Solid and liquid lipid-based binary solid lipid nanoparticles of diacerein: in vitro evaluation of sustained release, simultaneous loading of gold nanoparticles, and potential thermoresponsive behavior

Advancements and Challenges of Nanostructured Lipid Carriers for Wound Healing Applications

The current treatments for wound healing still exhibit drawbacks due to limited availability at the action sites, susceptibility to degradation, and immediate drug release, all of which are detrimental in chronic conditions. Nano-modification strategies, offering various advantages that can enhance the physicochemical properties of drugs, have been employed in efforts to maximize the efficacy of wound healing medications. Nowadays, nanostructured lipid carriers (NLCs) provide drug delivery capabilities that can safeguard active compounds from environmental influences and enable controlled release profiles. Consequently, NLCs are considered an alternative therapy to address the challenges encountered in wound treatment. This review delves into the application of NLCs in drug delivery for wound healing, encompassing discussions on their composition, preparation methods, and their impact on treatment effectiveness. The modification of drugs into the NLC model can be facilitated using relatively straightforward technologies such as pressure-based processes, emulsification techniques, solvent utilization methods, or phase inversion. Moreover, NLC production with minimal material compositions can accommodate both single and combination drug delivery. Through in vitro, in vivo, and clinical studies, it has been substantiated that NLCs can enhance the therapeutic potential of various drug types in wound healing treatments. NLCs enhance efficacy by reducing the active substance particle size, increasing solubility and bioavailability, and prolonging drug release, ensuring sustained dosage at the wound site for chronic wounds. In summary, NLCs represent an effective nanocarrier system for optimizing the bioavailability of active pharmacological ingredients in the context of wound healing.

Development and pharmacological evaluation of liposomes and nanocapsules containing paroxetine hydrochloride

Depression is one of the most common psychiatric disorders. Nanotechnology has emerged to optimize the pharmacological response. Therefore, the aim of this work was to develop and characterize liposomes and nanocapsules containing paroxetine hydrochloride and evaluate their antidepressant-like effect using the open field and tail suspension tests in mice. Liposomes and nanocapsules were prepared using the reverse-phase evaporation and nanoprecipitation methods, respectively. The particle size of the formulation ranged from 121.81 to 310.73 nm, the polydispersity index from 0.096 to 0.303, the zeta potential from -11.94 to -34.50 mV, the pH from 5.31 to 7.38, the drug content from 80.82 to 94.36 %, and the association efficiency was 98 %. Paroxetine hydrochloride showed slower release when associated with liposomes (43.82 %) compared to nanocapsules (95.59 %) after 10 h. In Vero cells, in vitro toxicity showed a concentration-dependent effect for paroxetine hydrochloride nanostructures. Both nanostructures decreased the immobility time in the TST at 2.5 mg/kg without affecting the number of crossings in the open field test, suggesting the antidepressant-like effect of paroxetine. In addition, the nanocapsules decreased the number of groomings, reinforcing the anxiolytic effect of this drug. These results suggest that the nanostructures were effective in preserving the antidepressant-like effect of paroxetine hydrochloride even at low doses.

Integrating Natural Deep Eutectic Solvents into Nanostructured Lipid Carriers: An Industrial Look

The industries are searching for greener alternatives for their productions due to the rising concern about the environment and creation of waste and by-products without industrial utility for that specific line of products. This investigation describes the development of two stable nanostructured lipid carriers (NLCs): one is the formulation of a standard NLC, and the other one is the same NLC formulation associated with a natural deep eutectic solvent (NaDES). The research presents the formulation paths of the NLCs through completeness, which encompass dynamic light scattering (DLS), zeta potential tests, and pH. Transmission electron microscopy (TEM) and confocal microscopy were performed to clarify the morphology. Cytotoxicity tests with zebrafish were realized, and the results are complementary to the in vitro outcomes reached with fibroblast L132 tests by the MTT technique and the zymography test. Infrared spectroscopy and X-ray diffractometry tests elucidated the link between the physicochemical characteristics of the formulation and its behavior and properties. Different cooling techniques were explored to prove the tailorable properties of the NLCs for any industrial applications. In conclusion, the compiled results show the successful formulation of new nanocarriers based on a sustainable, eco-friendly, and highly tailorable technology, which presents low cytotoxic potential.

Berberine loaded thermosensitive lipid nanoparticles: in vitro characterization, in silico study, and in vivo anti-arthritic effect

Thermoresponsive drug delivery systems have been used to treat diseases that cause hyperthermia or elevated body tissue temperatures, viz., rheumatoid arthritis and different cancers. The aim of the study was to enhance berberine (BER) release using thermosensitive nanostructured lipid carriers (TNLCs) through intra-articular administration for the management of arthritis. TNLCs were prepared using binary mixtures of stearic acid and decanoic acid as solid and liquid lipids, respectively. Lipid mixtures with an optimum melting point were assessed using differential scanning calorimetry studies. In vitro characterization of the BER TNLCs included particle size, zeta potential, entrapment efficiency, and drug release at 37 °C and 41 °C. Joint diameter measurement, real-time polymerase chain reaction (RT-PC) analysis, enzyme-linked immunosorbent assay (ELISA) for inflammatory markers, and histological evaluation of the dissected joints were all performed in vivo on rats with adjuvant-induced arthritis. In vitro characterization revealed negatively charged BER-loaded TNLCs with a spherical shape, particle size less than 500 nm, BER entrapment efficiency up to 79%, and a high drug release rate at an elevated temperature of 41 °C. In silico studies revealed the affinity of BER to different formula components and to the measured biomarkers. In vivo assessment of the optimum TNLCs showed that BER TNLCs were superior to the BER solution suspension regarding their effect on inflammatory biomarkers, joint diameter, and histological studies.

Effect of Functional Groups in Lipid Molecules on the Stability of Nanostructured Lipid Carriers: Experimental and Computational Investigations

Lipid nanoparticles have been used as drug carriers for decades. Many lipid types have been screened for both solid lipid nanoparticles and nanostructured lipid carriers (NLCs). Specifically, for NLCs that are composed of lipids in the solid form mixed with lipids in the liquid form, compatibility of lipid combination and phase behavior play a significant role in the NLC quality. In this study, stearic acid (STA) and cetyl palmitate (CTP) were used as solid lipids, and oleic acid (OLA), isopropyl palmitate (IPP), and caprylic/capric triglycerides were used as liquid lipids. NLCs were prepared at solid:liquid ratios of 50:50, 70:30, and 90:10, respectively. The characteristics and stability of the prepared NLCs were investigated. Laboratory results showed that the solid lipid had a greater influence on the particle size than the liquid lipid. Meanwhile, cetyl palmitate, an ester compound, provides higher NLC stability compared to stearic acid, a carboxylic acid compound. A MARTINI-based coarse-grained molecular dynamics simulation was used to simulate the lipid droplet in water. The distribution of lipid molecules in the droplet was characterized by the polar group density distribution. Different spatial arrangements of the lipid headgroup and lipid molecules, when CTP or STA was used as solid lipids, might contribute to the different stabilities of prepared NLCs. The understanding of mixed lipid systems via simulations will be a significant tool for screening the type of lipids for drug carriers and other pharmaceutical applications.

QbD-driven development of phospholipid-embedded lipidic nanocarriers of raloxifene: extensive in vitro and in vivo evaluation studies

Raloxifene (RLX) is popularly indicated in treatment of osteoporosis and prevention of breast cancer. Owing to its poor aqueous solubility, high pre-systemic metabolism, intestinal glucuronidation, and P-glycoprotein (P-gp) efflux, however, it demonstrates low (< 2%) and inconsistent oral bioavailability. The current work, Quality by Design (QbD)-driven development of phospholipid-embedded nanostructured lipidic carriers (NLCs) of RLX, accordingly, was undertaken to potentiate its lymphatic uptake, augment oral bioavailability, and possibly reduce drug dosage. Factor screening and failure mode effect analysis (FMEA) studies were performed to delineate high-risk factors using solid lipid (glyceryl monostearate), liquid lipid (vitamin E), and surfactant (Tween 80). Response surface optimization studies were performed employing the Box-Behnken design. Mathematical and graphical methods were adopted to embark upon the selection of optimized NLCs with various critical quality attributes (CQAs) of mean particle size as 186 nm, zeta potential of - 23.6 mV, entrapment efficiency of 80.09%, and cumulative drug release at 12 h of 83.87%. The DSC and FTIR studies, conducted on optimized NLCs, indicated successful entrapment of drug into the lipid matrix. In vitro drug release studies demonstrated Fickian diffusion mechanism. In vivo pharmacokinetic studies in rats construed significant improvement in AUC0-72 h (4.48-folds) and in Cmax (5.11-folds), unequivocally indicating markedly superior (p < 0.001) oral bioavailability of RLX-NLCs vis-à-vis marketed tablet formulation. Subsequently, level "A" in vitro/in vivo correlation (IVIVC) was also successfully attempted between the percentages of in vitro drug dissolved and of in vivo drug absorbed at the matching time points. In vitro cytotoxicity and cellular uptake studies also corroborated higher efficacy and successful localization of coumarin-6-loaded NLCs into MG-63 cells through microfluidic channels.

Niosome as a promising tool for increasing the effectiveness of anti-inflammatory compounds

Niosomes are drug delivery systems with widespread applications in pharmaceutical research and the cosmetic industry. Niosomes are vesicles of one or more bilayers made of non-ionic surfactants, cholesterol, and charge inducers. Because of their bilayer characteristics, similar to liposomes, niosomes can be loaded with lipophilic and hydrophilic cargos. Therefore, they are more stable and cheaper in preparation than liposomes. They can be classified into four categories according to their sizes and structures, namely small unilamellar vesicles (SUVs), large unilamellar vesicles (LUVs,), multilamellar vesicles (MLVs), and multivesicular vesicles (MVVs). There are many methods for niosome preparation, such as thin-film hydration, solvent injection, and heating method. The current study focuses on the preparation methods and pharmacological effects of niosomes loaded with natural and chemical anti-inflammatory compounds in kinds of literature during the past decade. We found that most research was carried out to load anti-inflammatory agents like non-steroidal anti-inflammatory drugs (NSAIDs) into niosome vesicles. The studies revealed that niosomes could improve anti-inflammatory agents' physicochemical properties, including solubility, cellular uptake, stability, encapsulation, drug release and liberation, efficiency, and oral bioavailability or topical absorption. See also the graphical abstract(Fig. 1).

Biomaterial-Based Gene Delivery: Advanced Tools for Enhanced Cartilage Regeneration

Gene therapy has emerged as a promising and innovative approach in cartilage regeneration. Integrating biomaterials into gene therapy offers a unique opportunity to enhance gene delivery efficiency, optimize gene expression dynamics, modulate immune responses, and promote tissue regeneration. Despite the rapid progress in biomaterial-based gene delivery, there remains a deficiency of comprehensive discussions on recent advances and their specific application in cartilage regeneration. Therefore, this review aims to provide a thorough overview of various categories of biomaterials employed in gene delivery, including both viral and non-viral vectors, with discussing their distinct advantages and limitations. Furthermore, the diverse strategies employed in gene therapy are discussed and summarized, such as the utilization of growth factors, anti-inflammatory cytokines, and chondrogenic genes. Additionally, we highlights the significant challenges that hinder biomaterial-based gene delivery in cartilage regeneration, including immune response modulation, gene delivery efficiency, and the sustainability of long-term gene expression. By elucidating the functional properties of biomaterials-based gene therapy and their pivotal roles in cartilage regeneration, this review aims to enhance further advances in the design of sophisticated gene delivery systems for improved cartilage regeneration outcomes.

Fabrication of solid lipid nanoparticles-based patches of paroxetine and their ex-vivo permeation behaviour

Paroxetine is not suitable for oral administration due to its extensive first-pass metabolism, thus resulting in less bioavailability. This study aimed to prepare novel paroxetine-loaded solid lipid nanoparticles (SLNs) based sustained-release transdermal patches to overcome these problems by enhancing drug absorption and bioavailability. Nine formulations of paroxetine SLNs were prepared by the hot melt-homogenization method using different concentrations of glycerol monostearate (Kolliwax) and Tween 80. Then these prepared SLNs were incorporated in a matrix type transdermal patch having a matrix of ethyl cellulose and polyvinyl pyrrolidone in 3:2 with polyvinyl alcohol. The SLNs showed a particle size range of 113-230 nm and an entrapment efficiency of 85.14%. The SLNs showed sustained paroxetine release (77.86-95.63% release) up to 48 h. FTIR studies showed no interaction between drug and formulation components. Paroxetine is evenly distributed in an amorphous form in SLNs, as demonstrated by DSC as well as PXRD analysis. SLNs formulated patches showed higher drug permeation through the skin than drug-based transdermal patches., Draize patch test revealed no sign of erythema after applying paroxetine-loaded SLN patches (score 0) as observed with the marketed product. The developed SLNs based transdermal patches showed increased permeability and sustained release behaviour.

Assembly of nanostructured lipid carriers loaded gefitinib and simvastatin as hybrid therapy for metastatic breast cancer: Codelivery and repurposing approach

Breast cancer represents a life-threatening problem globally. The major challenge in the clinical setting is the management of cancer resistance and metastasis. Hybrid therapy can affect several cellular targets involved in carcinogenesis with a lessening of adverse effects. Therefore, the current study aims to assemble, and optimize a hybrid of gefitinib (GFT) and simvastatin (SIM)-loaded nanostructured lipid carrier (GFT/SIM-NLC) to combat metastatic and drug-resistant breast cancer. GFT/SIM-NLC cargos were prepared using design of experiments to investigate the impact of poloxamer-188 and fatty acids concentrations on the physicochemical and pharmaceutical behavior properties of NLC. Additionally, the biosafety of the prepared GFT/SIM-NLC was studied using a fresh blood sample. Afterward, the optimized formulation was subjected to an MTT assay to study the cytotoxic activity of GFT/SIM-NLC compared to free GFT/SIM using an MCF-7 cell line as a surrogate model for breast cancer. The present results revealed that the particle size of the prepared NLC ranged from (209 to 410 nm) with a negative zeta potential value ranging from (-17.2 to -23.9 mV). Moreover, the optimized GFT/SIM-NLC formulation showed favorable physicochemical properties and promising lymphatic delivery cargos. A biosafety study indicates that the prepared NLC has a gentle effect on erythrocyte hemolysis. Cytotoxicity studies revealed that GFT/SIM-NLC enhanced the killing of the MCF-7 cell line compared to free GFT/SIM. This study concluded that the hybrid therapy of GFT/SIM-NLC is a potential approach to combat metastatic and drug-resistant breast cancer.

Nanostructured lipid carriers containing benznidazole: physicochemical, biopharmaceutical and cellular in vitro studies

Chagas disease is a neglected endemic disease prevalent in Latin American countries, affecting around 8 million people. The first-line treatment, benznidazole (BNZ), is effective in the acute stage of the disease but has limited efficacy in the chronic stage, possibly because current treatment regimens do not eradicate transiently dormant Trypanosoma cruzi amastigotes. Nanostructured lipid carriers (NLC) appear to be a promising approach for delivering pharmaceutical active ingredients as they can have a positive impact on bioavailability by modifying the absorption, distribution, and elimination of the drug. In this study, BNZ was successfully loaded into nanocarriers composed of myristyl myristate/Crodamol oil/poloxamer 188 prepared by ultrasonication. A stable NLC formulation was obtained, with ≈80% encapsulation efficiency (%EE) and a biphasic drug release profile with an initial burst release followed by a prolonged phase. The hydrodynamic average diameter and zeta potential of NLC obtained by dynamic light scattering were approximately 150 nm and -13 mV, respectively, while spherical and well-distributed nanoparticles were observed by transmission electron microscopy. Fourier-transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and small-angle X-ray scattering analyses of the nanoparticles indicated that BNZ might be dispersed in the nanoparticle matrix in an amorphous state. The mean size, zeta potential, polydispersity index, and %EE of the formulation remained stable for at least six months. The hemolytic effect of the nanoparticles was insignificant compared to that of the positive lysis control. The nanoparticle formulation exhibited similar performance in vitro against T. cruzi compared to free BNZ. No formulation-related cytotoxic effects were observed on either Vero or CHO cells. Moreover, BNZ showed a 50% reduction in CHO cell viability at 125 µg/mL, whereas NLC-BNZ and non-loaded NLC did not exert a significant effect on cell viability at the same concentration. These results show potential for the development of new nanomedicines against T. cruzi.

Emerging Advances in Nanocarriers Approaches in the Effective Therapy of Pain Related Disorders: Recent Evidence and Futuristic Needs

Pain disorders are the primary cause of disability nowadays. These disorders, such as rheumatoid arthritis (RA) and osteoarthritis (OA), cause loss of function, joint pain and inflammation and deteriorate the quality of life. The treatment of these inflammatory diseases includes anti-inflammatory drugs administered via intra-articular, topical or oral routes, physical rehabilitation or surgery. Owing to the various side effects these drugs could offer, the novel approaches and nanomaterials have shown potential to manage inflammatory diseases, prolonged half-life of anti-inflammatory drugs, reduced systemic toxicity, provide specific targeting, and refined their bioavailability. This review discusses in brief about the pain pathophysiology and its types. The review summarizes the conventional therapies used to treat pain disorders and the need for novel strategies to overcome the adverse effects of conventional therapies. The review describes the recent advancements in nanotherapeutics for inflammatory diseases using several lipids, polymers and other materials and their excellent efficiency in improving the treatment over conventional therapies. The results of the nanotherapeutic studies inferred that the necessity to use nanocarriers is due to their controlled release, targeting drug delivery to inflamed tissues, low toxicity and biocompatibility. Therefore, it is possible to assert that nanotechnology will emerge as a great tool for advancing the treatment of pain disorders in the near future.

Solid lipid-based nanoparticulate system for sustained release and enhanced in-vitro cytotoxic effect of 5-fluorouracil on skin Melanoma and squamous cell carcinoma

The present study aimed to prepare solid lipid-based nanoparticles (SLNs) using Precirol® ATO 5 as solid lipid and Poloxamer 188 and Tween 80 as surfactant and co-surfactant respectively, and SLNs-derived gel for sustained delivery, enhanced in-vitro cytotoxicity, enhanced cellular uptake of 5-FU and enhanced permeation of 5-FU across the skin. The 5-FU-loaded SLNs were prepared by the hot melt encapsulation method and converted into SLN-derived gel using a gelling agent (Carbopol 940). The 5-FU-loaded SLNs had a particle size in the range of 76.82±1.48 to 327±4.46 nm, zeta potential between -11.3±2.11 and -28.4±2.40 mV, and entrapment efficiency (%) in range of 63.46±1.13 and 76.08±2.42. The FTIR analysis depicted that there was no chemical interaction between 5-FU and formulation components. Differential scanning calorimetric analysis showed thermal stability of 5-FU in the nanoparticles and powdered X-ray diffraction analysis revealed successful incorporation of 5-FU in nanoparticles. The in-vitro release study of 5-FU-loaded SLNs showed biphasic release behavior with initial burst release followed by sustained release over 48 hr. The 5-FU-loaded SLNs showed a greater cytotoxic effect on skin melanoma (B16F10 cells) and squamous cell carcinoma (A-431 cells) as compared to free 5-FU drug solution after 48 hr. Flow cytometry and fluorescence microscopy displayed enhanced quantitative and qualitative cellular uptake of SLNs. The SLNs formulation showed acceptable safety and biocompatible profile after an acute toxicity study in Wistar rats. Moreover, ex-vivo permeation studies depicted 2.13±0.076 folds enhanced flux of 5-FU-loaded SLN derived gel compared to 5-FU plain gel, and skin retention studies revealed target efficiency (%) 2.54±0.03 of 5-FU-loaded SLN derived gel compared to 5-FU plain gel.

Formulation development of lipid polymer hybrid nanoparticles of doxorubicin and its in-vitro, in-vivo and computational evaluation

The purpose of this study was to assess the parameters of doxorubicin (DOX) loaded lipid polymer hybrid nanoparticles (LPHNs) formulation development, and then the bioavailability of DOX were determined in the rabbit model, in order to evaluate the intrinsic outcome of dosage form improvement after the oral administration. LPHNs were prepared by combine approach, using both magnetic stirring and probe sonication followed by its characterization in terms of size-distribution (Zeta Size), entrapment efficiency (EE), loading capacity, and the kinetics of DOX. LPHNPs were further characterized by using scanning electron microscopy (SEM), powder X-Ray diffractometry (P-XRD), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), in vitro and in vivo studies. The molecular modeling was determined through the density functional theory (DFT) simulations and interactions. DOX loaded and unloaded LPHNs were administered orally to the rabbits for bioavailability and pharmacokinetic parameters determinations. The plasma concentration of DOX was determined through high performance liquid chromatography (HPLC). The average size of DOX-loaded LPHNs was 121.90 ± 3.0 nm. The drug loading of DOX was 0.391% ± 0.01 of aqueous dispersion, where its encapsulation efficiency was 95.5% ± 1.39. After oral administration of the DOX-LPHNs, the area under the plasma drug concentration-time curve (AUC) improved about 2-folds comparatively (p < 0.05). DFT simulations were used to understand the interactions of polymers with different sites of DOX molecule. The larger negative binding energies (-9.33 to -18.53 kcal/mol) of the different complexes evince that the polymers have stronger affinity to bind with the DOX molecule while the negative values shows that the process is spontaneous, and the synthesis of DOX-LPHNs is energetically favorable. It was concluded that DOX-LPHNs provides a promising new formulation that can enhance the oral bioavailability, which have optimized compatibilities and improve the pharmacokinetic of DOX after oral administration.

Surface modifications of Gold Nanoparticles: Stabilization and Recent Applications in Cancer Therapy

Gold nanoparticles (GNP) are noble metal nanocarriers that have been recently researched upon for pharmaceutical applications, imaging, and diagnosis. These metallic nanocarriers are easy to synthesize using chemical reduction techniques as their surface can be easily modified. Also, the properties of GNP are significantly affected by its size and shape which mandates its stabilization using suitable techniques of surface modification. Over the past decade, research has focused on surface modification of GNP and its stabilization using polymers, polysaccharides, proteins, dendrimers, and phase-stabilizers like gel phase or ionic liquid phase. The use of GNP for pharmaceutical applications requires its surface modification using biocompatible and inert surface modifiers. The stabilizers used, interact with the surface of GNP to provide either electrostatic stabilization or steric stabilization. This review extensively discusses the surface modification techniques for GNP and the related molecular level interactions involved in the same. The influence of various factors like the concentration of stabilizers used their characteristics like chain length and thickness, pH of the surrounding media, etc., on the surface of GNP and resulting to stability have been discussed in detail. Further, this review highlights the recent applications of surface-modified GNP in the management of tumor microenvironment and cancer therapy.

Investigation of Eutectic Mixtures of Fatty Acids as a Novel Construct for Temperature-Responsive Drug Delivery

Background

Most of the traditional nanocarriers of cancer therapeutic moieties present dose-related toxicities due to the uptake of chemotherapeutic agents in normal body cells. The severe life-threatening effects of systemic chemotherapy are well documented. Doxorubicin, DOX is the most effective antineoplastic agent but with the least specific action that is responsible for severe cardiotoxicity and myelosuppression that necessitates careful monitoring while administering. Stimuli-sensitive/intelligent drug delivery systems, specifically those utilizing temperature as an external stimulus to activate the release of encapsulated drugs, have become a subject of recent research. Thus, it would be ideal to have a nanocarrier comprising safe excipients and controllable drug release capacity to deliver the drug at a particular site to minimize unwanted and toxic effects of chemotherapeutics. We have developed a simple temperature-responsive nanocarrier based on eutectic mixture of fatty acids. This study aimed to develop, physicochemically characterize and investigate the biological safety of eutectic mixture of fatty acids as a novel construct for temperature-responsive drug release potential.

Methods

We have developed phase change material, PCM, based on a series of eutectic mixtures of fatty acids due to their unique and attractive physicochemical characteristics such as safety, stability, cost-effectiveness, and ease of availability. The reversible solid-liquid phase transition of PCM is responsible to hold firm or actively release the encapsulated drug. The eutectic mixtures of fatty acids (stearic acid and myristic acid) along with liquid lipid (oleic acid) were prepared to exhibit a tunable thermoresponsive platform. Doxorubicin-loaded lipid nanocarriers were successfully developed with combined hot melt encapsulation (HME) and sonication method and characterized to achieve enhanced permeability and retention (EPR) effect-based solid tumor targeting in response to exogenous temperature stimulus. The cytotoxicity against melanoma cell lines and in vivo safety studies in albino rats was also carried out.

Results

Doxorubicin-loaded lipid nanocarriers have a narrow size distribution (94.59-219.3 nm), and a PDI (0.160-0.479) as demonstrated by photon correlation microscopy and excellent colloidal stability (Z.P value: -22.7 to -32.0) was developed. Transmission electron microscopy revealed their spherical morphology and characteristics of a monodispersed system. A biphasic drug release pattern with a triggered drug release at 41°C and 43°C and a sustained drug release was observed at 37°C. The thermoresponsive cytotoxic potential was demonstrated in B16F10 cancer cell lines. Hemolysis assay and acute toxicity studies with drug-free and doxorubicin lipid nanocarrier formulations provided evidence for their non-toxic nature.

Conclusion

We have successfully developed a temperature-responsive tunable platform with excellent biocompatibility and intelligent drug release potential. The formulation components being from natural sources present superior characteristics in terms of cost, compatibility with normal body cells, and adaptability to preparation methods. The reported preparation method is adapted to avoid complex chemical processes and the use of organic solvents. The lipid nanocarriers with tunable thermoresponsive characteristics are promising biocompatible drug delivery systems for improved localized delivery of chemotherapeutic agents.

Ion-pair compounds of diacerein for enhancing skin permeability in vitro: the compatibility-permeability relationship of counter ion and diacerein

This research aimed to investigate how the relationship between counter ion and diacerein (DCN) exerts an effect on the skin penetration of DCN ion-pair compounds. After the ion-pair compounds were formed by DCN and organic amines with different functional groups, the hydrogen bond of these compounds was confirmed by Fourier-transform infrared (FTIR) spectroscopy and molecular docking. The skin of porcine ears was employed to conduct the in vitro skin penetration, DCN - triethanolamine was the most potential candidate with the Q_24h of 7.89 ± 0.38 µg/cm² among organic amines with different functional groups. Whereas among the homologous fatty amine, the most permeable compound was DCN - lauryl amine with the Q_24h of 11.28 ± 0.48 µg/cm². Molecular simulation was employed to explore the relationship between counter ion and DCN. It was revealed by the bind energy curve that DCN had the strongest compatibility with triethanolamine among organic amines and laurylamine (N₁₂) among fatty amines. It was amazingly found that the in vitro permeation fluxes of DCN ion-pair compounds would increase with enhancing the compatibility of counter ion and DCN. These findings broadened our understanding of how the relationship between drug and counter ion affects the skin penetration of ion-pair compounds.

Solid lipid nanoparticles loaded with curcumin: development and in vitro toxicity against CT26 cells

Aim: To develop a new curcumin carrier consisting of murumuru butter nanoparticles (SLN-Cs). Methods: A phase-inversion temperature method was used to produce SLN-Cs. The interaction of SLN-Cs with murine colon adenocarcinoma (CT26) cells in vitro was analyzed by confocal microscopy. Results: Stable SLN-Cs with a high curcumin-loading capacity were obtained. The SLN-Cs were more toxic to CT26 than free curcumin. Fluorescence microscopy images showed the SLN-Cs to be taken up by CT26 cells in vitro. Conclusion: These results indicate that SLN-Cs are suitable carriers of curcumin in aqueous media.

Targeted treatment for osteoarthritis: drugs and delivery system

The management of osteoarthritis (OA) is a clinical challenge due to the particular avascular, dense, and occluded tissue structure. Despite numerous clinical reports and animal studies, the pathogenesis and progression of OA are still not fully understood. On the basis of traditional drugs, a large number of new drugs have been continuously developed. Intra-articular (IA) administration for OA hastens the development of targeted drug delivery systems (DDS). OA drugs modification and the synthesis of bioadaptive carriers contribute to a qualitative leap in the efficacy of IA treatment. Nanoparticles (NPs) are demonstrated credible improvement of drug penetration and retention in OA. Targeted nanomaterial delivery systems show the prominent biocompatibility and drug loading-release ability. This article reviews different drugs and nanomaterial delivery systems for IA treatment of OA, in an attempt to resolve the inconsonance between in vitro and in vivo release, and explore more interactions between drugs and nanocarriers, so as to open up new horizons for the treatment of OA.

Raloxifene-loaded SLNs with enhanced biopharmaceutical potential: QbD-steered development, in vitro evaluation, in vivo pharmacokinetics, and IVIVC

Raloxifene hydrochloride, a second-generation selective estrogen receptor modulator, has been approved for the management of breast cancer. However, it is known to exhibit poor (~ 2%) and inconsistent oral bioavailability in humans, primarily ascribable to its low aqueous solubility, extensive first-pass metabolism, P-gp efflux, and presystemic glucuronide conjugation. The present research work entails the systematic development and evaluation of SLNs of RLX for its enhanced biopharmaceutical performance against breast cancer. Factor screening studies were conducted using Taguchi design, followed by optimization studies employing Box-Behnken design. Preparation of SLNs was carried out using glyceryl monostearate and Compritol® 888 ATO (i.e., lipid), Phospholipid S-100 (i.e., co-surfactant), and TPGS-1000 (i.e., surfactant) employing solvent diffusion method. The optimized formulation was evaluated for zeta potential, average particle size, field emission scanning electron microscope, transmission electron microscopy, and in vitro release study. Further, MCF-7 cells (cell cytotoxicity assay, apoptosis assay, and reactive oxygen species assay) and Caco-2 cells (cell uptake studies and P-gp efflux assay) were employed to evaluate the in vitro anticancer potential of the developed optimized formulation. In vivo pharmacokinetic studies were conducted in Sprague-Dawley rats to evaluate the therapeutic profile of the developed formulation. The optimized SLN formulations exhibited a mean particle size of 109.7 nm, PDI 0.289 with a zeta potential of - 13.7 mV. In vitro drug dissolution studies showed Fickian release, with release exponent of 0.137. Cell cytotoxicity assay, apoptosis assay, and cellular uptake indicated 6.40-, 5.40-, and 3.18-fold improvement in the efficacy of RLX-SLNs vis-à-vis pure RLX. Besides, the pharmacokinetic studies indicated quite significantly improved biopharmaceutical performance of RLX-SLNs vis-à-vis pure drug, with 4.06-fold improvement in C_max, 4.40-fold in AUC_(0-72 h), 4.56-fold in AUC_(0-∞), 1.53-fold in K_a, 2.12-fold in t_1/2, and 1.22-fold in T_max. Further, for RLX-SLNs and pure drug, high degree of level A linear correlation was established between fractions of drug dissolved (in vitro) and of drug absorbed (in vivo) at the corresponding time-points. Stability studies indicated the robustness of RLX-SLNs when stored at for 3 months. Results obtained from the different studies construe promising the anticancer potential of the developed RLX-SLNs, thereby ratifying the lipidic nanocarriers as an efficient drug delivery strategy for improving the biopharmaceutical attributes of RLX.

Nanomagnetic Actuation of Hybrid Stents for Hyperthermia Treatment of Hollow Organ Tumors

This paper describes a magnetic nanotechnology that locally enables hyperthermia treatment of hollow organ tumors by using polymer hybrid stents with incorporated magnetic nanoparticles (MNP). The hybrid stents are implanted and activated in an alternating magnetic field to generate therapeutically effective heat, thereby destroying the tumor. Here, we demonstrate the feasibility of nanomagnetic actuation of three prototype hybrid stents for hyperthermia treatment of hollow organ tumors. The results show that the heating efficiency of stent filaments increases with frequency from approximately 60 W/g_Fe (95 kHz) to approximately 250 W/g_Fe (270 kHz). The same trend is observed for the variation of magnetic field amplitude; however, heating efficiency saturates at approximately 30 kA/m. MNP immobilization strongly influences heating efficiency showing a relative difference in heating output of up to 60% compared to that of freely dispersed MNP. The stents showed uniformly distributed heat on their surface reaching therapeutically effective temperatures of 43 °C and were tested in an explanted pig bile duct for their biological safety. Nanomagnetic actuation of hybrid stents opens new possibilities in cancer treatment of hollow organ tumors.

Cyclosporine CsA—The Physicochemical Characterization of Liposomal and Colloidal Systems

This paper presents an overview of the possibilities of testing various cyclosporine (CsA) formulations with an emphasis on parameters that may be key to improving the stability and biocompatibility. The feasibility of CsA colloidal systems for oral (injection) administration were investigated using different techniques and compared with similar investigations of other researchers. The chosen CsA systems were developed using dipalmitoylphosphocholine (DPPC) and/or cholesterol as a lipid matrix, stabilized with ethanol, with soybean oil or n-tetradecane as oil phase in emulsions, under natural pH, room and physiological temperature. Their integrity was found to be strictly dependent on the stabilizers. The highest CsA penetrability with the system containing phospholipid in the context of its interactions with lipid membranes was shown. Also, the bioavailability of CsA can be enhanced with the biopolymer antibacterial chitosan. This mini-review suggests the suitability of liposome/microemulsion as promising vehicles for CsA delivery. The most hopeful proved to be formulation with the smaller particle size facilitating absorption, but when safety is assessed, relying on just the particle size cannot be the only criteria. Reassumed, the CsA formulation stability known on the basis of the size and zeta potential measurements guarantees a decrease of the individual variations in the drug bioavailability, toxicity and minimizes rejection.

Nanotechnological Strategies for Osteoarthritis Diagnosis, Monitoring, Clinical Management, and Regenerative Medicine: Recent Advances and Future Opportunities

PURPOSE OF REVIEW

In this review article, we discuss the potential for employing nanotechnological strategies for the diagnosis, monitoring, and clinical management of osteoarthritis (OA) and explore how nanotechnology is being integrated rapidly into regenerative medicine for OA and related osteoarticular disorders.

RECENT FINDINGS

We review recent advances in this rapidly emerging field and discuss future opportunities for innovations in enhanced diagnosis, prognosis, and treatment of OA and other osteoarticular disorders, the smart delivery of drugs and biological agents, and the development of biomimetic regenerative platforms to support cell and gene therapies for arresting OA and promoting cartilage and bone repair. Nanotubes, magnetic nanoparticles, and other nanotechnology-based drug and gene delivery systems may be used for targeting molecular pathways and pathogenic mechanisms involved in OA development. Nanocomposites are also being explored as potential tools for promoting cartilage repair. Nanotechnology platforms may be combined with cell, gene, and biological therapies for the development of a new generation of future OA therapeutics. Graphical Abstract.

Improving the Oral Bioavailability of an Anti-Glioma Prodrug CAT3 Using Novel Solid Lipid Nanoparticles Containing Oleic Acid-CAT3 Conjugates

13a-(S)-3-pivaloyloxyl-6,7-dimethoxyphenanthro(9,10-b)-indolizidine (CAT3) is a novel oral anti-glioma pro-drug with a potent anti-tumor effect against temozolomide-resistant glioma in vivo. However, poor lipid solubility has limited the encapsulation efficacy during formulation development. Moreover, although the active metabolite of CAT3, 13a(S)-3-hydroxyl-6,7-dimethoxyphenanthro(9,10-b)-indolizidine (PF403), can penetrate the blood-brain barrier and approach the brain tissue with a 1000-fold higher anti-glioma activity than CAT3 in vitro, its bioavailability and Cmax were considerably low in plasma, limiting the anti-tumor efficacy. In this study, a novel oleic acid-CAT3 conjugate (OA-CAT3) was synthesized at the first time to increase the lipid solubility of CAT3. The OA-CAT3 loaded solid lipid nanoparticles (OA-CAT3-SLN) were constructed using an ultrasonic technique to enhance the bioavailability and Cmax of PF403 in plasma. Our results demonstrated that CAT3 was amorphous in the lipid core of OA-CAT3-SLN and the in vitro release was well controlled. Furthermore, the encapsulation efficacy and the zeta potential increased to 80.65 ± 6.79% and -26.7 ± 0.46 mV, respectively, compared to the normal CAT3 loaded SLN. As indicated by the high-performance liquid chromatography-mass spectrometry (HPLC-MS/MS) quantitation, the monolayer cellular transepithelial transport rate of OA-CAT3-SLN improved by 2.42-fold relied on cholesterol compared to the CAT3 suspension. Hence, the in vitro cell viability of OA-CAT3-SLN in C6 glioma cells decreased to 29.77% ± 2.13% and 10.75% ± 3.12% at 48 and 72 h, respectively. Finally, compared to the CAT3 suspension, the in vivo pharmacokinetics in rats indicated that the plasma bioavailability and Cmax of PF403 as afforded by OA-CAT3-SLN increased by 1.7- and 5.5-fold, respectively. Overall, the results indicate that OA-CAT3-SLN could be an efficacious delivery system in the treatment of glioma.

Development and characterization of oxaceprol-loaded poly-lactide-co-glycolide nanoparticles for the treatment of osteoarthritis

Oxaceprol is well-defined therapeutic agent as an atypical inhibitor of inflammation in osteoarthritis. In the present study, we aimed to develop and characterize oxaceprol-loaded poly-lactide-co-glycolide (PLGA) nanoparticles for intra-articular administration in osteoarthritis. PLGA nanoparticles were prepared by double-emulsion solvent evaporation method. Meanwhile, a straightforward and generally applicable high performance liquid chromatography method was developed, and validated for the first time for the quantification of oxaceprol. To examine the drug carrying capacity of nanoparticles, varying amount of oxaceprol was entrapped into a constant amount of polymer matrix. Moreover, the efficacy of drug amount on nanoparticle characteristics such as particle size, zeta potential, morphology, drug entrapment, and in vitro drug release was investigated. Nanoparticle sizes were between 229 and 509 nm for different amount of oxaceprol with spherical smooth morphology. Encapsulation efficiency ranged between 39.73 and 63.83% by decreasing oxaceprol amount. The results of Fourier transform infrared and DSC showed absence of interaction between oxaceprol and PLGA. The in vitro drug release from these nanoparticles showed a sustained release of oxaceprol over 30 days. According to cell culture studies, oxaceprol-loaded nanoparticles had no cytotoxicity with high biocompatibility. This study was the first step of developing an intra-articular system in the treatment of osteoarthritis for the controlled release of oxaceprol. Our findings showed that these nanoparticles can be beneficial for an effective treatment of osteoarthritis avoiding side effects associated with oral administration.

Therapy for myocardial infarction: In vitro and in vivo evaluation of puerarin-prodrug and tanshinone co-loaded lipid nanoparticulate system

Myocardial infarction (MI) is the leading cause of morbidity and mortality worldwide. Nanoparticle systems carrying drugs have already been developed to treat MI. To improve the efficiency of tanshinone (TAN), and to achieve the synergistic effect of TAN and puerarin (PUE), PUE-prodrug and TAN co-loaded solid lipid nanoparticles (SLN) was structured and utilized for MI treatment in the present research. PUE-prodrug was synthesized by an esterification reaction. PUE-prodrug and TAN co-loaded SLN (PUEp/TAN-SLN) were prepared by a single emulsification followed by a solvent evaporation method. The physicochemical properties of SLN were characterized and the in vivo infarct therapy effects were evaluated in MI rats. PUE-prodrug and TAN contained SLN showed a size of 112.6 ± 3.1 nm. The SLN encapsulation reduced the cytotoxicity of drugs and was a safer system. PUEp-SLN exhibited a 1.7-fold increase in comparison to PUE-SLN (21.2 ± 2.1 versus 12.5 ± 1.5 mg/L), in the mean time a 3.4-fold increase compared with free PUE in heart drug concentration (21.2 ± 2.1 versus 6.3 ± 0.9 mg/L). In vivo infarct therapy efficiency of double drugs loaded PUEp/TAN-SLN (17 ± 1.9%) was significantly better than the single drug loaded PUEp-SLN (31 ± 1.6%) and TAN-SLN (40 ± 2.2%). PUE-prodrug contained, double drugs co-loaded SLN can be utilized as promising candidate delivery system for cardioprotective drugs in treatment of myocardial infarction.

Improved Dermal Delivery of Cyclosporine A Loaded in Solid Lipid Nanoparticles

Cyclosporine A (CsA) is an immunosuppressant frequently used in the therapy of autoimmune disorders, including skin-related diseases. Aiming towards topical delivery, CsA was successfully incorporated into lipid nanoparticles of Lipocire DM and Pluronic F-127 using the hot homogenization method. Two different nanocarriers were optimized: solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) where oleic acid was the liquid lipid. The developed nanoparticles showed mean sizes around 200 nm, a negative surface charge, and drug entrapment efficiencies around 85% and 70% for SLNs and NLCs, respectively. The spherical CsA-loaded lipid nanoparticles were stable for 9 weeks when stored at room temperature, and exhibited in vitro pH-dependent release under skin mimetic conditions, following the Peppas-Korsmeyer model. CsA, when loaded in SLNs, was safe to be used up to 140 μg mL-1 in fibroblasts and keratinocytes, while CsA-loaded NLCs and free drug exhibited IC50 values of 55 and 95 μg mL-1 (fibroblasts) and 28 and 30 μg mL-1 (keratinocytes), respectively. The developed SLNs were able to retain the drug in pork skin with a reduced permeation rate in relation to NLCs. These findings suggest that SLNs are a potential alternative to produce stable and safe CsA nanocarriers for topical administration.

An Ex Vivo Evaluation of Moxifloxacin Nanostructured Lipid Carrier Enriched In Situ Gel for Transcorneal Permeation on Goat Cornea

The study was designed to fabricate the moxifloxacin nanostructured lipid carriers (MOX-NLCs) loaded in situ gel for opthalmic application to improve the corneal permeation and retention and also subside the toxic effect associated with intracameral injection of moxifloxacin in endophthalmitis treatment. Initially, Box-Behnken design was used to optimize the various factors significantly affecting the final formulation attributes. MOX-NLCs with particle size 232.1 ± 9.2 nm, polydispersity index 0.247 ± 0.031, zeta potential -16.3 ± 1.6 mV, entrapment efficiency 63.1 ± 2.4%, and spherical shape was achieved. The optimized MOX-NLCs demonstrated the Higuchi release kinetics with highest regression coefficient. Besides this, FTIR, differential scanning calorimetry, and X-ray diffraction results suggested that MOX had excellent compatibility with excipients. Furthermore, the results of ex-vivo permeation study demonstrated 2-fold higher permeation (208.7 ± 17.6 μg), retention (37.26 ± 2.83 μg), and flux (9.57 ± 0.73 μg/cm² h) compared with free MOX in situ gel. In addition, MOX-NLCs exhibited normal corneal hydration and did not show any sign of structural damage to the corneal tissue as confirmed by histology. Therefore, the findings strongly suggest that MOX-NLCs in situ gel with higher permeation and retention can be a better alternative strategy to prevent and treat the endophthalmitis infection.

Enhancement of In Vivo Efficacy and Oral Bioavailability of Aripiprazole with Solid Lipid Nanoparticles

Aripiprazole (ARP), a second-generation or atypical antipsychotic, is poorly soluble and undergoes extensive hepatic metabolism and P-glycoprotein efflux which lead to reduced in vivo efficacy and increased dose-related side effects. To enhance in vivo efficacy and oral bioavailability of aripiprazole, aripiprazole-loaded solid lipid nanoparticles (SLNs) were developed using tristearin as solid lipid. Tween 80 and sodium taurocholate were used as surfactants to prepare SLNs using microemulsification method. SLNs were characterized for particle size, zeta potential, entrapment efficiency, and crystallinity of lipid and drug. In vitro release studies were performed in water containing 0.5% sodium dodecyl sulfate. Pharmacodynamic evaluation was carried out in laca mice using dizocilpine-induced schizophrenic model where behavioral evaluation revealed better in vivo efficacy of SLNs. Pharmacokinetics of aripiprazole-loaded SLNs after oral administration to conscious male Wistar rats was studied. Bioavailability of aripiprazole was increased 1.6-fold after formulation of aripiprazole into SLNs as compared to plain drug suspension. The results indicated that solid lipid nanoparticles can improve the bioavailability of lipophilic drugs like aripiprazole by enhancement of absorption and minimizing first-pass metabolism.

Solid lipid nanoparticles for thermoresponsive targeting: evidence from spectrophotometry, electrochemical, and cytotoxicity studies

Thermoresponsive drug delivery systems are designed for the controlled and targeted release of therapeutic payload. These systems exploit hyperthermic temperatures (>39°C), which may be applied by some external means or due to an encountered symptom in inflammatory diseases such as cancer and arthritis. The objective of this paper was to provide some solid evidence in support of the hypothesis that solid lipid nanoparticles (SLNs) can be used for thermoresponsive targeting by undergoing solid–liquid phase transition at their melting point (MP). Thermoresponsive lipid mixtures were prepared by mixing solid and liquid natural fatty acids, and their MP was measured by differential scanning calorimetry (DSC). SLNs (MP 39°C) containing 5-fluorouracil (5-FU) were synthesized by hot melt encapsulation method, and were found to have spherical shape (transmission electron microscopy studies), desirable size (<200 nm), and enhanced physicochemical stability (Fourier transform infrared spectroscopy analysis). We observed a sustained release pattern (22%–34%) at 37°C (5 hours). On the other hand, >90% drug was released at 39°C after 5 hours, suggesting that the SLNs show thermoresponsive drug release, thus confirming our hypothesis. Drug release from SLNs at 39°C was similar to oleic acid and linoleic acid nanoemulsions used in this study, which further confirmed that thermoresponsive drug release is due to solid–liquid phase transition. Next, a differential pulse voltammetry-based electrochemical chemical detection method was developed for quick and real-time analysis of 5-FU release, which also confirmed thermoresponsive drug release behavior of SLNs. Blank SLNs were found to be biocompatible with human gingival fibroblast cells, although 5-FU-loaded SLNs showed some cytotoxicity after 24 hours. 5-FU-loaded SLNs showed thermoresponsive cytotoxicity to breast cancer cells (MDA-MB-231) as cytotoxicity was higher at 39°C (cell viability 72%–78%) compared to 37°C (cell viability >90%) within 1 hour. In conclusion, this study presents SLNs as a safe, simple, and effective platform for thermoresponsive targeting.

Fabrication of Niclosamide loaded solid lipid nanoparticles: in vitro characterization and comparative in vivo evaluation

Niclosamide (NCS) is an oral anthelminthic drug having low solubility and hence low bioavailability. Current investigation shows an approach to fabricate solid lipid nanoparticles (SLNs) of NCS and evaluated for pharmaceutical, in vitro and in vivo characterization. NFM-3 showed particle size 204.2 ± 2.2 nm, polydispersity index 0.328 ± 0.02 and zeta potential -33.16 ± 2 mV. Entrapment efficiency and drug loading capacity were 84.4 ± 0.02% and 5.27 ± 0.03%, respectively. Scanning electron microscopy image indicated that particles were nanoranged. DSC and P-XRD results showed change in physicochemical properties of NCS. FT-IR spectra confirmed compatibility between NCS and excipients. The drug release profile showed sustained release (93.21%) of NCS in 12 h. Different kinetic models showed zero-order kinetics and Case-II transport mechanism. Study showed maximum stability at refrigerated temperature. In vivo pharmacokinetic study showed 2.15-fold increase in NCS peak plasma concentration as solid lipid nanoparticle formulation (NFM-3) compared to commercial product while relative bioavailability was 11.08. Results including in vitro and in vivo release studies of NCS confirmed that SLNs system is suitable to improve oral delivery of NCS with increased aqueous solubility, permeability and finally bioavailability.

Enhanced blood brain barrier permeability and glioblastoma cell targeting via thermoresponsive lipid nanoparticles

Thermoresponsive targeting is used to deliver therapeutic agents at hyperthermic conditions (39-45 °C). However, available thermoresponsive drug delivery systems (TDDS), including liposomes, have a complex method of preparation involving toxic solvents and reagents. The objective of this in vitro study was to prepare and characterize thermoresponsive lipid nanoparticles (TLN) for treating glioblastoma, the most aggressive brain tumor whose treatment is limited by a low blood brain barrier (BBB) permeability of drugs. Thermoresponsive lipids were prepared by mixing liquid and solid fatty acids (0.1 : 1 to 2 : 1 ratio) and lipid mixtures exhibiting a solid-liquid phase transition at 39 °C were identified by plotting melting point against liquid contents. TLN were prepared by a hot melt encapsulation method using mono- or double-surfactant systems. TLN showed desirable size (<270 nm), zeta potential (-35 to -50 mV), spherical morphology and stability by FTIR studies. In the drug release studies, paclitaxel release was slow at 37 °C, however, it was released abruptly at 39 °C due to the faster diffusion rate from liquid state nanoparticles. During cytotoxicity studies, the unloaded TLN were non-toxic whereas paclitaxel loaded TLN showed higher cytotoxicity to glioblastoma cells at 39 °C (69% cell viability after one hour) compared to 37 °C (82% cell viability). The TLN showed higher permeability across an in vitro model of BBB at 39 °C due to a deformable liquid state which can squeeze through the tight junctions of the BBB. In conclusion, this study demonstrated that the TLN can be used as a safe and effective alternative to traditional TDDS with higher potential to target glioblastoma cells across the BBB.

Topical co-delivery of methotrexate and etanercept using lipid nanoparticles: A targeted approach for psoriasis management

Methotrexate is indicated in psoriasis systemic therapy and its topical administration may be an option to overcome several side effects. A targeted delivery may be achieved through etanercept. Thus, a combination targeted therapy using methotrexate and etanercept could bring new perspectives for psoriasis patients. This work intended to develop and characterize co-delivery of methotrexate and etanercept using lipid nanoparticles, mediated by a carbopol hydrogel and to evaluate their potential for delivering the drug into the skin with reduced transdermal permeation. The nanoparticles were physico-chemically characterized. In vitro methotrexate release from solid lipid nanoparticles revealed a sustained release for 8h. The solid lipid nanoparticles were non-toxic towards human keratinocytes and fibroblasts. Permeation studies using pig ear as model revealed enhanced skin deposition of the applied methotrexate when incorporated within solid lipid nanoparticles in relation to free drug. Therapeutic amounts of methotrexate were delivered to psoriatic human skin after application of solid lipid nanoparticles, with reduced transdermal permeation.

Chitosan-coated diacerein nanosuspensions as a platform for enhancing bioavailability and lowering side effects: preparation, characterization, and ex vivo/in vivo evaluation

Nanodrug delivery systems have been widely reviewed for their use in several drug formulations to improve bioavailability, sustain effect, and decrease side effects of many candidate drugs. The objective of this study was to evaluate the potential of chitosan (CS)-coated nanosuspensions to enhance bioavailability and reduce the diarrheal side effect of diacerein (DCN) after oral administration. DCN nanosuspensions (DNS) were prepared by sonoprecipitation technique using different stabilizers at three different concentrations. The selected DNS with optimum particle size (PS), polydispersity index (PDI), and Zeta potential (ZP) was coated with three different concentrations of CS-coated DNS (CS-DNS) and screened. In vitro dissolution was performed for the selected lyophilized formulae and compared with DCN powder in addition to the assessment of drug crystallinity via scanning electron microscopy, X-ray powder diffraction, and differential scanning calorimetry. Ex vivo drug permeability using noneverted rat intestine, intraluminal content, and mucoadhesion evaluation was studied for nominated formulae in comparison to DCN suspension. Moreover, in vivo study, pharmacokinetic parameters, and evaluation of diarrheal potential were conducted after oral administration of selected formulae. Polyvinyl pyrrolidone (PVP)-stabilized DNS showed a significant increase (P≤0.05) in PS and PDI as the stabilizer concentration increased. PVP-stabilized DNS with the lowest CS concentration was protected from aggregation by lyophilization with mannitol. A remarked enhancement in dissolution parameters was observed in the nanocrystals’ formulae. Morphological examination and X-ray diffraction confirmed drug crystallinity. The intermediate permeation parameters of CS-DNS-F10, lowest rhein-to-DCN ratio in intraluminal content along with the highest percentage of mucoadhesive, could serve as a sustaining profile of coated formula. CS-DNS-F10 showed a significantly higher C_max of 0.74±0.15 µg/mL at a delayed T_max of 3.60±0.55 hours with a relative bioavailability of 172.1% compared to DCN suspension. CS-coated nanosuspensions could serve as promising revenue to enhance bioavailability and reduce the diarrheal side effect of DCN after oral administration.

Ultrasonic Processing Technique as a Green Preparation Approach for Diacerein-Loaded Niosomes

In this study, the feasibility of ultrasonic processing (UP) technique as green preparation method for production of poorly soluble model drug substance, diacerein, loaded niosomes was demonstrated. Also, the effects of different surfactant systems on niosomes' characteristics were analyzed. Niosomes were prepared using both the green UP technique and traditional thin-film hydration (TFH) technique, which requires the use of environmentally hazardous organic solvents. The studied surfactant systems were Span 20, Pluronic L64, and their mixture (Span 20 and Pluronic L64). Both the production techniques produced well-defined spherical vesicles, but the UP technique produced smaller and more monodisperse niosomes than TFH. The entrapment efficiencies with the UP method were lower than with TFH, but still at a feasible level. All the niosomal formulations released diacerein faster than pure drug, and the drug release rates from the niosomes produced by the UP method were higher than those from the TFH-produced niosomes. With UP technique, the optimum process conditions for small niosomal products with low PDI values and high entrapment efficiencies were obtained when 70% amplitude and 45-min sonication time were used. The overall results demonstrated the potency of UP technique as an alternative fast, cost-effective, and green preparation approach for production of niosomes, which can be utilized as drug carrier systems for poorly soluble drug materials.

Can self-assembled hydrogels composed of aromatic amino acid derivatives function as drug delivery carriers?

This work reflects the efficient candidature of the hydrogelators and nanoparticles generated therefrom as excellent carriers for drug delivery.

Somatostatin receptor targeted liposomes with Diacerein inhibit IL-6 for breast cancer therapy

Selective targeting to the tumor niche remains a major challenge in successful cancer therapy. Somatostatin receptor 2 (SSTR2) is overexpressed in breast cancer cells thus making this receptor an attractive target for selective guidance of ligand-conjugated drug liposomes to the tumor site. In this study, a synthetic somatostatin analogue (SST) was used as SSTR2 targeting agent and Diacerein was employed as therapeutic molecule. Diacerein loaded liposomes (DNL) were prepared and they were further decorated with the synthetic and stable analogue of somatostatin (SST-DNL). Fabricated liposomes were nano-size in range and biocompatible. SST-DNL displayed significantly better anti-tumor efficacy as compared to free Diacerein (DN) and DNL in breast cancer models. Enhanced apoptosis in breast cancer cells was detected in SST-DNL treated groups as monitored by cell cycle analysis and changes in expression level of apoptotic/anti-apoptotic proteins Bcl-2, Bax, cleaved Caspase 3 and PARP. SST-DNL more effectively inhibited the oncogenic IL-6/IL-6R/STAT3/MAPK/Akt signalling pathways as compared to DN or DNL in cancer cells. In addition, SST-DNL effectively suppressed angiogenesis and cancer cell invasion. In vivo tumor growth in a MDA-MB-231 mouse xenograft model was significantly suppressed following SST-DNL treatment. In xenograft model, immunohistochemistry of Ki-67 and CD-31 indicated that SST-DNL improved the anti-proliferative and anti-angiogenic impacts of Diacerein. In vivo pharmacokinetic studies in rats showed enhanced circulation time in the DNL or SST-DNL treated groups as compared to free DN. Considering all of these findings, we conclude that SST-DNL provides a novel strategy with better efficacy for breast cancer therapy.