Evaluation of antibacterial, angiogenic, and osteogenic activities of green synthesized gap-bridging copper-doped nanocomposite coatings

Bio-response of copper-magnesium co-substituted mesoporous bioactive glass for bone tissue regeneration

Mesoporous bioactive glass (MBG) is widely acknowledged in bone tissue engineering due to its mesoporous structure, large surface area, and bioactivity. Recent research indicates that introduction of metallic ions has beneficial impacts on bone metabolism and angiogenesis. Thus, the features of MBG can be modified by incorporating combinations of ions, such as magnesium (Mg) and copper (Cu), which can play a considerable role in bone formation, influencing angiogenesis, osteogenesis, as well as antibacterial properties. In this study, Mg and Cu were co-doped for the first time (in a ratio of 1 : 1) in 80SiO2-5P2O5-(15 - 2x)CaO-xMgO-xCuO glass composition with x = 0, 0.5, 1, and 2 mol%, synthesized using the sol-gel and evaporation-induced self-assembly method. X-ray diffraction analysis confirmed the amorphous nature of the powders, while inductively coupled plasma-optical emission spectrometry verified the existence of dopant ions in the respective amounts. The nitrogen sorption method indicated the formation of uniform cylindrical mesopores which are open at both ends and a high surface area of the powders. TEM images show fringes, indicating an ordered mesoporous structure in all MgCu co-doped systems. In vitro bioactivity was observed in all MBG powders, confirmed by the formation of an apatite phase when placed in simulated body fluid (SBF). Flake-like microstructure characteristics of HAp crystals found on the surface of MBG powders were visualized using FESEM. Cytotoxicity tests at lower concentrations (0.1 and 1 wt/vol%) of co-doped 2MC MBG (co-doping up to 2 mol%) showed cell proliferation and viability of osteoblast-like MG-63 cells and normal human dermal fibroblast (NHDF) cells similar to the basic glass 80S. Antibacterial study of MBG pellets showed an increment in the zone of inhibition with the sequential addition of doping ions. The turbidity measurement of bacterial cultures revealed that the optimal concentration for effectively inhibiting bacterial growth was 1 wt/vol% (i.e., 10 mg mL-1) concentration of MBG extracts. The result suggested that the incorporation of Mg and Cu ions in MBG in lower concentrations of up to 2 mol% can be useful in bone regeneration owing to bioactivity, cell proliferation, and antibacterial characteristics.

Advances in Research on Titanium and Titanium Alloys with Antibacterial Functionality for Medical Use—A Review

Materials based on titanium and its alloys are widely used in the medical and dental fields because of their excellent physical properties such as hardness, ductility and elastic modulus, etc. However, because commonly used titanium alloy internal plants do not have antibacterial properties, when these implants are implanted into the human body, there is a certain risk of infection. Such infections are extremely painful for the patient and problematic for the attending physician. In the past, infections of implants were usually treated with systemic antibiotics in combination with thorough debridement or implant replacement. However, these are passive treatments and typically cause huge physical and economic burdens on the patient. Therefore, attempts towards the development of implants with antibacterial functionality have been increasing, with the combination of titanium alloys with antibiotics, antibacterialmetals, and antibacterial peptides being the main research direction. Therefore, this paper will discuss the latest research progress in the preparation of titanium alloys with antibacterial strategies such as combining antibiotics or antimicrobial peptides, adding antimicrobial metals, and the antibacterial properties and biocompatibility of proposed systems are summarised and discussed herein. This review should serve as a reference for further research on antibacterial titanium alloy implants.

Investigation on Characterization of Novel Anti-bacterial Chitosan/Gelatin Composite Membranes Loaded with Quercetin via Electrophoretic Deposition

Peri-implantitis is characterized by inflammation resulting from bacterial infections in peri-implant connective tissue. The purpose of this study was to prepare and characterize chitosan/gelatin (CSG)-based membranes with antibacterial agents to functionalize the surface of titanium (Ti) implants. CSG membranes were prepared on Ti substrates via electrophoretic deposition (EPD). Quercetin, an active flavonoid responsible for fulfilling various plant functions, was introduced as an antibacterial agent to be loaded into the membrane during preparation. The fabrication of quercetin-loaded CSG membranes via EPD was also investigated. Fluorescent microscope, Attenuated Total Reflection Fourier transform infrared spectroscopy, and X-ray diffraction results verified the entrapment of quercetin. The membranes swelled by 150% of mass after rehydration. The antibacterial effects of quercetin on Gram-positive bacteria, such as Staphylococcus aureus and methicillin-resistant Staphylococcus aureus, were verified by spread-plate, scanning electron microscopy, and live/dead staining. Cytological experiments showed that the biocompatibility of rat bone marrow mesenchymal stromal cells was promoted by quercetin-loaded membranes, exclusively in the group with the highest content of quercetin. The quercetin-loaded groups also enhanced the antineoplastic activity of MG-63 cells. These results suggested that quercetin-loaded CSG membranes were successfully fabricated via EPD. Thus, biocompatible and antibacterial membranes could be a potential strategy to functionalize Ti implants.

Anti-Acid Biomimetic Dentine Remineralization Using Inorganic Silica Stabilized Nanoparticles Distributed Electronspun Nanofibrous Mats

Background

To manage the sharp pain of dentine hypersensitivity, various materials are utilized to conduct dentine remineralization. However, many prior materials are limited with their single function and complicated operations. In this study, silica and calcium (strontium) carbonates mineralized nano cellulose fibrous (Si/Ca(Sr)-NCF) mat with the ability to release acid resistant and biomimetic mineralizational silica/calcium (strontium) carbonate co-precipitation nanoparticles (Si/Ca(Sr) NPs) were fabricated. The dentine occluding effects, antibacterial activity and cytocompatibility of the Si/Ca(Sr)-NCF mats were evaluated.

Methods

The Si/Ca(Sr)-NCF mats were fabricated by dipping the electrospun nano cellulose fiber (NCF) into silica and calcium (strontium) carbonate liquid. Physicochemical characterizations and ion release were confirmed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), ion release assays and transmission electron microscopy (TEM). Sixty dentine discs were randomly divided into five groups: 1, blank NCF; 2, Si/Ca(Sr 0)-NCF; 3, Si/Ca(Sr 0.01)-NCF; 4, Si/Ca(Sr 0.05)-NCF; 5, Si/Ca(Sr 0.1)-NCF. Dentine discs were mineralized by the mats and observed with SEM immediately, after acid challenge and remineralized in artificial saliva. The releasing liquid was investigated by TEM and type I collagen model. Then, antibacterial property and cytocompatibility were evaluated.

Results

SEM and TEM results confirmed that the experiment mats continuously released amorphous Si/Ca(Sr) NPs and consequently realized anti-acid dentine biomimetic remineralization. Homogeneous surface coverage and collagen intrafibrillar mineralization in strontium adding groups illustrated the mineralization effect was not only by in site precipitation, but also collagen heterogeneous nucleation. Additionally, acceptable antibacterial and cytocompatibility properties were illustrated in low and middle Sr²⁺ containing mats.

Conclusion

In vitro studies on human dentine discs and type I collagen demonstrated that Si/Ca(Sr)–NCF system was a multifunction system inducing anti-acid, biomimetic, antibacterial and cytocompatible dentine remineralization. This multifunction mat would be a promising DH treatment candidate for complicated exposed dentine surfaces.

Fabrication and functionalization of biocompatible carboxymethyl chitosan/gelatin membranes via anodic electrophoretic deposition

A biocompatible CMC/G membrane for titanium substrates has been fabricated in an eco-friendly manner and could be a promising carrier for negatively charged agents.

Osteoblast Response to Copper-Doped Microporous Coatings on Titanium for Improved Bone Integration

Due to their excellent mechanical properties and good biocompatibility, titanium alloys have become a popular research topic in the field of medical metal implants. However, the surface of the titanium alloy does not exhibit biological activity, which may cause poor integration between the interface of the titanium implant and the interface of the bone tissue and subsequently may cause the implant to fall off. Therefore, surface biological inertness is one of the problems that titanium alloys must overcome to become an ideal orthopedic implant material. Surface modification can improve the biological properties of titanium, thereby enhancing its osseointegration effect. Copper is an essential trace element for the human body, can promote bone formation and plays an important role in maintaining the physiological structure and function of bone and bone growth and development. In this study, a microporous copper-titanium dioxide coating was prepared on the surface of titanium by microarc oxidation. Based on the evaluation of its surface characteristics, the adhesion, proliferation and differentiation of MC3T3-E1 cells were observed. A titanium rod was implanted into the rabbit femoral condyle, and the integration of the coating and bone tissue was evaluated. Our research results show that the microporous copper-titanium dioxide coating has a nearly three-dimensional porous structure, and copper is incorporated into the coating without changing the structure of the coating. In vitro experiments found that the coating can promote the adhesion, proliferation and differentiation of MC3T3-E1 cells. In vivo experiments further confirmed that the titanium copper-titanium dioxide microporous coating can promote the osseointegration of titanium implants. In conclusion, copper-titanium dioxide microporous coatings can be prepared by microarc oxidation, which can improve the biological activity and biocompatibility of titanium, promote new bone formation and demonstrate good osteoinductive properties. Therefore, the use of this coating in orthopedics has potential clinical application.

Properties improvement of titanium alloys scaffolds in bone tissue engineering: a literature review

Owing to their excellent biocompatibility and corrosion-resistant properties, titanium (Ti) (and its alloy) are essential artificial substitute biomaterials for orthopedics. However, flaws, such as weak osteogenic induction ability and higher Young's modulus, have been observed during clinical application. As a result, short- and long-term postoperative follow-up has found that several complications have occurred. For decades, scientists have exerted efforts to compensate for these deficiencies. Different modification methods have been investigated, including changing alloy contents, surface structure transformation, three-dimensional (3D) structure transformation, coating, and surface functionalization technologies. The cell-surface interaction effect and imitation of the natural 3D bone structure are the two main mechanisms of these improved methods. In recent years, significant progress has been made in materials science research methods, including thorough research of titanium alloys of different compositions, precise surface pattern control technology, controllable 3D structure construction technology, improvement of coating technologies, and novel concepts of surface functionalization. These improvements facilitate the possibility for further research in the field of bone tissue engineering. Although the underlying mechanism is still not fully understood, these studies still have some implications for clinical practice. Therefore, for the direction of further research, it is beneficial to summarize these studies according to the basal method used. This literature review aimed to classify these technologies, thereby providing beginners with a preliminary understanding of the field.

Cu-Co Co-Doped Microporous Coating on Titanium with Osteogenic and Antibacterial Properties

Titanium (Ti) and its alloys are widely used in bone surgery by virtue of their excellent mechanical properties and good biocompatibility; however, complications such as loosening and sinking have been reported post-implantation. Herein we deposited a copper-cobalt (Cu-Co) co-doped titanium dioxide (TUO) coating on the surface of Ti implants by microarc oxidation. The osteogenic and antimicrobial properties of the coating were evaluated by in vitro experiments, and we also assessed β-catenin expression levels on different sample surfaces. Our results revealed that the coating promoted the adhesion, proliferation, and differentiation of MG63 osteoblasts, and TUO coating promoted β-catenin expression; moreover, the proliferation of Staphylococcus aureus was inhibited. To summarize, we report that Cu-Co co-doping can enhance the osteogenic and antibacterial activities of orthopedic Ti implants, leading to potentially improved clinical performance.

Multifunctional natural polymer-based metallic implant surface modifications

High energy traumas could cause critical damage to bone, which will require permanent implants to recover while functionally integrating with the host bone. Critical sized bone defects necessitate the use of bioactive metallic implants. Because of bioinertness, various methods involving surface modifications such as surface treatments, the development of novel alloys, bioceramic/bioglass coatings, and biofunctional molecule grafting have been utilized to effectively integrate metallic implants with a living bone. However, the applications of these methods demonstrated a need for an interphase layer improving bone-making to overcome two major risk factors: aseptic loosening and peri-implantitis. To accomplish a biologically functional bridge with the host to prevent loosening, regenerative cues, osteoimmunomodulatory modifications, and electrochemically resistant layers against corrosion appeared as imperative reinforcements. In addition, interphases carrying antibacterial cargo were proven to be successful against peri-implantitis. In the literature, metallic implant coatings employing natural polymers as the main matrix were presented as bioactive interphases, enabling rapid, robust, and functional osseointegration with the host bone. However, a comprehensive review of natural polymer coatings, bridging and grafting on metallic implants, and their activities has not been reported. In this review, state-of-the-art studies on multifunctional natural polymer-based implant coatings effectively utilized as a bone tissue engineering (BTE) modality are depicted. Protein-based, polysaccharide-based coatings and their combinations to achieve better osseointegration via the formation of an extracellular matrix-like (ECM-like) interphase with gap filling and corrosion resistance abilities are discussed in detail. The hypotheses and results of these studies are examined and criticized, and the potential future prospects of multifunctional coatings are also proposed as final remarks.

Biological applications of copper-containing materials

Copper is an indispensable trace metal element in the human body, which is mainly absorbed in the stomach and small intestine and excreted into the bile. Copper is an important component and catalytic agent of many enzymes and proteins in the body, so it can influence human health through multiple mechanisms. Based on the biological functions and benefits of copper, an increasing number of researchers in the field of biomaterials have focused on developing novel copper-containing biomaterials, which exhibit unique properties in protecting the cardiovascular system, promoting bone fracture healing, and exerting antibacterial effects. Copper can also be used in promoting incisional wounds healing, killing cancer cells, Positron Emission Tomography (PET) imaging, radioimmunological tracing and radiotherapy of cancer. In the present review, the biological functions of copper in the human body are presented, along with an overview of recent progress in our understanding of the biological applications and development of copper-containing materials. Furthermore, this review also provides the prospective on the challenges of those novel biomaterials for future clinical applications.

Metallic Antibacterial Surface Treatments of Dental and Orthopedic Materials

The oral cavity harbors complex microbial communities, which leads to biomaterial-associated infections (BAI) during dental and orthopedic treatments. Conventional antibiotic treatments have met great challenges recently due to the increasing emergency of drug-resistant bacteria. To tackle this clinical issue, antibacterial surface treatments, containing surface modification and coatings, of dental and orthopedic materials have become an area of intensive interest now. Among various antibacterial agents used in surface treatments, metallic agents possess unique properties, mainly including broad-spectrum antibacterial properties, low potential to develop bacterial resistance, relative biocompatibility, and chemical stability. Therefore, this review mainly focuses on underlying antibacterial applications and the mechanisms of metallic agents in dentistry and orthopedics. An overview of the present review indicates that much work remains to be done to deepen the understanding of antibacterial mechanisms and potential side-effects of metallic agents.

Electrophoretic Deposition and Characterization of Functional Coatings Based on an Antibacterial Gallium (III)-Chitosan Complex

Despite their broad biomedical applications in orthopedics and dentistry, metallic implants are still associated with failures due to their lack of surface biofunctionality, leading to prosthesis-related microbial infections. In order to address this issue, the current study focuses on the fabrication and characterization of a novel type of antibacterial coating based on gallium (III)-chitosan (Ga (III)-CS) complex layers deposited on metallic substrates via electrophoretic deposition (EPD). Aiming for the production of homogeneous and monophasic coatings, a two step-procedure was applied: the first step involved the synthesis of the Ga (III)-CS complex, followed by EPD from suitable solutions in an acetic acid–aqueous solvent. The influence of Ga (III) concentration on the stability of the suspensions was evaluated in terms of zeta potential. Fourier transform infrared (FTIR) and energy dispersive X-ray (EDX) spectroscopic analyses indicated the chelation of CS with Ga (III) within the coatings, while scanning electron microscopy (SEM) confirmed that no additional metallic gallium deposited during EPD. Furthermore, the results demonstrated that the wettability, mechanical properties, swelling ability, and enzymatic degradation of the coatings were affected by the quantity of Ga (III) ions. Colony forming unit (CFU) tests showed a strong synergistic effect between CS and Ga (III) in inhibiting Escherichia coli strain growth compared to control CS samples. An in vitro study with MG-63 cells showed that Ga (III)-containing coatings were not toxic after 24 h of incubation.

Electrophoretic Deposition of Copper(II)-Chitosan Complexes for Antibacterial Coatings

Bacterial infection associated with medical implants is a major threat to healthcare. This work reports the fabrication of Copper(II)–Chitosan (Cu(II)–CS) complex coatings deposited by electrophoretic deposition (EPD) as potential antibacterial candidate to combat microorganisms to reduce implant related infections. The successful deposition of Cu(II)–CS complex coatings on stainless steel was confirmed by physicochemical characterizations. Morphological and elemental analyses by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) spectroscopy verified the uniform distribution of copper in the Chitosan (CS) matrix. Moreover, homogeneous coatings without precipitation of metallic copper were confirmed by X-ray diffraction (XRD) spectroscopy and SEM micrographs. Controlled swelling behavior depicted the chelation of copper with polysaccharide chains that is key to the stability of Cu(II)–CS coatings. All investigated systems exhibited stable degradation rate in phosphate buffered saline (PBS)–lysozyme solution within seven days of incubation. The coatings presented higher mechanical properties with the increase in Cu(II) concentration. The crack-free coatings showed mildly hydrophobic behavior. Antibacterial assays were performed using both Gram-positive and Gram-negative bacteria. Outstanding antibacterial properties of the coatings were confirmed. After 24 h of incubation, cell studies of coatings confirms that up to a certain threshold concentration of Cu(II) were not cytotoxic to human osteoblast-like cells. Overall, our results show that uniform and homogeneous Cu(II)–CS coatings with good antibacterial and enhanced mechanical stability could be successfully deposited by EPD. Such antibiotic-free antibacterial coatings are potential candidates for biomedical implants.

Multifunctional Copper-Containing Mesoporous Glass Nanoparticles as Antibacterial and Proangiogenic Agents for Chronic Wounds

The physiological wound healing process involves a cascade of events which could be affected by several factors resulting in chronic, non-healing wounds. The latter represent a great burden especially when bacterial biofilms are formed. The rise in antibiotic resistance amongst infectious microorganisms leads to the need of novel approaches to treat this clinical issue. In this context, the use of advanced biomaterials, which can enhance the physiological expression and secretion of the growth factors involved in the wound healing process, is gaining increasing attention as a robust and appealing alternative approach. Among them, mesoporous glasses are of particular interest due to their excellent textural properties and to the possibility of incorporating and releasing specific therapeutic species, such as metallic ions. One of the most attractive therapeutic ions is copper thanks to its proangiogenic and antibacterial effects. In this contribution, copper containing mesoporous glass nanoparticles were proposed as a multifunctional device to treat chronic wounds. The developed nanoparticles evidenced a very high specific surface area (740 m²/g), uniform pores of 4 nm and an almost total release of the therapeutic ion within 72 h of soaking. The produced nanoparticles were biocompatible and, when tested against Gram positive and Gram negative bacterial species, demonstrated antibacterial activity against both planktonic and biofilm bacteria in 2D cell monolayers, and in a 3D human model of infected skin. Their proangiogenic effect was tested with both the aortic ring and the chick chorioallantoic membrane assays and an increase in endothelial cell outgrowth at a concentration range between 30 and 300 ng/mL was shown. Overall, in this study biocompatible, multifunctional Cu-containing mesoporous glass nanoparticles were successfully produced and demonstrated to exert both antibacterial and proangiogenic effects.

Electrodeposition of Polysaccharide and Protein Hydrogels for Biomedical Applications

In the last few decades, polysaccharide and protein hydrogels have attracted significant attentions and been applied in various engineering fields. Polysaccharide and protein hydrogels with appealing physical and biological features have been produced to meet different biomedical applications for their excellent properties related to biodegradability, biocompatibility, nontoxicity, and stimuli responsiveness. Numerous methods, such as chemical crosslinking, photo crosslinking, graft polymerization, hydrophobic interaction, polyelectrolyte complexation and electrodeposition have been employed to prepare polysaccharide and protein hydrogels. Electrodeposition is a facile way to produce different polysaccharide and protein hydrogels with the advantages of temporal and spatial controllability. This paper reviews the recent progress in the electrodeposition of different polysaccharide and protein hydrogels. The strategies of pH induced assembly, Ca2+ crosslinking, metal ions induced assembly, oxidation induced assembly derived from electrochemical methods were discussed. Pure, binary blend and ternary blend polysaccharide and protein hydrogels with multiple functionalities prepared by electrodeposition were summarized. In addition, we have reviewed the applications of these hydrogels in drug delivery, tissue engineering and wound dressing.

Optical coherence tomography angiography for noninvasive evaluation of angiogenesis in a limb ischemia mouse model

We developed an optical coherence tomography angiography technique by improving the speckle contrast algorithm and the imaging process. This technique, which can achieve angiogenesis imaging in vivo without increasing trauma, was used to evaluate the microvasculature in limb ischemia mice. Sixteen left hindlimb ischemia mice were randomly allocated into CuSO₄ and saline groups. Within 7 days after treatment, limb ischemic damage, temperature and histological staining were assessed by traditional methods. In addition, angiogenesis was evaluated using an optical coherence tomography angiography system in vivo. All results were compared. After 7 days of treatment, both the ischemic tissue damage score and temperature ratio of the CuSO₄ group were significantly higher than those of the control group (all P < 0.05). The number of CD31-positive endothelial cells in the CuSO₄ group (0.1836 ± 0.0153) was significantly greater than that in the saline control group (0.0436 ± 0.0069) (P < 0.001). Optical coherence tomography angiography showed that the vessel area density of mice in the CuSO₄ group (0.2566 ± 0.0060) was significantly greater than that of mice in the control group (0.2079 ± 0.0202) (P = 0.027). Optical coherence tomography angiography represents a practical and effective method for observing angiogenesis in the mouse hindlimb in vivo without increasing trauma.

Antibacterial and osteogenic activity of a multifunctional microporous coating codoped with Mg, Cu and F on titanium

As preferred materials for bone tissue repair and replacement, titanium (Ti) and its alloys have been widely applied in clinical practice. However, since these materials are bioinert, synostosis cannot occur between these materials and natural bone. Therefore, modifying the surface of Ti with bioactive elements has been the subject of intense research. In the present study, a magnesium-copper-fluorine (Mg-Cu-F) codoped titanium dioxide microporous coating (MCFMT) was prepared on the surface of Ti by micro-arc oxidation (MAO). The coating had a micro/nanoporous structure and was uniformly doped with Mg, Cu and F. In vitro, the MCFMT could promote the adhesion, proliferation, differentiation, mineralization and apoptosis of MC3T3-E1 osteoblasts. In addition, MCFMT could inhibit the growth of Staphylococcus, providing a good antibacterial effect. Further studies showed that MCFMT promoted MAPK expression and might promote osteogenesis through ERK1/2 signaling. Therefore, establishing an MCFMT coating on the Ti surface is a feasible and effective way to improve the biological activity of Ti. This study provides a new concept and method for improving the biological activity of Ti and thus has important theoretical significance and potential applications.

Surface treatment strategies to combat implant-related infection from the beginning

Orthopaedic implants are recognised as important therapeutic devices in the successful clinical management of a wide range of orthopaedic conditions. However, implant-related infections remain a challenging and not uncommon issue in patients with implanted instrumentation or medical devices. Bacterial adhesion and formation of biofilm on the surface of the implant represent important processes towards progression of infection. Given the intimate association between infection and the implant surface, adequate treatment of the implant surface may help mitigate the risk of infection. This review summarises the current surface treatment technologies and their role in prevention of implant-related infection from the beginning.

Translational potential of this article

Despite great technological advancements, the prevalence of implant-related infections remains high. Four main challenges can be identified. (i) Insufficient mechanical stability can cause detachment of the implant surface coating, altering the antimicrobial ability of functionalized surfaces. (ii) Regarding drug-loaded coatings, a stable drug release profile is of vital importance for achieving effective bactericidal effect locally; however, burst release of the loaded antibacterial agents remains common. (iii) Although many coatings and modified surfaces provide superior antibacterial action, such functionalisation of surfaces sometimes has a detrimental effect on tissue biocompatibility, impairing the integration of the implants into the surrounding tissue. (iv) Biofilm eradication at the implant surface remains particularly challenging. This review summarised the recent progress made to address the aforementioned problems. By providing a perspective on state-of-the-art surface treatment strategies for medical implants, we hope to support the timely adoption of modern materials and techniques into clinical practice.

Electrophoretic deposition of dexamethasone-loaded gelatin nanospheres/chitosan coating and its dual function in anti-inflammation and osteogenesis

Surface modification of metallic implants with bioactive and biodegradable coatings could be a promising approach for bone regeneration. The objective of this study was to prepare chitosan/gelatin nanospheres (GNs) composite coating for the delivery of dexamethasone (DEX). GNs with narrow size distribution and negative surface charge were firstly prepared by a two-step desolvation method. Homogeneous and stable gelatin nanospheres/chitosan (GNs/CTS) composite coatings were formed by electrophoretic deposition (EPD). Drug loading, encapsulation efficiency and in vitro release of DEX were estimated using high performance liquid chromatography (HPLC). The anti-inflammatory effect of DEX-loaded coatings on macrophage RAW 264.7 cells was assessed by the secretion of tumour necrosis factor (TNF) and inducible nitric oxide synthase (iNOS). Osteogenic differentiation of MC3T3-E1 osteoblasts on DEX-loaded coatings was investigated by osteogenic gene expression and mineralization. The DEX in GNs/CTS composite coating showed a two-stage release pattern could not only suppress inflammation during the burst release period, but also promote osteogenic differentiation in the sustained release period. This study might offer a feasible method for modifying the surface of metallic implants in bone regeneration.