Aptamer-based Resonance Light Scattering for Sensitive Detection of Acetamiprid

Recent Advances in Aptasensors for Rapid Pesticide Residues Detection

Pesticides are applied widely to increase agricultural output and quality, however, this practice results in residual issues that not only harm the environment but also put people and animals' lives and health at risk. As a result, it is critical to find pesticide residues in a variety of sources, including crops, water supplies, and soil. Aptamers are more flexible in their synthesis and modification, have a high level of specificity, are inexpensive, and have good stability compared to conventional detection methods. They have therefore attracted a lot of interest in the industry. This study reviews the most recent aptasensor advancements in the detection of pesticide residues. Firstly, aptamers specifically binding to many pesticides are summarized. Secondly, the combination of aptasensors with colorimetric, fluorescent, surface enhanced Raman spectroscopy (SERS), resonance Light Scattering (RLS), chemiluminescence (CL), electrochemical, and electrochemiluminescence (ECL) technologies are systematically introduced, and their advantages and disadvantages are expounded. Importantly, the aptasensors for the detection of various pesticides (organochlorine, organophosphorus, neonicotinoids, carbamates, and pyrethroids) that have been developed so far are systematically analyzed and discussed. Finally, the furture prospects and challenges of the aptasensors are highlighted. It is expected to offer suggestions for the later creation of novel, highly effective and sensitive aptasensors for the detection of pesticide residues.

Advanced screening and tailoring strategies of pesticide aptamer for constructing biosensor

The rapid development of aptamers has helped address the challenges presented by the wide existed pesticides contaminations. Screening of aptamers with excellent performance is a prerequisite for successfully constructing biosensors, while further tailoring of aptamers with enhanced activity greatly improved the assay performance. Firstly, this paper reviewed the advanced screening strategies for pesticides aptamers, including immobilization screening that preserves the native structures of targets, non-immobilized screening based on nanomaterials, capillary electrophoresis-systematic evolution of ligands by exponential enrichment (CE-SELEX), virtual screening in silico, high-throughput selection, and rational secondary library generation methods, which contributed significantly to improve the success rate of screening, reduce the screening time, and ensure aptamer binding affinity. Secondly, the precise tailoring strategies for pesticides aptamers were modularly elaborated, containing deletion, splitting, elongation, and fusion, which provided various advantages like cost-efficiency, enhanced binding affinity, and new derived functional motifs. Thirdly, the developed aptamer-based biosensors (aptasensors) for pesticide detection were systematically reviewed according to the different signal output modes. Finally, the challenges and future perspectives of pesticide detection are discussed comprehensively.

Highly sensitive and selective detection of butachlor based on the resonance light scattering of doped carbon quantum dots

In this work, a new method of resonance light scattering was developed for the sensitive and selective detection of butachlor. Firstly, buckwheat was used as the main carbon source to prepare a new type of doped carbon quantum dot using the hydrothermal method. A new method for the determination of butachlor was then established by the change in resonance light scattering intensity after the addition of butachlor into the doped carbon quantum dot solution. The detection effect was successfully optimized by investigating the optimum reaction conditions. Under the optimum conditions, the resonance light scattering intensity of doped carbon quantum dots was greatly enhanced at 460 nm after the addition of butachlor, and the intensity changes were linearly correlated with the butachlor concentration in the range of 1-7 μg L^-1. The detection limit was 0.136 μg L^-1, and the recoveries ranged between 98.6% and 101.8%. This method was also used for butachlor detection in environmental water.

A label-free Exonuclease I-assisted fluorescence aptasensor for highly selective and sensitive detection of silver ions

Based on the specific interaction of Ag⁺ and cytosine-cytosine (C-C) base mismatch and using berberine (Ber) as the fluorescent probe and Exonuclease I (Exo I) as the background fluorescence reducing tool, a label-free Exo I-assisted fluorescence aptamer sensing platform was established for the detection of silver ions with high sensitivity and selectivity. Exo I reduced the fluorescence background of the Ber/Ag⁺-aptamer complex to a level similar to that of Ber itself in the absence of Ag⁺. After introducing Ag⁺ into the sensing system, it induces the aptamer rich in base C to form C-Ag⁺-C i-motif structure which are resistant to degradation mediated by Exo I. The concentration of Ber, Ag⁺-aptamer, Exo I and the temperature and reaction time for Exo I were all optimized. Under the optimal experimental conditions, the detection limit of Ag⁺ was 4.4 nM and the linear range was from 0.0059 μM to 235.48 μM with a coefficient of determination (R²) > 0.99. Moreover, the proposed strategy had been successfully applied to the detection of Ag⁺ in tap water and human serum with a good recovery ranging from 88.4% to 106.9%.

Fluorescence method for kanamycin detection based on the conversion of G-triplex and G-quadruplex

A versatile fluorescence scaffold was constructed by connecting a G-triplex sequence (G31) with G-rich DNA (aptamer of kanamycin) and using thioflavin T (ThT) as the fluorescent molecule. With the assistance of an aptamer, the G-quadruplex DNA structure was fabricated using G31 as three strands and the aptamer as the fourth strand. Due to the parallel planar morphology of the final products, which was favorable for ThT binding and which restricted the rotation of the aromatic rings of ThT, the fluorescence signal intensity of ThT was significantly enhanced. Because of the specific interaction of aptamer and kanamycin, in addition to the greater ability for kanamycin to bind with G-triplex than ThT, the conformation of G-quadruplex DNA was changed; in addition, ThT was dissociated from the aptamer-G31, and therefore a 'turn-on' to 'turn-off' detection principle was applied for kanamycin detection, which yielded reasonable sensitivity and selectivity. The detection range was 50-2000 nM, with a limit of detection of 1.05 nM. Our proposed method was thus successfully applied for kanamycin determination in pork, chicken, and beef samples, and satisfactory results were obtained.

Pesticide Aptasensors-State of the Art and Perspectives

Contamination by pesticides in the food chain and the environment is a worldwide problem that needs to be actively monitored to ensure safety. Unfortunately, standard pesticide analysis based on mass spectrometry takes a lot of time, money and effort. Thus, simple, reliable, cost-effective and field applicable methods for pesticide detection have been actively developed. One of the most promising technologies is an aptamer-based biosensor or so-called aptasensor. It utilizes aptamers, short single-stranded DNAs or RNAs, as pesticide recognition elements to integrate with various innovative biosensing technologies for specific and sensitive detection of pesticide residues. Several platforms for aptasensors have been dynamically established, such as colorimetry, fluorometry, electrochemistry, electrochemiluminescence (ECL) and so forth. Each platform has both advantages and disadvantages depending on the purpose of use and readiness of technology. For example, colorimetric-based aptasensors are more affordable than others because of the simplicity of fabrication and resource requirements. Electrochemical-based aptasensors have mainly shown better sensitivity than others with exceedingly low detection limits. This paper critically reviews the progression of pesticide aptasensors throughout the development process, including the selection, characterization and modification of aptamers, the conceptual frameworks of integrating aptamers and biosensors, the ASSURED (affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free and deliverable to end users) criteria of different platforms and the future outlook.

Doped N/Ag Carbon Dot Catalytic Amplification SERS Strategy for Acetamiprid Coupled Aptamer with 3,3'-Dimethylbiphenyl-4,4'-diamine Oxidizing Reaction

The as-prepared co-doped N/Ag carbon dot (CDNAg) has strong catalysis of H₂O₂ oxidation of 3,3'-dimethylbiphenyl-4,4'-diamine (DBD). It forms an oxidation product (DBDox) with surface-enhanced Raman scattering (SERS) activity at 1605 cm-1 in the silver nanosol substrate, and a CDNAg catalytic amplification with SERS analytical platform can be structured based on aptamer (Apt) with the DBD oxidizing reaction. For example, the aptamer (Apt) of acetamiprid (ACT) can be adsorbed on the surface of CDNAg, resulting in inhibited catalytic activity, the reduced generation of DBDox, and a weakened SERS intensity. When the target molecule ACT was added, it formed a stable Apt-ACT complex and free CDNAg that restored catalytic activity and linearly enhanced the SERS signal. Based on this, we proposed a new quantitative SERS analysis method for the determination of 0.01⁻1.5 μg ACT with a detection limit of 0.006 μg/L.

Exonuclease I-assisted fluorescent method for ochratoxin A detection using iron-doped porous carbon, nitrogen-doped graphene quantum dots, and double magnetic separation

In this paper, a fluorescent method was developed for ochratoxin A (OTA) detection that uses iron-doped porous carbon (MPC) and aptamer-functionalized nitrogen-doped graphene quantum dots (NGQDs-Apt) as probes. In this method, the adsorbance of the NGQDs-Apt on the MPC due to a π-π interaction between the aptamer and the MPC results in the quenching of the fluorescence of the NGQDs-Apt. However, since OTA interacts strongly with the aptamer, the presence of OTA leads to the detachment of the NGQDs-Apt from the MPC, resulting in the resumption of fluorescence from the NGQDs-Apt. When exonuclease I (Exo I) is also added to the solution, this exonuclease specifically digests the aptamer, leading to the release of the OTA back into the solution. This free OTA then interacts with another MPC-NGQDs-Apt system, inducing the release of more NGQDs into the solution, which enhances the fluorescent intensity compared to that of the system with no Exo I. Utilizing this behavior of OTA in the presence of NGQDs-Apt, it was possible to detect concentrations of OTA ranging from 10 to 5000 nM, with a limit of detection of 2.28 nM. Our method was tested by applying it to the detection of OTA in wheat and corn samples. This method has four advantages: (1) the magnetic porous carbon is easy to prepare, its porosity enhances its loading capacity for NGQDs, it highly efficiently quenches the fluorescence of the NGQDs, and its magnetic properties facilitate the separation of the MPC from other species in solution; (2) applying double magnetic separation decreases the background signal; (3) Exo I digests the free aptamer effectively, which allows the resulting free OTA to induce the release of more NGQDs-Apt, ultimately enhancing the fluorescent signal; and (4) the proposed method presented high sensitivity and a wide linear detection range. This method may prove helpful in food safety analysis and new biosensor development (achieved by using different aptamer sequences to that used in the present work). Graphical abstract Exonuclease I (Exo I)-assisted fluorescent method for ochratoxin A (OTA) detection using magnetic porous carbon (MPC), nitrogen-doped graphene quantum dots (NGQDs), and double magnetic separation.

Quantum Dots-Based Immunochromatographic Strip for Rapid and Sensitive Detection of Acetamiprid in Agricultural Products

In this study, a rapid and sensitive immunochromatographic strip (ICS) assay, based on quantum dots (QDs), was developed for the qualitative and quantitative detection of acetamiprid in agricultural samples. Acetamiprid-ovalbumin conjugates (ACE-OVA) and goat anti-mouse IgG were sprayed onto a nitrocellulose membrane as a test and control line. Two kinds of anti-acetamiprid monoclonal antibodies (mAb) obtained in our lab were characterized by the ELISA and surface plasmon resonance assay. The competitive immunoassay was established using a QDs-mAb conjugate probe. The visual detection limit of acetamiprid for a qualitative threshold was set as 1 ng/mL to the naked eye. In the quantitative test, the fluorescence intensity was measured by a portable strip reader and a standard curve was obtained with a linear range from 0.098 to 25 ng/mL, and the half maximal inhibitory concentration of 1.12 ng/mL. The developed method showed no evident cross-reactivities with other neonicotinoid insecticides except for thiacloprid (36.68%). The accuracy and precision of the developed QDs-ICS were further evaluated. Results showed that the average recoveries ranged from 78.38 to 126.97% in agricultural samples. Moreover, to test blind tea samples, the QDs-ICS showed comparable reliability and a high correlation with ultra-performance liquid chromatography-tandem mass spectrometry. The whole sample detection could be accomplished within 1 h. In brief, our data clearly manifested that QDs-ICS was quite qualified for the rapid and sensitive screening of acetamiprid residues in an agricultural product analysis and paves the way to point-of-care testing for other analytes.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

Multi-coloration of Calixarene-coated Silver Nanoparticles for the Visual Discrimination of Metal Elements

Upon mixing with metal ions such as Cd^II, Tb^III, Cu^II, Ni^II, Pb^II, Zn^II, and Co^II at pH 10.0, solutions of silver nanoparticles (AgNPs) coated with calix[4]arene-p-tetrasulfonate (CAS-AgNP) exhibited multi-coloration from yellow to orange, violet, and green, depending on the metal elements present, which allowed for visual discrimination of the ions. This is contrary to the AgNP sensors exhibiting a uniform color change from yellow to red upon binding of a receptor molecules at the surface of AgNPs to an analyte. The TEM images of the samples obtained from the resultant solution showed two regions. First, a region where CAS-AgNPs assembled on the surface of the metal hydroxides. The size of the hydroxide crystals varied from 50 to 200 nm with the type of metal element present, and roughly correlated with the extinction band of the aggregated AgNPs. Second, the amorphous region in which CAS-AgNPs dispersed randomly. The difference in the amount of the crystal region and the area seemed to lead to the multi-coloration.

Apta-nanosensors for detection and quantitative determination of acetamiprid - A pesticide residue in food and environment

In an effort to achieve high sensitive and selective detection of pesticide residues, numerous nanomaterial-based aptasensors are currently being developed for acetamiprid analysis. Recently, aptamers as a potent alternative of antibodies are used in biosensing platforms. There is tremendous interest in utilizing of nanomaterial as basic building blocks and signaling elements in aptasensors. The nanomaterials have the unique optical and electrical properties. The combination of nanomaterial and aptamer technology has opened a new window in pesticide residues monitoring. In this review, recent advances and applications of optical and electrochemical nanomaterial-based aptasensors for the detection and quantitative determination of acetamiprid in details have been discussed.