Local Cellular Responses to Metallic and Ceramic Nanoparticles from Orthopedic Joint Arthroplasty Implants

Kaempferol attenuates wear particle-induced inflammatory osteolysis via JNK and p38-MAPK signaling pathways

ETHNOPHARMACOLOGICAL RELEVANCE

Wear particle-induced inflammatory osteoclast activation is a master contributor to periprosthetic osteolysis, which can cause pathological bone loss and destruction. Hence, inhibiting inflammation and osteoclastogenesis is an important strategy for preventing wear particle-induced osteolysis. To date, there are no FDA-approved non-surgical pharmacotherapies for arresting periprosthetic osteolysis. Kaempferol (KAE), a natural flavonol abundant in many traditional Chinese herbal medicines, has been shown to have protective effects against inflammatory bone diseases such as rheumatoid arthritis, but no previous study has evaluated the effects of KAE on wear particle-induced osteolysis.

AIM OF THE STUDY

The study aimed to investigate the effects of KAE on wear particle-induced inflammatory osteolysis and osteoclast activation, and further explore the underlying mechanisms.

MATERIALS AND METHODS

TiAl6V4 metal particles (TiPs) were retrieved from the prosthesis of patients who underwent revision hip arthroplasty due to aseptic loosening. A mouse calvarial osteolysis model was used to investigate the effects of KAE on wear particle-induced inflammatory osteolysis in vivo. Primary bone marrow-derived macrophages (BMMs) were used to explore the effects of KAE on osteoclast differentiation and bone-resorbing activity as well as the underlying mechanisms in vitro.

RESULTS

In the present study, we found that KAE alleviated wear particle-induced inflammatory bone loss in vivo and inhibited osteoclast differentiation and function in vitro. Furthermore, we revealed that KAE exerted anti-osteoclastogenic effects by downregulating JNK and p38-MAPK signaling as well as the downstream NFATc1 expression.

CONCLUSIONS

KAE is an alternative therapeutic agent for preventing and treating periprosthetic osteolysis and aseptic loosening.

The gut microbiome meets nanomaterials: exposure and interplay with graphene nanoparticles

Graphene-based nanoparticles are widely applied in many technology and science sectors, raising concerns about potential health risks. Emerging evidence suggests that graphene-based nanomaterials may interact with microorganisms, both pathogens and commensal bacteria, that dwell in the gut. This review aims to demonstrate the current state of knowledge on the interplay between graphene nanomaterials and the gut microbiome. In this study, we briefly overview nanomaterials, their usage and the characteristics of graphene-based nanoparticles. We present and discuss experimental data from in vitro studies, screening tests on small animals and rodent experiments related to exposure and the effects of graphene nanoparticles on gut microbiota. With this in mind, we highlight the reported crosstalk between graphene nanostructures, the gut microbial community and the host immune system in order to shed light on the perspective to bear on the biological interactions. The studies show that graphene-based material exposure is dosage and time-dependent, and different derivatives present various effects on host bacteria cells. Moreover, the route of graphene exposure might influence a shift in the gut microbiota composition, including the alteration of functions and diversity and abundance of specific phyla or genera. However, the mechanism of graphene-based nanomaterials' influence on gut microbiota is poorly understood. Accordingly, this review emphasises the importance of studies needed to establish the most desirable synthesis methods, types of derivatives, properties, and safety aspects mainly related to the routes of exposure and dosages of graphene-based nanomaterials.

Nano wear particles and the periprosthetic microenvironment in aseptic loosening induced osteolysis following joint arthroplasty

Joint arthroplasty is an option for end-stage septic arthritis due to joint infection after effective control of infection. However, complications such as osteolysis and aseptic loosening can arise afterwards due to wear and tear caused by high joint activity after surgery, necessitating joint revision. Some studies on tissue pathology after prosthesis implantation have identified various cell populations involved in the process. However, these studies have often overlooked the complexity of the altered periprosthetic microenvironment, especially the role of nano wear particles in the etiology of osteolysis and aseptic loosening. To address this gap, we propose the concept of the "prosthetic microenvironment". In this perspective, we first summarize the histological changes in the periprosthetic tissue from prosthetic implantation to aseptic loosening, then analyze the cellular components in the periprosthetic microenvironment post prosthetic implantation. We further elucidate the interactions among cells within periprosthetic tissues, and display the impact of wear particles on the disturbed periprosthetic microenvironments. Moreover, we explore the origins of disease states arising from imbalances in the homeostasis of the periprosthetic microenvironment. The aim of this review is to summarize the role of relevant factors in the microenvironment of the periprosthetic tissues, in an attempt to contribute to the development of innovative treatments to manage this common complication of joint replacement surgery.

Ceramic Wear Particles: Can They Be Retrieved In Vivo and Duplicated In Vitro?

BACKGROUND

Little is known about retrieved zirconia platelet toughened alumina (ZPTA) wear particles from ceramic-on-ceramic (COC) total hip arthroplasty. Our objectives were to evaluate clinically retrieved wear particles from explanted periprosthetic hip tissues and to analyze the characteristics of in vitro-generated ZPTA wear particles.

METHODS

Periprosthetic tissue and explants were received for 3 patients who underwent a total hip replacement of ZPTA COC head and liner. Wear particles were isolated and characterized via scanning electron microscopy and energy dispersive spectroscopy. The ZPTA and control (highly cross-linked polyethylene and cobalt chromium alloy) were then generated in vitro using a hip simulator and pin-on-disc testing, respectively. Particles were assessed in accordance with American Society for Testing and Materials F1877.

RESULTS

Minimal ceramic particles were identified in the retrieved tissue, consistent with the retrieved components demonstrating minimal abrasive wear with material transfer. Average particle diameter from in vitro studies was 292 nm for ZPTA, 190 nm for highly cross-linked polyethylene, and 201 nm for cobalt chromium alloy.

CONCLUSION

The minimal number of in vivo ZPTA wear particles observed is consistent with the successful tribological history of COC total hip arthroplasties. Due to the relatively few ceramic particles located in the retrieved tissue, in part due to implantation times of 3 to 6 years, a statistical comparison was unable to be made between the in vivo particles and the in vitro-generated ZPTA particles. However, the study provided further insight into the size and morphological characteristics of ZPTA particles generated from clinically relevant in vitro test setups.

Fretting corrosion behavior of Ti6Al4V alloy against zirconia-toughened alumina ceramic in simulated body fluid

The fretting corrosion at the head-neck interface of artificial hip joints is an important reason for the failure of prostheses. The Ti6Al4V alloy-zirconia-toughened alumina (ZTA) ceramic combination has been widely used to make the head and neck of artificial hip joints. In this study, its fretting corrosion behavior in simulated body fluid was studied by electrochemical monitoring, surface morphology characterization, and chemical composition analysis. A running condition fretting map (RCFM) of load and displacement was established, including three regimes, namely partial slip regime (PSR), mixed fretting regime (MFR), and gross slip regime (GSR). The friction dissipation energy increased gradually from the PSR to MFR and GSR. In the PSR, the damage mechanisms were slight abrasive wear and tribocorrosion at the edge of contact area, as well as extremely slight adhesive wear at the center. In the MFR, the damage mechanisms were mainly adhesive wear, abrasive wear, and corrosive wear. In the GSR, the damage mechanism was serious abrasive wear, fatigue wear, and corrosive wear combined with slight adhesive wear. Finally, an ion-concentration map was created, displaying the material-loss transition of different displacements and loads. The material loss increased with the increased displacement, and increased first and then decreased with the increased load.

Inhibitory effects of Formononetin on CoCrMo particle-induced osteoclast activation and bone loss through downregulating NF-κB and MAPK signaling

Wear particle-induced osteoclast over-activation is a major contributor to periprosthetic osteolysis and aseptic loosening, which can cause pathological bone loss and destruction. Hence, inhibiting excessive osteoclast-resorbing activity is an important strategy for preventing periprosthetic osteolysis. Formononetin (FMN) has been shown to have protective effects against osteoporosis, but no previous study has evaluated the effects of FMN on wear particle-induced osteolysis. In this study, we found that FMN alleviated CoCrMo alloy particles (CoPs)-induced bone loss in vivo and inhibited the formation and bone-resorptive function of osteoclasts in vitro. Moreover, we revealed that FMN exerted inhibitory effects on the expression of osteoclast-specific genes via the classical NF-κB and MAPK signaling pathways in vitro. Collectively, FMN is a potential therapeutic agent for the prevention and treatment of periprosthetic osteolysis and other osteolytic bone diseases.

The role of mitochondria in the peri-implant microenvironment

NEW FINDINGS

What is the topic of this review? In this review, we consider the key role of mitochondria in the peri-implant milieu, including the regulation of mitochondrial reactive oxygen species and mitochondrial metabolism in angiogenesis, the polarization of macrophage immune responses, and bone formation and bone resorption during osseointegration. What advances does it highlight? Mitochondria contribute to the behaviours of peri-implant cell lines based on metabolic and reactive oxygen species signalling modulations, which will contribute to the research field and the development of new treatment strategies for improving implant success.

ABSTRACT

Osseointegration is a dynamic biological process in the local microenvironment adjacent to a bone implant, which is crucial for implant performance and success of the implant surgery. Recently, the role of mitochondria in the peri-implant microenvironment during osseointegration has gained much attention. Mitochondrial regulation has been verified to be essential for cellular events in osseointegration and as a therapeutic target for peri-implant diseases in the peri-implant microenvironment. In this review, we summarize our current knowledge of the key role of mitochondria in the peri-implant milieu, including the regulation of mitochondrial reactive oxygen species and mitochondrial metabolism in angiogenesis, the polarization of macrophage immune responses, and bone formation and resorption during osseointegration, which will contribute to the research field and the development of new treatment strategies to improve implant success. In addition, we indicate limitations in our current understanding of the regulation of mitochondria in osseointegration and suggest topics for further study.

Clearance of senescent cells by navitoclax (ABT263) rejuvenates UHMWPE-induced osteolysis

Periprosthetic osteolysis is the leading cause of prosthesis failure and subsequent total joint revision. Wear particles produced by prosthetic materials are the main biological factors that cause periprosthetic osteolysis. Reducing the inflammatory response induced by the phagocytosis of wear particles by macrophages, blocking the activation of osteoclastogenesis, and promoting bone regeneration are essential for preventing the aseptic loosening of prostheses. In this study, we demonstrated that cellular senescence played a vital role during the process of ultra-high molecular weight polyethylene (UHMWPE) particle-induced osteolysis. Administration of the senolytic drug navitoclax (ABT263) could eliminate senescent cells and inhibit the secretion and inflammatory state of the senescence-associated secretory phenotype (SASP). We also discovered that ABT263 inhibited the formation of osteoclasts and had a significant therapeutic effect on UHMWPE particle-induced osteolysis based on the results of UHMWPE-induced mouse cranial osteolysis. Therefore, our research provided innovative strategies and ideas for the prevention and treatment of periprosthetic osteolysis.

Silica coated high performance oxide ceramics promote greater ossification than titanium implants: an in vivo study

BACKGROUND

This in vitro study investigated the osseointegration and implant integration of high performance oxide ceramics (HPOC) compared to titanium implants in rabbits.

METHODS

Histomorphometry was conducted around the distal, proximal, medial, and lateral aspects of the HPOC to quantify the amount of mature and immature ossification within the bone interface. Histomorphometry was conducted by a trained musculoskeletal pathologist. The region of interest (ROI) represented the percentage of surrounding area of the implant. The percentage of ROI covered by osteoid implant contact (OIC) and mature bone implant contact (BIC) were assessed. The surrounding presence of bone resorption, necrosis, and/or inflammation were quantitatively investigated.

RESULTS

All 34 rabbits survived the 6- and 12-week experimental period. All HPOC implants remained in situ. The mean weight difference from baseline was + 647.7 mg (P < 0.0001). The overall OIC of the ceramic group was greater at 6 weeks compared to the titanium implants (P = 0.003). The other endpoints of interest were similar between the two implants at all follow-up points. No difference was found in BIC at 6- and 12-weeks follow-up. No bone necrosis, resorption, or inflammation were observed.

CONCLUSION

HPOC implants demonstrated a greater osteoid implant contact at 6 weeks compared to the titanium implants, with no difference found at 12 weeks. The percentage of bone implant contact of HPOC implants was similar to that promoted by titanium implants.

Regulatory assessment of nano-enabled health products in public health interest. Position of the scientific advisory board of the French National Agency for the Safety of Medicines and Health Products

Nanomaterials are present in a wide variety of health products, drugs and medical devices and their use is constantly increasing, varying in terms of diversity and quantity. The topic is vast because it covers nanodrugs, but also excipients (that includes varying proportions of NMs) and medical devices (with intended or not-intended (by-products of wear) nanoparticles). Although researchers in the field of nanomedicines in clinical research and industry push for clearer definitions and relevant regulations, the endeavor is challenging due to the enormous diversity of NMs in use and their specific properties. In addition, regulatory hurdles and discrepancies are often cited as obstacles to the clinical development of these innovative products. The scientific council of the Agence Nationale de Sécurité du Médicament et des produits de santé (ANSM) undertook a multidisciplinary analysis encompassing fundamental, environmental and societal dimensions with the aim of identifying topics of interest for regulatory assessment and surveillance. This analysis allowed for proposing some recommendations for approximation and harmonization of international regulatory practices for the assessment of the risk/benefit balance of these products, considering as well the public expectations as regards efficacy and safety of nanomaterials used in Health products, in terms of human and environmental health.

Failure Analysis of Ultra-High Molecular Weight Polyethylene Tibial Insert in Total Knee Arthroplasty

Knee osteoarthritis is treated based on total knee arthroplasty (TKA) interventions. The most frequent failure cause identified in surgical practice is due to wear and oxidation processes of the prothesis' tibial insert. This component is usually manufactured from ultra-high molecular weight polyethylene (UHMWPE). To estimate the clinical complications related to a specific prosthesis design, we investigated four UHMWPE tibial inserts retrieved from patients from Clinical Hospital Colentina, Bucharest, Romania. For the initial analysis of the polyethylene degradation modes, macrophotography was chosen. A light stereomicroscope was used to estimate the structural performance and the implant surface degradation. Scanning electron microscopy confirmed the optical results and fulfilled the computation of the Hood index. The oxidation process in UHMWPE was analyzed based on Fourier-transform infrared spectroscopy (FTIR). The crystallinity degree and the oxidation index were computed in good agreement with the existing standards. Mechanical characterization was conducted based on the small punch test. The elastic modulus, initial peak load, ultimate load, and ultimate displacement were estimated. Based on the aforementioned experimental tests, a variation between 9 and 32 was found in the case of the Hood score. The oxidation index has a value of 1.33 for the reference sample and a maximum of 9.78 for a retrieved sample.

Functionalised High-Performance Oxide Ceramics with Bone Morphogenic Protein 2 (BMP-2) Induced Ossification: An In Vivo Study

This study investigated the in vivo osseointegration potential of high-performance oxide ceramics (HPOCs) with peptide bone morphogenic protein 2 (BMP-2), comparing them with titanium implants. Histomorphometry was conducted around the distal, proximal, medial, and lateral sides of the implants to quantify the amount of mature and immature ossification within the bone interface. We hypothesised that HPOCs functionalised with BMP-2 promote ossification. HPOCs functionalised with BMP-2 were manufactured at the Department of Dental Materials Science and Biomaterial Research of the RWTH University Aachen, Germany. Histomorphometry was conducted by a professional pathologist in all samples. The region of interest (ROI) represented the percentage of the surrounding area of the implant. The percentages of ROI covered by osteoid implant contact (OIC) and mature bone−implant contact (BIC) were assessed. The surrounding presence of bone resorption, necrosis, and/or inflammation was quantitatively investigated. A total of 36 rabbits were used for the experiments. No bone resorption, necrosis, or inflammation was found in any sample. At the 12-week follow-up, the overall BIC was significantly increased (p < 0.0001). No improvement was evidenced in OIC (p = 0.6). At the 6-week follow-up, the overall OIC was greater in the BMP-2 compared to the titanium group (p = 0.002). The other endpoints of interest evidenced similarity between the two implants at various follow-up time points (p > 0.05). In conclusion, alumina HPOCs functionalised with peptide BMP-2 promote in vivo ossification in a similar fashion to titanium implants.

Histomorphometry of Ossification in Functionalised Ceramics with Tripeptide Arg-Gly-Asp (RGD): An In Vivo Study

The present study investigated the osseointegration promoted by functionalised ceramics with peptide Arg-Gly-Asp (RGD) in a rabbit model in vivo. Histomorphometry of the RGD functionalised ceramic implants was conducted by a trained pathologist to quantify the amount of mature and immature ossification at the bone interface, and then compared to titanium alloy implants. The region of interest was the area surrounding the implant. The percentage of ROI covered by osteoid implant contact and mature bone implant contact were assessed. The presence of bone resorption, necrosis, and/or inflammation in the areas around the implant were quantitatively investigated. All 36 rabbits survived the experimental period of 6 and 12 weeks. All implants remained in situ. No necrosis, bone resorption, or inflammation were identified. At 12 weeks follow-up, the overall mean bone implant contact (p = 0.003) and immature osteoid contact (p = 0.03) were improved compared to the mean values evidenced at 6 weeks. At 6 weeks follow-up, the overall osteoid implant contact was greater in the RGD enhanced group compared to the titanium implant (p = 0.01). The other endpoints of interest were similar between the two implants at all follow-up points (p ≥ 0.05). Functionalised ceramics with peptide RGD promoted ossification in vivo. The overall osteoid and bone implant contact improved significantly from 6 to 12 weeks. Finally, RGD enhanced ceramic promoted faster osteoid implant contact in vivo than titanium implants. Overall, the amount of ossification at 12 weeks is comparable with the titanium implants. No necrosis, bone resorption, or inflammation were observed in any sample.

Cimifugin Suppresses NF-κB Signaling to Prevent Osteoclastogenesis and Periprosthetic Osteolysis

Background: Aseptic loosening of prosthesis (ALP) is one of the most common long-term complications of knee and hip arthroplasty. Wear particle-induced osteoclastogenesis and subsequent periprosthetic osteolysis account for the morbidity of ALP. Here, we investigate the potential of cimifugin (CIM), a natural extract from Cimicifuga racemosa and Saposhnikovia divaricata, as a bone-protective drug in the treatment of ALP.

Method: First, we performed cell viability and osteoclast formation assays to assess the effect of noncytotoxic CIM on osteoclast differentiation in vitro. Bone slice resorption and F-actin ring immunofluorescence assays were adopted to assess the effects of CIM on bone-resorption function. Then, quantitative real-time polymerase chain reaction (qRT–PCR) analysis was performed to further assess the repressive effects of CIM on osteoclastogenesis at the gene expression level. To elucidate the mechanisms underlying the above findings, Western blot and luciferase reporter gene assays were used to assess the regulatory effects of CIM on the NF-κB and MAPK signaling pathways. Moreover, a Ti particle-induced murine calvarial osteolysis model and subsequent histomorphometric analysis via micro-CT and immunohistochemical staining were used to elucidate the effect of CIM on periprosthetic osteolysis in vivo.

Result: CIM dose-dependently inhibited both bone marrow-derived macrophage (BMM)- and RAW264.7 cell-derived osteoclastogenesis and bone resorption pit formation in vitro, which was further supported by the reduced expression of F-actin and osteoclast-specific genes. According to the Western blot analysis, inhibition of IκBα phosphorylation in the NF-κB signaling pathway, not the phosphorylation of MAPKs, was responsible for the suppressive effect of CIM on osteoclastogenesis. Animal experiments demonstrated that CIM alleviated Ti particle-induced bone erosion and osteoclast accumulation in murine calvaria.

Conclusion: The current study suggested for the first time that CIM can inhibit RANKL-induced osetoclastogenesis by suppressing the NF-κB signaling pathway in vitro and prevent periprosthetic osteolysis in vivo. These findings suggest the potential of CIM as a therapeutic in ALP.

3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications

3D and 4D printing are cutting-edge technologies for precise and expedited manufacturing of objects ranging from plastic to metal. Recent advances in 3D and 4D printing technologies in dentistry and maxillofacial surgery enable dentists to custom design and print surgical drill guides, temporary and permanent crowns and bridges, orthodontic appliances and orthotics, implants, mouthguards for drug delivery. In the present review, different 3D printing technologies available for use in dentistry are highlighted together with a critique on the materials available for printing. Recent reports of the application of these printed platformed are highlighted to enable readers appreciate the progress in 3D/4D printing in dentistry.

Fabrication of nanoparticles for bone regeneration: new insight into applications of nanoemulsion technology

Introducing synthetic bone substitutes into the clinic was a major breakthrough in the regenerative medicine of bone. Despite many advantages of currently available bone implant materials such as biocompatiblity and osteoconductivity, they still suffer from relatively poor bioactivity, osteoinductivity and osteointegration. These properties can be effectively enhanced by functionalization of implant materials with nanoparticles such as osteoinductive hydroxyapatite nanocrystals, resembling inorganic part of the bone, or bioactive polymer nanoparticles providing sustained delivery of pro-osteogenic agents directly at implantation site. One of the most widespread techniques for fabrication of nanoparticles for bone regeneration applications is nanoemulsification. It allows manufacturing of nanoscale particles (<100 nm) that are injectable, 3D-printable, offer high surface-area-to-volume-ratio and minimal mass transport limitations. Nanoparticles obtained by this technique are of particular interest for biomedical engineering due to fabrication procedures requiring low surfactant concentrations, which translates into reduced risk of surfactant-related in vivo adverse effects and improved biocompatibility of the product. This review discusses nanoemulsion technology and its current uses in manufacturing of nanoparticles for bone regeneration applications. In the first section, we introduce basic concepts of nanoemulsification including nanoemulsion formation, properties and preparation methods. In the next sections, we focus on applications of nanoemulsions in fabrication of nanoparticles used for delivery of drugs/biomolecules facilitating osteogenesis and functionalization of bone implants with special emphasis on biomimetic hydroxyapatite nanoparticles, synthetic polymer nanoparticles loaded with bioactive compounds and bone-targeting nanoparticles. We also highlight key challenges in formulation of nanoparticles via nanoemulsification and outline potential further improvements in this field.