Unusual behavior of MgFe2O4 during regeneration: desorption versus specific adsorption

Investigation on the feasibility of recycled polyvinylidene difluoride polymer from used membranes for removal of methylene blue: experimental and DFT studies

This study reports the feasibility of recycled polyvinylidene difluoride (PVDF) beads to decolourize methylene blue (MB) from aqueous streams. The beads were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FT-IR) for its morphological and structural analysis. The effect of various process parameters such as adsorbent dose, initial concentration, contact time, and pH was studied. The first principle density functional theory (DFT) calculations were performed to investigate the underlying mechanism behind the adsorption process. The MB dye adsorption on recycled PVDF beads followed the pseudo-second-order kinetics and Langmuir isotherm, indicating the adsorption was chemical and monolayer. The maximum adsorption capacity obtained was 27.86 mg g^-1. The adsorption energy of MB-PVDF predicted from the DFT study was -64.7 kJ mol^-1. The HOMO-LUMO energy gap of PVDF decreased from 9.42 eV to 0.50 eV upon interaction with MB dye due to the mixing of molecular orbitals. The DFT simulations showed that the interaction of the MB dye molecule was from the electronegative N atom of the MB dye molecule, implying that electrostatic interactions occurred between the recycled PVDF beads and the positively charged quaternary ammonium groups in MB dye. The present study demonstrates the potential of recycled PVDF beads for a low-cost dye removal technique from textile wastewater.

Effect of Mg2+ ions on competitive metal ions adsorption/desorption on magnesium ferrite: Mechanism, reusability and stability studies

The adsorption behavior of magnesium ferrite in single- and multicomponent metal ions solutions in the presence of Mg²⁺ ions were studied. A dramatic decrease in the adsorption capacity of magnesium ferrite towards Mn²⁺, Co²⁺, and Ni²⁺ ions for comparison study of single- and multicomponent solutions was established. The affinity of the sorbent in accordance with the maximum sorption capacities increases in the following order Cu²⁺ > Co²⁺ > Ni²⁺ > Mn²⁺. High efficiency of magnesium ferrite regeneration (~100%) with aqueous solutions of magnesium chloride in the concentration range of 0.001-0.1 M was shown. The low degree of toxic metal ions desorption combined with XRD, IR spectroscopy, and EDX analysis data indicate the key role of Mg²⁺ ion adsorption in the magnesium ferrite adsorbent regeneration. The positive effect of the introduction of Mg²⁺ ions into multicomponent solutions on metal ions adsorption was established, which is accompanied by an increase in the maximum sorption capacity for all metal ions and especially significant increase in the selectivity towards Cu²⁺ ions (2.41 mmol/g). The stability of the crystal structure of magnesium ferrite and a low degree of Mg²⁺ and Fe³⁺ ions leaching during multiple cycles of adsorption and regeneration of the adsorbent were observed.

Efficient removal of various coexisting organic pollutants in water based on β-cyclodextrin polymer modified flower-like Fe3O4 particles

HYPOTHESIS

The construction of porous β-cyclodextrin polymer (β-CDP) modified flower-like Fe₃O₄ particles (CDP@Fe₃O₄) is expected to remove various organic pollutants from water, based on the larger specific surface area of flower-like Fe₃O₄ particles and the active sites provided by β-CDP. With the help of various noncovalent interactions, the removal ability of CDP@Fe₃O₄ for various water-soluble and water-insoluble organic pollutants were systematically studied.

EXPERIMENTS

CDP@Fe₃O₄ were successfully synthesized and applied for the simultaneous removal of various organic pollutants with different electrical properties, structure and hydrophobicity. Adsorption efficiency, adsorption process, adsorption mechanism and the reusability of CDP@Fe₃O₄ for single pollutant and mixed pollutants were comprehensively investigated.

FINDINGS

CDP@Fe₃O₄ exhibited excellent adsorption capabilities for various pollutants. Importantly, when these pollutants were coexisting, CDP@Fe₃O₄ still maintained a comparable removal ability for various pollutants. Efficient removal of organic pollutants was attributed to varieties of noncovalent interactions between organic pollutants and CDP@Fe₃O₄, including hydrophobic interactions, hydrogen bonds, π-π and electrostatic interactions. These results revealed that the excellent adsorption ability and convenient regeneration make CDP@Fe₃O₄ being a potential candidate in various complex organic wastewater purification.

Removal of Mercury (II) by EDTA-Functionalized Magnetic CoFe2O4@SiO2 Nanomaterial with Core-Shell Structure

In order to reduce the difficulty and risk of operation, decrease the preparation time and improve the adsorption performance of magnetic nano-silicon adsorbent with core-shell structure, a carboxylated CoFe₂O₄@SiO₂ was prepared by EDTA-functionalized method using a safe, mild and simple hydrothermal method. The results show that the prepared material of CoFe₂O₄@SiO₂-EDTA has a maximum adsorption capacity of 103.3 mg/g for mercury ions (Hg(II)) at pH = 7. The adsorption process of Hg(II) is a chemical reaction involving chelation and single-layer adsorption, and follows the pseudo-second-order kinetic and Langmuir adsorption isotherm models. Moreover, the removal of Hg(II) is a spontaneous and exothermic reaction. The material characterization, before and after adsorption, shows that CoFe₂O₄@SiO₂-EDTA has excellent recyclability, hydrothermal stability and fully biodegradable properties. To summarize, it is a potential adsorption material for removing heavy metals from aqueous solutions in practical applications.