Functional diversity and dynamics of bacterial communities in a membrane bioreactor for the treatment of metal-working fluid wastewater

Uptake of potentially toxic elements and polycyclic aromatic hydrocarbons from the hydromorphic soil and their cellular effects on the Phragmites australis

The current study provides an information on the combined effect of pollution with potentially toxic elements (PTEs) and polycyclic aromatic hydrocarbons (PAHs) in hydromorphic soils on the accumulation, growth, functional and morphological-anatomical changes of macrophyte plant, i.e., Phragmites australis Cav., as well as information about their bioindication status on the example of small rivers of the Azov basin. The territory of the lower reaches of the Kagalnik River is one of the small rivers of the Eastern Azov region was examined with different levels of PTEs contamination in soils, where the excess of the lithosphere clarkes and maximum permissible concentrations (MPC) for Mn, Cr, Zn, Pb, Cu, and Cd were found. The features of the 16 priority PAHs quantitative and qualitative composition in hydromorphic soils and P. australis were revealed. The influence of soil pollution on accumulation in P. australis, as well as changes in the morphological parameters were shown. It has been observed that morphometric changes in P. australis at sites experiencing the сontamination and salinity are reflected with the changes in the ultrastructure of plastids, mitochondria, and EPR elements of plant cells. PTEs accumulated in inactive organs and damaged cell structures. At the same time, PAHs penetrated through the biomembranes and violated their integrity, increased permeability, resulted cell disorganization, meristem, and conductive tissues of roots. The nature and extent of the structural alterations found are dependent on the type and extent of pollution in the examined regions and can be utilized as bioindicators for evaluating the degree of soil phytotoxicity characterized by the accumulation of PTE and PAHs.

Effects of benzo[a]pyrene toxicity on morphology and ultrastructure of Hordeum sativum

Many studies have been devoted to investigation of toxic benzo(a)pyrene (BaP) compound, but studies involving changes at the cellular level are insufficient to understand the mechanisms of polycyclic aromatic hydrocarbons (PAHs) effect on plants. To study the toxicity of BaP, a model vegetation experiment was conducted on cultivation of spring barley (Hordeum sativum distichum) on artificially polluted BaP soil at different concentrations. The article discusses the intake of BaP from the soil into the plant and its effect on the organismic and cellular levels of plant organization. The BaP content in the organs of spring barley was determined by the method of saponification. With an increase in the concentration of BaP in the soil, its content in plants also rises, which leads to inhibition of growth processes. The BaP content in the green part of Hordeum sativum increased from 0.3 µg kg^-1 in control soil up to 2.6 µg kg^-1 and 16.8 µg kg^-1 under 20 and 400 ng/g BaP applying in soil, as well as in roots: 0.9 µg kg^-1, 7.7 µg kg^-1, 42.8 µg kg^-1, respectively. Using light and electron microscopy, changes in the tissues and cells of plants were found and it was established that accumulation of BaP in plant tissues caused varying degrees of ultrastructural damage depending on the concentration of pollutant. BaP had the greatest effect on the root, significant changes were found in it both at histological and cytological levels, while changes in the leaves were observed only at the cytological level. The results provide significant information about the mechanism of action of BaP on agricultural plants.

Diversity and function of the microbial community under strong selective pressure of rotifers

We unearthed some interesting microecological discoveries while selecting for the most beneficial bacterial strains to be used as probiotics in Lecane inermis rotifer mass culture. For 3 years, we maintained the cultures of L. inermis, with selection for the highest growth rate and resistance to potential contamination. Then, we conducted further selection and isolation in two groups: rotifers inoculated with the bacterial consortium isolated from the rotifer cultures, and rotifers fed with a commercial bioproduct. Selection was conducted in demanding conditions, with particulate matter suspended in spring water as a substrate, without aeration and under strong consumer pressure, and led to selection of two cultivable strains isolated from the optimal rotifers culture. According to molecular analysis, these strains were Aeromonas veronii and Pseudomonas mosselii. Biolog® ECO plate tests showed that both investigated bacterial communities metabolized wide but similar range of substrates. Therefore, intensely selective conditions led to considerable reduction in bacterial community regarding taxonomy, but not in metabolic activity, showing a functional composition decoupling. Aside from this result, our novel selection method dedicated to the sustainable culture of two trophic levels, a directed selection procedure (DSC), could potentially lead to the development of biotechnologically valuable strains with high metabolic activity and the ability to metabolize different sorts of substrate without harmful impact on higher trophic levels.

Metagenomic and Resistome Analysis of a Full-Scale Municipal Wastewater Treatment Plant in Singapore Containing Membrane Bioreactors

Reclaimed water provides a water supply alternative to address problems of scarcity in urbanized cities with high living densities and limited natural water resources. In this study, wastewater metagenomes from 6 stages of a wastewater treatment plant (WWTP) integrating conventional and membrane bioreactor (MBR) treatment were evaluated for diversity of antibiotic resistance genes (ARGs) and bacteria, and relative abundance of class 1 integron integrases (intl1). ARGs confering resistance to 12 classes of antibiotics (ARG types) persisted through the treatment stages, which included genes that confer resistance to aminoglycoside [aadA, aph(6)-I, aph(3')-I, aac(6')-I, aac(6')-II, ant(2″)-I], beta-lactams [class A, class C, class D beta-lactamases (bla OXA)], chloramphenicol (acetyltransferase, exporters, floR, cmIA), fosmidomycin (rosAB), macrolide-lincosamide-streptogramin (macAB, ereA, ermFB), multidrug resistance (subunits of transporters), polymyxin (arnA), quinolone (qnrS), rifamycin (arr), sulfonamide (sul1, sul2), and tetracycline (tetM, tetG, tetE, tet36, tet39, tetR, tet43, tetQ, tetX). Although the ARG subtypes in sludge and MBR effluents reduced in diversity relative to the influent, clinically relevant beta lactamases (i.e., bla KPC, bla OXA) were detected, casting light on other potential point sources of ARG dissemination within the wastewater treatment process. To gain a deeper insight into the types of bacteria that may survive the MBR removal process, genome bins were recovered from metagenomic data of MBR effluents. A total of 101 close to complete draft genomes were assembled and annotated to reveal a variety of bacteria bearing metal resistance genes and ARGs in the MBR effluent. Three bins in particular were affiliated to Mycobacterium smegmatis, Acinetobacter Iwoffii, and Flavobacterium psychrophila, and carried aquired ARGs aac(2')-Ib, bla OXA-278, and tet36 respectively. In terms of indicator organisms, cumulative log removal values (LRV) of Escherichia coli, Enterococci, and P. aeruginosa from influent to conventional treated effluent was lower (0-2.4), compared to MBR effluent (5.3-7.4). We conclude that MBR is an effective treatment method for reducing fecal indicators and ARGs; however, incomplete removal of P. aeruginosa in MBR treated effluents (<8 MPN/100 mL) and the presence of ARGs and intl1 underscores the need to establish if further treatment should be applied prior to reuse.

Performance and bacterial diversity of biotrickling filters filled with conductive packing material for the treatment of toluene

Toluene has high toxicity and mutagenicity, thus, the removal of toluene from air is necessary. In this study, two biotrickling filters (BTFs) were constructed and packed with conductive packing material to treat toluene waste gas. BTF-O exhibited good toluene removal performance even under high toluene inlet concentration, and over 80% of removal efficiency was observed. The elimination capacity reached 120.1 g/m³ h corresponding to an inlet concentration of 2.259 g/m³ under 61.5 s of empty bed retention time. During toluene biodegradation, the output voltage was observed in BTF-O and BTF-E, moreover BTF-E also showed slight power storage capacity. The applied voltage inhibited toluene removal and affected the bacterial community. The predominant bacterial genera in BTF-O were Acidovorax, Rhodococcus, Hydrogenophaga, Brevundimonas, Arthrobacter, Pseudoxanthomonas, Devosia, Gemmobacter, Rhizobium, Dokdonella and Pseudomonas. Genera Xanthobacter and Pelomonas accounted for the main bacterial community in BTF-E.

Removal of selected nitrogenous heterocyclic compounds in biologically pretreated coal gasification wastewater (BPCGW) using the catalytic ozonation process combined with the two-stage membrane bioreactor (MBR)

Three identical anoxic-aerobic membrane bioreactors (MBRs) were operated in parallel for 300 consecutive days for raw (R₁), ozonated (R₂) and catalytic ozonated (R₃) biologically pretreated coal gasification wastewater (BPCGW) treatment. The results demonstrated that catalytic ozonation process (COP) applied asa pretreatment remarkably improved the performance of the unsatisfactory single MBR. The overall removal efficiencies of COD, NH₃-N and TN in R₃ were 92.7%, 95.6% and 80.6%, respectively. In addition, typical nitrogenous heterocyclic compounds (NHCs) of quinoline, pyridine and indole were completely removed in the integrated process. Moreover, COP could alter sludge properties and reshape microbial community structure, thus delaying the occurrence of membrane fouling. Finally, the total cost for this integrated process was estimated to be lower than that of single MBR. The results of this study suggest that COP is a good option to enhance pollutants removal and alleviate membrane fouling in the MBR for BPCGW treatment.

Lemna minor tolerance to metal-working fluid residues: implications for rhizoremediation

For the first time in the literature, duckweed (Lemna minor) tolerance (alone or in combination with a consortium of bacteria) to spent metal-working fluid (MWF) was assessed, together with its capacity to reduce the chemical oxygen demand (COD) of this residue. In a preliminary study, L. minor response to pre-treated MWF residue (ptMWF) and vacuum-distilled MWF water (MWFw) was tested. Plants were able to grow in both residues at different COD levels tested (up to 2300 mg·l(-1) ), showing few toxicity symptoms (mainly growth inhibition). Plant response to MWFw was more regular and dose responsive than when exposed to ptMWF. Moreover, COD reduction was less significant in ptMWF. Thus, based on these preliminary results, a second study was conducted using MWFw to test the effectiveness of inoculation with a bacterial consortium isolated from a membrane bioreactor fed with the same residue. After 5 days of exposure, COD in solutions containing inoculated plants was significantly lower than in non-inoculated ones. Moreover, inoculation reduced β+γ-tocopherol levels in MWFw-exposed plants, suggesting pollutant imposed stress was reduced. We therefore conclude from that L. minor is highly tolerant to spent MWF residues and that this species can be very useful, together with the appropriate bacterial consortium, in reducing COD of this residue under local legislation limits and thus minimise its potential environmental impact. Interestingly, the lipophilic antioxidant tocopherol (especially the sum of β+γ isomers) proved to be an effective plant biomarker of pollution.