Incorporation of reporter-labeled nucleotides by DNA polymerases

Optimized Method for the Synthesis of Alkyne-Modified 2'-Deoxynucleoside Triphosphates

A general approach is presented for synthesizing alkyne-modified nucleoside triphosphates via the Sonogashira cross-coupling reaction of unprotected halogenated 2'-deoxynucleoside, followed by monophosphorylation and the reaction of the corresponding phosphoromorpholidate with tributylammonium pyrophosphate. A highly efficient approach for the milligram-scale synthesis of base-modified nucleoside triphosphates with an amino acid-like side chain was developed. The present chemical method outweighs the other reported methods of a base-modified nucleoside triphosphates synthesis in terms of it being a protection-free strategy, the shortening of reaction steps, and increased yields (about 70%). The resulting 8-alkynylated dATP was tested as a substrate for DNA polymerases in a primer extension reaction.

High-Performance Suspension Bead Sensor Based on Optical Tweezers and Immuno-Rolling Circle Amplification

In recent years, optical tweezers have become an effective bioassay tool due to their unique advantages, especially in combination with suspension beads, which can be applied to develop a high-performance analysis platform capable of high-quality imaging and stable signal output. However, the optical tweezer-assisted bead analysis is still at the early stage, and further development of different favorable methods is in need. Herein, we have first developed the optical tweezer-assisted immuno-rolling circle amplification (immuno-RCA) on beads for protein detection. Prostate-specific antigen was selected as the model analyte, and the immunosandwich structure on beads was built by the high affinity of "antibody-antigen". The "protein-nucleic acid" signals were effectively converted through the covalent coupling procedure of antibodies and oligonucleotides, further initiating the RCA reaction to achieve signal amplification. The individual beads with the strong irregular Brownian motion in a fluid environment were eventually trapped by the optical tweezers to acquire the accurate and high-quality signal. Compared with the conventional immunoassay on beads, the sensitivity of the developed strategy was increased by 587 times with a limit of detection of 4.29 pg/mL (0.13 pM), as well as excellent specificity, stability, and reproducibility. This study developed the new optical tweezer-assisted beads imaging strategy for protein targets, which has great potential for being applied to clinical serology research and expands the application of optical tweezers in the bioassays.

Comparison of pre-labelled primers and nucleotides as DNA labelling method for lateral flow detection of Legionella pneumophila amplicons

Labelling of nucleic acid amplicons during polymerase chain reaction (PCR) or isothermal techniques is possible by using both labelled primers and labelled nucleotides. While the former is the widely used method, the latter can offer significant advantages in terms of signal enhancement and improving the detection limit of an assay. Advantages and disadvantages of both methods depend on different factors, including amplification method, detection method and amplicon length. In this study, both methods for labelling PCR products for lateral flow assay (LFA) analysis (LFA-PCR) were analysed and compared. It was shown that labelling by means of nucleotides results in an increase in label incorporation rates. Nonetheless, this advantage is negated by the need for post-processing and competitive interactions. In the end, it was possible to achieve a detection limit of 3 cell equivalents for the detection of the Legionella-DNA used here via primer labelling. Labelling via nucleotides required genomic DNA of at least 3000 cell equivalents as starting material as well as an increased personnel and experimental effort.

High-yield ligation-free assembly of DNA constructs with nucleosome positioning sequence repeats for single-molecule manipulation assays

Force and torque spectroscopy have provided unprecedented insights into the mechanical properties, conformational transitions, and dynamics of DNA and DNA-protein complexes, notably nucleosomes. Reliable single-molecule manipulation measurements require, however, specific and stable attachment chemistries to tether the molecules of interest. Here, we present a functionalization strategy for DNA that enables high-yield production of constructs for torsionally constrained and very stable attachment. The method is based on two subsequent PCRs: first ∼380 bp long DNA strands are generated that contain multiple labels, which are used as "megaprimers" in a second PCR to generate ∼kbp long double-stranded DNA constructs with multiple labels at the respective ends. To achieve high-force stability, we use dibenzocyclooctyne-based click chemistry for covalent attachment to the surface and biotin-streptavidin coupling to the bead. The resulting tethers are torsionally constrained and extremely stable under load, with an average lifetime of 70 ± 3 h at 45 pN. The high yield of the approach enables nucleosome reconstitution by salt dialysis on the functionalized DNA, and we demonstrate proof-of-concept measurements on nucleosome assembly statistics and inner turn unwrapping under force. We anticipate that our approach will facilitate a range of studies of DNA interactions and nucleoprotein complexes under forces and torques.

Characterization of a Novel Thermostable DNA Lyase Used To Prepare DNA for Next-Generation Sequencing

Recently, we constructed a hybrid thymine DNA glycosylase (hyTDG) by linking a 29-amino acid sequence from the human thymine DNA glycosylase with the catalytic domain of DNA mismatch glycosylase (MIG) from M. thermoautotrophicum, increasing the overall activity of the glycosylase. Previously, it was shown that a tyrosine to lysine (Y126K) mutation in the catalytic site of MIG could convert the glycosylase activity to a lyase activity. We made the corresponding mutation to our hyTDG to create a hyTDG-lyase (Y163K). Here, we report that the hybrid mutant has robust lyase activity, has activity over a broad temperature range, and is active under multiple buffer conditions. The hyTDG-lyase cleaves an abasic site similar to endonuclease III (Endo III). In the presence of β-mercaptoethanol (β-ME), the abasic site unsaturated aldehyde forms a β-ME adduct. The hyTDG-lyase maintains its preference for cleaving opposite G, as with the hyTDG glycosylase, and the hyTDG-lyase and hyTDG glycosylase can function in tandem to cleave T:G mismatches. The hyTDG-lyase described here should be a valuable tool in studies examining DNA damage and repair. Future studies will utilize these enzymes to quantify T:G mispairs in cells, tissues, and genomic DNA using next-generation sequencing.

Synthesis of Cy5-Labelled C5-Alkynyl-modified cytidine triphosphates via Sonogashira coupling for DNA labelling

New applications of palladium-catalyzed Sonogashira-type cross-coupling reaction between C5-halogenated 2'-deoxycytidine-5'-monophosphate and novel cyanine dyes with a terminal alkyne group have been developed. The present methodology allows to synthesize of fluorescently labeled C5-nucleoside triphosphates with different acetylene linkers between the fluorophore and pyrimidine base in good to excellent yields under mild reaction conditions. Modified 2'-deoxycytidine-5'-triphosphates were shown to be good substrates for DNA polymerases and were incorporated into the DNA by polymerase chain reaction.

Electrochemical bioassay coupled to LAMP reaction for determination of high-risk HPV infection in crude lysates

Electrochemical (EC) detection of DNA biomarkers represents an interesting tool in molecular oncology due to its sensitivity, simplicity, low cost or rapid times of measurement. However, majority of EC assays, same as most optical-based techniques, require preceding DNA extraction step to remove other cellular components, making these assays more laborious and time-consuming. One option to circumvent this is to use LAMP (loop-mediated amplification), an isothermal amplification technique that can amplify DNA directly in crude lysates in a short time at a constant temperature. Here, we coupled the LAMP reaction with EC readout to detect DNA from the two most common oncogenic human papillomavirus (HPV) types that cause cervical cancer in women, i.e. HPV 16 and HPV 18, directly in crude lysates without a need for DNA extraction step. We show that in crude lysates, the LAMP reaction was superior to PCR, with very good selectivity on a panel of cancer cell lines and with high sensitivity, enabling detection of HPV DNA from as few as 10 cells. As a proof of principle, we applied the assay to nineteen clinical samples both from uninfected women and from women suffering from cervical precancerous lesions caused by HPV 16 or HPV 18 genotypes. Clinical samples were simply boiled for 5 min in homogenization buffer without DNA extraction step, and amplified with LAMP. We obtained excellent concordance of our assay with PCR, reaching 100% sensitivity for both genotypes, 81.82% specificity for HPV 16 and 94.12% specificity for HPV 18. Proposed assay could be a straightforward, simple, rapid and sensitive alternative for early diagnostics of precancerous cervical lesions.

FISH Going Meso-Scale: A Microscopic Search for Chromatin Domains

The intimate relationships between genome structure and function direct efforts toward deciphering three-dimensional chromatin organization within the interphase nuclei at different genomic length scales. For decades, major insights into chromatin structure at the level of large-scale euchromatin and heterochromatin compartments, chromosome territories, and subchromosomal regions resulted from the evolution of light microscopy and fluorescence in situ hybridization. Studies of nanoscale nucleosomal chromatin organization benefited from a variety of electron microscopy techniques. Recent breakthroughs in the investigation of mesoscale chromatin structures have emerged from chromatin conformation capture methods (C-methods). Chromatin has been found to form hierarchical domains with high frequency of local interactions from loop domains to topologically associating domains and compartments. During the last decade, advances in super-resolution light microscopy made these levels of chromatin folding amenable for microscopic examination. Here we are reviewing recent developments in FISH-based approaches for detection, quantitative measurements, and validation of contact chromatin domains deduced from C-based data. We specifically focus on the design and application of Oligopaint probes, which marked the latest progress in the imaging of chromatin domains. Vivid examples of chromatin domain FISH-visualization by means of conventional, super-resolution light and electron microscopy in different model organisms are provided.

Rolling circle amplification with fluorescently labeled dUTP-balancing the yield and degree of labeling

Detection methods based on rolling circle amplification (RCA) have been applied to a large number of targets in molecular biology. The key feature of RCA-based methods as well as other nucleic acid amplification methods is their exceptional sensitivity, which allows the detection of molecules at low concentrations, achieved by signal amplification due to nucleic acid magnification and subsequent detection. Variations on the method, such as immuno-RCA, extend the range of potential targets that can be detected. Employing fluorescently labeled nucleotides for direct incorporation into an amplification product is an attractive method for RCA product detection. However, the effectiveness of this approach remains doubtful. In our study, we utilized different modified dUTPs, including sulfo-cyanine3-dUTP, sulfo-cyanine5-dUTP, sulfo-cyanine5.5-dUTP, BDP-FL-dUTP, and amino-11-dUTP, to investigate whether the properties of the fluorophore used for modification affected the reaction yield and effectiveness of incorporation of nucleotide analogs by phi29 DNA polymerase. Among the modified dUTPs, sulfo-cyanine3-dUTP demonstrated the highest incorporation effectiveness, equal to 4-9 labels per 1000 nucleotides. The mean length of the RCA product was estimated to be approximately 175,000 nucleotides. The total increase in fluorescence from a single target/product complex was 850 times. The results obtained in the study illustrate the possibility of successful application of nucleotide analogs for RCA detection and present quantitative characteristics of fluorescently labeled dUTPs to be incorporated into RCA products.

L-DNA-tagged fluorescence in situ hybridization for highly sensitive imaging of RNAs in single cells

We report an effective fluorescence in situ hybridization strategy, named l-DNA tagged FISH (LT-FISH), for highly sensitive RNA detection in fixed cultured cells. LT-FISH includes two-step hybridization processes with a l-d chimera oligonucleotide probe and a fluorescence-labeled PCR product tethering a l-DNA tag. The degree of fluorescence enhancement, depending on the length of PCR products, was up to 14-fold when the 606 bp product was used. Endogenous mRNA and miRNA in cancer cells were visualized by utilizing this l-DNA-mediated signal amplification technique.

Fluorescent Tricyclic Cytidine Analogues as Substrates for Retroviral Reverse Transcriptases

We report on the ability of the reverse transcriptases (RTs) from avian myeloblastosis virus (AMV), Moloney murine leukemia virus (M-MLV), and human immunodeficiency virus 1 (HIV-1) to generate labeled DNA using the fluorescent tricyclic cytidine analogues d(tC)TP and d(^DEA tC)TP as substrates. Michaelis-Menten kinetics for the insertion of these analogues show V_max /K_M from 0.0-5 times that of natural dCTP across from G, depending on the polymerase and whether the template is RNA or DNA. The analogues are prone to misinsertion across from adenosine with both RNA and DNA templates. Elongation after analogue insertion is efficient with RNA templates, but the analogues cause stalling after insertion with DNA templates. A model reverse transcription assay using HIV-1-RT, including RNA-dependent DNA synthesis, degradation of the RNA template by the RT's RNase H activity, and synthesis of a second DNA strand to form fluorescently labeled dsDNA, shows that d(tC)TP and d(^DEA tC)TP are compatible with a complete reverse transcription cycle in vitro.

The Mechanical Properties of RNA-DNA Hybrid Duplex Stretched by Magnetic Tweezers

RNA can anneal to its DNA template to generate an RNA-DNA hybrid (RDH) duplex and a displaced DNA strand, termed R-loop. RDH duplex occupies up to 5% of the mammalian genome and plays important roles in many biological processes. The functions of RDH duplex are affected by its mechanical properties, including the elasticity and the conformation transitions. The mechanical properties of RDH duplex, however, are still unclear. In this work, we studied the mechanical properties of RDH duplex using magnetic tweezers in comparison with those of DNA and RNA duplexes with the same sequences. We report that the contour length of RDH duplex is ∼0.30 nm/bp, and the stretching modulus of RDH duplex is ∼660 pN, neither of which is sensitive to NaCl concentration. The persistence length of RDH duplex depends on NaCl concentration, decreasing from ∼63 nm at 1 mM NaCl to ∼49 nm at 500 mM NaCl. Under high tension of ∼60 pN, the end-opened RDH duplex undergoes two distinct overstretching transitions; at high salt in which the basepairs are stable, it undergoes the nonhysteretic transition, leading to a basepaired elongated structure, whereas at low salt, it undergoes a hysteretic peeling transition, leading to the single-stranded DNA strand under force and the single-stranded RNA strand coils. The peeled RDH is difficult to reanneal back to the duplex conformation, which may be due to the secondary structures formed in the coiled single-stranded RNA strand. These results help us understand the full picture of the structures and mechanical properties of nucleic acid duplexes in solution and provide a baseline for studying the interaction of RDH with proteins at the single-molecule level.

dUTPs conjugated with zwitterionic Cy3 or Cy5 fluorophore analogues are effective substrates for DNA amplification and labelling by Taq polymerase

To develop structural modifications of dNTPs that are compatible with Taq DNA polymerase activity, we synthesized eight dUTP derivatives conjugated with Cy3 or Cy5 dye analogues that differed in charge and charge distribution throughout the fluorophore. These dUTP derivatives and commercial Cy3- and Cy5-dUTP were studied in Taq polymerase-dependent polymerase chain reactions (PCRs) and in primer extension reactions using model templates containing one, two and three adjacent adenine nucleotides. The relative amounts of amplified DNA and the kinetic parameters Km and Vmax characterizing the incorporation of labelled dUMPs have been estimated using fluorescence measurements and analysed. The dUTPs labelled with electroneutral zwitterionic analogues of Cy3 or Cy5 fluorophores were used by Taq polymerase approximately one order of magnitude more effectively than the dUTPs labelled with negatively charged analogues of Cy3 or Cy5. The nucleotidyl transferase activity of Taq polymerase was also observed and resulted in the addition of dUMPs labelled with electroneutral or positively charged fluorophores to the 3' ends of DNA. The introduction of mutually compensating charges into fluorophores or other functional groups conjugated to dNTPs can be considered a basis for the creation of PCR-compatible modified nucleoside triphosphates.

Comparative Study of Novel Fluorescent Cyanine Nucleotides: Hybridization Analysis of Labeled PCR Products Using a Biochip

This study investigated the synthesis and substrate properties of Cy5-labeled dUTP derivatives with different substituents, linkers between the dye unit and pyrimidine heterocycle and fluorophore charges. Fluorescently labeled nucleoside triphosphates were studied as substrates using multiplex PCR with Taq and Vent (exo-) DNA polymerases, the typical representatives of the A and B polymerase families. The efficiency of nucleotide incorporation during PCR was assessed with a multi-parameter hybridization analysis using a diagnostic DNA microarray. The hybridization analysis indirectly estimates the incorporation efficiency of dye-labeled nucleotides in multiplex PCR. Our results demonstrated higher efficiencies of substrates with electrically neutral dyes than electropositive and electronegative Cy5 residues.

Structural Basis for the KlenTaq DNA Polymerase Catalysed Incorporation of Alkene- versus Alkyne-Modified Nucleotides

Efficient incorporation of modified nucleotides by DNA polymerases is essential for many cutting-edge biomolecular technologies. The present study compares the acceptance of either alkene- or alkyne-modified nucleotides by KlenTaq DNA polymerase and provides structural insights into how 7-deaza-adenosine and deoxyuridine with attached alkene-modifications are incorporated into the growing DNA strand. Thereby, we identified modified nucleotides that prove to be superior substrates for KlenTaq DNA polymerase compared with their natural analogues. The knowledge can be used to guide future design of functionalized nucleotide building blocks.

Single-Molecule Analysis of Pre-mRNA Splicing with Colocalization Single-Molecule Spectroscopy (CoSMoS)

Recent development of single-molecule techniques to study pre-mRNA splicing has provided insights into the dynamic nature of the spliceosome. Colocalization single-molecule spectroscopy (CoSMoS) allows following spliceosome assembly in real time at single-molecule resolution in the full complexity of cellular extracts. A detailed protocol of CoSMoS has been published previously (Anderson and Hoskins, Methods Mol Biol 1126:217-241, 2014). Here, we provide an update on the technical advances since the first CoSMoS studies including slide surface treatment, data processing, and representation. We describe various labeling strategies to generate RNA reporters with multiple dyes (or other moieties) at specific locations.

The Toolbox for Modified Aptamers

Aptamers are nucleic acid-based scaffolds that can bind with high affinity to a variety of biological targets. Aptamers are identified from large DNA or RNA libraries through a process of directed molecular evolution (SELEX). Chemical modification of nucleic acids considerably increases the functional and structural diversity of aptamer libraries and substantially increases the affinity of the aptamers. Additionally, modified aptamers exhibit much greater resistance to biodegradation. The evolutionary selection of modified aptamers is conditioned by the possibility of the enzymatic synthesis and replication of non-natural nucleic acids. Wild-type or mutant polymerases and their non-natural nucleotide substrates that can support SELEX are highlighted in the present review. A focus is made on the efforts to find the most suitable type of nucleotide modifications and the engineering of new polymerases. Post-SELEX modification as a complementary method will be briefly considered as well.

Functionalized tricyclic cytosine analogues provide nucleoside fluorophores with improved photophysical properties and a range of solvent sensitivities

Tricyclic cytosines (tC and tC(O) frameworks) have emerged as a unique class of fluorescent nucleobase analogues that minimally perturb the structure of B-form DNA and that are not quenched in duplex nucleic acids. Systematic derivatization of these frameworks is a likely approach to improve on and diversify photophysical properties, but has not so far been examined. Synthetic methods were refined to improve on tolerance for electron-donating and electron-withdrawing groups, resulting in a series of eight new, fluorescent cytidine analogues. Photophysical studies show that substitution of the framework results in a pattern of effects largely consistent across tC and tC(O) and provides nucleoside fluorophores that are brighter than either parent. Moreover, a range of solvent sensitivities is observed, offering promise that this family of probes can be extended to new applications that require reporting on the local environment.

Torsionally constrained DNA for single-molecule assays: an efficient, ligation-free method

Controlled twisting of individual, double-stranded DNA molecules provides a unique method to investigate the enzymes that alter DNA topology. Such twisting requires a single DNA molecule to be torsionally constrained. This constraint is achieved by anchoring the opposite ends of the DNA to two separate surfaces via multiple bonds. The traditional protocol for making such DNA involves a three-way ligation followed by gel purification, a laborious process that often leads to low yield both in the amount of DNA and the fraction of molecules that is torsionally constrained. We developed a simple ligation-free procedure for making torsionally constrained DNA via polymerase chain reaction (PCR). This PCR protocol used two 'megaprimers', 400-base-pair long double-stranded DNA that were labelled with either biotin or digoxigenin. We obtained a relatively high yield of gel-purified DNA (∼500 ng/100 µl of PCR reaction). The final construct in this PCR-based method contains only one labelled strand in contrast to the traditional construct in which both strands of the DNA are labelled. Nonetheless, we achieved a high yield (84%) of torsionally constrained DNA when measured using an optical-trap-based DNA-overstretching assay. This protocol significantly simplifies the application and adoption of torsionally constrained assays to a wide range of single-molecule systems.

Structures of KOD and 9°N DNA polymerases complexed with primer template duplex

Replicate it: Structures of KOD and 9°N DNA polymerases, two enzymes that are widely used to replicate DNA with highly modified nucleotides, were solved at high resolution in complex with primer/template duplex. The data elucidate substrate interaction of the two enzymes and pave the way for further optimisation of the enzymes and substrates.

Interactions of non-polar and "Click-able" nucleotides in the confines of a DNA polymerase active site

Modified nucleotides play a paramount role in many cutting-edge biomolecular techniques. The present structural study highlights the plasticity and flexibility of the active site of a DNA polymerase while incorporating non-polar "Click-able" nucleotide analogs and emphasizes new insights into rational design guidelines for modified nucleotides.

Structures of KlenTaq DNA polymerase caught while incorporating C5-modified pyrimidine and C7-modified 7-deazapurine nucleoside triphosphates

The capability of DNA polymerases to accept chemically modified nucleotides is of paramount importance for many biotechnological applications. Although these analogues are widely used, the structural basis for the acceptance of the unnatural nucleotide surrogates has been only sparsely explored. Here we present in total six crystal structures of modified 2'-deoxynucleoside-5'-O-triphosphates (dNTPs) carrying modifications at the C5 positions of pyrimidines or C7 positions of 7-deazapurines in complex with a DNA polymerase and a primer/template complex. The modified dNTPs are in positions poised for catalysis leading to incorporation. These structural data provide insight into the mechanism of incorporation and acceptance of modified dNTPs. Our results open the door for rational design of modified nucleotides, which should offer great opportunities for future applications.

Enzymatic synthesis of 8-vinyl- and 8-styryl-2'-deoxyguanosine modified DNA--novel fluorescent molecular probes

Fluorescent analogs of the natural nucleobases are widely used as molecular probes for investigating DNA hybridization and topology. In this study the guanosine analogs 8-vinyl- and 8-styryl-2'-deoxyguanosine were synthesized and converted into the corresponding 5'-triphosphates. These C8 modified nucleotides were processed by various DNA polymerases to create fluorescent DNA. Whereas the 8-styryl modified nucleotide somewhat hampers DNA synthesis 8-vinyl-2'-deoxyguanosine is processed by DNA polymerases emphasizing the broad applicability as a molecular probe for fluorescence spectroscopy.

Highly fluorescent 5-(5,6-dimethoxybenzothiazol-2-yl)-2'-deoxyuridine 5'-triphosphate as an efficient substrate for DNA polymerases

We herein describe the synthesis of fluorescent 5-(5,6-dimethoxybenzothiazol-2-yl)-2'-deoxyuridine 5'-triphosphate (d(bt)UTP) and primer extension reactions using d(bt)UTP. We also carried out primer extension reactions using the (bt)U template. B family DNA polymerases, such as KOD, Deep Vent (exo-), and 9°N(m) DNA polymerases, were effective for elongation with d(bt)UTP. Deep Vent (exo-) and KOD DNA polymerases have excellent fidelity for incorporating d(bt)UTP only at the site opposite the adenine template and only dATP when using the (bt)U template. Therefore, d(bt)UTP is an excellent fluorescent nucleotide that can be incorporated into DNA by DNA polymerases.

DNA and chromatin imaging with super-resolution fluorescence microscopy based on single-molecule localization

With the expansion of super-resolution fluorescence microscopy methods, it is now possible to access the organization of cells and materials at the nanoscale by optical means. This review discusses recent progress in super-resolution imaging of isolated and cell DNA using single-molecule localization methods. A high labeling density of photoswitchable fluorophores is crucial for these techniques, which can be provided by sequence independent DNA stains in which photoblinking reactions can be induced. In particular, unsymmetrical cyanine intercalating dyes in combination with special buffers can be used to image isolated DNA with a spatial resolution of 30-40 nm. For super-resolution imaging of chromatin, cell permeant cyanine dyes that bind the minor groove of DNA have the potential to become a useful alternative to the labeling of histones and other DNA-associated proteins. Other recent developments that are interesting in this context such as high density labeling methods or new DNA probes with photoswitching functionalities are also surveyed. Progress in labeling, optics, and single-molecule localization algorithms is being rapid, and it is likely to provide real insight into DNA structuring in cells and materials.

Structural basis for the synthesis of nucleobase modified DNA by Thermus aquaticus DNA polymerase

Numerous 2'-deoxynucleoside triphosphates (dNTPs) that are functionalized with spacious modifications such as dyes and affinity tags like biotin are substrates for DNA polymerases. They are widely employed in many cutting-edge technologies like advanced DNA sequencing approaches, microarrays, and single molecule techniques. Modifications attached to the nucleobase are accepted by many DNA polymerases, and thus, dNTPs bearing nucleobase modifications are predominantly employed. When pyrimidines are used the modifications are almost exclusively at the C5 position to avoid disturbing of Watson-Crick base pairing ability. However, the detailed molecular mechanism by which C5 modifications are processed by a DNA polymerase is poorly understood. Here, we present the first crystal structures of a DNA polymerase from Thermus aquaticus processing two C5 modified substrates that are accepted by the enzyme with different efficiencies. The structures were obtained as ternary complex of the enzyme bound to primer/template duplex with the respective modified dNTP in position poised for catalysis leading to incorporation. Thus, the study provides insights into the incorporation mechanism of the modified nucleotides elucidating how bulky modifications are accepted by the enzyme. The structures show a varied degree of perturbation of the enzyme substrate complexes depending on the nature of the modifications suggesting design principles for future developments of modified substrates for DNA polymerases.

A novel screening method for competitive FRET-aptamers applied to E. coli assay development

A novel high-throughput screening method is described in which a family of DNA aptamers selected against E. coli outer membrane proteins (OMPs) is subjected to PCR in the presence of fluorophore-dUTP conjugates using Deep Vent® exo- polymerase. The fluorophore-doped aptamers and their complementary strands are then heated to render them single-stranded and screened in filter well microtiter plates for fluorescence resonance energy transfer (FRET) assay potential. Using this system, a superior competitive FRET-aptamer designated EcO 4R was identified and the location of its putative binding pocket was determined by individually testing FRET potential in each of the secondary loop structures. By labeling the binding pocket with Alexa Fluor (AF) 647 and binding the aptamer to heavily Black Hole Quencher-3 (BHQ-3)-labeled E. coli bacteria, detection of as few as 30 live unlabeled E. coli per ml was achieved in a competitive displacement FRET assay format. The far red fluorescence emission enables detection in largely blue-green autofluorescent matrices. In addition, the competitive transfer of AF 647-EcO-4R aptamer to unlabeled E. coli cells after a 15 min equilibration period was verified by fluorescence microscopy. The present study also demonstrated that high aptamer affinity is not well correlated with competitive FRET potential.

CyDNA: synthesis and replication of highly Cy-dye substituted DNA by an evolved polymerase

DNA not only transmits genetic information but can also serve as a versatile supramolecular scaffold. Here we describe a strategy for the synthesis and replication of DNA displaying hundreds of substituents using directed evolution of polymerase function by short-patch compartmentalized self-replication (spCSR) and the widely used fluorescent dye labeled deoxinucleotide triphosphates Cy3-dCTP and Cy5-dCTP as substrates. In just two rounds of spCSR selection, we have isolated a polymerase that allows the PCR amplification of double stranded DNA fragments up to 1kb, in which all dC bases are substituted by its fluorescent dye-labeled equivalent Cy3- or Cy5-dC. The resulting "CyDNA" displays hundreds of aromatic heterocycles on the outside of the DNA helix and is brightly colored and highly fluorescent. CyDNA also exhibits significantly altered physicochemical properties compared to standard B-form DNA, including loss of silica and intercalating dye binding, resistance to cleavage by some endonucleases, an up to 40% increased apparent diameter as judged by atomic force microscopy and organic phase partitioning during phenol extraction. CyDNA also displays very bright fluorescence enabling significant signal gains in microarray and microfluidic applications. CyDNA represents a step toward a long-term goal of the encoded synthesis of DNA-based polymers of programmable and evolvable sequence and properties.

High density labeling of polymerase chain reaction products with the fluorescent base analogue tCo

Fluorescent DNA of high molecular weight is an important tool for studying the physical properties of DNA and DNA-protein interactions, and it plays a key role in modern biotechnology for DNA sequencing and detection. While several DNA polymerases can incorporate large numbers of dye-linked nucleotides into primed DNA templates, the amplification of the resulting densely labeled DNA strands by polymerase chain reaction (PCR) is problematic. Here, we report a method for high density labeling of DNA in PCR reactions employing the 5'-triphosphate of 1,3-diaza-2-oxo-phenoxazine (tCo) and Deep Vent DNA polymerase. tCo is a fluorescent cytosine analogue that absorbs and emits light at 365 and 460 nm, respectively. We obtained PCR products that were fluorescent enough to directly visualize them in a gel by excitation with long UV light, thus eliminating the need for staining with ethidium bromide. Reactions with Taq polymerase failed to produce PCR products in the presence of only small amounts of dtCoTP. A comparative kinetic study of Taq and Deep Vent polymerase revealed that Taq polymerase, although it inserts dtCoTP with high efficiency opposite G, is prone to forming mutagenic tCo-A base pairs and does not efficiently extend base pairs containing tCo. These kinetics features explain the poor outcome of the PCR reactions with Taq polymerase. Since tCo substitutes structurally for cytosine, the presented labeling method is believed to be less invasive than labeling with dye-linked nucleotides and, therefore, produces DNA that is ideally suited for biophysical studies.

Long, processive enzymatic DNA synthesis using 100% dye-labeled terminal phosphate-linked nucleotides

We demonstrate the efficient synthesis of DNA with complete replacement of the four deoxyribonucleoside triphosphate (dNTP) substrates with nucleotides carrying fluorescent labels. A different, spectrally separable fluorescent dye suitable for single molecule fluorescence detection was conjugated to each of the four dNTPs via linkage to the terminal phosphate. Using these modified nucleotides, DNA synthesis by phi 29 DNA polymerase was observed to be processive for products thousands of bases in length, with labeled nucleotide affinities and DNA polymerization rates approaching unmodified dNTP levels. Results presented here show the compatibility of these nucleotides for single-molecule, real-time DNA sequencing applications.

The imaging probe development center and the production of molecular imaging probes

The Imaging Probe Development Center (IPDC), part of the NIH Roadmap for Medical Research Initiative (http://nihroadmap.nih.gov/) recently became fully operational at its newly refurbished laboratories in Rockville, MD. The IPDC (http://nihroadmap.nih.gov/molecularlibraries/ipdc/) is dedicated to the production of known and novel molecular imaging probes, with its services currently being used by the NIH intramural community, although in the future it is intended that the extramural community will also benefit from the IPDC's resources. The Center has been set up with the belief that molecular imaging, and the probe chemistry that underpins it, will constitute key technologies going forward. As part of the larger molecular libraries and imaging initiative, it is planned that the IPDC will work closely with scientists from the molecular libraries effort. Probes produced at the IPDC include optical, radionuclide and magnetic resonance agents and may encompass any type of contrast agent. As IPDC is a trans-NIH resource it can serve each of the 27 Institutes and Centers that comprise NIH so its influence can be expected to impact widely different subjects and disease conditions spanning biological research. IPDC is expected to play a key part in interdisciplinary collaborative imaging projects and to support translational R&D from basic research through clinical development, for all of the imaging modalities. Examples of probes already prepared or under preparation are outlined to illustrate the breadth of the chemistries undertaken together with a reference outline of the diverse biological applications for which the various probes are intended.

Sequence-specific control of azobenzene assemblies by molecular recognition of DNA

We investigated the molecular recognition between the amphiphile AzoAde, which is composed of azobenzene in the hydrophobic and adenine in the hydrophilic portion of the molecule, and oligonucleotides having a homogeneous base (dA30, dT30, dG30, and dC30) at the air-water interface. On the basis of the complementary base-pairing of DNA in the duplex, orderly arrangement of AzoAde on templated dT30 was examined using pi-A isotherm, UV-vis RAS, FT-IR RAS, and XPS measurements. Although there was little interaction between AzoAde and mismatched oligonucleotides (dA30, dG30, and dC30), AzoAde prepared on a dT30 subphase stoichiometrically assembled and interacted with dT30, subsequently forming a J-form assembly at the air-water interface. AFM observation of the LB films revealed the nanostructure of the J-formed AzoAde monolayer on the dT30 subphase as well as the domain structures of the H-formed monolayers on the other oligonucleotide subphases. Therefore, dT30 has a potential application as a template for assembling AzoAde at the air-water interface.

Competitive FRET-aptamer-based detection of methylphosphonic acid, a common nerve agent metabolite

Competitive fluorescence resonance energy transfer (FRET)-aptamer-based assay formats are described for one-step detection of methylphosphonic acid (MPA; a metabolite of several organophosphorus (OP) nerve agents). AminoMPA was attached to tosyl-magnetic beads and used for DNA aptamer selection from which one dominant aptamer sequence emerged. Two different FRET approaches were attempted. In one approach, the complementary DNA sequence was used as a template for labeling the aptamer with Alexa Fluor 546 (AF 546)-14-dUTP by asymmetric PCR. Following 3-dimensional (3-D), molecular modeling of the aptamer-MPA complex, a series of three fluoresceinated aptamers labeled at positions 50, 51, and 52 in the putative optimal binding pocket were synthesized. In both FRET formats, aminoMPA was linked to Black Hole Quencher (BHQ-1 or BHQ-2)-succinimides and allowed to bind the fluorescein or AF 546-labeled MPA aptamer. Following gel filtration to purify the labeled MPA aptamer-BHQ-aminoMPA FRET complexes, the complexes were competed against various concentrations of unlabeled MPA, MPA derivatives, and unrelated compounds in titration and cross-reactivity studies. Both approaches yielded low microgram per milliliter detection limits for MPA with generally low levels of cross-reactivity for unrelated compounds. However, the data suggest a pattern of traits that may effect the direction (lights on or off) and intensity of the FRET.

Novel FRET-based assay to detect reverse transcriptase activity using modified dUTP analogues

We have developed a novel continuous assay to measure reverse transcriptase (RT) polymerase activity. The assay uses fluorescence energy transfer measurements to detect the incorporation of complementary pairs of fluorescently labeled deoxyuridine into cDNA product. The fluorescently labeled dUTP substrates were prepared using commercially available reagents with a simple coupling reaction. The fluorescent dye pairs have significant spectral overlap which allows FRET interaction between dyes incorporated into the cDNA. Using a polyA/oligo dT primer/template, the assay can readily detect DNA polymerase activity from any viral reverse transcriptase enzyme. The reaction proceeds linearly over time, and the rate is proportional to the enzyme concentration. We used the assay to compare the thermostability of a number of wild-type and mutant viral RT enzymes. Our results indicate that the wild-type AMV (avian myeloblastosis virus) enzyme is slightly more stable at 43 degrees C than the HIV-1 (human immunodeficiency virus) or MMLV (Moloney murine leukemia virus) enzymes. The thermostability of the RT enzyme was dramatically increased by the presence of primer/template with the enzyme. We also used the assay to study the effects of inhibitors on HIV-1 RT polymerase activity. This assay may be highly useful for the identification and characterization of potent RT inhibitors which could be candidates for development as therapeutic antiviral agents.

Mutability of DNA polymerase I: implications for the creation of mutant DNA polymerases

DNA polymerases of the Family A catalyze the addition of deoxynucleotides to a primer with high efficiency, processivity, and selectivity-properties that are critical to their function both in nature and in the laboratory. These polymerases tolerate many amino acid substitutions, even in regions that are evolutionarily conserved. This tolerance can be exploited to create DNA polymerases with novel properties and altered substrate specificities, using rational design and molecular evolution. These efforts have focused mainly on the Family A DNA polymerises -Taq, E. coli Pol I, and T7 - because they are widely utilized in biotechnology today. The redesign of polymerases often requires knowledge of the function of specific residues in the protein, including those located in six evolutionarily conserved regions. The most well characterized of these are motifs A and B, which regulate the fidelity of replication and the incorporation of nucleotide analogs such as dideoxynucleotides. Regions that remain to be more thoroughly characterized are motif C, which is critical for catalysis, and motifs 1, 2 and 6, all of which bind to DNA primer or template. Several recently identified mutants with abilities to incorporate nucleotides with bulky adducts have mutations that are not located within conserved regions and warrant further study. Analysis of these mutants will help advance our understanding of how DNA polymerases select bases with high fidelity.