Fabrication of Fe3O4/MgAl-layered double hydroxide magnetic composites for the effective removal of Orange II from wastewater

Efficient activation of peroxymonosulfate by CoMg2Mn-LDO for the degradation of orange Ⅱ: The important synergy of Mg

Advanced oxidation process (AOP) based on peroxymonosulfate (PMS) has aroused extensive discussion in the degradation of organic pollutants due to the strong oxidative ability of SO4•-. Great attention has been paid to developing transition metal catalysts for PMS activation. Still, few studies focused on the co-catalysis effect of non-redox metals. To study the co-catalysis of Mg and develop a more efficient metal catalyst, the CoMg2Mn-LDO was prepared by a co-precipitation method accompanied by calcination. The material showed an excellent ability for PMS activation. 97.1% of Orange Ⅱ was degraded within 15 min with the reaction rate constant (kobs) of 0.539 min-1 when pH equals 6.7, the dosages of CoMg2Mn-LDO and PMS were 90 mg L-1 and 100 mg L-1, respectively. By contrast, the value of kobs was 0.375 min-1 for the system of Co3Mn-LDO/PMS at the same experimental conditions. The electron paramagnetic resonance (EPR) and quenching experiments results proved the existence of O2•-, SO4•- and HO• in the CoMg2Mn-LDO/PMS system and the dominant role of SO4•- in Orange Ⅱ degradation. The synergistic effects among Co, Mn, and Mg were found to be responsible for the outstanding catalytic ability of CoMg2Mn-LDO. The presence of Mg could not only promote the formation of Mg-HSO5- and CoOH+ complexes but also reduce the leaching of Co and Mn, which accelerated the generation of free radicals and decreased secondary pollution risk. Based on the overall analysis, reasonable activation mechanisms of PMS and possible degradation pathways of Orange Ⅱ in this reaction system were proposed. This work proves that Mg could be applied as an effective co-catalytic element and provides new insight into developing transition metal catalysts for PMS-based AOPs.

Magnetic Rubber@ magnesium aluminum layered double hydroxide as nanostructured sorbent; application in determination of estrogenic hormones and bisphenol A

A magnetic solid-phase extraction (MSPE) method was developed for the enrichment of trace amounts of estrone (E1), 17-β-estradiol (E2) and bisphenol A (BPA) from aqueous samples using the Rubber-Fe3O4@SiO2@Mg-Al Layered double hydroxide followed by determination by HPLC. The proposed sorbent was characterized by X-ray diffraction, Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Vibrating-sample magnetometer, Thermal gravimetric analysis, N2 adsorption/desorption Brunauer-Emmett-Teller surface analysis, Barrett-Joyner-Halenda pore size analysis and Energy dispersive X-ray spectroscopy. Factors affecting the extraction efficiency such as pH, ionic strength, extraction temperature and time, desorption solvent and time were optimized. The limit of detection and quantification were obtained as 0.33, 1 µg L-1 for the E1 and E2 and BPA, respectively. Also, linear range of the method were 1-150, 1-100 and 1-150 µg L-1for E1, E2, and BPA, respectively. Relative standard deviations (RSD%) for the repeatability of extraction on one sorbent were obtained as 2.98, 1.31 and 3.50%, also, sorbent to sorbent repeatability were investigated and RSD% values were obtained as 7.58, 8.35 and 8.12% for E1, E2 and BPA, respectively.

Magnetic layered double hydroxide-based composites as sustainable adsorbent materials for water treatment applications: Progress, challenges, and outlook

Layered double hydroxides (LDHs) have shown exciting applications in water treatment because of their unique physicochemical properties, which include high surface areas, tunable chemical composition, large interlayer spaces, exchangeable content in interlayer galleries, and ease of modification with other materials. Interestingly, their surface, as well as the intercalated materials within the layers, play a role in the adsorption of the contaminants. The surface area of LDH materials can be further enhanced by calcination. The calcined LDHs can reattain their structural features upon hydration through the "memory effect" and may uptake anionic species within their interlayer galleries. Besides, LDH layers are positively charged within the aqueous media and can interact with specific contaminants through electrostatic interactions. LDHs can be synthesized using various methods, allowing the incorporation of other materials within the layers or forming composites that can selectively capture target pollutants. They have been combined with magnetic nanoparticles to improve their separation after adsorption and enhance adsorptive features in many cases. LDHs are relatively greener materials because they are mostly composed of inorganic salts. Magnetic LDH-based composites have been widely employed for the purification of water contaminated with heavy metals, dyes, anions, organics, pharmaceuticals, and oil. Such materials have shown interesting applications for removing contaminants from real matrices. Moreover, they can be easily regenerated and used for several adsorption-desorption cycles. Magnetic LDHs can be regarded as greener and sustainable because of several green aspects in their synthesis and reusability. We have critically reviewed their synthesis, applications, factors affecting their adsorption performance, and related mechanisms in this review. In the end, some challenges and perspectives are also discussed.

Simultaneous preconcentration and fluorescence detection of ATP by a hybrid nanocomposite of magnetic nanoparticles incorporated in mixed metal hydroxide

A new approach for increasing the sensitivity of adenosine triphosphate (ATP) detection was demonstrated. The assay was based on the synergetic function of a hybrid nanocomposite (MNPs@MMH) composed of magnetic nanoparticles (MNPs) incorporated in a mixed metal hydroxide (MMH). MNPs@MMH can be utilized as an efficient green extractant and peroxidase catalyst. The trace level of ATP in the sample solution was first extracted by the MNPs@MMH hybrid nanocomposite through the ion exchange properties of MMH and adsorbed on the surface of the MNPs@MMH. The concentration of ATP was related to the fluorescence intensity of 2,3-diaminophenazine (DAP) generated from peroxidase-like activity of the MNPs in the presence of H₂O₂ and o-phenylenediamine (OPD). In the presence of ATP, the active surface of the MNPs was diminished, and the amount of DAP generated was reduced. Thus, the concentration of ATP was related to the degree of fluorescence decrease compared to the fluorescence intensity of the system without ATP. Based on the proposed strategy, a highly sensitive assay for ATP was achieved. This assay exhibited good selectivity for detection of ATP over derivatives and other common anions. The proposed assay allowed the detection of ATP in a concentration range of 2.5-20 μM with a detection limit of 0.41 μM.

Recent progress in the synthesis of Layered Double Hydroxides and their application for the adsorptive removal of dyes: A review

Layered double hydroxides (LDHs), also known as anionic clays, are lamellar inorganic solids with a brucite-like structure and consist of positively charged metal hydroxide sheets intercalated by anions and water molecules. Choice of LDH is beneficial as it displays properties like simple synthesis procedures, adjustable structure, stability, large surface area, homogeneous positive charge distribution over the surface, interplanar spacing, and versatility to synthesize a variety of composites. Due to these properties LDHs act as efficient adsorbents for wastewater treatment. This review presents a detailed overview of the removal of hazardous organic dyes using different LDHs and LDH-hybrids/composites. The review also incorporates methods of synthesis of various LDHs and composites and the effect of their morphology on dye removal capacity. The effects of adsorption variables such as pH, adsorbent dosage, initial concentration of dye, contact time on the adsorption of these materials are also explained along with adsorption isotherms, kinetics and operative mechanisms. This article incorporates 156 references, majority of which have been taken from the available literature of last 5 years.

Enhanced adsorption properties of organic ZnCr-LDH synthesized by soft template method for anionic dyes

Organic ZnCr-LDH (ST-LDH) was synthesized by a facile one-step hydrothermal technique using methyl orange (MO) as a soft template agent, which can efficiently remove methyl orange (MO), Congo red (CR), and orange II (OII) from aqueous solution. The microstructure of ST-LDH by modifying changed obviously, from the cellular structure to the stacking structure formed by the face-face contact of hydrotalcite nanosheets, which resulted in much more exchangeable nitrate ions to remain in the interlayer space. The pre-insertion of benzene sulfonate as a pillar expanded the interlayer gallery, which facilitated the pollutant anions (MO, CR, and OII) into the interlayer of LDH in the subsequent adsorption process. The maximum adsorption capacity of ST-LDH for MO, CR, and OII was 4200.8 mg/g, 1252.0 mg/g, and 1670.6 mg/g, respectively, which is approximately 1.86 times, 1.8 times, and 2.32 times that of the pristine NO₃-LDH, respectively. The removal mechanism of anionic dyes was determined as anion exchange between NO₃^- anions and dye molecules. The adsorption behavior for MO and OII is multilayer adsorption, while the adsorption behavior for CR is monolayer adsorption. The adsorption process mainly was controlled by the chemical bonding between the dye molecules and adsorbent active sites. The LDH can be effectively regenerated by photocatalysis after MO adsorption. The ST-LDH has a great potential to be used as a high-efficient adsorbent to remove anionic dyes from aqueous solution. The schematic illustration of the synthetic process of soft template agent modified and unmodified hydrotalcites by one-pot hydrothermal method and the adsorption process of MO by ST-LDH were shown in Fig. 12. Modified hydrotalcite (ST-LDH) was prepared using methyl orange (MO) as a soft template agent. Compared with unmodified hydrotalcite (NO₃-LDH), the insertion of benzene sulfonate anions into the hydrotalcite layer resulted in the increase of the interlayer spacing from 8.269 to 8.654Å. The LDH host structure pre-intercalated by benzene sulfonate anions evolved into pillared materials in interlayer; benzene sulfonate anions as a column expanded the interlayer spacing of (003) base plane, which facilitated the pollutant anions (MO, CR, and OII) into the interlayer of ST-LDH and exchanged with NO₃^- anion in the subsequent adsorption process. It can be inferred that in the process of modification hydrotalcite by benzene sulfonate, a small amount of benzene sulfonate anions pre-inserted into the gallery of hydrotalcite with a monolayer model in the process of hydrotalcite modification, and its inclination angle is calculated to be about 29.1°. After ST-LDH sample adsorbed the MO molecules, dye molecules intercalated into the LDH host, and successful exchange with NO₃^- anions, the d₀₀₃ value increased to 24.78 Å. A large amount of MO^- anions were intercalated into the gallery of ST-LDH with a bilayer model according to the Freundlich isotherm model, and the tilting angle increases to 53.6°. The adsorption capacity of MO by ST-LDH was significantly enhanced to 4200.8 mg/g, which was much higher than that of NO₃-LDH (2252.8 mg/g). Schematic illustration of the synthetic process of LDH materials and adsorption process of MO by ST-LDH.

Pretreatment by recyclable Fe3O4@Mg/Al-CO3-LDH magnetic nano-adsorbent to dephosphorize for the determination of trace F- and Cl- in phosphorus-rich solutions

The magnetic nano-adsorbent Fe₃O₄@Mg/Al-CO₃-LDH (Mg/Al-type layered double hydroxide) with a CO₃²⁻ interlayer anion has been synthesized successfully on Fe₃O₄ nanoparticles via a urea hydrothermal method. It is confirmed that the nano-adsorbent can adsorb PO₄³⁻ rapidly and efficiently in multi-ion solutions; meanwhile, it did not adsorb any F⁻ and Cl⁻, even with a high amount of the nano-adsorbent or a longer adsorption time. This behaviour is beneficial for applications to remove PO₄³⁻ in phosphorus-rich solutions, and especially can be utilized to determine trace F⁻ and Cl⁻ anions in phosphorus-rich solutions by physical and chemical analysis methods including ion chromatography without serious interference from PO₄³⁻ for trace determinations. Herein, the hydrothermally synthesized Fe₃O₄@Mg/Al-CO₃-LDH was characterized via SEM, TEM, SAED, XRD, FTIR, magnetic hysteresis loop analysis and adsorption–desorption isotherm analysis. The structure and stability, adsorption mechanism, magnetic saturation value, specific surface area, total pore volume, phosphate adsorption capacity and recyclability are discussed. Using the optimized pretreatment conditions, Fe₃O₄@Mg/Al-CO₃-LDH was utilized successfully to adsorb PO₄³⁻ in real samples and determine trace F⁻ and Cl⁻ accurately by ion chromatography; this would be very beneficial for continuous analysis and on-line tests by physical and chemical analysis methods without interference from PO₄³⁻ in phosphorus-rich samples, leaving F⁻ and Cl⁻ even if in a trace content.

Synthesized recyclable Fe₃O₄@Mg/Al-CO₃-LDH magnetic nano-adsorbent is utilized to dephosphorize phosphorous-rich solutions but leave F⁻ and Cl⁻ to be detected chromatographically.