Properties of vanadium-loaded iron sorbent after alkali regeneration

Recent advances in removal techniques of vanadium from water: A comprehensive review

In recent years, with the development of economy and industry, water contaminated with heavy metal has become a global environmental problem. Vanadium (V) is an emerging contaminant reported in wastewater along with the increasing mining, smelting and recovering of vanadium ores and application in many fields as a significant national strategy resource. The increasing attention has been paid to the separations of V from water due to its potential toxic to animals and human beings. In the present study, the most common V removal techniques including adsorption, microbiological treatment, chemical precipitation, solvent extraction, electrokinetic remediation, photocatalysis, coagulation and membrane filtration are presented with discussion of their advantages, limitations and the recent achievements. Several major influencing factors and mechanisms of various processes have been briefly analyzed. Some research perspectives are proposed for improving the capacities to remove V from water. The core objective of this review is to provide comprehensive information or database for the superior approach for V removal.

Pilot-scale field study for vanadium removal from mining-influenced waters using an iron-based sorbent

This study investigated the removal of vanadium from mining waters at a closed mine site (Mustavaara, Finland) using granular ferric oxyhydroxide (CFH-12) on pilot scale. Two filter systems, pilot A and pilot B, were placed in different streams, where the influent in pilot A contained a higher and very variable vanadium concentration (6.46-99.1 mg/L), while the pilot B treated influent had lower vanadium concentrations (0.443-2.33 mg/L). The operation periods were 51 days for pilot A and 127 days for pilot B. Water quality analyses revealed that vanadium was efficiently captured in the filter system in both pilots. X-ray fluorescence analysis revealed that the filter beds were not fully saturated with vanadium. X-ray photoelectron spectroscopy confirmed that oxidised vanadium (5⁺) existed in the used CFH-12 and the carbon content in the used material had increased due to the adsorbed organic compounds. For comparison, lab-scale coagulation experiments were conducted using ferric sulphate for the influent of pilot A (the sampled batch contained 15.9 mg/L V). The optimum coagulant dosage was 350 mg/L (>93% vanadium removal) at the original pH (7.8-7.9) of the influent, whereas the required coagulant amount decreased when the influent pH was adjusted to 4.6-4.8.