The Effects of Silver, Zinc Oxide, and Titanium Dioxide Nanoparticles Used as Dentin Pretreatments on the Microshear Bond Strength of a Conventional Glass Ionomer Cement to Dentin

Assessing the Impact of Nano-Graphene Oxide Addition on Surface Microhardness and Roughness of Glass Ionomer Cements: A Laboratory Study

Background

Nanomaterials, including nano-graphene oxide (nGO), have emerged as promising modifiers for dental materials. Therefore, this study investigated the effect of incorporating nGO into conventional glass ionomer cement (CGIC) and resin-modified glass ionomer cement (RMGIC) on surface roughness and hardness.

Methods

Sixty disk-shaped specimens (2 × 6 mm) were divided into six groups: CGIC, RMGIC, CGIC with 1 wt.% nGO, CGIC with 2 wt.% nGO, RMGIC with 1 wt.% nGO, and RMGIC with 2 wt.% nGO. Surface roughness (Ra) and Vickers microhardness (VHN) were measured using a surface profilometer and Vickers microhardness tester, respectively. Statistical analysis employed the Kruskal-Wallis and Mann-Whitney tests (p <0.05).

Results

The microhardness of RMGICs significantly increased with 1% and 2% nGO (p=0.017, P=0.001, respectively), while CGICs showed a significant decrease in VHN with nGO incorporation (p=0.001). VHN values of all CGIC groups were significantly higher than those of all RMGIC groups (p=0.001). Mean surface roughness values for all CGICs were significantly higher than those of RMGIC groups (p=0.001). Within the RMGIC groups, mean Ra values of RMGIC + 1 wt.% nGO and RMGIC + 2 wt.% nGO groups decreased significantly compared to the RMGIC control group (p=0.001, p=0.001, respectively). Among CGIC groups, mean Ra values of 1 wt.% and 2 wt.% nGO/CGIC groups were significantly higher than the CGIC control group (p=0.016, p=0.001).

Conclusion

Incorporating nGO into RMGICs increased surface microhardness while reducing surface roughness, offering potential advantages for clinical applications. Conversely, adding nGO to CGICs increased surface roughness and decreased surface hardness. These findings emphasize the potential benefits of utilizing nGO in RMGICs and their implications in clinical practice.

Nanoparticle Augmentation of Adhesive Systems: Impact on Tensile Strength in Fiberglass Post Placement within Root Dentin

BACKGROUND Modification of the glass fiber post (GFP) with titanium dioxide or silver particles can improve the durability and reliability of dental treatments for ensuring long-term success. This research assessed the tensile bond strength (TBS) of an adhesive system used for cementing GFPs into root dentin following the incorporation of nanoparticles of titanium dioxide (NTiO2) and silver (NAg). MATERIAL AND METHODS Sixty human maxillary canines were prepared to create a 10-mm intra-radicular space for post placement from the cementoenamel junction. The specimens were randomly allocated into 2 groups (a non-thermocycling group and a thermocycling group). Each group was divided into 3 subgroups (10 samples each) according to the adhesive system used (adhesive system devoid of any addition, adhesive system including 1% NAg, and adhesive system infused with 1% NTiO2). TBS tests were conducted and recorded in MPa using a Universal Testing Machine, with an axial load applied at a rate of 0.5 mm/min until failure. The TBS for both groups (non-thermocycling and thermocycling) was measured in megapascals (MPa), and the failure type was recorded. The data were statistically analyzed using one-way analysis of variance (ANOVA) and Tukey's test with P.

Novel biomimetic peptide-loaded chitosan nanoparticles improve dentin bonding via promoting dentin remineralization and inhibiting endogenous matrix metalloproteinases

OBJECTIVE

This study aims to synthesize novel chitosan nanoparticles loaded with an amelogenin-derived peptide QP5 (TMC-QP5/NPs), investigate their remineralization capability and inhibitory effects on endogenous matrix metalloproteinases (MMPs), and evaluate the dentin bonding properties of remineralized dentin regulated by TMC-QP5/NPs.

METHODS

TMC-QP5/NPs were prepared by ionic crosslinking method and characterized by dynamic light scattering method, scanning electron microscopy, transmission electron microscope, atomic force microscope, Fourier transform infrared spectroscopy, and differential scanning calorimetry. The encapsulation and loading efficiency of TMC-QP5/NPs and the release of QP5 were examined. To evaluate the remineralization capability of TMC-QP5/NPs, the mechanical properties, and the changes in structure and composition of differently conditioned dentin were characterized. The MMPs inhibitory effects of TMC-QP5/NPs were explored by MMP Activity Assay and in-situ zymography. The dentin bonding performance was detected by interfacial microleakage and microshear bond strength (μSBS).

RESULTS

TMC-QP5/NPs were successfully synthesized, with uniform size, good stability and biosafety. The encapsulation and loading efficiency of TMC-QP5/NPs was respectively 69.63 ± 2.22% and 13.21 ± 0.73%, with a sustained release of QP5. TMC-QP5/NPs could induce mineral deposits on demineralized collagen fibers and partial occlusion of dentin tubules, and recover the surface microhardness of dentin, showing better remineralization effects than QP5. Besides, TMC-QP5/NPs significantly inhibited the endogenous MMPs activity. The remineralized dentin induced by TMC-QP5/NPs exhibited less interfacial microleakage and higher μSBS, greatly improved dentin bonding.

SIGNIFICANCE

This novel peptide-loaded chitosan nanoparticles improved resin-dentin bonding by promoting dentin remineralization and inactivating MMPs, suggesting a promising strategy for optimizing dentin adhesive restorations.

Synthesis and characterization of mesoporous zinc oxide nanoparticles and evaluation of their biocompatibility in L929 fibroblasts

OBJECTIVES

This study aimed to synthesize and characterize mesoporous zinc oxide nanoparticles (ZnO NPs) and also to evaluate the cytotoxicity of mesoporous ZnO NPs on L929 mouse fibroblast cell lines using 3-(4,5- dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay.

MATERIALS AND METHODS

The synthesized mesoporous ZnO NPs were extensively characterized using X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) analysis, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectra (EDAX), Fourier-transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS). The cytotoxicity of mesoporous ZnO NPs was assessed by MTT assay. The study groups for cytotoxicity assay were normal saline, 0.1% calcined mesoporous ZnO NP solution, 1% calcined mesoporous ZnO NP solution, 0.1% noncalcined mesoporous ZnO NP solution, 1% noncalcined mesoporous ZnO NP solution, 0.1% ZnO NP solution, 1% ZnO NP solution, 2% chlorhexidine, and phosphate-buffered saline (PBS). The percentages of mean ± standard deviation of viable cells were analyzed.

RESULTS

Characterization of mesoporous ZnO NPs revealed that all the particles were in a more or less spherical shape with a wide particle size distribution of 70-100 nm. TEM image showed the uniformed and aggregated ZnO NPs with a typical size of 10-15 nm. BET analysis showed a mesoporous structure for the prepared mesoporous ZnO NPs. According to the MTT assay, chlorhexidine had the lowest cell viability percentage. Cell viability percentages of 0.1% mesoporous ZnO NP solutions (calcined and noncalcined) were statistically, significantly higher than 0.1% ZnO NP solution (p < .05). Cell viability percentages of 0.1% calcined and noncalcined mesoporous ZnO NP solutions and 0.1% ZnO NP solution were statistically, significantly higher than the 1% solutions (p < .05).

CONCLUSION

Mesoporous ZnO NPs exhibited less cytotoxicity against L929 mouse fibroblast cell lines compared to CHX and ZnO NPs, hence are safe to use.

Evaluation of the Effects of Different Types of Resin Cement Systems on the Push-Out Bond Strength of the Fiber Post to Intracanal Dentin in Anterior Primary Teeth

Background

This study aimed to evaluate the effects of using three different resin cements on push-out bond strength (PBS) of fiber posts to root canal dentin of primary teeth.

Methods

Fifty primary canines were randomly divided into five experimental groups according to the type of the luting agent used for fiber post cementation after endodontic treatment and post space preparation as the following: Group 1: glass ionomer cement (GIC), Group 2: flowable resin composite, Group 3: etch and rinse (E&R) resin cement, Group 4: self-etch (SE) resin cement, Group 5: self-adhesive (SA) resin cement. The PBS values of the cemented fiber posts to root canals were measured. The data were statistically analyzed using a one-way analysis of variance, followed by Tukey's post hoc test.

Results

The highest mean PBS value was observed in Group 4 (SE resin cement), followed by Group 3 (E&R resin cement), and the lowest PBS value belonged to Group 1 (GIC), followed by Group 5 (p-values < 0.05). The mean PBS of Group 3 (E&R resin cement) was significantly higher than those of Groups 1 (GIC), 2 (flowable resin composite), and 5 (SA resin cement) (p-values < 0.05). However, no significant difference was found between the mean PBS of GIC and SA resin cement (p-value >0/05).

Conclusion

Using SE resin cement for fiber post cementation in primary anterior teeth showed the best results, followed by E&R resin cement. The lowest PBS was observed for GIC, followed by SA resin cement.

The effect of nanobased irrigants on the root canal dentin microhardness: an ex-vivo study

BACKGROUND

Given the favorable antimicrobial properties of zinc oxide (ZnONPs), standard silver (AgNPs), and imidazolium-based silver (Im-AgNPs) nanoparticles, this study aimed to evaluate their influence on the microhardness of root canal dentin.

METHODS

In this experimental study, 40 mandibular premolars were decoronated at the cementoenamel junction and longitudinally sectioned into halves to create 80 specimens. They were randomly allocated to 5 groups (n = 16) and irrigated with ZnONPs, AgNPs, Im-AgNPs, NaOCl, or normal saline (as the negative control) for 15 min. The Vickers Hardness Number (VHN) was measured on each root canal third before and after being soaked in irrigants. Statistical analysis was performed using paired t-test, one-way ANOVA, and post hoc Tukey's test (α = 0.05).

RESULTS

Im-AgNPs and ZnONPs irrigants improved the microhardness of root dentin, whereas, AgNPs and NaOCl decreased it. ZnONPs yielded the highest VHN at the coronal third (P˂0.001), while the Im-AgNPs provided the highest VHN at the middle and apical thirds (P˂0.001). The AgNPs group showed the lowest VHN at the apical third.

CONCLUSIONS

The irrigants containing Im-AgNPs and ZnONPs significantly enhanced the root dentin microhardness. However, the use of AgNPs resulted in decreased microhardness.

Bringing resistance modulation to methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE) strains using a quaternary ammonium compound coupled with zinc oxide nanoparticles

Nowadays, there are concerns about the inadequacy of new antimicrobials and the rise of antimicrobial resistance. Hence, novel antibacterial agents need to be discovered. In this respect, the use of nanoparticles (NPs) seems promising. Zinc oxide nanoparticles (ZnONPs) are functional and inexpensive NPs that possess antimicrobial characteristics, stability, microbial selectivity, and an easy manufacturing procedure. Imidazolium is one of the quaternary ammonium compounds (QACs) frequently employed as antimicrobial materials in industrial and clinical fields. The present study successfully employed imidazolium to couple with ZnONPs to improve their antimicrobial properties. The antimicrobial activities of ZnONPs doped with imidazolium (IM@ZnONPs) compared to ZnONPs and zinc (Zn) ions against some pathogen microorganism species including Streptococcus aureus (S. aureus), Enterococcus faecalis (E. faecalis), methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and Candida albicans (C. albicans) were evaluated by the microdilution method. The minimum inhibitory concentration (MIC) results revealed that the antimicrobial activities of Zn ions, ZnONPs, and IM@ZnONPs were concentration-dependent. Moreover, we found that the nanoparticulate forms of Zn had considerably stronger antibacterial activities, particularly against VRE and MRSA, compared to Zn ions which failed to restrain the microbial strains at the tested microdilutions of this experiment (MIC: ≥512 µg/mL). Interestingly, the incorporation of imidazolium into ZnONPs resulted in significant inhibition of microbial growth in antimicrobial-resistant pathogens at low concentrations (MIC: 32 µg/mL) and effectively improved the monodispersity of the final coated NPs in terms of size and morphology. To sum up, IM@ZnONPs can be a favorable substitute for conventional antimicrobial agents to combat antimicrobial resistance in many fields, including pharmaceuticals, dental materials, and cosmetic products.

Incorporation of Nanomaterials in Glass Ionomer Cements-Recent Developments and Future Perspectives: A Narrative Review

Glass ionomer cements (GICs), restorative materials with commercial availability spanning over five decades, are widely applied due to their advantages (including bio-compatibility, fluoride release, or excellent bonding properties). However, GICs have shortcomings. Among the disadvantages limiting the application of GICs, the poor mechanical properties are the most significant. In order to enhance the mechanical or antimicrobial properties of these materials, the addition of nanomaterials represents a viable approach. The present paper aims to review the literature on the application of different types of nanomaterials for the enhancement of GICs' mechanical and antimicrobial properties, which could lead to several clinical benefits, including better physical properties and the prevention of tooth decay. After applying the described methodology, representative articles published in the time period 2011-present were selected and included in the final review, covering the modification of GICs with metallic nanoparticles (Cu, Ag), metallic and metalloid oxide nanoparticles (TiO₂, ZnO, MgO, Al₂O₃, ZrO₂, SiO₂), apatitic nanomaterials, and other nanomaterials or multi-component nanocomposites.

Comparative study of effective antibiofilm activity of beneficial microbes-mediated zirconia nanoparticles

In the present study, beneficial microbes-mediated zirconia nanoparticles were prepared using endophytic bacteria isolated from the seed of Terminalia chebula which were evaluated on inhibition of bacterial adherence and promotion to exhibit antibiofilm properties. The structure and distribution of the zirconia nanoparticles were examined through SEM (Scanning Electron Microscopy), EDS (Energy-Dispersive X-Ray spectroscopy), and XRD (X-ray diffraction analysis), which reveal the distribution of the particles. The morphology of biogenic zirconia nanoparticles was monoclinic and cubic. The formation of zirconia particle was confirmed using UV spectrum and the functional groups were intensified in FTIR (Fourier-transform infrared spectroscopy). The antibiofilm activity of the synthesized nanoparticles was tested in oral pathogens that cause biofilm by membrane integrity and leads to periodontal associated disease. The results showed that the particles had a significant effect on biofilm removal caused by oral pathogens. For determined concentration, the cytotoxicity of the endophytic bacterial facilitated zirconia nanoparticle (Zr NPs) was examined in HGF (Human gingival fibroblast cell line).

Biological and Physicochemical Characterization of Self-Adhesive Protective Coating Dental Restorative Material after Incorporation of Antibacterial Nanoparticles

This study evaluated the physicochemical and antibacterial properties of EQUIATM coat liquid (E) after incorporation of zinc oxide (ZnO) and titanium dioxide (TiO2) nanoparticles. ZnO and TiO2 (1 wt.% and 2 wt.%) were dispersed in EQUIA coat. Principal component analysis (PCA) and cluster analysis were performed to visualize systemic variation. Antibacterial activity was evaluated by colony-forming units and crystal violet staining using Streptococcusmutans and Lactobacillusacidophilus after 24 h, 48 h, and 72 h, and the microstructure was studied by scanning electron microscopy. The weight change was analyzed at 1 and 21 days. The PCA for TiO2- and ZnO-based groups showed 100% variance at all spectral ranges at 600−800/cm and 800−1200/cm, whereas 1200−1800/cm and 2700−3800/cm spectral regions demonstrated 99% variance. The absorbance values were significant (p < 0.05) for both nanoparticles-based adhesives, and the specimens with 2 wt.% ZnO showed the maximum response by minimum bacterial attachment, and the control group showed the least response by maximum attachment. The weight change percentage was reduced after the incorporation of antibacterial nanoparticles. It is suggested that EQUIATM coat containing nanoparticles exhibits promising results, and it may be recommended to clinically use as an improved coating material.

Applications of Titanium Dioxide Nanostructure in Stomatology

Breakthroughs in the field of nanotechnology, especially in nanochemistry and nanofabrication technologies, have been attracting much attention, and various nanomaterials have recently been developed for biomedical applications. Among these nanomaterials, nanoscale titanium dioxide (nano-TiO₂) has been widely valued in stomatology due to the fact of its excellent biocompatibility, antibacterial activity, and photocatalytic activity as well as its potential use for applications such as dental implant surface modification, tissue engineering and regenerative medicine, drug delivery carrier, dental material additives, and oral tumor diagnosis and treatment. However, the biosafety of nano-TiO₂ is controversial and has become a key constraint in the development of nano-TiO₂ applications in stomatology. Therefore, in this review, we summarize recent research regarding the applications of nano-TiO₂ in stomatology, with an emphasis on its performance characteristics in different fields, and evaluations of the biological security of nano-TiO₂ applications. In addition, we discuss the challenges, prospects, and future research directions regarding applications of nano-TiO₂ in stomatology that are significant and worthy of further exploration.

Push-out bond strength of mineral trioxide aggregate with addition of titanium dioxide, silver, and silicon dioxide nanoparticles: An in vitro comparative study

Background

The ultimate goal of endodontic therapy is to eliminate all microorganisms present inside root canal and thereby sealing all the possible communicating pathways between pulpal and periradicular tissues, which prevents all the factors that cause recontamination and reinfection of the root canal system. If endodontic treatment fails, next approach is surgical endodontics. Bioceramics are recently introduced materials specifically designed for their potential use in medical field and dentistry.

Aim

To evaluate and compare the push-out bond strength of mineral trioxide aggregate (MTA) by adding titanium dioxide (TiO2), silver, and silicon dioxide nanoparticles.

Materials and Methods

Totally, 60 single-rooted human teeth were used. Middle third of the root was sectioned to obtain 2-mm thick root section. Acrylic was adapted to the section to obtain disks of 5 mm diameter and 2 mm thickness. Canal was prepared by GG Drill. Samples were divided into four groups of 15 each (n = 15): • Group I (control): MTA • Group II: MTA + TiO₂ nanoparticles. • Group III: MTA + silver nanoparticles. • Group IV: MTA + silicon dioxide nanoparticles. The cement mixture was compacted into the canal. Samples were subjected to push-out bond strength using universal testing machine.

Statistical Analysis Used

The data were analyzed statistically by analysis of variance and post hoc comparison by Tukey's t-test.

Results

The highest push-out bond strength was shown by Group II (MTA with TiO2 nanoparticles), followed by Group III (MTA with silver nanoparticles) and Group I (MTA control group). The lowest push-out bond strength was shown by Group III (MTA with silicon dioxide nanoparticles).

Conclusions

TiO₂ and silver nanoparticles when added into MTA lead to an increase in push-out bond strength of MTA.