Photocatalytic removal of fluoroquinolones and their antimicrobial activity from water matrices at trace levels: a comparison of commercial TiO2 catalysts

Synthesis and characterization of TiO2-carbon filter materials for water decontamination by adsorption-degradation processes

Wastewater treatment is becoming ever more challenging due to the increasing levels of molecular pollutants that are challenging for existing approaches. Innovative materials are required to help produce potable water from heavily contaminated water sources. One such material is titanium dioxide-activated carbon (TiO2/AC) heterostructures, which combine the photocatalytic properties of TiO2 with the adsorption properties of the ACs. To date, studies on TiO2/AC heterostructures for real-world water purification have yet to be performed. This study aimed to address this gap by comparing the effectiveness of titanium isopropoxide (Ti(OiPr)4) and titanium butoxide (Ti(OBu)4) for synthesizing TiO2/AC heterostructures using four different methods (sol-gel, solvothermal, and microwave-assisted hydrothermal methods [x2]). The elaborated heterostructures were compared with commercial TiO2 materials for their ability to degrade five emerging contaminants (caffeine, hydrochlorothiazide, saccharin, sulfamethoxazole, and sucralose). Hydrochlorothiazide and sulfamethoxazole were demonstrated to be rapidly degraded by UV-C irradiation within 15 min. Caffeine, saccharin, and sucralose were less susceptible to UV degradation. All the elaborated TiO2/AC heterostructures consisted of pure anatase phase, with Ti(OBu)4 syntheses generating larger average crystal sizes and lower surface areas. Sol-gel preparations produced the most effective TiO2/AC heterostructures due to their high surface area. Compared with the commercial TiO2, the heterostructures enhanced the photocatalytic activity of TiO2 by up to 10.0 times. Also, the heterostructures remained effective at environmentally relevant conditions (i.e., concentration of the contaminant and water matrices). The reuse of the materials was tested and showed no reduction in efficiency after four removal/regeneration cycles. Overall, this study presents novel TiO2/AC heterostructures with increased photocatalytic efficiency that can serve as an efficient material for removing contaminants at large scales (e.g., water treatment plants).

Titanium dioxide nanoparticles: Recent progress in antimicrobial applications

For decades, the antimicrobial applications of nanoparticles (NPs) have attracted the attention of scientists as a strategy for controlling the ever-increasing threat of multidrug-resistant microorganisms. The photo-induced antimicrobial properties of titanium dioxide (TiO₂ ) NPs by ultraviolet (UV) light are well known. This review elaborates on the modern methods and antimicrobial mechanisms of TiO₂ NPs and their modifications to better understand and utilize their potential in various biomedical applications. Additional compounds can be grafted onto TiO₂ nanomaterial, leading to hybrid metallic or non-metallic materials. To improve the antimicrobial properties, many approaches involving TiO₂ have been tested. The results of selected studies from the past few years covering the most recent trends in this field are discussed in this review. There is extensive evidence to show that TiO₂ NPs can exhibit certain antimicrobial features with disputable roles of UV light. Hence, they are effective in treating bacterial infections, although the majority of these conclusions came from in vitro studies and in the presence of some additional nanomaterials. The methods of evaluation varied depending on the nature of the research while researchers incorporated different techniques, including determining the minimum inhibitory concentration, cell count, and using disk and well diffusion methods, with a noticeable indication that cell count was the most and dominant criterion used to evaluate the antimicrobial activity. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Evaluation of residual antimicrobial activity and acute toxicity during the degradation of gatifloxacin by ozonation

The concerns regarding the occurrence of pharmaceuticals in wastewater treatment plants have increased in the last decades. Gatifloxacin (GAT), the fourth generation of fluoroquinolones, has been widely used to treat both Gram-positive and Gram-negative bacteria and has a limited metabolization. The present study aimed to evaluate ozonation as a technique to degrade GAT. An exchange A UHPLC-MS/MS by an UHPLC-MS/MS method was used to quantify the residual of GAT and to assess its degradation products. The removal efficiency was higher under alkaline conditions (pH = 10), reaching up to 99% of GAT after 4 min. It was also observed that the first ozone attack on the GAT molecule was through the carboxylic group. In contrast, under acid conditions (pH = 3), the ozone attack was first to the piperazinyl ring. The antimicrobial activity was evaluated using Escherichia coli and Bacillus subtilis as test organisms, and it was observed that the residual activity reduced most under alkaline conditions. In contrast, the best condition to remove the residual toxicity evaluated for the marine bacteria V. fischeri was the acidic one. Due to this, ozonation seemed to be an exciting process to remove GAT in aqueous media.

Degradation of antidepressant pharmaceuticals by photoperoxidation in diverse water matrices: a highlight in the evaluation of acute and chronic toxicity

Photoperoxidation (UV/H₂O₂) was used to degrade three of the worldwide most consumed antidepressant pharmaceuticals-bupropion, escitalopram, and fluoxetine-in ultrapure water, drinking tap water, surface water, and reclaimed water. The study was performed with antidepressants in concentration levels in which these compounds usually occur in the water matrices. Online solid-phase extraction coupled to UHPLC-MS/MS was used to quantify the analytes during degradation studies. The UV/H₂O₂ process was able to degrade bupropion and fluoxetine in ultrapure water, using 0.042 mmol L^-1 of H₂O₂ and 1.9 kJ of UV-C irradiation. Nevertheless, escitalopram, which had the most recalcitrant character among the studied antidepressants, needed a tenfold more oxidant and UV-C irradiation. The primary metabolites of the antidepressants were identified as the major by-products generated by the UV/H₂O₂ process, and they persisted in the solution even when the parent compound was degraded. The residual toxicity of the solution was evaluated for two different trophic levels. The UV/H₂O₂ process reduced the toxicity of the solution to Raphidocelis. subcapitata microalgae after 30 min of reaction. On the other hand, the toxicity of the residual solution increased over the reaction time to the marine bacteria Vibrio fischeri (reaching up to 48.3% of bioluminescence inhibition after 60 min of reaction). Thus, our results evidenced that the toxicity against different trophic levels and the monitoring of the by-products formed are important aspects to be considered regarding the safety of the treated solution and the optimization of the treatment process.

Removal of the antimicrobial activity from fortified effluents with fluoroquinolones by photocatalytic processes: a comparative study of differently synthesized TiO2-N

This study presents a comparison of three methods for TiO₂-N synthesis that were applied in the photocatalytic oxidation of the fluoroquinolones (FQs) ciprofloxacin, ofloxacin, and lomefloxacin in aqueous solution. The TiO₂-N bandgap is small enough to allow the use of solar energy in the photocatalytic oxidation (PCO) reactions. The TiO₂ doped by a sol-gel method with titanium butoxide (TiO₂-N-BUT) and titanium isopropoxide (TiO₂-N-PROP) as the precursor were effective as the TiO₂ (P25) impregnation with urea (TiO₂-N-P25) to degrade the FQs. The FQ degradation was higher by 74, 65, and 91%, respectively for TiO₂-N-BUT, TiO₂-N-PROP, and TiO₂-N (load 50 mg L^-1, 20 min of reaction under 28 W UV-A_Solar). The TiO₂-P25 with urea showed the best performance in FQ degradation. The reaction intermediates might present modifications in their acceptor groups by PCO and, because of that the antimicrobial activity dropped as the reaction time increased. Reactions with TiO₂-N-P25 (100 mg L^-1) and TiO₂-N-BUT (100 mg L^-1) achieved ≥ 80% of antimicrobial activity removal from the mixed FQ solution (C_{ciprofloxacin} = 100 μg L^-1; C_ofloxacin = 100 μg L^-1; C_lomefloxacin = 100 μg L^-1) after 40 min of reaction, for both for Escherichia coli and Bacillus subtilis.

Water Depollution and Photo-Detoxification by Means of TiO2: Fluoroquinolone Antibiotics as a Case Study

Photocatalysis by semiconductors is considered one of the most promising advanced oxidation processes (AOPs) and TiO2 is the most well-studied material for the removal of contaminants from the aquatic system. Over the last 20 years, pharmaceuticals have been the most investigated pollutants. They re-enter the environment almost unmodified or slightly metabolized, especially in the aquatic environment, since the traditional urban wastewater treatment plants (WWTPs) are not able to abate them. Due to their continuous input, persistence in the environment, and unpleasant effects even at low concentrations, drugs are considered contaminants of emerging concern (ECs). Among these, we chose fluoroquinolone (FQ) antibiotics as an environmental probe for assessing the role of TiO2 photocatalysis in the degradation of recalcitrant pollutants under environmental conditions and detoxification of surface waters and wastewaters. Due to their widespread diffusion, their presence in the list of the most persistent pollutants, and because they have been deeply investigated and their multiform photochemistry is well-known, they are able to supply rich information, both chemical and toxicological, on all key steps of the oxidative degradation process. The present review article explores, in a non-exhaustive way, the relationship among pollution, toxicity and remediation through titanium dioxide photocatalysis, with particular attention to the toxicological aspect. By using FQs as the probe, in depth indications about the different phases of the process were obtained, and the results reported in this paper may be useful in the improvement of large-scale applications of this technology, and—through generally valid methods—they could be deployed to other pharmaceuticals and emerging recalcitrant contaminants.

Enhancing photocatalytic degradation of methyl orange by crystallinity transformation of titanium dioxide: A kinetic study

This work aimed to enhance the photocatalytic degradation of methyl orange (MO) by crystallinity transformation of titanium dioxide (TiO₂ ). In addition, the kinetic degradation of MO was determined. To transform its crystallinity, TiO₂ was synthesized using a sol-gel method and calcined at between 200°C to 600°C. Calcination at a temperature of 250°C resulted in TiO₂ that showed the best performance, corresponding to MO removal of 87% ± 7%. MO removal by TiO₂ calcined between 250°C to 400°C was higher than for commercial TiO₂ powder (Sigma-aldrich) (62% ± 4%). TiO₂ with a small crystallite size and high anatase fraction enhanced the photocatalytic degradation of MO, while the specific surface area and surface roughness seemed to play a minor role. The photocatalytic degradation of MO was NaCl-independent, while the photocatalytic activity increased with decreased pH. Reused TiO₂ showed similar photocatalytic degradation of MO compared with pristine TiO₂ , at 84 ± 2%. The oxidation kinetics of TiO₂  calcined at 250°C were fitted to the Langmuir-Hinshelwood model (R²  = 0.9134). The k_r and K_s values were 0.027 mg L^-1  min^-1  and 0.621 L/mg, respectively. Crystallinity transformation was a major factor in the enhancement of photocatalytic degradation of MO. PRACTITIONER POINTS: Photocatalytic activity of TiO₂ depends on calcination temperature, pH, and a number of UVC lamps. TiO₂ with a small crystallite size and high anatase fraction enhanced the photocatalytic degradation of MO.