The Cleaning Effect of the Photocatalysis of TiO2-B＠anatase Nanowires on Biological Activity on a Titanium Surface

Vacuum Ultraviolet (VUV) Light Photofunctionalization to Induce Human Oral Fibroblast Transmigration on Zirconia

Soft tissue adhesion and sealing around dental and maxillofacial implants, related prosthetic components, and crowns are a clinical imperative to prevent adverse outcomes of periodontitis and periimplantitis. Zirconia is often used to fabricate implant components and crowns. Here, we hypothesized that UV treatment of zirconia would induce unique behaviors in fibroblasts that favor the establishment of a soft tissue seal. Human oral fibroblasts were cultured on zirconia specimens to confluency before placing a second zirconia specimen (either untreated or treated with one minute of 172 nm vacuum UV (VUV) light) next to the first specimen separated by a gap of 150 µm. After seven days of culture, fibroblasts only transmigrated onto VUV-treated zirconia, forming a 2.36 mm volume zone and 5.30 mm leading edge. Cells migrating on VUV-treated zirconia were enlarged, with robust formation of multidirectional cytoplastic projections, even on day seven. Fibroblasts were also cultured on horizontally placed and 45° and 60° tilted zirconia specimens, with the latter configurations compromising initial attachment and proliferation. However, VUV treatment of zirconia mitigated the negative impact of tilting, with higher tilt angles increasing the difference in cellular behavior between control and VUV-treated specimens. Fibroblast size, perimeter, and diameter on day seven were greater than on day one exclusively on VUV-treated zirconia. VUV treatment reduced surface elemental carbon and induced superhydrophilicity, confirming the removal of the hydrocarbon pellicle. Similar effects of VUV treatment were observed on glazed zirconia specimens with silica surfaces. One-minute VUV photofunctionalization of zirconia and silica therefore promotes human oral fibroblast attachment and proliferation, especially under challenging culture conditions, and induces specimen-to-specimen transmigration and sustainable photofunctionalization for at least seven days.

Photoreactive Coating Material as an Effective and Durable Antimicrobial Composite in Reducing Bacterial Load on Surfaces in Livestock

Titanium dioxide (TiO2) is a well-known photocatalytic compound that can be used to effectively reduce the presence of pathogens in human and animal hospitals via ROS release. The aim of this study was to investigate the efficacy of a polymer-based composite layer containing TiO2 and zinc oxide (ZnO) against Escherichia coli (E. coli) of animal origin. We showed that the photocatalyst coating caused a significant (p < 0.001) reduction in pathogen numbers compared to the control with an average reduction of 94% over 30 min. We used six light sources of different wattages (4 W, 7 W, 9 W, 12 W, 18 W, 36 W) at six distances (35 cm, 100 cm, 150 cm, 200 cm, 250 cm, 300 cm). Samples (n = 2160) were taken in the 36 settings and showed no significant difference in efficacy between light intensity and distance. We also investigated the influence of organic contaminant that resulted in lower activity as well as the effect of a water jet and a high-pressure device on the antibacterial activity. We found that the latter completely removed the coating from the surface, which significantly (p < 0.0001) reduced its antibacterial potential. As a conclusion, light intensity and distance does not reduce the efficacy of the polymer, but the presence of organic contaminants does.

[Surface modification of titanium implant with hBMP-2/hIGF-1 for promoting biocompatibility and osteogenesis]

OBJECTIVE

To prepare the human bone morphogenetic protein-2(hBMP-2)/human insulin-like growth factor-1(hIGF-1)coating titanium(Ti)and assess its performance as a dental implant material.

METHODS

hBMP-2 and hIGF-1 were coated to the smooth surface of a Ti plate, and its efficacy for promoting bone formation and bone integration was compared with a pristine Ti plate.The surface characteristics of the metal samples were evaluated using scanning electron microscope (SEM) and by contact angle measurement.MG63 cells were seeded on the surface of the Ti plates, and MTT assay and alizarin red staining was used to examine the cell proliferation and formation of calcified nodules, respectively.Alkaline phosphatase (ALP)secretion of the cells was examined with ELISA, and cellular expressions of osteocalcin and osteopontin were detected with Western blotting for assessing osteogenesis.

RESULTS

SEM examination showed that the surface of Ti with hBMP-2 and hIGF-1 coating presented with a radial pattern resembling snowflakes.The contact angles of non-coated Ti, hBMP-2-coated Ti, hIGF-1-coated, and hBMP-2/-hIGF-1-coated Ti samples were 83.2°, 54°, 56° and 54°, respectively.Compared with the non-coated Ti plate, the surface-modified Ti samples showed a significantly smaller contact angle (P=0.032, 0.029, and 0.028), indicating a good hydrophilicity of the samples.MTT assay showed that MG63 cells grew well on the surface of the coated Ti plates.The hBMP-2/IGF-1 coating significantly induced cellular secretion of ALP(P=0.021, 0.014)and obviously promoted osteogenesis of MG63 cells (P < 0.05).Western blotting results showed that hBMP-2/IGF-1 coating significantly enhanced the expressions of osteocalcin and osteopontin in the seeded cells (P < 0.05).

CONCLUSION

hBMP-2 and hIGF-1 coating of Ti material can promote osteogenesis of the cells seeded on its surface to improve the performance of such Ti material as dental implants.

Controllable One-Step Synthesis of Mixed-Phase TiO2 Nanocrystals with Equivalent Anatase/Rutile Ratio for Enhanced Photocatalytic Performance

In this study, the novel mixed-phase TiO2 nanocrystals (s-TiO2) with nearly equivalent anatase/rutile ratio were fabricated in the reagent of sec-butanol at the relatively low temperature of 80 °C by using a facile one-step condensing reflux method. The photocatalytic water splitting hydrogen production performance of s-TiO2 nanocrystals is close to that of commercial TiO2 (P25), and its photocatalytic degradation performance is about four times that of P25. The energy-level staggered interfaces and surface bridged hydroxyl groups significantly increased due to the anatase/rutile mixed-phase crystal structure and high specific surface area, which might generate the synergistic effect for the improvement of photocatalytic degradation.