Restriction site-free insertion of PCR products directionally into vectors

Capturing the catalytic intermediates of parkin ubiquitination

Parkin is an E3 ubiquitin ligase implicated in early-onset forms of Parkinson's disease. It catalyzes a transthiolation reaction by accepting ubiquitin (Ub) from an E2 conjugating enzyme, forming a short-lived thioester intermediate, and transfers Ub to mitochondrial membrane substrates to signal mitophagy. A major impediment to the development of Parkinsonism therapeutics is the lack of structural and mechanistic detail for the essential, short-lived transthiolation intermediate. It is not known how Ub is recognized by the catalytic Rcat domain in parkin that enables Ub transfer from an E2~Ub conjugate to the catalytic site and the structure of the transthiolation complex is undetermined. Here, we capture the catalytic intermediate for the Rcat domain of parkin in complex with ubiquitin (Rcat-Ub) and determine its structure using NMR-based chemical shift perturbation experiments. We show that a previously unidentified α-helical region near the Rcat domain is unmasked as a recognition motif for Ub and guides the C-terminus of Ub toward the parkin catalytic site. Further, we apply a combination of guided AlphaFold modeling, chemical cross-linking, and single turnover assays to establish and validate a model of full-length parkin in complex with UbcH7, its donor Ub, and phosphoubiquitin, trapped in the process of transthiolation. Identification of this catalytic intermediate and orientation of Ub with respect to the Rcat domain provides important structural insights into Ub transfer by this E3 ligase and explains how the previously enigmatic Parkinson's pathogenic mutation T415N alters parkin activity.

In vivo cloning of PCR product via site-specific recombination in Escherichia coli

Over the past years, several methods have been developed for gene cloning. Choosing a cloning strategy depends on various factors, among which simplicity and affordability have always been considered. The aim of this study, on the one hand, is to simplify gene cloning by skipping in vitro assembly reactions and, on the other hand, to reduce costs by eliminating relatively expensive materials. We investigated a cloning system using Escherichia coli harboring two plasmids, pLP-AmpR and pScissors-CmR. The pLP-AmpR contains a landing pad (LP) consisting of two genes (λ int and λ gam) that allow the replacement of the transformed linear DNA using site-specific recombination. After the replacement process, the inducible expressing SpCas9 and specific sgRNA from the pScissors-CmR (CRISPR/Cas9) vector leads to the removal of non-recombinant pLP-AmpR plasmids. The function of LP was explored by directly transforming PCR products. The pScissors-CmR plasmid was evaluated for curing three vectors, including the origins of pBR322, p15A, and pSC101. Replacing LP with a PCR product and fast-eradicating pSC101 origin-containing vectors was successful. Recombinant colonies were confirmed following gene replacement and plasmid curing processes. The results made us optimistic that this strategy may potentially be a simple and inexpensive cloning method. KEY POINTS: •The in vivo cloning was performed by replacing the target gene with the landing pad. •Fast eradication of non-recombinant plasmids was possible by adapting key vectors. •This strategy is not dependent on in vitro assembly reactions and expensive materials.

Evolution of plasmid-construction

Developing for almost half a century, plasmid-construction has explored more than 37 methods. Some methods have evolved into new versions. From a global and evolutionary viewpoint, a review will make a clear understand and an easy practice for plasmid-construction. The 37 methods employ three principles as creating single-strand overhang, recombining homology arms, or serving amplified insert as mega-primer, and are classified into three groups as single strand overhang cloning, homologous recombination cloning, and mega-primer cloning. The methods evolve along a route for easy, efficient, or/and seamless cloning. Mechanism of plasmid-construction is primer annealing or/and primer invasion. Scar junction is a must-be faced scientific problem in plasmid-construction.

2-Aminoacrylate stress damages diverse PLP-dependent enzymes in vivo

Pyridoxal 5′-phosphate (PLP) is an essential cofactor for a class of enzymes that catalyze diverse reactions in central metabolism. The catalytic mechanism of some PLP-dependent enzymes involves the generation of reactive enamine intermediates like 2-aminoacrylate (2AA). 2AA can covalently modify PLP in the active site of some PLP-dependent enzymes and subsequently inactivate the enzyme through the formation of a PLP–pyruvate adduct. In the absence of the enamine/imine deaminase RidA, Salmonella enterica experiences 2AA-mediated metabolic stress. Surprisingly, PLP-dependent enzymes that generate endogenous 2AA appear to be immune to its attack, while other PLP-dependent enzymes accumulate damage in the presence of 2AA stress; however, structural determinants of 2AA sensitivity are unclear. In this study, we refined a molecular method to query proteins from diverse systems for their sensitivity to 2AA in vivo. This method was then used to examine active site residues of Alr, a 2AA-sensitive PLP-dependent enzyme, that affect its sensitivity to 2AA in vivo. Unexpectedly, our data also showed that a low level of 2AA stress can persist even in the presence of a functional RidA. In summary, this study expands our understanding of 2AA metabolism and takes an initial step toward characterizing the structural determinants influencing enzyme susceptibility to damage by free 2AA.

Distinct phosphorylation signals drive acceptor versus free ubiquitin chain targeting by Parkin

The RBR E3 ligase parkin is recruited to the outer mitochondrial membrane (OMM) during oxidative stress where it becomes activated and ubiquitinates numerous proteins. Parkin activation involves binding of a phosphorylated ubiquitin (pUb), followed by phosphorylation of the Ubl domain in parkin, both mediated by the OMM kinase, PINK1. How an OMM protein is selected for ubiquitination is unclear. Parkin targeted OMM proteins have little structural or sequence similarity, with the commonality between substrates being proximity to the OMM. Here, we used chimeric proteins, tagged with ubiquitin (Ub), to evaluate parkin ubiquitination of mitochondrial acceptor proteins pre-ligated to Ub. We find that pUb tethered to the mitochondrial target proteins, Miro1 or CISD1, is necessary for parkin recruitment and essential for target protein ubiquitination. Surprisingly, phosphorylation of parkin is not necessary for the ubiquitination of either Miro1 or CISD1. Thus, parkin lacking its Ubl domain efficiently ubiquitinates a substrate tethered to pUb. Instead, phosphorylated parkin appears to stimulate free Ub chain formation. We also demonstrate that parkin ubiquitination of pUb-tethered substrates occurs on the substrate, rather than the pUb modification. We propose divergent parkin mechanisms whereby parkin-mediated ubiquitination of acceptor proteins is driven by binding to pre-existing pUb on the OMM protein and subsequent parkin phosphorylation triggers free Ub chain formation. This finding accounts for the broad spectrum of OMM proteins ubiquitinated by parkin and has implications on target design for therapeutics.

A ligation and restriction enzyme independent cloning technique: an alternative to conventional methods for cloning hard-to-clone gene segments in the influenza reverse genetics system

BACKGROUND

Reverse genetics is used in many laboratories around the world and enables the creation of tailor-made influenza viruses with a desired genotype or phenotype. However, the process is not flawless, and difficulties remain during cloning of influenza gene segments into reverse genetics vectors (pHW2000, pHH21, pCAGGS). Reverse genetics begins with making cDNA copies of influenza gene segments and cloning them into bi-directional (pHW2000) or uni-directional plasmids (pHH21, pCAGGS) followed by transfection of the recombinant plasmid(s) to HEK-293 T or any other suitable cells which are permissive to transfection. However, the presence of internal restriction sites in the gene segments of many field isolates of avian influenza viruses makes the cloning process difficult, if employing conventional methods. Further, the genetic instability of influenza gene-containing plasmids in bacteria (especially Polymerase Basic 2 and Polymerase Basic 1 genes; PB2 and PB1) also leads to erroneous incorporation of bacterial genomic sequences into the influenza gene of interest.

METHODS

Herein, we report an easy and efficient ligation and restriction enzyme independent (LREI) cloning method for cloning influenza gene segments into pHW2000 vector. The method involves amplification of megaprimers followed by PCR amplification of megaprimers using a bait plasmid, DpnI digestion and transformation.

RESULTS

Hard-to-clone genes: PB2 of A/chicken/Bangladesh/23527/2014 (H9N2) and PB1 of A/chicken/Bangladesh/23527/2014 (H9N2), A/chicken/Jiangxi/02.05YGYXG023-P/2015 (H5N6) and A/Chicken/Vietnam/H7F-14-BN4-315/2014 (H9N2) were cloned into pHW2000 using our LREI method and recombinant viruses were subsequently rescued.

CONCLUSION

The LREI cloning procedure represents an alternative strategy for cloning influenza gene segments which have internal restriction sites for the enzymes used in reverse genetics. Further, the problem of genetic instability in bacteria can be alleviated by growing recombinant bacterial cultures at a lower temperature. This technique can be applied to clone any influenza gene segment using universal primers, which would help in rapid generation of influenza viruses and facilitate influenza research and vaccine development.

Intra-Molecular Homologous Recombination of Scarless Plasmid

Although many methods have been reported, plasmid construction compromises transformant efficiency (number of transformants per ng of DNAs) with plasmid accuracy (rate of scarless plasmids). An efficient method is two-step PCR serving DNA amplification. An accurate method is ExnaseII cloning serving homology recombination (HR). We combine DNA amplification and HR to develop an intra-molecular HR by amplifying plasmid DNAs to contain homology 5'- and 3'-terminus and recombining the plasmid DNAs in vitro. An example was to construct plasmid pET20b-AdD. The generality was checked by constructing plasmid pET21a-AdD and pET22b-AdD in parallel. The DNAs having 30-bp homology arms were optimal for intra-molecular HR, and transformation of which created 14.2 transformants/ng and 90% scarless plasmids, more than the two-step PCR and the ExnaseII cloning. Transformant efficiency correlated with the component of nicked circular plasmid DNAs of HR products, indicating nick modification in vivo leads to scar plasmids.

An improved overlap extension PCR for simultaneous multiple sites large fragments insertion, deletion and substitution

The existing molecular cloning methods are often limited by the availability of suitable restriction sites. It is still a challenge for simultaneous cloning of multiple fragments into different sites of a single vector. Here we developed a novel method named improved overlap extension PCR (IOEP) for restriction enzyme independent cloning of large fragments. The addition of primers enables IOEP to exponentially amplify the overlap extension product, thus greatly improves the amplification efficiency of large fragments. Moreover, coupled with the benefit of T4 DNA polymerase to improve cloning efficiency, our method can be used to simultaneously insert, delete and replace multiple DNA fragments at different sites.

Unveiling sequential late-stage methyltransferase reactions in the meleagrin/oxaline biosynthetic pathway

Antimicrobial and anti-proliferative meleagrin and oxaline are roquefortine C-derived alkaloids produced by fungi of the genus Penicillium. Tandem O-methylations complete the biosynthesis of oxaline from glandicoline B through meleagrin. Currently, little is known about the role of these methylation patterns in the bioactivity profile of meleagrin and oxaline. To establish the structural and mechanistic basis of methylation in these pathways, crystal structures were determined for two late-stage methyltransferases in the oxaline and meleagrin gene clusters from Penicillium oxalicum and Penicillium chrysogenum. The homologous enzymes OxaG and RoqN were shown to catalyze penultimate hydroxylamine O-methylation to generate meleagrin in vitro. Crystal structures of these enzymes in the presence of methyl donor S-adenosylmethionine revealed an open active site, which lacks an apparent base indicating that catalysis is driven by proximity effects. OxaC was shown to methylate meleagrin to form oxaline in vitro, the terminal pathway product. Crystal structures of OxaC in a pseudo-Michaelis complex containing sinefungin and meleagrin, and in a product complex containing S-adenosyl-homocysteine and oxaline, reveal key active site residues with His313 serving as a base that is activated by Glu369. These data provide structural insights into the enzymatic methylation of these alkaloids that include a rare hydroxylamine oxygen acceptor, and can be used to guide future efforts towards selective derivatization and structural diversification and establishing the role of methylation in bioactivity.

Identification of a short, highly conserved, motif required for picornavirus capsid precursor processing at distal sites

Many picornaviruses cause important diseases in humans and other animals including poliovirus, rhinoviruses (causing the common cold) and foot-and-mouth disease virus (FMDV). These small, non-enveloped viruses comprise a positive-stranded RNA genome (ca. 7-9 kb) enclosed within a protein shell composed of 60 copies of three or four different capsid proteins. For the aphthoviruses (e.g. FMDV) and cardioviruses, the capsid precursor, P1-2A, is cleaved by the 3C protease (3Cpro) to generate VP0, VP3 and VP1 plus 2A. For enteroviruses, e.g. poliovirus, the capsid precursor is P1 alone, which is cleaved by the 3CD protease to generate just VP0, VP3 and VP1. The sequences required for correct processing of the FMDV capsid protein precursor in mammalian cells were analyzed. Truncation of the P1-2A precursor from its C-terminus showed that loss of the 2A peptide (18 residues long) and 27 residues from the C-terminus of VP1 (211 residues long) resulted in a precursor that cannot be processed by 3Cpro although it still contained two unmodified internal cleavage sites (VP0/VP3 and VP3/VP1 junctions). Furthermore, introduction of small deletions within P1-2A identified residues 185-190 within VP1 as being required for 3Cpro-mediated processing and for optimal accumulation of the precursor. Within this C-terminal region of VP1, five of these residues (YCPRP), are very highly conserved in all FMDVs and are also conserved amongst other picornaviruses. Mutant FMDV P1-2A precursors with single amino acid substitutions within this motif were highly resistant to cleavage at internal junctions. Such substitutions also abrogated virus infectivity. These results can explain earlier observations that loss of the C-terminus (including the conserved motif) from the poliovirus capsid precursor conferred resistance to processing. Thus, this motif seems essential for maintaining the correct structure of picornavirus capsid precursors prior to processing and subsequent capsid assembly; it may represent a site that interacts with cellular chaperones.

Overview of High-Throughput Cloning Methods for the Post-genomic Era

The advent of new DNA sequencing technologies leads to a dramatic increase in the number of available genome sequences and therefore of target genes with potential for functional analysis. The insertion of these sequences into proper expression vectors requires a simple an efficient cloning method. In addition, when expressing a target protein, quite often it is necessary to evaluate different DNA constructs to achieve a soluble and homogeneous expression of the target with satisfactory yields. The development of new molecular methods made possible the cloning of a huge number of DNA sequences in a high-throughput manner, necessary for meeting the increasing demands for soluble protein expression and characterization. In this chapter several molecular methods suitable for high-throughput cloning are reviewed.

Bacterial LPX motif-harboring virulence factors constitute a species-spanning family of cell-penetrating effectors

Effector proteins are key virulence factors of pathogenic bacteria that target and subvert the functions of essential host defense mechanisms. Typically, these proteins are delivered into infected host cells via the type III secretion system (T3SS). Recently, however, several effector proteins have been found to enter host cells in a T3SS-independent manner thereby widening the potential range of these virulence factors. Prototypes of such bacteria-derived cell-penetrating effectors (CPEs) are the Yersinia enterocolitica-derived YopM as well as the Salmonella typhimurium effector SspH1. Here, we investigated specifically the group of bacterial LPX effector proteins comprising the Shigella IpaH proteins, which constitute a subtype of the leucine-rich repeat protein family and share significant homologies in sequence and structure. With particular emphasis on the Shigella-effector IpaH9.8, uptake into eukaryotic cell lines was shown. Recombinant IpaH9.8 (rIpaH9.8) is internalized via endocytic mechanisms and follows the endo-lysosomal pathway before escaping into the cytosol. The N-terminal alpha-helical domain of IpaH9.8 was identified as the protein transduction domain required for its CPE ability as well as for being able to deliver other proteinaceous cargo. rIpaH9.8 is functional as an ubiquitin E3 ligase and targets NEMO for poly-ubiquitination upon cell penetration. Strikingly, we could also detect other recombinant LPX effector proteins from Shigella and Salmonella intracellularly when applied to eukaryotic cells. In this study, we provide further evidence for the general concept of T3SS-independent translocation by identifying novel cell-penetrating features of these LPX effectors revealing an abundant species-spanning family of CPE.

In vivo cloning of up to 16 kb plasmids in E. coli is as simple as PCR

The precise assembly of defined DNA sequences into plasmids is an essential task in bioscience research. While a number of molecular cloning techniques have been developed, many methods require specialized expensive reagents or laborious experimental procedure. Not surprisingly, conventional cloning techniques based on restriction digestion and ligation are still commonly used in routine DNA cloning. Here, we describe a simple, fast, and economical cloning method based on RecA- and RecET-independent in vivo recombination of DNA fragments with overlapping ends using E. coli. All DNA fragments were prepared by a 2-consecutive PCR procedure with Q5 DNA polymerase and used directly for transformation resulting in 95% cloning accuracy and zero background from parental template plasmids. Quantitative relationships were established between cloning efficiency and three factors–the length of overlapping nucleotides, the number of DNA fragments, and the size of target plasmids–which can provide general guidance for selecting in vivo cloning parameters. The method may be used to accurately assemble up to 5 DNA fragments with 25 nt overlapping ends into relatively small plasmids, and 3 DNA fragments into plasmids up to 16 kb in size. The whole cloning procedure may be completed within 2 days by a researcher with little training in cloning. The combination of high accuracy and zero background eliminates the need for screening a large number of colonies. The method requires no enzymes other than Q5 DNA polymerase, has no sequence restriction, is highly reliable, and represents one of the simplest, fastest, and cheapest cloning techniques available. Our method is particularly suitable for common cloning tasks in the lab where the primary goal is to quickly generate a plasmid with a pre-defined sequence at low costs.

Design considerations in coiled-coil fusion constructs for the structural determination of a problematic region of the human cardiac myosin rod

X-ray structural determination of segments of the myosin rod has proved difficult because of the strong salt-dependent aggregation properties and repeating pattern of charges on the surface of the coiled-coil that lead to the formation of paracrystals. This problem has been resolved in part through the use of globular assembly domains that improve protein folding and prevent aggregation. The primary consideration now in designing coiled-coil fusion constructs for myosin is deciding where to truncate the coiled-coil and which amino acid residues to include from the folding domain. This is especially important for myosin that contains numerous regions of low predicted coiled-coil propensity. Here we describe the strategy adopted to determine the structure of the region that extends from Arg1677 - Leu1797 that included two areas that do not show a strong sequence signature of a conventional left-handed coiled coil or canonical heptad repeat. This demonstrates again that, with careful choice of fusion constructs, overlapping structures exhibit very similar conformations for the myosin rod fragments in the canonical regions. However, conformational variability is seen around Leu1706 which is a hot spot for cardiomyopathy mutations suggesting that this might be important for function.

Functional characterization of a soluble NADPH-cytochrome P450 reductase from Fusarium graminearum

Fusarium head blight is a devastating disease in wheat caused by some fungal pathogens of the Fusarium genus mainly F. graminearum, due to accumulation of toxic trichothecenes. Most of the trichothecene biosynthetic pathway has been mapped, although some proteins of the pathway remain uncharacterized, including an NADPH-cytochrome P450 reductase. We subcloned a F. graminearum cytochrome P450 reductase that might be involved in the trichothecene biosynthesis. It was expressed heterologously in E. coli as N-terminal truncated form with an octahistidine tag for purification. The construct yielded a soluble apoprotein and its incubation with flavins yielded the corresponding monomeric holoprotein. It was characterized for activity in the pH range 5.5-9.5, using thiazolyl blue tetrazolium bromide (MTT) or cytochrome c as substrates. Binding of the small molecule MTT was weaker than for cytochrome c, however, the rate of MTT reduction was faster. Contrary to other studies of cytochrome reductase proteins, MTT reduction proceeded in a cooperative manner in our studies. Optimum kinetic activity was found at pH 7.5-8.5 for bothMTT and cytochrome c. This is the first paper presenting characterization of a cytochrome P450 reductase from F. graminearum which most likely is involved in mycotoxin biosynthesis or some primary metabolic pathway such as sterol biosynthesis in F. graminearum.

Separation of foot-and-mouth disease virus leader protein activities; identification of mutants that retain efficient self-processing activity but poorly induce eIF4G cleavage

Foot-and-mouth disease virus is a picornavirus and its RNA genome encodes a large polyprotein. The N-terminal part of this polyprotein is the leader protein, a cysteine protease, termed Lpro. The virus causes the rapid inhibition of host cell cap-dependent protein synthesis within infected cells. This results from the Lpro-dependent cleavage of the cellular translation initiation factor eIF4G. Lpro also releases itself from the virus capsid precursor by cleaving the L/P1 junction. Using site-directed mutagenesis of the Lpro coding sequence, we have investigated the role of 51 separate amino acid residues in the functions of this protein. These selected residues either are highly conserved or are charged and exposed on the protein surface. Using transient expression assays, within BHK-21 cells, it was found that residues around the active site (W52, L53 and A149) of Lpro and others located elsewhere (K38, K39, R44, H138 and W159) are involved in the induction of eIF4G cleavage but not in the processing of the L/P1 junction. Modified viruses, encoding such amino acid substitutions within Lpro, can replicate in BHK-21 cells but did not grow well in primary bovine thyroid cells. This study characterizes mutant viruses that are deficient in blocking host cell responses to infection (e.g. interferon induction) and can assist in the rational design of antiviral agents targeting this process and in the production of attenuated viruses.

T3SS-Independent Uptake of the Short-Trip Toxin-Related Recombinant NleC Effector of Enteropathogenic Escherichia coli Leads to NF-κB p65 Cleavage

Effector proteins secreted by the type 3 secretion system (T3SS) of pathogenic bacteria have been shown to precisely modulate important signaling cascades of the host for the benefit of the pathogens. Among others, the non-LEE encoded T3SS effector protein NleC of enteropathogenic Escherichia coli (EPEC) is a Zn-dependent metalloprotease and suppresses innate immune responses by directly targeting the NF-κB signaling pathway. Many pathogenic bacteria release potent bacterial toxins of the A-B type, which-in contrast to the direct cytoplasmic injection of T3SS effector proteins-are released first into the environment. In this study, we found that NleC displays characteristics of bacterial A-B toxins, when applied to eukaryotic cells as a recombinant protein. Although lacking a B subunit, that typically mediates the uptake of toxins, recombinant NleC (rNleC) induces endocytosis via lipid rafts and follows the endosomal-lysosomal pathway. The conformation of rNleC is altered by low pH to facilitate its escape from acidified endosomes. This is reminiscent of the homologous A-B toxin AIP56 of the fish pathogen Photobacterium damselae piscicida (Phdp). The recombinant protease NleC is functional inside eukaryotic cells and cleaves p65 of the NF-κB pathway. Here, we describe the endocytic uptake mechanism of rNleC, characterize its intracellular trafficking and demonstrate that its specific activity of cleaving p65 requires activation of host cells e.g., by IL1β. Further, we propose an evolutionary link between some T3SS effector proteins and bacterial toxins from apparently unrelated bacteria. In summary, these properties might suggest rNleC as an interesting candidate for future applications as a potential therapeutic against immune disorders.

Host cell interactions of outer membrane vesicle-associated virulence factors of enterohemorrhagic Escherichia coli O157: Intracellular delivery, trafficking and mechanisms of cell injury

Outer membrane vesicles (OMVs) are important tools in bacterial virulence but their role in the pathogenesis of infections caused by enterohemorrhagic Escherichia coli (EHEC) O157, the leading cause of life-threatening hemolytic uremic syndrome, is poorly understood. Using proteomics, electron and confocal laser scanning microscopy, immunoblotting, and bioassays, we investigated OMVs secreted by EHEC O157 clinical isolates for virulence factors cargoes, interactions with pathogenetically relevant human cells, and mechanisms of cell injury. We demonstrate that O157 OMVs carry a cocktail of key virulence factors of EHEC O157 including Shiga toxin 2a (Stx2a), cytolethal distending toxin V (CdtV), EHEC hemolysin, and flagellin. The toxins are internalized by cells via dynamin-dependent endocytosis of OMVs and differentially separate from vesicles during intracellular trafficking. Stx2a and CdtV-B, the DNase-like CdtV subunit, separate from OMVs in early endosomes. Stx2a is trafficked, in association with its receptor globotriaosylceramide within detergent-resistant membranes, to the Golgi complex and the endoplasmic reticulum from where the catalytic Stx2a A1 fragment is translocated to the cytosol. CdtV-B is, after its retrograde transport to the endoplasmic reticulum, translocated to the nucleus to reach DNA. CdtV-A and CdtV-C subunits remain OMV-associated and are sorted with OMVs to lysosomes. EHEC hemolysin separates from OMVs in lysosomes and targets mitochondria. The OMV-delivered CdtV-B causes cellular DNA damage, which activates DNA damage responses leading to G2 cell cycle arrest. The arrested cells ultimately die of apoptosis induced by Stx2a and CdtV via caspase-9 activation. By demonstrating that naturally secreted EHEC O157 OMVs carry and deliver into cells a cocktail of biologically active virulence factors, thereby causing cell death, and by performing first comprehensive analysis of intracellular trafficking of OMVs and OMV-delivered virulence factors, we provide new insights into the pathogenesis of EHEC O157 infections. Our data have implications for considering O157 OMVs as vaccine candidates.

Enterohemorrhagic Escherichia coli (EHEC) O157, the leading EHEC group causing diarrhea and the life-threatening hemolytic uremic syndrome in humans, produce several virulence factors which play distinct roles in the pathogenesis of these diseases. However, the mechanisms of their secretion and host cell injury are poorly understood. We show here that EHEC O157 strains isolated from patients shed nanostructures termed outer membrane vesicles (OMVs) which contain major EHEC O157 virulence factors including Shiga toxin 2a (Stx2a), cytolethal distending toxin V (CdtV), EHEC hemolysin, and flagellin. The OMVs are taken up by human intestinal epithelial and renal and brain microvascular endothelial cells, which are the major targets during EHEC O157 infections, and deliver the virulence factors intracellularly. Inside cells the virulence factors separate from OMVs and are transported via different pathways to their target compartments including the cytosol (Stx2a), nucleus (CdtV-B subunit), and mitochondria (EHEC hemolysin). Cells exposed to EHEC O157 OMVs develop G2 cell cycle arrest induced by CdtV-B-mediated DNA damage. This is followed by apoptotic cell death triggered by Stx2a and CdtV via caspase-9 activation. OMVs thus serve as novel tools of EHEC O157-mediated host injury and are quite likely involved in the pathogenesis of human diseases.

Family-specific Kinesin Structures Reveal Neck-linker Length Based on Initiation of the Coiled-coil

Kinesin-1, -2, -5, and -7 generate processive hand-over-hand 8-nm steps to transport intracellular cargoes toward the microtubule plus end. This processive motility requires gating mechanisms to coordinate the mechanochemical cycles of the two motor heads to sustain the processive run. A key structural element believed to regulate the degree of processivity is the neck-linker, a short peptide of 12-18 residues, which connects the motor domain to its coiled-coil stalk. Although a shorter neck-linker has been correlated with longer run lengths, the structural data to support this hypothesis have been lacking. To test this hypothesis, seven kinesin structures were determined by x-ray crystallography. Each included the neck-linker motif, followed by helix α7 that constitutes the start of the coiled-coil stalk. In the majority of the structures, the neck-linker length differed from predictions because helix α7, which initiates the coiled-coil, started earlier in the sequence than predicted. A further examination of structures in the Protein Data Bank reveals that there is a great disparity between the predicted and observed starting residues. This suggests that an accurate prediction of the start of a coiled-coil is currently difficult to achieve. These results are significant because they now exclude simple comparisons between members of the kinesin superfamily and add a further layer of complexity when interpreting the results of mutagenesis or protein fusion. They also re-emphasize the need to consider factors beyond the kinesin neck-linker motif when attempting to understand how inter-head communication is tuned to achieve the degree of processivity required for cellular function.

A composite approach towards a complete model of the myosin rod

Sarcomeric myosins have the remarkable ability to form regular bipolar thick filaments that, together with actin thin filaments, constitute the fundamental contractile unit of skeletal and cardiac muscle. This has been established for over 50 years and yet a molecular model for the thick filament has not been attained. In part this is due to the lack of a detailed molecular model for the coiled-coil that constitutes the myosin rod. The ability to self-assemble resides in the C-terminal section of myosin known as light meromyosin (LMM) which exhibits strong salt-dependent aggregation that has inhibited structural studies. Here we evaluate the feasibility of generating a complete model for the myosin rod by combining overlapping structures of five sections of coiled-coil covering 164 amino acid residues which constitute 20% of LMM. Each section contains ∼ 7-9 heptads of myosin. The problem of aggregation was overcome by incorporating the globular folding domains, Gp7 and Xrcc4 which enhance crystallization. The effect of these domains on the stability and conformation of the myosin rod was examined through biophysical studies and overlapping structures. In addition, a computational approach was developed to combine the sections into a contiguous model. The structures were aligned, trimmed to form a contiguous model, and simulated for >700 ns to remove the discontinuities and achieve an equilibrated conformation that represents the native state. This experimental and computational strategy lays the foundation for building a model for the entire myosin rod.

ClpB N-terminal domain plays a regulatory role in protein disaggregation

ClpB/Hsp100 is an ATP-dependent disaggregase that solubilizes and reactivates protein aggregates in cooperation with the DnaK/Hsp70 chaperone system. The ClpB-substrate interaction is mediated by conserved tyrosine residues located in flexible loops in nucleotide-binding domain-1 that extend into the ClpB central pore. In addition to the tyrosines, the ClpB N-terminal domain (NTD) was suggested to provide a second substrate-binding site; however, the manner in which the NTD recognizes and binds substrate proteins has remained elusive. Herein, we present an NMR spectroscopy study to structurally characterize the NTD-substrate interaction. We show that the NTD includes a substrate-binding groove that specifically recognizes exposed hydrophobic stretches in unfolded or aggregated client proteins. Using an optimized segmental labeling technique in combination with methyl-transverse relaxation optimized spectroscopy (TROSY) NMR, the interaction of client proteins with both the NTD and the pore-loop tyrosines in the 580-kDa ClpB hexamer has been characterized. Unlike contacts with the tyrosines, the NTD-substrate interaction is independent of the ClpB nucleotide state and protein conformational changes that result from ATP hydrolysis. The NTD interaction destabilizes client proteins, priming them for subsequent unfolding and translocation. Mutations in the NTD substrate-binding groove are shown to have a dramatic effect on protein translocation through the ClpB central pore, suggesting that, before their interaction with substrates, the NTDs block the translocation channel. Together, our findings provide both a detailed characterization of the NTD-substrate complex and insight into the functional regulatory role of the ClpB NTD in protein disaggregation.

Structural analysis of SepL, an enteropathogenic Escherichia coli type III secretion-system gatekeeper protein

During infection, enteropathogenic Escherichia coli assembles a complex multi-protein type III secretion system that traverses the bacterial membranes and targets the host cell membrane to directly deliver virulence or effector proteins to the host cytoplasm. As this secretion system is composed of more than 20 proteins, many of which form oligomeric associations, its assembly must be tightly regulated. A protein called the gatekeeper, or SepL, ensures that the secretion of the translocon component, which inserts into the host membrane, occurs before the secretion of effectors. The crystal structure of the gatekeeper SepL was determined and compared with the structures of SepL homologues from other bacterial pathogens in order to identify SepL residues that may be critical for its role in type III secretion-system assembly.

QuickStep-Cloning: a sequence-independent, ligation-free method for rapid construction of recombinant plasmids

Background

Molecular cloning is an essential step in biological engineering. Methods involving megaprimer-based PCR of a whole plasmid are promising alternatives to the traditional restriction-ligation-based molecular cloning. Their widespread use, however, is hampered by some of their inherent characteristics, e.g., linear amplification, use of self-annealing megaprimers and difficulty with performing point insertion of DNA. These limitations result in low product yield and reduced flexibility in the design of a genetic construct.

Result

Here, we present a novel technique of directional cloning, which overcomes these problems yet retaining the simplicity of whole-plasmid amplification. QuickStep-Cloning utilizes asymmetric PCRs to create a megaprimer pair with 3′-overhangs, and hence, facilitates the subsequent exponential whole-plasmid amplification. QuickStep-Cloning generates nicked-circular plasmids, thereby permitting direct bacterial transformation without DNA ligation. It allows DNA fragment integration into any plasmid at any position, in an efficient, time- and cost-effective manner, without tedious intermediate DNA gel purification, modified oligonucleotides, specialty enzymes and ultra-competent cells. The method is compatible with competent E. coli cells prepared using the conventional calcium chloride method.

Conclusion

QuickStep-Cloning expands the versatility of megaprimer-based cloning. It is an excellent addition to the cloning toolbox, for the benefit of protein engineers, metabolic engineers and synthetic biologists.

Electronic supplementary material

The online version of this article (doi:10.1186/s13036-015-0010-3) contains supplementary material, which is available to authorized users.

Biochemical Characterization of a Recombinant UDP-glucosyltransferase from Rice and Enzymatic Production of Deoxynivalenol-3-O-β-D-glucoside

Glycosylation is an important plant defense mechanism and conjugates of Fusarium mycotoxins often co-occur with their parent compounds in cereal-based food and feed. In case of deoxynivalenol (DON), deoxynivalenol-3-O-β-D-glucoside (D3G) is the most important masked mycotoxin. The toxicological significance of D3G is not yet fully understood so that it is crucial to obtain this compound in pure and sufficient quantities for toxicological risk assessment and for use as an analytical standard. The aim of this study was the biochemical characterization of a DON-inactivating UDP-glucosyltransferase from rice (OsUGT79) and to investigate its suitability for preparative D3G synthesis. Apparent Michaelis constants (Km) of recombinant OsUGT79 were 0.23 mM DON and 2.2 mM UDP-glucose. Substrate inhibition occurred at DON concentrations above 2 mM (Ki = 24 mM DON), and UDP strongly inhibited the enzyme. Cu2+ and Zn2+ (1 mM) inhibited the enzyme completely. Sucrose synthase AtSUS1 was employed to regenerate UDP-glucose during the glucosylation reaction. With this approach, optimal conversion rates can be obtained at limited concentrations of the costly co-factor UDP-glucose. D3G can now be synthesized in sufficient quantity and purity. Similar strategies may be of interest to produce β-glucosides of other toxins.

Critical role for Orai1 C-terminal domain and TM4 in CRAC channel gating

Calcium flux through store-operated calcium entry is a major regulator of intracellular calcium homeostasis and various calcium signaling pathways. Two key components of the store-operated calcium release-activated calcium channel are the Ca(2+)-sensing protein stromal interaction molecule 1 (STIM1) and the channel pore-forming protein Orai1. Following calcium depletion from the endoplasmic reticulum, STIM1 undergoes conformational changes that unmask an Orai1-activating domain called CAD. CAD binds to two sites in Orai1, one in the N terminal and one in the C terminal. Most previous studies suggested that gating is initiated by STIM1 binding at the Orai1 N-terminal site, just proximal to the TM1 pore-lining segment, and that binding at the C terminal simply anchors STIM1 within reach of the N terminal. However, a recent study had challenged this view and suggested that the Orai1 C-terminal region is more than a simple STIM1-anchoring site. In this study, we establish that the Orai1 C-terminal domain plays a direct role in gating. We identify a linker region between TM4 and the C-terminal STIM1-binding segment of Orai1 as a key determinant that couples STIM1 binding to gating. We further find that Proline 245 in TM4 of Orai1 is essential for stabilizing the closed state of the channel. Taken together with previous studies, our results suggest a dual-trigger mechanism of Orai1 activation in which binding of STIM1 at the N- and C-terminal domains of Orai1 induces rearrangements in proximal membrane segments to open the channel.

Requirements for resuming translation in chimeric transfer-messenger RNAs of Escherichia coli and Mycobacterium tuberculosis

BACKGROUND

Trans-translation is catalyzed by ribonucleprotein complexes composed of SmpB protein and transfer-messenger RNA. They release stalled ribosomes from truncated mRNAs and tag defective proteins for proteolytic degradation. Comparative sequence analysis of bacterial tmRNAs provides considerable insights into their secondary structures in which a tRNA-like domain and an mRNA-like region are connected by a variable number of pseudoknots. Progress toward understanding the molecular mechanism of trans-translation is hampered by our limited knowledge about the structure of tmRNA:SmpB complexes.

RESULTS

Complexes consisting of M. tuberculosis tmRNA and E. coli SmpB tag truncated proteins poorly in E. coli. In contrast, the tagging activity of E. coli tmRNA is well supported by M. tuberculosis SmpB that is expressed in E. coli. To investigate this incompatibility, we constructed 12 chimeric tmRNA molecules composed of structural features derived from both E. coli and M. tuberculosis. Our studies demonstrate that replacing the hp5-pk2-pk3-pk4 segment of E. coli tmRNA with the equivalent segment of M. tuberculosis tmRNA has no significant effect on the tagging efficiency of chimeric tmRNAs in the presence of E. coli SmpB. Replacing either helices 2b-2d, the single-stranded part of the ORF, pk1, or residues 79-89 of E. coli tmRNA with the equivalent features of M. tuberculosis tmRNA yields chimeric tmRNAs that are tagged at 68 to 88 percent of what is observed with E. coli tmRNA. Exchanging segments composed of either pk1 and the single-stranded segment upstream of the ORF or helices 2b-2d and pk1 results in markedly impaired tagging activity.

CONCLUSION

Our observations demonstrate the existence of functionally important but as yet uncharacterized structural constraints in the segment of tmRNA that connects its TLD to the ORF used for resuming translation. As trans-translation is important for the survival of M. tuberculosis, our work provides a new target for pharmacological intervention against multidrug-resistant tuberculosis.

A single-tube assembly of DNA using the transfer-PCR (TPCR) platform

DNA cloning is a basic methodology employed for multiple applications in all life-science disciplines. In order to facilitate DNA cloning we developed Transfer-PCR (TPCR), a novel approach that integrates in a single tube, PCR amplification of the target DNA from an origin vector and its subsequent integration into the destination vector. TPCR can be applied for incorporation of DNA fragments into any desired position within a circular plasmid without the need for purification of the intermediate PCR product and without the use of any commercial kit. TPCR reaction is most efficient within a narrow range of primer concentrations. Adaptation of the TPCR should facilitate, simplify, and significantly reduce time and costs for DNA assembly, as well as protein engineering studies. In the current publication we describe a detailed protocol for implementation of the TPCR method for DNA assembly.

Binding induced RNA conformational changes control substrate recognition and catalysis by the thiostrepton resistance methyltransferase (Tsr)

Ribosomal RNA (rRNA) post-transcriptional modifications are essential for ribosome maturation, translational fidelity, and are one mechanism used by both antibiotic-producing and pathogenic bacteria to resist the effects of antibiotics that target the ribosome. The thiostrepton producer Streptomyces azureus prevents self-intoxication by expressing the thiostrepton-resistance methyltransferase (Tsr), which methylates the 2'-hydroxyl of 23 S rRNA nucleotide adenosine 1067 within the thiostrepton binding site. Tsr is a homodimer with each protomer containing an L30e-like amino-terminal domain (NTD) and a SPOUT methyltransferase family catalytic carboxyl-terminal domain (CTD). We show that both enzyme domains are required for high affinity RNA substrate binding. The Tsr-CTD has intrinsic, weak RNA affinity that is necessary to direct the specific high-affinity Tsr-RNA interaction via NTDs, which have no detectable RNA affinity in isolation. RNA structure probing experiments identify the Tsr footprint on the RNA and structural changes in the substrate, induced specifically upon NTD binding, which are necessary for catalysis by the CTD. Additionally, we identify a key amino acid in each domain responsible for CTD-RNA binding and the observed NTD-dependent RNA structural changes. These studies allow us to develop a model for Tsr-RNA interaction in which the coordinated substrate recognition of each Tsr structural domain is an obligatory pre-catalytic recognition event. Our findings underscore the complexity of substrate recognition by RNA modification enzymes and the potential for direct involvement of the RNA substrate in controlling the process of its modification.

In vivo antigen-driven plasmablast enrichment in combination with antigen-specific cell sorting to facilitate the isolation of rare monoclonal antibodies from human B cells

The ability to rapidly generate large panels of antigen-specific human antibodies in a rodent would enable the efficient discovery of novel therapeutically useful antibodies. We have developed a system wherein human antigen-specific antibody-secreting plasmablasts can be enriched in vivo, in a severe combined immunodeficient (SCID)/beige mouse host. The antigen-specific plasmablasts can then be sorted by flow cytometry, enabling single-cell cloning and expression of fully human immunoglobulin-G. By using this technique, we have generated four broadly reactive anti-influenza A antibodies. Therefore, the method described here is useful for the identification of rare functional antibodies. This protocol takes ∼1 month to complete, from the time of human vaccination to the cloning of heavy- and light-chain genes. For additional small-scale transient expression, purification and binding analysis, the protocol would take an additional month.

Recombination-assisted megaprimer (RAM) cloning

No molecular cloning technique is considered universally reliable, and many suffer from being too laborious, complex, or expensive. Restriction-free cloning is among the simplest, most rapid, and cost-effective methods, but does not always provide successful results. We modified this method to enhance its success rate through the use of exponential amplification coupled with homologous end-joining. This new method, recombination-assisted megaprimer (RAM) cloning, significantly extends the application of restriction-free cloning, and allows efficient vector construction with much less time and effort when restriction-free cloning fails to provide satisfactory results. The following modifications were made to the protocol:•

Limited number of PCR cycles for both megaprimer synthesis and the cloning reaction to reduce error propagation.

•

Elimination of phosphorylation and ligation steps previously reported for cloning methods that used exponential amplification, through the inclusion of a reverse primer in the cloning reaction with a 20 base pair region of homology to the forward primer.

•

The inclusion of 1 M betaine to enhance both reaction specificity and yield.

A high-throughput, restriction-free cloning and screening strategy based on ccdB-gene replacement

Background

In high-throughput demanding fields, such as biotechnology and structural biology, molecular cloning is an essential tool in obtaining high yields of recombinant protein. Here, we address recently developed restriction-free methods in cloning, and present a more cost-efficient protocol that has been optimized to improve both cloning and clone screening.

Results

In our case study, three homologous β-lactamase genes were successfully cloned using these restriction-free protocols. To clone the genes, we chose a gene replacement strategy, where the recombinant genes contained overhangs that targeted a region of the expression vector including a cytotoxin-encoding ccdB-gene.

Conclusion

We provide further evidence that gene replacement can be applied with high-throughput cloning protocols. Targeting a replacement of the ccdB-gene was found to be very successful for counterselection using these protocols. This eliminated the need for treatment with the restriction enzyme DpnI that has so far been the preferred clone selection approach. We thus present an optimized cloning protocol using a restriction-free ccdB-gene replacement strategy, which allows for parallel cloning at a high-throughput level.

Directional cloning of DNA fragments using deoxyinosine-containing oligonucleotides and endonuclease V

BACKGROUND

DNA fragments carrying internal recognition sites for the restriction endonucleases intended for cloning into a target plasmid pose a challenge for conventional cloning.

RESULTS

A method for directional insertion of DNA fragments into plasmid vectors has been developed. The target sequence is amplified from a template DNA sample by PCR using two oligonucleotides each containing a single deoxyinosine base at the third position from the 5' end. Treatment of such PCR products with endonuclease V generates 3' protruding ends suitable for ligation with vector fragments created by conventional restriction endonuclease reactions.

CONCLUSIONS

The developed approach generates terminal cohesive ends without the use of Type II restriction endonucleases, and is thus independent from the DNA sequence. Due to PCR amplification, minimal amounts of template DNA are required. Using the robust Taq enzyme or a proofreading Pfu DNA polymerase mutant, the method is applicable to a broad range of insert sequences. Appropriate primer design enables direct incorporation of terminal DNA sequence modifications such as tag addition, insertions, deletions and mutations into the cloning strategy. Further, the restriction sites of the target plasmid can be either retained or removed.

Substrate ambiguous enzymes within the Escherichia coli proteome offer different evolutionary solutions to the same problem

Many enzymes exhibit some catalytic promiscuity or substrate ambiguity. These weak activities do not affect the fitness of the organism under ordinary circumstances, but can serve as potential evolutionary precursors of new catalytic functions. We wondered whether different proteins with the same substrate ambiguous activity evolve differently under identical selection conditions. Patrick et al. (Patrick WM, Quandt EM, Swartzlander DB, Matsumura I. 2007. Multicopy suppression underpins metabolic evolvability. Mol Biol Evol. 24:2716-2722.) previously showed that three multicopy suppressors, gph, hisB, and ytjC, rescue ΔserB Escherichia coli cells from starvation on minimal media. We directed the evolution of variants of Gph, histidinol phosphatase (HisB), and YtjC that complemented ΔserB more efficiently, and characterized the effects of the amino acid changes, alone and in combination, upon the evolved phosphoserine phosphatase (PSP) activity. Gph and HisB are members of the HAD superfamily of hydrolases, but they adapted through different, kinetically distinguishable, biochemical mechanisms. All of the selected mutations, except N102T in YtjC, proved to be beneficial in isolation. They exhibited a pattern of antagonistic epistasis, as their effects in combination upon the kinetic parameters of the three proteins in reactions with phosphoserine were nonmultiplicative. The N102T mutation exhibited sign epistasis, as it was deleterious in isolation but beneficial in the context of other mutations. We also showed that the D57N mutation in the chromosomal copy of hisB is sufficient to suppress the ΔserB deletion. These results in combination show that proteomes can offer multiple mechanistic solutions to a molecular recognition problem.

Structural organization of FtsB, a transmembrane protein of the bacterial divisome

We report the first structural analysis of an integral membrane protein of the bacterial divisome. FtsB is a single-pass membrane protein with a periplasmic coiled coil. Its heterologous association with its partner FtsL represents an essential event for the recruitment of the late components to the division site. Using a combination of mutagenesis, computational modeling, and X-ray crystallography, we determined that FtsB self-associates, and we investigated its structural organization. We found that the transmembrane domain of FtsB homo-oligomerizes through an evolutionarily conserved interaction interface where a polar residue (Gln 16) plays a critical role through the formation of an interhelical hydrogen bond. The crystal structure of the periplasmic domain, solved as a fusion with Gp7, shows that 30 juxta-membrane amino acids of FtsB form a canonical coiled coil. The presence of conserved Gly residue in the linker region suggests that flexibility between the transmembrane and coiled coil domains is functionally important. We hypothesize that the transmembrane helices of FtsB form a stable dimeric core for its association with FtsL into a higher-order oligomer and that FtsL is required to stabilize the periplasmic domain of FtsB, leading to the formation of a complex that is competent for binding to FtsQ, and to their consequent recruitment to the divisome. The study provides an experimentally validated structural model and identifies point mutations that disrupt association, thereby establishing important groundwork for the functional characterization of FtsB in vivo.

Robust one-tube Ω-PCR strategy accelerates precise sequence modification of plasmids for functional genomics

Functional genomics requires vector construction for protein expression and functional characterization of target genes; therefore, a simple, flexible and low-cost molecular manipulation strategy will be highly advantageous for genomics approaches. Here, we describe a Ω-PCR strategy that enables multiple types of sequence modification, including precise insertion, deletion and substitution, in any position of a circular plasmid. Ω-PCR is based on an overlap extension site-directed mutagenesis technique, and is named for its characteristic Ω-shaped secondary structure during PCR. Ω-PCR can be performed either in two steps, or in one tube in combination with exonuclease I treatment. These strategies have wide applications for protein engineering, gene function analysis and in vitro gene splicing.

Exponential megapriming PCR (EMP) cloning--seamless DNA insertion into any target plasmid without sequence constraints

We present a fast, reliable and inexpensive restriction-free cloning method for seamless DNA insertion into any plasmid without sequence limitation. Exponential megapriming PCR (EMP) cloning requires two consecutive PCR steps and can be carried out in one day. We show that EMP cloning has a higher efficiency than restriction-free (RF) cloning, especially for long inserts above 2.5 kb. EMP further enables simultaneous cloning of multiple inserts.

RF-Cloning.org: an online tool for the design of restriction-free cloning projects

Restriction-free cloning (RF-cloning) is a PCR-based technology that expands on the QuikChange™ mutagenesis process originally popularized by Stratagene in the mid-1990s, and allows the insertion of essentially any sequence into any plasmid at any location. While RF-cloning is a powerful tool for the design of custom plasmids when restriction sites are not conveniently situated, manually designing the requisite primers can be tedious and error prone. We present here a web-service that automates the primer design process, along with a user interface that includes a number of useful tools for managing both the input sequences and the resulting outputs. RF-Cloning is free and open to all users, and can be accessed at http://www.rf-cloning.org.

Inverse fusion PCR cloning

Inverse fusion PCR cloning (IFPC) is an easy, PCR based three-step cloning method that allows the seamless and directional insertion of PCR products into virtually all plasmids, this with a free choice of the insertion site. The PCR-derived inserts contain a vector-complementary 5′-end that allows a fusion with the vector by an overlap extension PCR, and the resulting amplified insert-vector fusions are then circularized by ligation prior transformation. A minimal amount of starting material is needed and experimental steps are reduced. Untreated circular plasmid, or alternatively bacteria containing the plasmid, can be used as templates for the insertion, and clean-up of the insert fragment is not urgently required. The whole cloning procedure can be performed within a minimal hands-on time and results in the generation of hundreds to ten-thousands of positive colonies, with a minimal background.

Structure-function analysis of the C-terminal domain of CNM67, a core component of the Saccharomyces cerevisiae spindle pole body

The spindle pole body of the budding yeast Saccharomyces cerevisiae has served as a model system for understanding microtubule organizing centers, yet very little is known about the molecular structure of its components. We report here the structure of the C-terminal domain of the core component Cnm67 at 2.3 Å resolution. The structure determination was aided by a novel approach to crystallization of proteins containing coiled-coils that utilizes globular domains to stabilize the coiled-coils. This enhances their solubility in Escherichia coli and improves their crystallization. The Cnm67 C-terminal domain (residues Asn-429-Lys-581) exhibits a previously unseen dimeric, interdigitated, all α-helical fold. In vivo studies demonstrate that this domain alone is able to localize to the spindle pole body. In addition, the structure reveals a large functionally indispensable positively charged surface patch that is implicated in spindle pole body localization. Finally, the C-terminal eight residues are disordered but are critical for protein folding and structural stability.

Structure of the tropomyosin overlap complex from chicken smooth muscle: insight into the diversity of N-terminal recognition

Tropomyosin is a stereotypical alpha-helical coiled coil that polymerizes to form a filamentous macromolecular assembly that lies on the surface of F-actin. The interaction between the C-terminal and N-terminal segments on adjacent molecules is known as the overlap region. We report here two X-ray structures of the chicken smooth muscle tropomyosin overlap complex. A novel approach was used to stabilize the C-terminal and N-terminal fragments. Globular domains from both the human DNA ligase binding protein XRCC4 and bacteriophage varphi29 scaffolding protein Gp7 were fused to 37 and 28 C-terminal amino acid residues of tropomyosin, respectively, whereas the 29 N-terminal amino acids of tropomyosin were fused to the C-terminal helix bundle of microtubule binding protein EB1. The structures of both the XRCC4 and Gp7 fusion proteins complexed with the N-terminal EB1 fusion contain a very similar helix bundle in the overlap region that encompasses approximately 15 residues. The C-terminal coiled coil opens to allow formation of the helix bundle, which is stabilized by hydrophobic interactions. These structures are similar to that observed in the NMR structure of the rat skeletal overlap complex [Greenfield, N. J., et al. (2006) J. Mol. Biol. 364, 80-96]. The interactions between the N- and C-terminal coiled coils of smooth muscle tropomyosin show significant curvature, which differs somewhat between the two structures and implies flexibility in the overlap complex, at least in solution. This is likely an important attribute that allows tropomyosin to assemble around the actin filaments. These structures provide a molecular explanation for the role of N-acetylation in the assembly of native tropomyosin.

Applications of the Restriction Free (RF) cloning procedure for molecular manipulations and protein expression

Molecular manipulations, including DNA cloning and mutagenesis are basic tools used on a routine basis in all life-science disciplines. Over the last decade new methodologies have emerged that facilitated and expanded the applications for DNA cloning and mutagenesis. Ligation-Independent Cloning (LIC) techniques were developed and replaced the classical Ligation Dependent Cloning (LDC) platform. Restriction Free (RF) cloning was originally developed for introduction of foreign DNA into a plasmid at any predetermined position. RF cloning is based on PCR amplification of a DNA fragment, which serves as a mega-primer for the linear amplification of the vector and insert. Here we present several novel applications of the Restriction Free (RF) cloning platform for DNA cloning and mutagenesis. The new applications include simultaneous cloning of several DNA fragments into distinct positions within an expression vector, simultaneous multi-component assembly, and parallel cloning of the same PCR product into a series of different vectors. In addition, we have expanded the application of the RF cloning platform for multiple alterations of the target DNA, including simultaneous multiple-site mutagenesis and simultaneous introduction of deletions and insertions at different positions. We further demonstrate the robustness of the new applications for facilitating recombinant protein expression in the Escherichia coli system.

The level of synthesis and secretion of Gaussia princeps luciferase in transfected CHO cells is heavily dependent on the choice of signal peptide

There is a great demand for the improvement of mammalian cell production systems such that they can compete economically with their prokaryotic counterparts. Of a number of parameters that need to be explored to accomplish this we have tested the effects of different signal peptides on the synthesis and secretion of Gaussia princeps luciferase in mammalian cells. A series of plasmids were transfected into CHO cells where the coding region for the marine luciferase was fused to the signal peptide coding regions derived from different sources. Both cell extracts and medium samples were analysed for luciferase activity. When the native Gaussia luciferase signal sequence in the vector was substituted by that from human interleukin-2 or albumin then the amount of active recombinant protein produced was substantially reduced, both in transiently and stably transfected cells. Western blotting showed that enzyme activity and protein levels mirrored one another. The major decrease in luciferase activity was shown not to be a result of decreased mRNA levels, indicating the involvement of a post-transcriptional event. When the coding region of human endostatin was fused to that of the Gaussia luciferase signal peptide then an elevated level of secreted endostatin was observed compared to when that of the albumin signal peptide was used. Stable transfection of HepG2 cells with the different signal peptide constructs gave essentially the same results as seen in CHO cells. The overall results indicate that the choice of signal peptide can be imperative to ensure an optimal synthesis and secretion of a recombinant protein in a mammalian cell culture system.

Vectors Encoding Seven Oikosin Signal Peptides Transfected into CHO Cells Differ Greatly in Mediating Gaussia luciferase and Human Endostatin Production although mRNA Levels are Largely Unaffected

The signal peptide of the luciferase secreted by the marine copepod Gaussia princeps has been shown to promote high-level protein synthesis/secretion of recombinant proteins, being far superior to mammalian counterparts. The main aim of the present study was to investigate the effects of seven selected signal peptides derived from oikosins, house proteins of the marine organism Oikopleura dioica, on synthesis/secretion of recombinant proteins. Vector constructs were made in which the coding regions of two naturally secreted proteins, Gaussia luciferase and human endostatin (hEndostatin), were “seamlessly” fused to the signal peptide coding sequences of interest. CHO cells were transfected with the plasmids and populations of stably transfected cells established. The amounts of reporter proteins in cell extract and medium samples were determined and the results compared to those obtained from cells stably transfected with a reference vector construct. In addition, the amounts of luciferase or hEndostatin encoding mRNAs in the cells were determined and related to the protein levels obtained. The levels of reporter protein produced varied greatly among the seven oikosin signal peptides tested. Whereas the oikosin 1 signal peptide resulted in about 40% production of Gaussia luciferase compared to the reference construct, oikosins 2–7 were extremely ineffective (<1%). mRNA levels were not dramatically affected such that inadequate availability of transcript for translation was not the underlying reason for the observations. The oikosin 1 signal peptide was also the most effective regarding synthesis/secretion of hEndostatin. No secreted product was observed using the oikosin 3 signal peptide. Interestingly, the molecular weight of hEndostatin in cell extracts prepared from cells transfected with oikosin 2 and 3 constructs was higher than that using the oikosin 1 signal peptide. The overall findings indicate that the signal peptide affects the efficiency of protein synthesis and secretion through a mechanism operating at the post-transcriptional level. The results described here provide substantial support to our previous observations which suggested that the choice of the signal peptide is imperative when aiming to achieve optimal synthesis and secretion of a recombinant protein using transfected mammalian cells.

An improved method for fast, robust, and seamless integration of DNA fragments into multiple plasmids

We describe an improved, universal method for the seamless integration of DNA fragments into plasmids at any desired position. The protocol allows in vitro joining of insert and linearized plasmid at terminal homology regions using the BD In-Fusion cloning system. According to the standard BD In-Fusion protocol, vectors are linearized by restriction enzyme digestion. Linearization of plasmids by polymerase chain reaction (PCR), instead of restriction enzyme digestion, extends the usefulness of the method by rendering it independent of restriction endonuclease recognition sites and by allowing seamless insertion of DNA fragments at any position, without introduction of unwanted nucleotides flanking the site of insertion. The combination of PCR linearization of plasmids and BD In-Fusion technology has shown to be very useful for the insertion of genes into the expression regions of multiple plasmids for the heterologous expression of proteins in Escherichia coli. Hands-on time is minimal and there is no need for preparative gel electrophoresis. The protocol is very simple and only involves PCR and liquid handling steps. The method should therefore theoretically have a good potential for automation.

Contributions of pseudoknots and protein SmpB to the structure and function of tmRNA in trans-translation

Bacteria contain transfer-messenger RNA (tmRNA), a molecule that during trans-translation tags incompletely translated proteins with a small peptide to signal the proteolytic destruction of defective polypeptides. TmRNA is composed of tRNA- and mRNA-like domains connected by several pseudoknots. Using truncated ribosomal protein L27 as a reporter for tagging in vitro and in vivo, we have developed exceptionally sensitive assays to study the role of Escherichia coli tmRNA in trans-translation. Site-directed mutagenesis experiments showed that pseudoknot 2 and the abutting helix 5 were particularly important for the binding of ribosomal protein S1 to tmRNA. Pseudoknot 4 not only facilitated tmRNA maturation but also promoted tagging. In addition, the three pseudoknots (pk2 to pk4) were shown to play a significant role in the proper folding of the tRNA-like domain. Protein SmpB enhanced tmRNA processing, suggesting a new role for SmpB in trans-translation. Taken together, these results provide unanticipated insights into the functions of the pseudoknots and protein SmpB during tmRNA folding, maturation, and protein synthesis.

Functional compatibility of elongation factors between mammalian mitochondrial and bacterial ribosomes: characterization of GTPase activity and translation elongation by hybrid ribosomes bearing heterologous L7/12 proteins

The mammalian mitochondrial (mt) ribosome (mitoribosome) is a bacterial-type ribosome but has a highly protein-rich composition. Almost half of the rRNA contained in the bacterial ribosome is replaced with proteins in the mitoribosome. Escherichia coli elongation factor G (EF-G Ec) has no translocase activity on the mitoribosome but EF-G mt is functional on the E.coli ribosome. To investigate the functional equivalency of the mt and E.coli ribosomes, we prepared hybrid mt and E.coli ribosomes. The hybrid mitoribosome containing E.coli L7/12 (L7/12 Ec) instead of L7/12 mt clearly activated the GTPase of EF-G Ec and efficiently promoted its translocase activity in an in vitro translation system. Thus, the mitoribosome is functionally equivalent to the E.coli ribosome despite their distinct compositions. The mt EF-Tu-dependent translation activity of the E.coli ribosome was also clearly enhanced by replacing the C-terminal domain (CTD) of L7/12 Ec with the mt counterpart (the hybrid E.coli ribosome). This strongly indicates that the CTD of L7/12 is responsible for EF-Tu function. These results demonstrate that functional compatibility between elongation factors and the L7/12 protein in the ribosome governs its translational specificity.