentiality. When cultured in osteogenic medium, huAFMSC displayed a significant increase in: Alkaline Phosphatase (ALP) activity and mRNA expression, Alizarin Red S staining and Runx2 mRNA expression; whereas maintaining these cells in an adipogenic culture medium gave a time-dependent increase in PPARγ and FABP4 mRNA expression, glycerol-3-phosphate dehydrogenase (GPDH) activity and positivity to Oil Red Oil staining. These results confirm that huAFMSCs can differentiate toward osteogenic and adipogenic phenotypes. The canonical Wnt/ßcatenin signaling pathway appears to trigger huAFMSC osteoblastogenesis, since during early phases of osteogenic differentiation, the expression of Dishevelled-2 (Dvl-2), of the non-phosphorylated form of ß-catenin, and the phosphorylation of glycogen synthase kinase-3ß (GSK3ß) at serine 9 were upregulated. On the contrary, during adipogenic differentiation Dvl-2 expression decreased, whereas that of ß-catenin remained unchanged. This was associated with a late increase in GSK3ß phosphorylation. Consistent with this scenario, huAFMSCs exposure to Dickkopf-1, a selective inhibitor of the Wnt signaling, abolished Runx2 and ALP mRNA upregulation during huAFMSC osteogenic differentiation, whereas it enhanced FABP4 expression in adipocyte-differentiating cells. Taken together, these results unravel novel molecular determinants of huAFMSC commitment towards osteoblastogenesis, which may represent potential targets for directing the differentiation of these cells and improving their use in regenerative medicine.

Figure

Mechanical stiffness as an improved single-cell indicator of osteoblastic human mesenchymal stem cell differentiation

Although it has been established that cellular stiffness can change as a stem cell differentiates, the precise relationship between cell mechanics and other phenotypic properties remains unclear. Inherent cell heterogeneity and asynchronous differentiation complicate population analysis; therefore, single-cell analysis was employed to determine how changes in cell stiffness correlate with changes in molecular biomarkers during differentiation. Design of a custom gridded tissue culture dish facilitated single-cell comparisons between cell mechanics and other differentiation biomarkers by enabling sequential measurement of cell mechanics and protein biomarker expression at the single cell level. The Young's modulus of mesenchymal stem cells was shown not only to decrease during chemically-induced osteoblast differentiation, but also to correlate more closely with the day of differentiation than did the relative expression of the traditional osteoblast differentiation markers, bone sialoprotein and osteocalcin. Therefore, cell stiffness, a measurable property of individual cells, may serve as an improved indicator of single-cell osteoblast differentiation compared to traditional biological markers. Revelation of additional osteoblast differentiation indicators, such as cell stiffness, can improve identification and collection of starting cell populations, with applications to mesenchymal stem cell therapies and stem cell-based tissue engineering.

Mechanical properties of human amniotic fluid stem cells using nanoindentation

The aim of this study was to obtain nanomechanical properties of living cells focusing on human amniotic fluid stem (hAFS) cell using nanoindentation techniques. We modified the conventional method of atomic force microscopy (AFM) in aqueous environment for cell imaging and indentation to avoid inherent difficulties. Moreover, we determined the elastic modulus of murine osteoblast (OB6) cells and hAFS cells at the nucleus and cytoskeleton using force-displacement curves and Hertz theory. Since OB6 cell line has been widely used, it was selected to validate and compare the obtained results with the previous research studies. As a result, we were able to capture high resolution images through utilization of the tapping mode without adding protein or using fixation methods. The maximum depth of indentation was kept below 15% of the cell thickness to minimize the effect of substrate hardness. Nanostructural details on the surface of cells were visualized by AFM and fluorescence microscopy. The cytoskeletal fibers presented remarkable increase in elastic modulus as compared with the nucleus. Furthermore, our results showed that the elastic modulus of hAFS cell edge (31.6 kPa) was lower than that of OB6 cell edge (42.2 kPa). In addition, the elastic modulus of nucleus was 13.9 kPa for hAFS cell and 26.9 kPa for OB6 cells. Differences in cell elastic modulus possibly resulted from the type and number of actin cytoskeleton organization in these two cell types.

Role of amniotic fluid mesenchymal cells engineered on MgHA/collagen-based scaffold allotransplanted on an experimental animal study of sinus augmentation

OBJECTIVES

The present research has been performed to evaluate whether a commercial magnesium-enriched hydroxyapatite (MgHA)/collagen-based scaffold engineered with ovine amniotic fluid mesenchymal cells (oAFMC) could improve bone regeneration process in vivo.

MATERIALS AND METHODS

Bilateral sinus augmentation was performed on eight adult sheep in order to compare the tissue regeneration process at 45 and 90 days after implantation of the oAFMC-engineered scaffold (Test Group) or of the scaffold alone (Ctr Group). The process of tissue remodeling was analyzed through histological, immunohistochemical, and morphometric analyses by calculating the proliferation index (PI) of oAFMC loaded on the scaffold, the total vascular area (VA), and vascular endothelial growth factor (VEGF) expression levels within the grafted area.

RESULTS

MgHA/collagen-based scaffold showed high biocompatibility preserving the survival of oAFMC for 90 days in grafted sinuses. The use of oAFMC increased bone deposition and stimulated a more rapid angiogenic reaction, thus probably supporting the higher cell PI recorded in cell-treated sinuses. A significantly higher VEGF expression (Test vs. Ctr Group; p = 0.0004) and a larger total VA (p = 0.0006) were detected in the Test Group at 45 days after surgery. The PI was significantly higher (p = 0.027) at 45 days and became significantly lower at 90 days (p = 0.0007) in the Test Group sinuses, while the PI recorded in the Ctr Group continued to increase resulting to a significantly higher PI at day 90 (CTR day 45 vs. CTR day 90; p = 0.022).

CONCLUSIONS

The osteoinductive effect of a biomimetic commercial scaffold may be significantly improved by the presence of oAFMC.

CLINICAL RELEVANCE

The amniotic fluid mesenchymal cell (AFMC) may represent a novel, largely and easily accessible source of mesenchymal stem cells to develop cell-based therapy for maxillofacial surgery.

The effect of nicotine on the mechanical properties of mesenchymal stem cells

PURPOSE: To measure the elasticity of the nucleus and cytoplasm of human mesenchymal stem cells (MSCs) as well as changes brought about by exposure to nicotine in vitro. METHODS: MSCs were synchronized to the G(0) stage of the cell cycle through serum deprivation techniques. The cells were then treated with medium containing nicotine (0.1 µM, 0.5 µM, and 1 µM). Atomic force microscopy was then used to measure the Young's modulus of both the nucleus and cytoplasm of these cells. RESULTS: For both unsynchronized and synchronized cells, the nucleus was softer than the cytoplasm, although this difference was not found to be statistically significant. The nucleus of cells treated with nicotine was significantly stiffer than the control for all concentrations. The cytoplasm was significantly stiffer in nicotine-treated cells than in control cells for the 0.5 µM and 1.0 µM concentrations only. CONCLUSIONS: The results of this study could suggest that nicotine affects the biophysical properties of human MSCs in a dose-dependent manner, which may render the cells less responsive to mechanoinduction and other physical stimuli.