Development, characterization, and in vivo assessment of mucoadhesive nanoparticles containing fluconazole for the local treatment of oral candidiasis

Evaluation of in vivo and in vitro efficacy of solasonine/solamargine-loaded lipid-polymer hybrid nanoparticles against bladder cancer

Solasonine (SS) and solamargine (SM) are alkaloids known for their antioxidant and anticancer properties, which can be further enhanced by encapsulating them in nanoparticles. This led to a study on the potential therapeutic benefits of SS and SM against bladder cancer when encapsulated in lipid-polymer hybrid nanoparticles (LPHNP). The LPHNP loaded with SS/SM were prepared using the emulsion and sonication method and their physical-chemical properties characterized. The biological effects of these nanoparticles were then tested in both 2D and 3D bladder cancer cell culture models, as well as in a syngeneic orthotopic mouse model based on the MB49 cell line and ethanol epithelial injury. The LPHNP-SS/SM had an average size of 130 nm, a polydispersity index of 0.22 and a positive zeta potential, indicating the presence of chitosan coating on the nanoparticle surface. The dispersion of LPHNP-SS/SM was found to be monodispersed with a span index of 0.539, as measured by nanoparticle tracking analysis (NTA). The recrystallization index, calculated from DSC data, was higher for the LPHNP-SS/SM compared to LPHNPs alone, confirming the presence of alkaloids within the lipid matrix. The encapsulation efficiency (EE%) was also high, with 91.08 % for SS and 88.35 % for SM. Morphological analysis by AFM and Cryo-TEM revealed that the nanoparticles had a spherical shape and core-shell structure. The study showed that the LPHNP-SS/SM exhibited mucoadhesive properties by physically interacting with mucin, suggesting a potential improvement in interaction with mucous membrane. Both the free and nanoencapsulated SS/SM demonstrated dose-dependent cytotoxicity against bladder cancer cell lines after 24 and 72 h of treatment. In 3D bladder cell culture, the nanoencapsulated SS/SM showed an IC50 two-fold lower than free SS/SM. In vivo studies, the LPHNP-SS/SM displayed an antitumoral effect at high doses, leading to a significant reduction in bladder volume compared to the positive control. However, there were observed instances of systemic toxicity and liver damage, indicated by elevated levels of transaminases (TGO and TGP). Overall, these results indicate that the LPHNPs effectively encapsulated SS/SM, showing high encapsulation efficiency and stability, along with promising in vitro and in vivo antitumoral effects against bladder cancer. Further evaluation of its systemic toxicity effects is necessary to ensure its safety and efficacy for potential clinical application.

New Insights into Sources, Bioavailability, Health-Promoting Effects, and Applications of Chitin and Chitosan

Chitin and chitosan are mostly derived from the exoskeletons of crustaceans, insects, and fungi. Chitin is the second most abundant biopolymer after cellulose, and it is a fibrous polysaccharide which resists enzymatic degradation in the stomach but undergoes microbial fermentation in the colon, producing beneficial metabolites. Chitosan, which is more soluble in the alkaline small intestine, is more susceptible to enzymatic action. Both biopolymers show limited absorption into the bloodstream, with smaller particles exhibiting better bioavailability. The health effects include anti-inflammatory properties, potential in immune system modulation, impacts on cholesterol levels, and antimicrobial effects, with a specific focus on implications for gut health. Chitin and chitosan exhibit anti-inflammatory properties by interacting with immune cells, influencing cytokine production, and modulating immune responses, which may benefit conditions characterized by chronic inflammation. These biopolymers can impact cholesterol levels by binding to dietary fats and reducing lipid absorption. Additionally, their antimicrobial properties contribute to gut health by controlling harmful pathogens and promoting beneficial gut microbiota. This review explores the extensive health benefits and applications of chitin and chitosan, providing a detailed examination of their chemical compositions, dietary sources, and applications, and critically assessing their health-promoting effects in the context of human well-being.

Current paradigms in employing self-assembled structures: Drug delivery implications with improved therapeutic potential

Recent efforts have focused on developing improved drug delivery systems with enhanced therapeutic efficacy and minimal side effects. Micelles, self-assembled from amphiphilic block copolymers in aqueous solutions, have gained considerable attention for drug delivery. However, there is a need to further enhance their efficiency. These micelles offer benefits like biodegradability, biocompatibility, sustained drug release, and improved patient compliance. Yet, researchers must address stability issues and reduce toxicity. Nanoscale self-assembled structures have shown promise as efficient drug carriers, offering an alternative to conventional methods. Fine-tuning at the monomeric and molecular levels, along with structural modifications, is crucial for optimal drug release profiles. Various strategies, such as entrapping hydrophobic drugs and using polyethylene oxide diblock copolymer micelles to resist protein adsorption and cellular adhesion, protect the hydrophobic core from degradation. The polyethylene oxide corona also provides stealth properties, prolonging blood circulation for extended drug administration. Amphiphilic copolymers are attractive for drug delivery due to their adjustable properties, allowing control over micelle size and morphology. Emerging tools promise complex and multifunctional platforms. This article summarizes about the challenges as far as the use of micelles is concerned, including optimizing performance, rigorous pre-clinical and clinical research, and suggests further improvement for drug delivery efficacy.

Fast disintegrating dosage forms of mucoadhesive-based nanoparticles for oral insulin delivery: Optimization to in vivo evaluation

The aim of this work was to develop fast disintegrating dosage forms, including fast disintegrating tablets (FDTs) and films (FDFs), for oral insulin delivery incorporating mucoadhesive thiolated chitosan (TCS)-based nanoparticles (NPs). Cyclodextrin (CD)-insulin complexes were formed to prevent insulin from degradation and further optimally prepared NPs in order to improve the mucoadhesive properties. After that, these NPs were incorporated into the dosage forms and then evaluated for their morphology as well as physical and mechanical properties. The disintegration time, insulin content, mucoadhesive properties, insulin release, cytotoxicity, in vivo hypoglycemic effect, and stability of dosage forms were studied. Results showed that the CD-insulin complexes were successfully encapsulated into the mucoadhesive NPs. The 15 %w/w CD-insulin complex-loaded NPs, which were probably dispersed and/or fused into the dosage forms, showed promising characteristics, including rapid disintegration as well as good physical and mechanical properties to withstand erosion during handling and storage. The porous structure of the FDTs promoted liquid flow and induced rapid disintegration. The dosage forms provided buccal mucoadhesion before, during, and/or after the disintegration. The FDFs containing hydroxypropyl β-cyclodextrin (HPβCD)-insulin complex-loaded NPs increased mucoadhesion, increasing insulin release. Furthermore, these dosage forms provided excellent in vivo hypoglycemic response with a prolonged effect in diabetic mice and had no cytotoxicity toward the gingival fibroblast cells. In addition, they were stable at temperatures between 2 and 8 °C for three months. The results indicate that these formulations could be applied as promising dosage forms for use in oral insulin delivery.

Atorvastatin liposomes in a 3D-printed polymer film: a repurposing approach for local treatment of oral candidiasis

Oral candidiasis (OC) is an opportunistic fungal infection, common amongst the elderly and the immunocompromised. Unfortunately, the therapeutic efficacy of common antifungals is imperiled by the rise of antifungal drug resistance. An alternative promising therapeutic option possibly contributing to antifungal therapy is drug repurposing. Herein, we aimed to employ novel pharmaceutical drug delivery for enhancing the emerging antifungal potential of the hypocholesterolemic drug atorvastatin (ATV). ATV-propylene-glycol-liposomes (ATV/PG-Lip) were prepared then integrated in 3D-printed (3DP) mucoadhesive films comprising chitosan, polyvinyl-alcohol and hydroxypropyl methylcellulose, as an innovative blend, for the management of OC. ATV/PG-Lip demonstrated good colloidal properties of particle size (223.3 ± 2.1 nm), PDI (0.12 ± 0.001) and zeta potential (-18.2 ± 0.3 mV) with high entrapment efficiency (81.15 ± 1.88%) and sustained drug release. Also, ATV/PG-Lip showed acceptable three-month colloidal stability and in vitro cytocompatibility on human gingival fibroblasts. The developed 3DP-films exhibited controlled ATV release (79.4 ± 1.4% over 24 h), reasonable swelling and mucoadhesion (2388.4 ± 18.4 dyne/cm2). In vitro antifungal activity of ATV/PG-Lip was confirmed against fluconazole-resistant Candida albicans via minimum inhibitory concentration determination, time-dependent antifungal activity, agar diffusion and scanning electron microscopy. Further, ATV/PG-Lip@3DP-film exceeded ATV@3DP-film in amelioration of infection and associated inflammation in an in vivo oral candidiasis rabbit model. Accordingly, the results confirm the superiority of the fabricated ATV/PG-Lip@3DP-film for the management of oral candidiasis and tackling antifungal resistance.

Nanocellulose-gellan cross-linked scaffolds for vaginal delivery of fluconazole

The objective of this research is to formulate lyophilized fluconazole-loaded nanocellulose-gellan scaffolds cross-linked using trisodium trimetaphosphate as a vaginal drug delivery system. The effect of polymers (nanocellulose and gellan gum) and cross-linking agents on drug release and mucoadhesive strength were determined by approaching a two-factor three-level central composite experimental design. The optimal formulation of the fluconazole-loaded cross-linked rice or wheat nanocellulose-gellan based scaffolds comprised of the concentration of polymers (4.91 % w/v or 4.99 % w/v) and trisodium trimetaphosphate (16.43 % w/v or 15.83 % w/v), respectively. The infrared spectra confirmed the cross-linking of nanocellulose and gellan gum while the thermal graph revealed the higher thermal stability of cross-linked scaffolds. The diffractogram of the scaffolds unveiled their amorphous nature while the electron micrographs depict the porous nature of the fluconazole-loaded nanocellulose-gellan scaffolds. The phosphorylated cross-linked nanocellulose-gellan scaffolds represent more swelling (8-fold higher), porosity (>83 %), tensile strength (>34 MPa), and mucoadhesive strength (>1940 mN), and less enzymatic degradation rate over the non cross-linked scaffolds. The optimal batch of cross-linked nanocellulose-gellan scaffolds provided a sustained release of 99 % of fluconazole over 24 h with 1.19-fold higher ex-vivo vaginal permeation over the native scaffolds. In addition, the phosphorylated nanocellulose-gellan based scaffolds exhibit improved antifungal activity and non-cytotoxicity.

Response Surface Methodology (RSM) Powered Formulation Development, Optimization and Evaluation of Thiolated Based Mucoadhesive Nanocrystals for Local Delivery of Simvastatin

In oral administration systems, mucoadhesive polymers are crucial for drug localization and target-specific activities. The current work focuses on the application of thiolated xanthan gum (TXG) to develop and characterize a novel mucoadhesive nanocrystal (NC) system of simvastatin (SIM). Preparation of SIM-NC was optimized using response surface methodology (RSM) coupled with statistical applications. The concentration of Pluronic F-127 and vacuum pressure were optimized by central composite design. Based on this desirable approach, the prerequisites of the optimum formulation can be achieved by a formulation having 92.568 mg of F-127 and 77.85 mbar vacuum pressure to result in EE of 88.8747% and PS of 0.137.835 nm. An optimized formulation was prepared with the above conditions along with xanthan gum (XG) and TXG and various parameters were evaluated. A formulation containing TXG showed 98.25% of SIM at the end of 96 h. Regarding the mucoadhesion potential evaluated by measuring zeta potential, TXG-SIM-NC shoed the maximum zeta potential of 16,455.8 ± 869 mV at the end of 6 h. The cell viability percentage of TXG-SIM-NC (52.54 ± 3.4% with concentration of 50 µg/mL) was less than the plain SIM, with XG-SIM-NC showing the highest cytotoxicity on HSC-3 cells. In vivo pharmacokinetic studies confirm the enhanced bioavailability of formulated mucoadhesive systems of SIM-NC, with TXG-SIM-NC exhibiting the maximum.

Assessment of nano lipid carrier loaded transdermal patch of rizatriptan benzoate

BACKGROUND

Migraine is a neurological disorder and is accompanied by different painful episodes. Hence the maintenance of a steady-state concentration of drug can be beneficial for the patients suffering with migraine. The present investigation focuses on the development of nano lipid carriers (NLCs) loaded transdermal patch of rizatriptan benzoate to sustain the effect of the drug for the enhancement of therapeutic effects.

METHOD

Stearic acid and peanut oil were used to make the NLCs. A central composite design was employed to observe the effect of formulation factors like solid lipid ratio, phase volume ratio, and concentration of surfactants on the formation of nanoparticles. The effects were evaluated for the responses like particle size and entrapment of the drug in the nanocarriers. The optimized formulation was subjected to compatibility, thermal, surface characteristics, and surface morphology studies. The optimized formulation was dispersed in HPMC 15CPS and PVP K30 polymer matrix and the transdermal patch was evaluated for its mechanical properties, drug release study, and skin irritation study.

RESULTS

The experimental design was suitable to produce nanosized stable lipid carriers of the drug with high drug entrapment. The drug and excipients were found to be compatible. The thermal and surface characteristics study proved the high loading of drug in the nanoparticles. The surface morphology study showed the formation of irregular-shaped NLCs. The transdermal patch had good mechanical properties. The ex vivo study of the formulated patch showed a sustained release of the drug over 24h. No skin irritation was reported from the transdermal patch.

CONCLUSION

Therefore, it can be concluded that the nanoparticles loaded transdermal patch of rizatriptan benzoate can be promising in controlling the divergent phases of migraine.

Drug-delivery nanoparticles for bone-tissue and dental applications

The use of nanoparticles as biomaterials with applications in the biomedical field is growing every day. These nanomaterials can be used as contrast imaging agents, combination therapy agents, and targeted delivery systems in medicine and dentistry. Usually, nanoparticles are found as synthetic or natural organic materials, such as hydroxyapatite, polymers, and lipids. Besides that, they are could also be inorganic, for instance, metallic or metal-oxide-based particles. These inorganic nanoparticles could additionally present magnetic properties, such as superparamagnetic iron oxide nanoparticles. The use of nanoparticles as drug delivery agents has many advantages, for they help diminish toxicity effects in the body since the drug dose reduces significantly, increases drugs biocompatibility, and helps target drugs to specific organs. As targeted-delivery agents, one of the applications uses nanoparticles as drug delivery particles for bone-tissue to treat cancer, osteoporosis, bone diseases, and dental treatments such as periodontitis. Their application as drug delivery agents requires a good comprehension of the nanoparticle properties and composition, alongside their synthesis and drug attachment characteristics. Properties such as size, shape, core-shell designs, and magnetic characteristics can influence their behavior inside the human body and modify magnetic properties in the case of magnetic nanoparticles. Based on that, many different studies have modified the synthesis methods for these nanoparticles and developed composite systems for therapeutics delivery, adapting, and improving magnetic properties, shell-core designs, and particle size and nanosystems characteristics. This review presents the most recent studies that have been presented with different nanoparticle types and structures for bone and dental drug delivery.

Development, optimization, and evaluation of a nanostructured lipid carrier of sesame oil loaded with miconazole for the treatment of oral candidiasis

Candida albicans is the fungus responsible for oral candidiasis, a prevalent disease. The development of antifungal-based delivery systems has always been a major challenge for researchers. This study was designed to develop a nanostructured lipid carrier (NLC) of sesame oil (SO) loaded with miconazole (MZ) that could overcome the solubility problems of MZ and enhance its antifungal activity against oral candidiasis. In the formulation of this study, SO was used as a component of a liquid lipid that showed an improved antifungal effect of MZ. An optimized MZ-loaded NLC of SO (MZ-SO NLC) was used, based on a central composite design-based experimental design; the particle size, dissolution efficiency, and inhibition zone against oral candidiasis were chosen as dependent variables. A software analysis provided an optimized MZ-SO NLC with a particle size of 92 nm, dissolution efficiency of 88%, and inhibition zone of 29 mm. Concurrently, the ex vivo permeation rate of the sheep buccal mucosa was shown to be significantly (p < .05) higher for MZ-SO NLC (1472 µg/cm²) as compared with a marketed MZ formulation (1215 µg/cm²) and an aqueous MZ suspension (470 µg/cm²). Additionally, an in vivo efficacy study in terms of the ulcer index against C. albicans found a superior result for the optimized MZ-SO NLC (0.5 ± 0.50) in a treated group of animals. Hence, it can be concluded that MZ, through an optimized NLC of SO, can treat candidiasis effectively by inhibiting the growth of C. albicans.

Alpha-mangostin and resveratrol, dual-drugs-loaded mucoadhesive thiolated chitosan-based nanoparticles for synergistic activity against colon cancer cells

Alpha-mangostin (M) and resveratrol (R), dual-drugs-loaded mucoadhesive thiolated chitosan-based nanoparticles (NPs) coated by Eudragit® S100 (S) were developed for colon-specific delivery and synergistic activity against colon cancer cells. The NPs were prepared by the ionotropic gelation method and coated with S. The particle size and zeta potential of NPs before and after the coating process were observed. The M and R loading efficiency, mucoadhesive properties, as well as release patterns were examined. Moreover, the activity against colon cancer cells of M, R, and NPs were studied for their synergistic activity. M and R-loaded NPs (MR-TNPs) were spherical in shape with sizes of around 540 nm and zeta potential of +39 mV. The S coating of MR-TNPs provided larger particle sizes which offered lower zeta potential. However, it created an increase in M and R loading, prevented M and R release at the upper gastrointestinal tract, and enhanced M and R reaching the colon. S dissolved at pH > 7.0 while thiolated chitosan formed the mucoadhesion, resulting in M and R remaining in the colon and allowing them to enter the colon cancer cells. The half-maximal inhibitory concentration values of NPs was dramatically decreased when M and R were dually loaded into the NPs, which indicated significantly higher activity against colon cancer cells. Moreover, M and R loading at this ratio applied synergistic efficiency. The results illustrated that NPs successfully loaded drugs and achieved synergistic efficiency. This system could be promising in facilitating targeted nanomedicines for the treatment of colon cancer.

In Vitro Comparative Study of Solid Lipid and PLGA Nanoparticles Designed to Facilitate Nose-to-Brain Delivery of Insulin

The brain insulin metabolism alteration has been addressed as a pathophysiological factor underlying Alzheimer's disease (AD). Insulin can be beneficial in AD, but its macro-polypeptide nature negatively influences the chances of reaching the brain. The intranasal (IN) administration of therapeutics in AD suggests improved brain-targeting. Solid lipid nanoparticles (SLNs) and poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) are promising carriers to deliver the IN-administered insulin to the brain due to the enhancement of the drug permeability, which can even be improved by chitosan-coating. In the present study, uncoated and chitosan-coated insulin-loaded SLNs and PLGA NPs were formulated and characterized. The obtained NPs showed desirable physicochemical properties supporting IN applicability. The in vitro investigations revealed increased mucoadhesion, nasal diffusion, and drug release rate of both insulin-loaded nanocarriers over native insulin with the superiority of chitosan-coated SLNs. Cell-line studies on human nasal epithelial and brain endothelial cells proved the safety IN applicability of nanoparticles. Insulin-loaded nanoparticles showed improved insulin permeability through the nasal mucosa, which was promoted by chitosan-coating. However, native insulin exceeded the blood-brain barrier (BBB) permeation compared with nanoparticulate formulations. Encapsulating insulin into chitosan-coated NPs can be beneficial for ensuring structural stability, enhancing nasal absorption, followed by sustained drug release.

Applications of Novel and Nanostructured Drug Delivery Systems for the Treatment of Oral Cavity Diseases

PURPOSE

Novel drug delivery systems (DDSs) hold great promise for the treatment of oral cavity diseases. The main objective of this article was to provide a detailed overview regarding recent advances in the use of novel and nanostructured DDSs in alleviating and treating unpleasant conditions of the oral cavity. Strategies to maximize the benefits of these systems in the treatment of oral conditions and future directions to overcome these issues are also discussed.

METHODS

Publications from the last 10 years investigating novel and nanostructured DDSs for pathologic oral conditions were browsed in a systematic search using the PubMed/MEDLINE, Web of Science, and Scopus databases. Research on applications of novel DDSs for periodontitis, oral carcinomas, oral candidiasis, xerostomia, lichen planus, aphthous stomatitis, and oral mucositis is summarized. A narrative exploratory review of the most recent literature was undertaken.

FINDINGS

Conventional systemic administration of therapeutic agents could exhibit high clearance of drugs from the bloodstream and low accumulation at the target site. In contrast, conventional topical systems face problems such as short residence time in the affected region and low patient compliance. Novel and nanostructured DDSs are among the most effective and commonly used methods for overcoming the problems of conventional DDSs. The main advantages of these systems are that they possess the ability to protect active agents from systemic and local clearance, enhance bioavailability and cellular uptake, and provide immediate or modified release of therapeutic agents after administration. In the design of local drug delivery devices such as nanofiber mats, films, and patches, components and excipients can significantly affect factors such as drug release rate, residence time in the oral cavity, and taste in the mouth. Choosing appropriate additives is therefore essential.

IMPLICATIONS

Local drug delivery devices such as nanofiber mats, nanoparticles, liposomes, hydrogels, films, and patches for oral conditions can significantly affect drug efficacy and safety. However, more precise clinical studies should be designed and conducted to confirm promising in vitro and in vivo results. In recent years, novel and nanostructured DDSs increasingly attracted the attention of researchers as a means of treatment and alleviation of oral diseases and unpleasant conditions. However, more clinical studies should be performed to confirm promising in vitro and in vivo results. To transform a successful laboratory model into a marketable product, the long-term stability of prepared formulations is essential. Also, proper scale-up methods with optimum preparation costs should be addressed.

Development and optimization of tibezonium iodide and lignocaine hydrochloride containing novel mucoadhesive buccal tablets: A pharmacokinetic investigation among healthy humans

OBJECTIVE

It is clinically important to deliver sustained-release mucoadhesive dosage of local anesthetic and antimicrobial agent for pain control. The current study aimed to develop and evaluate chitosan (CHI) based buccal mucoadhesive delivery for local release of tibezonium iodide (TBN) and lignocaine hydrochloride (LGN).

METHODS

Direct compression technique was employed, aided by other mucoadhesive polymers like hydroxypropylmethylcellulose (HPMC) and sodium alginate (SA) and evaluated for physicochemical and in vivo character.

RESULTS

Fourier transform infrared spectral analysis (FTIR), powdered X-ray diffraction (XRPD), and differential scanning calorimetry (DSC) absence of physical interaction between ingredients. The physical parameters complied with USP specifications for all formulations. Optimum swellability (551.9%) was offered from formulation TL15, containing 30% SA. Highest ex vivo mucoadhesive strength (24.79 g) and time (18.39 h) was found with TL8. Formulation TL8 also exhibited maximum in vivo residence time (11.37 h). Almost complete drug release at 6 h was possessed by formulation TL5 (HPMC and CHI, 20% each) for TBN (99.98%) and LGN (99.06%). The optimized formulation TL5 exhibited dosage stability up to 6 months at 75% relative humidity and retained drug contents. TL5 was well tolerated by the volunteers with no inflammation, pain or irritation found. Almost 73% of volunteers reported an increase in salivary secretion. The first-order salivary C_max of TBN and LGN were found as 16.02 and 7.80 µg/mL within 4 h, respectively.

CONCLUSION

Therefore, the sustained release mucoadhesive dosage form of TBN and LGN can be an effective and alternative option to conventional delivery.

Hybrid Nanoparticles as an Efficient Porphyrin Delivery System for Cancer Cells to Enhance Photodynamic Therapy

Photodynamic therapy (PDT) is a potential non-invasive approach for application in oncological diseases, based on the activation of a photosensitizer (PS) by light at a specific wavelength in the presence of molecular oxygen to produce reactive oxygen species (ROS) that trigger the death tumor cells. In this context, porphyrins are interesting PS because they are robust, have high chemical, photo, thermal, and oxidative stability, and can generate singlet oxygen (1O2). However, porphyrins exhibit low solubility and a strong tendency to aggregate in a biological environment which limits their clinical application. To overcome these challenges, we developed hybrid nanostructures to immobilize 5,10,15,20-tetrakis[(4-carboxyphenyl) thio-2,3,5,6-tetrafluorophenyl] (P), a new third-generation PS. The biological effect of this system was evaluated against bladder cancer (BC) cells with or without light exposition. The nanostructure composed of lipid carriers coated by porphyrin-chitosan (P-HNP), presented a size of ca. 130 nm and low polydispersity (ca. 0.25). The presence of the porphyrin-chitosan (P-chitosan) on lipid nanoparticle surfaces increased the nanoparticle size, changed the zeta potential to positive, decreased the recrystallization index, and increased the thermal stability of nanoparticles. Furthermore, P-chitosan incorporation on nanoparticles increased the stability and enhanced the self-organization of the system and the formation of spherical structures, as observed by small-angle X-ray scattering (SAXS) analysis. Furthermore, the immobilization process maintained the P photoactivity and improved the photophysical properties of PS, minimizing its aggregation in the cell culture medium. In the photoinduction assays, the P-HNP displayed high phototoxicity with IC50 3.2-folds lower than free porphyrin. This higher cytotoxic effect can be correlated to the high cellular uptake of porphyrin immobilized, as observed by confocal images. Moreover, the coated nanoparticles showed mucoadhesive properties interesting to its application in vivo. Therefore, the physical and chemical properties of nanoparticles may be relevant to improve the porphyrin photodynamic activity in BC cells.

Potent antifungal agents and use of nanocarriers to improve delivery to the infected site: A systematic review

There are four major classes of antifungals with the predominant mechanism of action being targeting of cell wall or cell membrane. As in other drugs, low solubility of these compounds has led to low bioavailability in target tissues. Enhanced drug dosages have effects such as toxicity, drug-drug interactions, and increased drug resistance by fungi. This article reviews the current state-of-the-art of antifungals, structure, mechanism of action, other usages, and toxic side effects. The emergence of nanoformulations to transport and uniformly release cargo at the target site is a boon in antifungal treatment. The article details research that lead to the development of nanoformulations of antifungals and potential advantages and avoidance of the lacunae characterizing conventional drugs. A range of nanoformulations based on liposomes, polymers are in various stages of research and their potential advantages have been brought out. It could be observed that under similar dosages, test models, and duration, nanoformulations provided enhanced activity, reduced toxicity, higher uptake and higher immunostimulatory effects. In most instances, the mechanism of antifungal activity of nanoformulations was similar to that of regular antifungal. There are possibilities of coupling multiple antifungals on the same nano-platform. Increased activity coupled with multiple mechanisms of action presents for nanoformulations a tremendous opportunity to overcome antifungal resistance. In the years to come, robust methods for the preparation of nanoformulations taking into account the repeatability and reproducibility in action, furthering the studies on nanoformulation toxicity and studies of human models are required before extensive use of nanoformulations as a prescribed drug.

Nanoparticles in Dentistry: A Comprehensive Review

In recent years, nanoparticles (NPs) have been receiving more attention in dentistry. Their advantageous physicochemical and biological properties can improve the diagnosis, prevention, and treatment of numerous oral diseases, including dental caries, periodontal diseases, pulp and periapical lesions, oral candidiasis, denture stomatitis, hyposalivation, and head, neck, and oral cancer. NPs can also enhance the mechanical and microbiological properties of dental prostheses and implants and can be used to improve drug delivery through the oral mucosa. This paper reviewed studies from 2015 to 2020 and summarized the potential applications of different types of NPs in the many fields of dentistry.

Three Polymers from the Sea: Unique Structures, Directional Modifications, and Medical Applications

With the increase of wounds and body damage, the clinical demand for antibacterial, hemostatic, and repairable biomaterials is increasing. Various types of biomedical materials have become research hotspots. Of these, and among materials derived from marine organisms, the research and application of alginate, chitosan, and collagen are the most common. Chitosan is mainly used as a hemostatic material in clinical applications, but due to problems such as the poor mechanical strength of a single component, the general antibacterial ability, and fast degradation speed research into the extraction process and modification mainly focuses on the improvement of the above-mentioned ability. Similarly, the research and modification of sodium alginate, used as a material for hemostasis and the repair of wounds, is mainly focused on the improvement of cell adhesion, hydrophilicity, degradation speed, mechanical properties, etc.; therefore, there are fewer marine biological collagen products. The research mainly focuses on immunogenicity removal and mechanical performance improvement. This article summarizes the source, molecular structure, and characteristics of alginate, chitosan, and collagen from marine organisms; and introduces the biological safety, clinical efficacy, and mechanism of action of these materials, as well as their extraction processes and material properties. Their modification and other issues are also discussed, and their potential clinical applications are examined.

Essential Oil-Loaded NLC for Potential Intranasal Administration

Complementary and alternative medicines represent an interesting field of research on which worldwide academics are focusing many efforts. In particular, the possibility to exploit pharmaceutical technology strategies, such as the nanoencapsulation, for the delivery of essential oils is emerging as a promising strategy not only in Italy but also all over the world. The aim of this work was the development of nanostructured lipid carriers (NLC) for the delivery of essential oils (Lavandula, Mentha, and Rosmarinus) by intranasal administration, an interesting topic in which Italian contributions have recently increased. Essential oil-loaded NLC, projected as a possible add-on strategy in the treatment of neurodegenerative diseases, were characterized in comparison to control formulations prepared with Tegosoft CT and Neem oil. Homogeneous (polydispersity index, PDI < 0.2) nanoparticles with a small size (<200 nm) and good stability were obtained. Morphological and physical-chemical studies showed the formation of different structures depending on the nature of the liquid oil component. In particular, NLC prepared with Lavandula or Rosmarinus showed the formation of a more ordered structure with higher cytocompatibility on two cell lines, murine and human fibroblasts. Taken together, our preliminary results show that optimized positively charged NLC containing Lavandula or Rosmarinus can be proposed as a potential add-on strategy in the treatment of neurodegenerative diseases through intranasal administration, due to the well-known beneficial effects of essential oils and the mucoadhesive properties of NLC.

Biodegradable polymers-based nanoparticles to enhance the antifungal efficacy of fluconazole against Candida albicans

BACKGROUND

Fluconazole (FLZ), a potent antifungal medication, is characterized by poor water solubility that reduced its antifungal efficacy.

OBJECTIVE

This study aimed to prepare FLZ-loaded polymeric nanoparticles (NPs) by using different polymers and techniques as a mean of enhancing the antifungal activity of FLZ.

METHODS

NP₁, NP₂, and NP₃ were prepared by the double emulsion/solvent evaporation method using PLGA, PCL, and PLA, respectively. The ionotropic pre-gelation technique was applied to prepare an alginate/chitosan-based formulation (NP₄). Particle size, zeta potential, encapsulation efficiency, and loading capacity were characterized. FT-IR spectra of FLZ, the polymers, and the prepared NPs were estimated. NP₄ was selected for further in-vitro release evaluation. The broth dilution method was used to assess the antifungal activity of NP₄ using a resistant clinical isolate of Candida albicans.

RESULTS

The double emulsion method produced smaller-sized particles (<390 nm) but with much lower encapsulation efficiency (< 12%). Alternatively, the ionic gelation method resulted in nanosized particles with a markedly higher encapsulation efficiency of about 40%. The FT-IR spectroscopy confirmed the loading of the FLZ molecules in the polymeric network of the prepared NPs. The release profile of NP₄ showed a burst initial release followed by a controlled pattern up to 24 hours with a higher percent released relative to the free FLZ suspension. NP₄ was able to reduce the value of MIC of FLZ by 20 times.

CONCLUSION

The antifungal activity of FLZ against C. albicans was enhanced markedly via its loading in the alginate/chitosan-based polymeric matrix of NP₄.

Assembly and antifungal effect of a new fluconazole-carrier nanosystem

Aim: To assemble, characterize and assess the antifungal effects of a new fluconazole (FLZ)-carrier nanosystem. Materials & methods: The nanosystem was prepared by loading FLZ on chitosan (CS)-coated iron oxide nanoparticles (IONPs). Antifungal effects were evaluated on planktonic cells (by minimum inhibitory concentration determination) and on biofilms (by quantification of cultivable cells, total biomass, metabolism and extracellular matrix) of Candida albicans and Candida glabrata. Results: Characterization results ratified the formation of a nanosystem (<320 nm) with FLZ successfully embedded. IONPs-CS-FLZ nanosystem reduced minimum inhibitory concentration values and, in general, showed similar antibiofilm effects compared with FLZ alone. Conclusion: IONPs-CS-FLZ nanosystem was more effective than FLZ mainly in inhibiting Candida planktonic cells. This nanocarrier has potential to fight fungal infections.

Fabrication and Characterization of Fast-Dissolving Films Containing Escitalopram/Quetiapine for the Treatment of Major Depressive Disorder

Major depressive disorder (MMD) is a leading cause of disability worldwide. Approximately one-third of patients with MDD fail to achieve response or remission leading to treatment-resistant depression (TRD). One of the psychopharmacological strategies to overcome TRD is using a combination of an antipsychotic as an augmenting agent with selective serotonin reuptake inhibitors (SSRIs). Among which, an atypical antipsychotic, quetiapine (QUE), and an SSRI, escitalopram (ESC), were formulated as a fixed-dose combination as a fast-dissolving film by coaxial electrospinning. The resultant fiber’s morphology was studied. SEM images showed that the drug-loaded fibers were smooth, un-beaded, and non-porous with a fiber diameter of 0.9 ± 0.1 µm, while the TEM images illustrated the distinctive layers of the core and shell, confirming the successful preparation of these fibers. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies confirmed that both drugs were amorphously distributed within the drug-loaded fibers. The drug-loaded fibers exhibited a disintegration time of 2 s, which accelerated the release of both drugs (50% after 5 min) making it an attractive formulation for oral mucosal delivery. The ex vivo permeability study demonstrated that QUE was permeated through the buccal membrane, but not ESC that might be hindered by the buccal epithelium and the intercellular lipids. Overall, the developed coaxial fibers could be a potential buccal dosage form that could be attributed to higher acceptability and adherence among vulnerable patients, particularly mentally ill patients.

A comparison study of lipid and polymeric nanoparticles in the nasal delivery of meloxicam: Formulation, characterization, and in vitro evaluation

With the increasingly widespread of central nervous system (CNS) disorders and the lack of sufficiently effective medication, meloxicam (MEL) has been reported as a possible medication for Alzheimer's disease (AD) management. Unfortunately, following the conventional application routes, the low brain bioavailability of MEL forms a significant limitation. The intranasal (IN) administration route is considered revolutionary for CNS medications delivery. The objective of the present study was to develop two types of nanocarriers, poly (lactic-co-glycolic acid) nanoparticles (PLGA NPs) and solid lipid nanoparticles (SLNs), for the IN delivery of MEL adapting the Quality by Design approach (QbD). Turning then to further enhance the optimized nanoformulation behavior by chitosan-coating. SLNs showed higher encapsulation efficacy (EE) and drug loading (DL) than PLGA NPs 87.26% (EE) and 2.67% (DL); 72.23% (EE) and 2.55% (DL), respectively. MEL encapsulated into the nanoformulations improved in vitro release, mucoadhesion, and permeation behavior compared to the native drug with greater superiority of chitosan-coated SLNs (C-SLNs). In vitro-in vivo correlation (IVIVC) results estimated a significant in vivo brain distribution of the nanoformulations compared to native MEL with estimated greater potential in the C-SLNs. Hence, MEL encapsulation into C-SLNs towards IN route can be promising in enhancing its brain bioavailability.

Drug Delivery (Nano)Platforms for Oral and Dental Applications: Tissue Regeneration, Infection Control, and Cancer Management

The oral cavity and oropharynx are complex environments that are susceptible to physical, chemical, and microbiological insults. They are also common sites for pathological and cancerous changes. The effectiveness of conventional locally-administered medications against diseases affecting these oral milieus may be compromised by constant salivary flow. For systemically-administered medications, drug resistance and adverse side-effects are issues that need to be resolved. New strategies for drug delivery have been investigated over the last decade to overcome these obstacles. Synthesis of nanoparticle-containing agents that promote healing represents a quantum leap in ensuring safe, efficient drug delivery to the affected tissues. Micro/nanoencapsulants with unique structures and properties function as more favorable drug-release platforms than conventional treatment approaches. The present review provides an overview of newly-developed nanocarriers and discusses their potential applications and limitations in various fields of dentistry and oral medicine.

New perspectives on the topical management of recurrent candidiasis

Candidiasis is a common opportunistic infection caused by fungi of the Candida genus that affects mainly mucocutaneous tissues (e.g., vaginal, oral, and mammary). This condition has been known for a long time; thus, innumerous topical and systemic treatments are already available on the market worldwide. Yet, recurrent superficial candidiasis (RSC) is an expected outcome, still lacking effective and convenient treatments. Although several individual conditions may contribute to disease recurrence, biofilms' presence seems to be the main etiological factor contributing to antifungal resistance. More than proposing novel antifungal agents, current research seems to be focusing on improving the pharmaceutical technology aspects of formulations to address such a challenge. These include extending and improving intimate contact of drug delivery systems with the mucocutaneous tissues, increasing drug loading dose, and enhancing topical drug permeation. This review discusses the current understanding of the RSC and the use of pharmaceutical technology tools in obtaining better results. Even though several drawbacks of conventional formulations have been circumvented with the help of nano- or microencapsulation techniques and with the use of mucoadhesive formulation excipients, many challenges remain. In particular, the need to mask the unpalatable taste of formulations for the treatment of oral candidiasis, and the necessity of formulations with a "dryer" sensorial feeling and improved performances in providing higher bioavailability for the treatment of mammary and vaginal candidiasis.

Development and machine-learning optimization of mucoadhesive nanostructured lipid carriers loaded with fluconazole for treatment of oral candidiasis

The aim of this work was to prepare and optimize mucoadhesive nanostructured lipid carrier (NLC) impregnated with fluconazole for better management of oral candidiasis. The NLCs were fabricated using an emulsification/sonication technique. The nanoparticles consisted of stearic acid, oleic acid, Pluronic F127, and lecithin. Box-Behnken design, artificial neural networking, and variable weight desirability were employed to optimize the joint effect of drug concentration in the drug/lipid mixture, solid lipid concentration in the solid/liquid lipid mixture, and surfactant concentration in the total mixture on size and entrapment. The optimized NLCs were coated with chitosan. The nanoparticles were characterized by surface charge, spectroscopic, thermal, morphological, mucoadhesion, release, histopathological, and antifungal properties. The nanoparticles are characterized by a particle size of 335 ± 13.5 nm, entrapment efficiency of 73.1 ± 4.9%, sustained release, minor histopathological effects on rabbit oral mucosa, and higher fungal inhibition efficiency for an extended period of time compared with fluconazole solution. Coating the nanoparticles with chitosan increased its adhesion to rabbit oral buccal mucosa and improved its anti-candidiasis activity. It is concluded that mucoadhesive lipid-based nanoparticles amplify the effect of fluconazole on Candida albicans in vitro. This finding warrants pre-clinical and clinical studies in oral candidiasis disease models to corroborate in vitro findings.

[Nanomaterials in the modern dentistry (review)]

Was to study the promising areas for using nanotechnologies in dentistry, existing methods of diagnostics, treatment and prevention of the dental diseases based on the properties of nanoparticles, to review the scientific literature devoted to this problem. In this literature review we use 86 sources: 1 Russian and 85 foreign articles. Analyzed articles were published within the last 5 years. The literature review summarizes and presents up-to-date methods of diagnosing, treating, and preventing dental disease that use nanotechnologies. Development and implementation of nanotechnological treatment are a promising direction for modern dentistry.

Oral Gel Loaded by Fluconazole‒Sesame Oil Nanotransfersomes: Development, Optimization, and Assessment of Antifungal Activity

Candidiasis is one of the frequently encountered opportunistic infections in the oral cavity and can be found in acute and chronic presentations. The study aimed to develop fluconazole-loaded sesame oil containing nanotransfersomes (FS-NTF) by the thin-layer evaporation technique to improve the local treatment of oral candidiasis. Optimization of the formulation was performed using the Box‒Behnken statistical design to determine the variable parameters that influence the vesicle size, entrapment efficiency, zone of inhibition, and ulcer index. Finally, the formulated FS-NTF was embedded within the hyaluronic acid‒based hydrogel (HA-FS-NTF). The rheological behavior of the optimized HA-FS-NTF was assessed and the thixotropic behavior with the pseudoplastic flow was recorded; this is desirable for an oral application. An in vitro release study revealed the rapid release of fluconazole from the HA-FS-NTF. This was significantly higher when compared with the fluconazole suspension and hyaluronic acid hydrogel containing fluconazole. Correspondingly, the ex vivo permeation was also found to be higher in HA-FS-NTF in sheep buccal mucosa (400 μg/cm2) when compared with the fluconazole suspension (122 μg/cm2) and hyaluronic acid hydrogel (294 μg/cm2). The optimized formulation had an inhibition zone of 14.33 ± 0.76 mm and enhanced antifungal efficacy for the ulcer index (0.67 ± 0.29) in immunocompromised animals with Candida infection; these findings were superior to those of other tested formulations. Hence, it can be summarized that fluconazole can effectively be delivered for the treatment of oral candidiasis when it is entrapped in a nanotransfersome carrier and embedded into cross-linked hyaluronic acid hydrogel.

Formulation and Evaluation of Novel Hybridized Nanovesicles for Enhancing Buccal Delivery of Ciclopirox Olamine

Ciclopirox olamine (CPO) is a topical wide-spectrum antimycotic agent that possesses antifungal, antibacterial and anti-inflammatory activities. Loading CPO into a hybridized vesicular system is expected to enhance its buccal permeation and hence, therapeutic activity, whereas the frequent administration and side effects are reduced. Vesicular systems with high penetration ability were prepared based on cholesterol, Lipoid S45 or Phospholipon 90H, with span 60 while incorporating a penetration enhancer (Labrafac or labrasol) followed by full assessment of their size, entrapment efficiency, and drug release profiles. The optimum formulation, composed of Lipoid S45 and Labrafac, possessed the smallest vesicle size (346.1 nm), highest entrapment efficiency (94.4%), and sustained CPO release pattern, and was characterized for its morphology and thermal properties. This powerful mixture of the penetration enhancers (Lipoid S45 and Labrafac) in the designed hybridized vesicles was thoroughly investigated for their characteristics after being incorporated in bioadhesive gel. Moreover, enhanced antifungal activity was demonstrated either upon testing the designed formulation on agar plates or in vivo upon treating infected rabbits with the proposed formulation. Results suggest that the presented bioadhesive gel incorporating the CPO-loaded vesicles can be a promising delivery system that can offer a prolonged localized antifungal treatment with enhanced therapeutic effect.

Terpinen-4-ol and nystatin co-loaded precursor of liquid crystalline system for topical treatment of oral candidiasis

This study was performed to develop a liquid crystalline system (LCS) incorporated with terpinen-4-ol and nystatin to evaluate its antifungal, antibiofilm, and synergistic/modulatory activity against Candida albicans. The LCS was composed of a dispersion containing 40% propoxylated and ethoxylated cetyl alcohol, 40% oleic acid, and 0.5% chitosan dispersion. According to analysis by polarized light microscopy, rheology, and mucoadhesion studies, the incorporation of 100% artificial saliva increased the pseudoplasticity, consistency index, viscosity, and mucoadhesion of the formulation. The minimum inhibitory concentration, minimum fungicidal concentration, and rate of biofilm development were used to evaluate antifungal activity; the LCS containing terpinen-4-ol and nystatin effectively inhibited C. albicans growth at a lower concentration, displaying a synergistic action. Therefore, LCS incorporated with terpinen-4-ol and nystatin is a promising alternative for preventing and treating infections and shows potential for the development of therapeutic strategies against candidiasis.

Emerging Applications of Drug Delivery Systems in Oral Infectious Diseases Prevention and Treatment

The oral cavity is a unique complex ecosystem colonized with huge numbers of microorganism species. Oral cavities are closely associated with oral health and sequentially with systemic health. Many factors might cause the shift of composition of oral microbiota, thus leading to the dysbiosis of oral micro-environment and oral infectious diseases. Local therapies and dental hygiene procedures are the main kinds of treatment. Currently, oral drug delivery systems (DDS) have drawn great attention, and are considered as important adjuvant therapy for oral infectious diseases. DDS are devices that could transport and release the therapeutic drugs or bioactive agents to a certain site and a certain rate in vivo. They could significantly increase the therapeutic effect and reduce the side effect compared with traditional medicine. In the review, emerging recent applications of DDS in the treatment for oral infectious diseases have been summarized, including dental caries, periodontitis, peri-implantitis and oral candidiasis. Furthermore, oral stimuli-responsive DDS, also known as "smart" DDS, have been reported recently, which could react to oral environment and provide more accurate drug delivery or release. In this article, oral smart DDS have also been reviewed. The limits have been discussed, and the research potential demonstrates good prospects.

Transmucosal delivery of melatonin-encapsulated niosomes in a mucoadhesive gel

AIM

A transmucosal niosome gel was developed to improve the pharmacokinetics of exogenous melatonin.

MATERIALS & METHODS

The melatonin niosomes (MN) gel was characterized and melatonin levels were determined in healthy volunteers.

RESULTS

Micron-sized MN in a gel, mean ex vivo residence time of more than 3 h with maximum adhesiveness at 25 and 37°C showed similar in vitro release but different in vitro permeation to melatonin gel. Oral transmucosal MN gels, at 2.5, 5 and 10 mg, topically applied in 14 healthy volunteers in a randomized double-blinded crossover design with 7-day washout, gave dose-proportional pharmacokinetics, with improved absorption and prolonged systemic circulation.

CONCLUSION

The transmucosal MN gel provides a topical option for melatonin administration with substantial prolonged systemic delivery.

Application of Antimicrobial Nanoparticles in Dentistry

Oral cavity incessantly encounters a plethora of microorganisms. Plaque biofilm-a major cause of caries, periodontitis and other dental diseases-is a complex community of bacteria or fungi that causes infection by protecting pathogenic microorganisms from external drug agents and escaping the host defense mechanisms. Antimicrobial nanoparticles are promising because of several advantages such as ultra-small sizes, large surface-area-to-mass ratio and special physical and chemical properties. To better summarize explorations of antimicrobial nanoparticles and provide directions for future studies, we present the following critical review. The keywords "nanoparticle," "anti-infective or antibacterial or antimicrobial" and "dentistry" were retrieved from Pubmed, Scopus, Embase and Web of Science databases in the last five years. A total of 172 articles met the requirements were included and discussed in this review. The results show that superior antibacterial properties of nanoparticle biomaterials bring broad prospects in the oral field. This review presents the development, applications and underneath mechanisms of antibacterial nanoparticles in dentistry including restorative dentistry, endodontics, implantology, orthodontics, dental prostheses and periodontal field.

Synthesis, characterization and antifungal activity of a novel formulated nanocomposite containing Indolicidin and Graphene oxide against disseminated candidiasis

OBJECTIVE

Candidiasis is one of the most opportunistic fungal infections in immunocompromised patients. The emergence of multidrug-resistant Candida species necessitates the development of novel antifungal agents. Seeking to the discovery of natural antifungal agents, this study aimed to synthesize a novel formulated nanocomposite containing Indolicidin (IN), antimicrobial peptide, and Graphene oxide (GO), kind of nanomaterial, against Candida growth using in vitro and in vivo experiments for the first time.

METHODS

The formulated nanocomposite (GO-IN) synthetized and was characterized using scanning electron microscopy, X-ray power diffraction, and fourier transform infrared method analysis. The in vitro antifungal activity of fluconazole (FLU), GO, IN, and GO-IN was determined against Candida albicans (C. albicans) compared to control groups, cell cytotoxicity assay on human intestinal epithelial cells (IEP) and hemolytic activities were performed. Moreover, in vivo experiments of nanocomposite were assessed in BALB/c mice.

RESULTS

Our results showed that nanocomposite had the highest inhibitory effect against C. albicans (MIC 3.12μg/mL) compared with flu (MIC 4μg/mL), IN (MIC 12.5μg/mL), and GO (MIC 6.25μg/mL). Viability of human intestinal cell line at the MIC concentration (3.12μg/mL) of nanocomposite (GO-IN) was detected as 60% (P<0.05). The results of hemolytic activity showed that nanocomposite cause 2.73% of red blood cell membrane damage. For in vivo experiments, infected mice were successfully treated with GO-IN once a day within 7 days. GO-IN treated group eliminated the Candida infection in the spleen and liver of BALB/c mice (P=0.001) similar to fluconazole. There was no significant difference in histological manifestations between flu and GO-IN groups.

CONCLUSION

This study suggests that synergistic combination of GO and IN provide a new option, representing a potential therapeutic efficiency against disseminated candidiasis in an animal model as well as might be used as adjunct therapy in the management of candidiasis. However, further investigation is needed to evaluate the efficacy of the nanocomposite.

Mucoadhesive assessment of different antifungal nanoformulations

Oral candidiasis is an important opportunistic fungal infection and polyenes and azoles are still the most used antifungal agents. However, the oral absorption resulting from most available treatments is generally poor and, consequently, a very high frequency of administrations of antifungal agents is strongly required. Therefore, the major challenge is to improve the retention of the antifungal agents in buccal mucosa, and the encapsulation into mucoadhesive systems may be considered as a possible strategy to achieve this objective. Three types of mucoadhesive polymeric nanoparticles (polylactic acid (PLA), polylactic-co-glycolic acid (PLGA) and alginate) were prepared using nystatin as model drug. The drug-loaded nanoparticles were then included in toothpaste, oral gel and oral films, respectively. The results demonstrated that the loaded nanoparticles were successfully produced, presenting a mean size between 300-900 nm and with a negative surface charge. Also, the determination of the encapsulation efficiency of all nanoparticles showed values above 70%. In terms of the in vitro mucoadhesion, the best formulation was the oral film loaded with the PLGA nanoparticles followed by the oral gel with PLA nanoparticles and thirdly the toothpaste with alginate nanoparticles. This was confirmed in an in vitro rinsing model with mucus producing HT29-MTX cells, where the percentage of nystatin retained to the cells after 40 min of simulated saliva flow was between 10-27% when formulations were used and only 4% for free nystatin. Further studies will include in vivo testing using animal models.