Novel tiO2 nanocatalysts for wastewater purification: tapping energy from the sun

Heavy metal ion sensing strategies using fluorophores for environmental remediation

The main aim of this review is to provide a holistic summary of the latest advances within the research area focusing on the detection of heavy metal ion pollution, particularly the sensing strategies. The review explores various heavy metal ion detection approaches, encompassing spectrometry, electrochemical methods, and optical techniques. Numerous initiatives have been undertaken in recent times in response to the increasing demand for fast, sensitive, and selective sensors. Notably, fluorescent sensors have acquired prominence owing to the numerous advantages such as good specificity, reversibility, and sensitivity. Further, this review also explores the advantages of various nanomaterials employed in sensing heavy metal ions. In this regard, exclusive emphasis is placed on fluorescent nanomaterials based on organic dyes, quantum dots, and fluorescent aptasensors for metal ion removal from aqueous systems, and to identify the fate of heavy metal ions in the natural environment.

Advancements of Nanotechnology and Nanomaterials in Environmental and Human Protection for Combatting the COVID-19 During and Post-pandemic Era: A Comprehensive Scientific Review

In December 2019, an outbreak of unknown pneumonia emerged in Wuhan City, Hubei Province, China. It was later identified as the SARS-CoV-2 virus and has since infected over 9 million people in more than 213 countries worldwide. Massive papers on the topic of SARS-CoV-2 that have already been published are necessary to be analyzed and discussed. This paper used the combination of systematic literature network analysis and content analysis to develop a comprehensive discussion related to the use of nanotechnology and materials in environmental and human protection. Its is shown that various efforts have been made to control the transmission of this pandemic. Nanotechnology plays a crucial role in modern vaccine design, as nanomaterials are essential tools for antigen delivery, adjuvants, and mimics of viral structures. In addition, nanomaterials and nanotechnology also reported a crucial role in environmental protection for defence and treating the pandemic. To eradicate pandemics now and in the future, successful treatments must enable rapid discovery, scalable manufacturing, and global distribution. In this review, we discuss the current approaches to COVID-19 development and highlight the critical role of nanotechnology and nanomaterials in combating the virus in the human body and the environment.

A critical review on N-modified TiO2 limits to treat chemical and biological contaminants in water. Evidence that enhanced visible light absorption does not lead to higher degradation rates under whole solar light

Intensive research has been focused on the synthesis of N-modified TiO₂ materials having visible light absorption in order to get higher solar photocatalytic degradation rates of pollutants in water. However, an exhaustive revision of the topic underlines several controversial issues related to N-modified TiO₂ materials; these issues concern (a) the methodology used for preparation, (b) the assessment of the structural characteristics, (c) the mechanistic action modes and (d) the raisons argued to explain the limited performances of the prepared materials for organic and biological targets photodegradation in water. Taking advantage of last year's progress in analytical chemistry and in material characterization methods, the authors show, for example, that some works in the literature controversially attribute the term nitrogen doping without enough analytical evidence. Additionally, some papers describe N-modified TiO₂ photocatalysts as being able to generate holes with enough oxidative potential to form hydroxyl radicals under visible light. This last assertion often derives from a no pertinent use of illumination sources, light filters, or targets or a limited understanding of the thermodynamic aspects of the studied systems. None of N-containing materials prepared by herein presented methods leads, under solar light, to a significant enhancement in pollutants degradation and microorganism's inactivation kinetics.

Photocatalysis of Titanium Dioxide for Water Disinfection: Challenges and Future Perspectives

The performance of metal oxides such as titanium dioxide (TiO2), in the conversion of solar energy into chemical energy, is determined by semiconducting properties. The conversion process is closely related to the light-induced reactivity between oxide semiconductors and water, which may lead to partial water oxidation and consequently water disinfection. Key performance-related properties are considered here, including light absorption, light-induced ionisation over the band gap, charge separation, charge transport, charge transfer, and the chemical reactions taking place at anodic and cathodic sites. Optimisation of these interconnected performance-related properties is discussed, along with the photocatalytic application in water disinfection.

Disinfection of urban wastewater by solar driven and UV lamp - TiO₂ photocatalysis: effect on a multi drug resistant Escherichia coli strain

The effect of TiO₂ photocatalysis on the inactivation of an antibiotic resistant Escherichia coli strain selected from an urban wastewater treatment plant (UWWTP) effluent was investigated. Different light sources including a 250 W wide spectrum lamp, a 125 W UV-A lamp and solar radiation, as well as, photocatalysts loadings (TiO₂ Degussa P25) in the range from 0.05 to 2.00 g TiO₂ L(-1) were evaluated. The higher efficiency (total bacterial inactivation after 10 min of irradiation) was observed in the absence of TiO₂ when the wastewater was irradiated using the 250 W lamp. In the presence of TiO₂ a decreasing inactivation trend was observed (99.76% and 72.22% inactivation after 10 min irradiation at 0.10 and 2.00 g TiO₂ L(-1) respectively). Under solar simulated conditions the highest inactivation efficiency (93.17%) after 10 min of irradiation was achieved at the lower photocatalyst loading (0.05 g TiO₂ L(-1)). The concept of "reactor optical thickness" was introduced to explain the rates of disinfection observed. The optimum photocatalyst loading estimated by radiation absorption-scattering modeling was found to be 0.1 g TiO₂ L(-1) for all lamps. The difference between experimental tests and modeling may be due to TiO₂ particles aggregation. Comparative kinetic tests between solar and solar simulated photocatalytic (SSP) processes using 0.05 g TiO₂ L(-1) in suspension showed a quite similar inactivation behavior up to 30 min of irradiation, but only the SSP process resulted in a total inactivation of bacteria after 60 min of exposure. Antibiotic resistant test (Kirby-Bauer) on survived colonies showed that the SSP and SP processes affected in different ways the resistance of E. coli strain to the target antibiotics.

Solar photocatalysis for water disinfection: materials and reactor design

This comprehensive review addresses the fundamentals of photocatalytic mechanism, recent developments in materials synthesis and reactor design.

Investigation of antileishmanial activities of Tio2@Ag nanoparticles on biological properties of L. tropica and L. infantum parasites, in vitro

Leishmaniasis is a public health problem which is caused by protozoon parasites belonging to Leishmania species. The disease threatens approximately 350 million people in 98 countries all over the world. Cutaneous Leishmaniasis (CL) and Visceral Leishmaniasis (VL) are the mostly commonly seen forms of the disease. Treatment of the disease has remained insufficient since current antileishmanial drugs have several disadvantages such as toxicity, costliness and drug-resistance. Therefore, there is an immediate need to search for new antileishmanial compounds. TiO2@Ag nanoparticles (TiAg-Nps) have been demonstrated as promising antimicrobial agents since they provide inhibition of several types of bacteria. The basic antimicrobial mechanism of TiAg-Nps is the generation of reactive oxygen species (ROS). Even though Leishmania parasites are sensitive to ROS, there is no study in literature indicating antileishmanial activities of TiAg-Nps. Herein, in this study, TiAg-Nps are shown to possess antileishmanial effects on Leishmania tropica and Leishmania infantum parasites by inhibiting their biological properties such as viability, metabolic activity, and survival within host cells both in the dark and under visible light. The results indicate that TiAg-Nps decreased viability values of L. tropica, and L. infantum promastigotes 3- and 10-fold, respectively, in the dark, while these rates diminished approximately 20-fold for each species in the presence of visible light, in contrast to control. On the other hand, non-visible light-exposed TiAg-Nps inhibited survival of amastigotes nearly 2- and 2.5-fold; while visible light-exposed TiAg-Nps inhibited 4- and 4.5-fold for L. tropica and L. infantum parasites, respectively. Consequently, it was determined that non-visible light-exposed TiAg-Nps were more effective against L. infantum parasites while visible light-exposed TiAg-Nps exhibited nearly the same antileishmanial effect against both species. Therefore, we think that a combination of TiAg-Nps and visible light can be further used for treatment of CL, while application of TiAg-Nps alone can be a promising alternative in VL treatment.