Selenium recovery from kiln powder of cement manufacturing by chemical leaching and bioreduction

Reduction of selenite and tellurite by a highly metal-tolerant marine bacterium

Selenium (Se) and tellurium (Te) contaminations in soils and water bodies have been widely reported in recent years. Se(IV) and Te(IV) were regarded as their most dangerous forms. Microbial treatments of Se(IV)- and Te(IV)-containing wastes are promising approaches because of their environmentally friendly and sustainable advantages. However, the salt-tolerant microbial resources that can be used for selenium/tellurium pollution control are still limited since industrial wastewaters usually contain a large number of salts. In this study, a marine Shewanella sp. FDA-1 (FDA-1) was reported for efficient Se(IV) and Te(IV) reduction under saline conditions. Process and product analyses were performed to investigate the bioreduction processes of Se(IV) and Te(IV). The results showed that FDA-1 can effectively reduce Se(IV) and Te(IV) to Se0 and Te0 Se(IV)/Te(IV) to Se0/Te0 in 72 h, which were further confirmed by XRD and XPS analyses. In addition, enzymatic and RT‒qPCR assays showed that flavin-related proteins, reductases, dehydrogenases, etc., could be involved in the bioreduction of Se(IV)/Te(IV). Overall, our results demonstrate the ability of FDA-1 to reduce high concentrations of Se(IV)/or Te(IV) to Se0/or Te0 under saline conditions and thus provide efficient microbial candidate for controlling Se and Te pollution.

Phase partitioning of mercury, arsenic, selenium, and cadmium in Chlamydomonas reinhardtii and Arthrospira maxima microcosms

As the global human population increases, demand for protein will surpass our current production ability without an increase in land use or intensification. Microalgae cultivation offers a high yield of protein, and utilization of wastewater from municipal or agricultural sources in place of freshwater for microalgae aquaculture may increase the sustainability of this practice. However, wastewater from municipal and agricultural sources may contain contaminants, such as mercury (Hg), cadmium (Cd), selenium (Se), and arsenic (As). Association of these elements with algal biomass may present an exposure risk to product consumers, while volatilization may present an exposure hazard to industry workers. Thus, the partitioning of these elements should be evaluated before wastewater can be confidently used in an aquaculture setting. This study explored the potential for exposure associated with Arthrospira maxima and Chlamydomonas reinhardtii aquaculture in medium contaminated with 0.33 μg Hg L^-1, 60 μg As L^-1, 554 μg Se L^-1, and 30 μg Cd L^-1. Gaseous effluent from microalgae aquaculture was analyzed for Hg, As, Se, and Cd to quantify volatilization. A mass balance approach was used to describe the partitioning of elements between biomass, medium, and gas phases at the end of exponential growth. Contaminants were recovered predominantly in medium and biomass, regardless of microalgae strain. In the case of Hg, 48 ± 2% was associated with A. maxima biomass and 55 ± 8% with C. reinhardtii when Hg was present as the only contaminant, but this increased to 85 ± 11% in C. reinhardtii biomass when As, Se, and Cd were also present. A small and highly variable abiotic volatilization of Hg was observed in the gas phase of both A. maxima and C. reinhardtii cultures. Evidence presented herein suggests that utilizing wastewater containing Hg, Cd, Se, and As for microalgae cultivation may present health hazards to consumers.

Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms

Selenium (Se) is an essential element with application in manufacturing from food to medical industries. Water contamination by Se is of concern due to anthropogenic activities. Recently, Se remediation has received increasing attention. Hence, different types of remediation techniques are listed in this work, and their potential for Se recovery is evaluated. Sorption, co-precipitation, coagulation and precipitation are effective for low-cost Se removal. In photocatalytic, zero-valent iron and electrochemical systems, the above mechanisms occur with reduction as an immobilization and detoxification process. In combination with magnetic separation, the above techniques are promising for Se recovery. Biological Se oxyanions reduction has been widely recognized as a cost-effective method for Se remediation, simultaneously generating biosynthetic Se nanoparticles (BioSeNPs). Increasing the extracellular production of BioSeNPs and controlling their morphology will benefit its recovery. However, the mechanism of the microbial production of BioSeNPs is not well understood. Se containing products from both microbial reduction and abiotic methods need to be refined to obtain pure Se. Eco-friendly and cost-effective Se refinery methods need to be developed. Overall, this review offers insight into the necessity of shifting attention from Se remediation to Se recovery.

The potential of Pseudomonas for bioremediation of oxyanions

Non-metal, metal and metalloid oxyanions occur naturally in minerals and rocks of the Earth's crust and are mostly found in low concentrations or confined in specific regions of the planet. However, anthropogenic activities including urban development, mining, agriculture, industrial activities and new technologies have increased the release of oxyanions to the environment, which threatens the sustainability of natural ecosystems, in turn affecting human development. For these reasons, the implementation of new methods that could allow not only the remediation of oxyanion contaminants but also the recovery of valuable elements from oxyanions of the environment is imperative. From this perspective, the use of microorganisms emerges as a strategy complementary to physical, mechanical and chemical methods. In this review, we discuss the opportunities that the Pseudomonas genus offers for the bioremediation of oxyanions, which is derived from its specialized central metabolism and the high number of oxidoreductases present in the genomes of these bacteria. Finally, we review the current knowledge on the transport and metabolism of specific oxyanions in Pseudomonas species. We consider that the Pseudomonas genus is an excellent starting point for the development of biotechnological approaches for the upcycling of oxyanions into added-value metal and metalloid byproducts.

Biological selenite removal and recovery of selenium nanoparticles by haloalkaliphilic bacteria isolated from the Nakdong River

Microbial selenite reduction has increasingly attracted attention from the scientific community because it allows the separation of toxic Se from waste sources with the concurrent recovery of Se nanoparticles, a multifunctional material in nanotechnology industries. In this study, four selenite-reducing bacteria, isolated from a river water sample, were found to reduce selenite by > 85% within 3 d of incubation, at ambient temperature. Among them, strain NDSe-7, belonging to genus Lysinibacillus, can reduce selenite and produce Se nanospheres in alkaline conditions, up to pH 10.0, and in salinity of up to 7.0%. This strain can reduce 80 mg/L of selenite to elemental Se within 24 h at pH 6.0-8.0, at a temperature of 30-40 °C, and salinity of 0.1-3.5%. Strain NDSe-7 exhibited potential for use in Se removal and recovery from industrial saline wastewater with high alkalinity. This study indicates that extremophilic microorganisms for environmental remediation can be found in a conventional environment.

Biological treatment of selenate-containing saline wastewater by activated sludge under oxygen-limiting conditions

Selenium often coincides with high salinity in certain industrial wastewaters, which can be a limitation in the practical application of biological treatment. However, there are no studies on the biological treatment of selenate-containing saline wastewater. A sequencing batch reactor inoculated with activated sludge was applied to treat selenate in the presence of 3% (w/v) NaCl. Start-up of the sequencing batch reactor with a 7-day cycle duration and excessive acetate as the sole carbon source succeeded in removing above 98% and 72% soluble and solid selenium, respectively, under oxygen-limiting conditions. Further selenium removal experiments with a shorter cycle duration of 3 days and a stepwise decrease of acetate addition achieved soluble and total selenium removal efficiencies in most batches above 96% and 80%, respectively. Mass balance analysis revealed that selenate was converted into elemental selenium, most of which was accumulated in the sludge. Microscopic analyses also found that elemental selenium particles were primarily present as approximately 2 μm large rods, with some extremely large particles above 10 μm. Although the bacterial populations responsible for selenium removal, especially selenate reduction, could not be identified by microbial community analysis, this study reported for the first time that selenate could be biologically treated in the presence of considerable salinity, offering implications for the practical treatment of selenium in certain industrial wastewaters.

Characterization of moderately halotolerant selenate- and tellurite-reducing bacteria isolated from brackish areas in Osaka

Moderately halotolerant selenate- and tellurite-reducing bacteria were characterized for wastewater treatment applications. A selenate-reducing strain 9a was isolated from the biofilm of a leachate treatment plant at a sea-based waste disposal site. A tellurite-reducing strain Taa was isolated from an enrichment culture derived from brackish sediment. Both bacterial strains were Shewanella species. Strain 9a could anaerobically remove 45-70% of 1.0 mM selenate and selenite from water containing up to 3% NaCl within 4 days, while strain Taa could anaerobically and aerobically remove 70-90% of 0.4 mM tellurite from water containing up to 6% NaCl within 3 days. Globular particles of insoluble selenium were observed both outside and inside the cells of strain 9a. The insoluble tellurium formed by strain Taa was globular under microaerobic conditions but nanorod under aerobic conditions. These bacteria will yield a range of useful selenium and tellurium nanomaterials as well as wastewater treatment applications.