Modification of palm kernel oil esters nanoemulsions with hydrocolloid gum for enhanced topical delivery of ibuprofen

Development and characterisation of ibuprofen-loaded nanoemulsion with enhanced oral bioavailability

Lipophilic compounds constitute a majority of therapeutics in the pipeline of drug discovery. Despite possessing enhanced efficacy and permeability, some of these drugs suffer poor solubility necessitating the need of a suitable drug delivery system. Nanoemulsion is a drug delivery system that provides enhanced solubility for poorly soluble drugs in an attempt to improve the oral bioavailability. The purpose of this study is to develop a nanoemulsion system using ibuprofen as a model drug in order to investigate the potential of this colloidal system to enhance the absorption of poorly water-soluble drugs. Ibuprofen loaded-nanoemulsion with different drug concentrations (1.5, 3 and 6% w/w) were formulated from olive oil, sucrose ester L-1695 and glycerol using D-phase emulsification technique. A pseudoternary phase diagram was utilised to identify the optimal excipient composition to formulate the nanoemulsion system. In vitro diffusion chamber studies using rodent intestinal linings highlighted improved absorption profile when ibuprofen was delivered as nanoemulsion in comparison to microemulsions and drug-in-oil systems. This was further corroborated by in vivo studies using rat model that highlighted a two-fold increase in ibuprofen absorption when the drug was administered as a nanoemulsion relative to drug-in-oil system. On the other hand, when ibuprofen was administered as microemulsions, only a 1.5-fold increase in absorption was observed relative to drug-in-oil system. Thus, this study highlights the potential of using nanoemulsion as a drug delivery system to enhance the oral bioavailability of hydrophobic drugs.

Palm Oil in Lipid-Based Formulations and Drug Delivery Systems

Palm oil is natural oil packed with important compounds and fatty acids ready to be exploited in lipid-based formulations and drug delivery. Palm oil and palm kernel oil contain long-chain and medium-chain triglycerides, respectively, including phytonutrients such as tocotrienol, tocopherol and carotenes. The exploitation of these compounds in a lipid-based formulation would be able to address hydrophobicity, lipophilicity, poor bioavailability and low water-solubility of many current drugs. The utilisation of palm oil as part of the drug delivery system seemed to improve the bioavailability and solubility of the drug, stabilising emulsification of formulation between emulsifier and surfactant, promoting enhanced drug permeability and performance, as well as extending the shelf-life of the drug. Despite the complexity in designing lipid-based formulations, palm oil has proven to offer dynamic behaviour in providing versatility in drug design, form and delivery. However, the knowledge and application of palm oil and its fractions in lipid-based formulation are scarce and interspersed. Therefore, this study aims to focus on the research and outcomes of using palm oil in lipid-based formulations and drug delivery systems, due to the importance of establishing its capabilities and benefits.

Novel nano therapeutic materials for the effective treatment of rheumatoid arthritis-recent insights

Rheumatoid arthritis (RA) is the most common complex multifactorial joint related autoimmune inflammatory disease with unknown etiology accomplished with increased cardiovascular risks. RA is characterized by the clinical findings of synovial inflammation, autoantibody production, and cartilage/bone destruction, cardiovascular, pulmonary and skeletal disorders. Pro-inflammatory cytokines such as IL-1, IL-6, IL-8, and IL-10 were responsible for the induction of inflammation in RA patients. Drawbacks such as poor efficacy, higher doses, frequent administration, low responsiveness, and higher cost and serious side effects were associated with the conventional dosage forms for RA treatment. Nanomedicines were recently gaining more interest towards the treatment of RA, and researchers were also focusing towards the development of various anti-inflammatory drug loaded nanoformulations with an aid to both actively/passively targeting the inflamed site to afford an effective treatment regimen for RA. Alterations in the surface area and nanoscale size of the nanoformulations elicit beneficial physical and chemical properties for better pharmacological activities. These drug loaded nanoformulations may enhances the solubility of poorly water soluble drugs, improves the bioavailability, affords targetability and may improve the therapeutic activity. In this regimen, the present review focus towards the novel nanoparticulate formulations (nanoparticles, nanoemulsions, solid lipid nanoparticles, nanomicelles, and nanocapsules) utilized for the treatment of RA. The recent advancements such as siRNA, peptide and targeted based nanoparticulate systems for RA treatment were also discussed. Special emphasis was provided regarding the pathophysiology, prevalence and symptoms towards the development of RA.

Enhancement of physicochemical properties of nanocolloidal carrier loaded with cyclosporine for topical treatment of psoriasis: in vitro diffusion and in vivo hydrating action

Psoriasis is a chronic autoimmune disease that cannot be cured. It can however be controlled by various forms of treatment, including topical, systemic agents, and phototherapy. Topical treatment is the first-line treatment and favored by most physicians, as this form of therapy has more patient compliance. Introducing a nanoemulsion for transporting cyclosporine as an anti-inflammatory drug to an itchy site of skin disease would enhance the effectiveness of topical treatment for psoriasis. The addition of nutmeg and virgin coconut-oil mixture, with their unique properties, could improve cyclosporine loading and solubility. A high-shear homogenizer was used in formulating a cyclosporine-loaded nanoemulsion. A D-optimal mixture experimental design was used in the optimization of nanoemulsion compositions, in order to understand the relationships behind the effect of independent variables (oil, surfactant, xanthan gum, and water content) on physicochemical response (particle size and polydispersity index) and rheological response (viscosity and k-value). Investigation of these variables suggests two optimized formulations with specific oil (15% and 20%), surfactant (15%), xanthan gum (0.75%), and water content (67.55% and 62.55%), which possessed intended responses and good stability against separation over 3 months' storage at different temperatures. Optimized nanoemulsions of pH 4.5 were further studied with all types of stability analysis: physical stability, coalescence-rate analysis, Ostwald ripening, and freeze-thaw cycles. In vitro release proved the efficacy of nanosize emulsions in carrying cyclosporine across rat skin and a synthetic membrane that best fit the Korsmeyer-Peppas kinetic model. In vivo skin analysis towards healthy volunteers showed a significant improvement in the stratum corneum in skin hydration.

Formulation development and optimization of palm kernel oil esters-based nanoemulsions containing sodium diclofenac

Response surface methodology was employed to study the effect of formulation composition variables, water content (60%–80%, w/w) and oil and surfactant (O/S) ratio (0.17–1.33), as well as high-shear emulsification conditions, mixing rate (300–3,000 rpm) and mixing time (5–30 minutes) on the properties of sodium diclofenac-loaded palm kernel oil esters-nanoemulsions. The two response variables were droplet size and viscosity. Optimization of the conditions according to the four variables was performed for preparation of the nanoemulsions with the minimum values of particle size and viscosity. The results showed that the experimental data could be sufficiently fitted into a third-order polynomial model with multiple regression coefficients (R²) of 0.938 and 0.994 for the particle size and viscosity, respectively. Water content, O/S ratio and mixing time, quadrics of all independent variables, interaction between O/S ratio and mixing rate and between mixing time and rate, as well as cubic term of water content had a significant effect (P<0.05) on the particle size of nanoemulsions. The linear effect of all independent variables, quadrics of water content and O/S ratio, interaction of water content and O/S ratio, as well as cubic term of water content and O/S ratio had significant effects (P<0.05) on the viscosity of all nanoemulsions. The optimum conditions for preparation of sodium diclofenac nanoemulsions were predicted to be: 71.36% water content; 0.69 O/S ratio; 950 rpm mixing rate, and 5 minute mixing time. The optimized formulation showed good storage stability in different temperatures.

Nanoemulsion containing dapsone for topical administration: a study of in vitro release and epidermal permeation

BACKGROUND

Topical administration of dapsone can be an alternative route for treatment of leprosy and can also provide new therapeutic applications for an established drug. However, the physicochemical properties of dapsone make it difficult to incorporate into conventional formulations. The current study was directed toward developing a stable nanoemulsion that contains dapsone which can be adapted for topical use.

METHODS

Nanoemulsions were prepared using isopropyl myristate or n-methyl-pyrrolidone as the oil phase, and characterized according to their mean droplet size, conductivity, refractive index, pH, drug content, and stability. The in vitro release of dapsone and its ability to permeate the epidermis were also evaluated.

RESULTS

Physicochemical characterization demonstrated that nanosystems were formed, which had a uniform droplet distribution and a pH compatible with the skin surface. Use of n-methyl-pyrrolidone provided a greater nanoemulsion region and higher solubilization of dapsone, and increased the in vitro release rate when compared with a nanoemulsion prepared using isopropyl myristate. However, use of isopropyl myristate promoted an increase in in vitro epidermal permeation that followed the Higuchi model. This demonstrates the ability of a nanosystem to influence permeation of dapsone through the skin barrier. Furthermore, the nanoemulsions developed and evaluated here had ideal physicochemical stability over a 3-month period.

CONCLUSION

Incorporation of dapsone into a nanoemulsion may be a promising system for enabling topical delivery of dapsone, while minimizing skin permeation, for the treatment of acne. The method developed here used isopropyl myristate as the oil phase, and promoted permeation of dapsone through the skin barrier for the treatment of leprosy upon use of n-methyl-pyrrolidone as the oil phase.