Wastewater treatment using plant-derived bioflocculants: green chemistry approach for safe environment

Multi-functional copper oxide nanoparticles synthesized using Lagerstroemia indica leaf extracts and their applications

Developing multifunctional nanomaterials through environmentally friendly and efficient approaches is a pivotal focus in nanotechnology. This study aimed to employ a biogenic method to synthesize multifunctional copper oxide nanoparticles (LI-CuO NPs) with diverse capabilities, including antibacterial, antioxidant, and seed priming properties, as well as photocatalytic organic dye degradation and wastewater treatment potentials using Lagerstroemia indica leaf extract. The synthesized LI-CuO NPs were extensively characterized using UV-vis spectroscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform-infrared spectroscopy (FT-IR). The colloid displayed surface plasmon resonance peaks at 320 nm, characteristic of LI-CuO NPs. DLS analysis revealed an average particle size of 93.5 nm and a negative zeta potential of -20.3 mV. FTIR and XPS analyses demonstrated that LI-CuO NPs possessed abundant functional groups that acted as stabilizing agents. XRD analysis indicated pure crystalline and spherical LI-CuO NPs measuring 36 nm in size. Antibacterial tests exhibited significant differential activity of LI-CuO NPs against both gram-negative (Escherichia coli, Salmonella typhimurium) and gram-positive (Staphylococcus aureus and Listeria monocytogenes) bacteria. In antioxidant tests, the LI-CuO NPs demonstrated a remarkable radical scavenging activity of 97.6 % at a concentration of 400 μg mL-1. These nanoparticles were also found to enhance mustard seed germination at low concentrations. With a remarkable reusability, LI-CuO NPs exhibited excellent photocatalytic performance, with a degradation efficiency of 97.6 % at 150 μg/mL as well as a 95.6 % reduction in turbidity when applied to wastewater treatment. In conclusion, this study presents environmentally friendly method for the facile synthesis of LI-CuO NPs that could potentially offer promising applications in biomedicine, agriculture, and environmental remediation due to their multifunctional properties.

Green Synthesis, Characterization and Application of Silver Nanoparticles Using Bioflocculant: A Review

Nanotechnology has emerged as an effective means of removing contaminants from water. Traditional techniques for producing nanoparticles, such as physical methods (condensation and evaporation) and chemical methods (oxidation and reduction), have demonstrated high efficiency. However, these methods come with certain drawbacks, including the significant energy requirement and the use of costly and hazardous chemicals that may cause nanoparticles to adhere to surfaces. To address these limitations, researchers are actively developing alternative procedures that are cost-effective, environmentally safe, and user-friendly. One promising approach involves biological synthesis, which utilizes plants or microorganisms as reducing and capping agents. This review discusses various methods of nanoparticle synthesis, with a focus on biological synthesis using naturally occurring bioflocculants from microorganisms. Bioflocculants offer several advantages, including harmlessness, biodegradability, and minimal secondary pollution. Furthermore, the review covers the characterization of synthesized nanoparticles, their antimicrobial activity, and cytotoxicity. Additionally, it explores the utilization of these NPs in water purification and dye removal processes.

Carbon redirection in chemically enhanced primary treatment of domestic wastewater: A meta-analysis of laboratory to full-scale trials

Increasing energy demands combined with local scarcities and rising prices make the valorisation of energy from domestic wastewater seen as a valuable resource. Chemically enhanced primary treatment (CEPT) enables an increased redirection of organic compounds into sludge in the primary stage of a wastewater treatment for a transformation into biogas (carbon capture). Traditionally used coagulants consist of metallic salts, but in the last two decades, the development of polymers, based on petroleum or synthesized from renewable sources such as plants, has been intensified. However, a direct comparison of the effectiveness of these products is missing. In this paper, we analysed data of peer-reviewed research from jar tests to full-scale studies, highlighting key parameters for successful carbon capture. More than 100 studies were identified, with a majority presenting results from tests under static conditions (jar tests), while data on full-scale applications are scarce. Overall, for TSS and COD, a clear correlation between inflow concentration and removal efficiency was found, irrespective of the product used. Comparison between the effectiveness of the different types of products is difficult, but bio-based coagulants need to be generally added in higher product concentrations for a considerable removal efficiency. While CEPT seems to increase the general sludge and biogas output, future studies should focus on harmonising laboratory analysis to make results comparable. Another important issue that should be addressed is the provision of experimental details, especially for full-scale trials, to enable for reliable conclusions.

Parametric study of novel plant-based seed coagulant in modeled wastewater turbidity removal

Chemical coagulants like alum, ferric salts, and polyacrylamide derivatives are helpful in water treatment. However, the long-term detrimental effects of chemical coagulants on humans and the environment require alternative research for natural coagulants. This study used novel leguminous (green beans (GB), pigeon pea (PP)), fruit seeds (Tamarind indica (TI), and date palm (DS)) as coagulants to remove turbidity. The seeds were powdered, and the crude active coagulants were extracted with distilled water and a 1 M NaCl solution. The result showed that PP's distilled water extract had the highest turbidity removal of 81.12%, while DS had the least performance of 62.54%. The NaCl extract of PP had the highest removal (94.62%), followed by TI (76.08%). This study found the optimum doses for GB, TI, PP, and DS to be 50, 40, 10, and 70 mL/L, with their optimum pH at 3, 1, 3, and 1, respectively. The FTIR spectra confirmed the existence of -OH, -NH, COOH, C = O, C-C, and C-H peaks, indicating the presence of protein-specific functional groups supporting their potential use as coagulants. Therefore, PP would have been used based on turbidity performance; however, due to their nutritional value, TI and DS are suitable seeds for the coagulation-flocculation treatment of turbid water because they are waste materials.

Natural-based coagulants/flocculants as sustainable market-valued products for industrial wastewater treatment: a review of recent developments

Industrial wastewater is categorized as a voracious consumer of fresh water and a high-strength source of pollution. Coagulation-flocculation is a simple and cost-effective technique for removing organic/inorganic compounds and colloidal particles from industrial effluents. Despite the outstanding natural properties, biodegradability, and efficacy of natural coagulants/flocculants (NC/Fs) in industrial wastewater treatment, their significant potential to remediate such effluents is underappreciated, particularly in commercial scale applications. Most reviews on NC/Fs focused on the possible application of plant-based sources such as plant seeds, tannin, certain vegetables/fruit peels, and their lab-scale potential. Our review expands the scope by examining the feasibility of using natural materials from other sources for industrial effluent decontamination. By analyzing the latest data on NC/Fs, we identify the most promising preparation techniques for making these materials stable enough to compete with traditional options in the marketplace. An interesting presentation of the results of various recent studies has also been highlighted and discussed. Additionally, we highlight the recent success of using magnetic-natural coagulants/flocculants (M-NC/Fs) in treating diverse industrial effluents, and discuss the potential for reprocessing spent materials as a renewable resource. The review also offers different concepts for suggested large-scale treatment systems used by MN-CFs.

Cocoyam powder extracted from Colocasia antiquorum as a novel plant-based bioflocculant for industrial wastewater treatment: Flocculation performance and mechanism

In the current investigation, the comparative study of cocoyam bioflocculant (CYBF) and chemical flocculant for the removal of heavy metals, COD, BOD, TDS, TSS, sulphate and nitrate from tannery effluent, and dyes from synthetic dye wastewater were examined. Different analytical techniques, including Fourier transforms infrared (FTIR), X-ray powder diffraction (XRD), Scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDX), were used to characterise the extracted bioflocculant. FTIR spectral measurement of the bioflocculant demonstrated the presence of hydroxyl, carboxyl, and amino groups. By using bioflocculant, the highest removal of TSS (85.5%), TDS (76.2%), BOD (74%), COD (50.5%), sulphate (54.4%), nitrate (52%), Lead (65%), Chromium (60%), Nickel (57.9%), from tannery effluent was achieved at pH 6 and bioflocculant dosage of 8 mg/L. While, 80% congo red, 79% methyl orange, 73% safranin, and 72% methylene blue were removed from synthetic dye wastewater by cocoyam bioflocculant. Two flocculation mechanisms were found for dye removal, electrostatic force of attraction, and hydrogen bonding. In the case of metal adsorption, only electrostatic interactions were observed between metal ions and functional groups of bioflocculant. The cocoyam bioflocculant exhibited excellent flocculation efficacy and thus can be used in wastewater treatment to remove heavy metals and other pollutants.

Optical Band Gap Tuning, DFT Understandings, and Photocatalysis Performance of ZnO Nanoparticle-Doped Fe Compounds

Iron-doped Zinc oxide nanoparticles were produced by the sol-gel combustion method. This study aims to see how iron doping affects the structural, optical, and photocatalytic characteristics of ZnO composites. XRD examined all samples to detect the structural properties and proved that all active materials are a single hexagonal phase. The morphology and particle size were investigated by TEM. Computational Density functional theory (DFT) calculation of the band structure, density of state, and charge distributions for ZnO were investigated in comparison with ZnO dope iron. We reported the application results of ZnO doped Fe for Methylene blue dye removal under photocatalytic degradation effect. The iron concentrations affect the active material's band gap, producing higher photocatalytic performance. The acquired results could be employed to enhance the photocatalytic properties of ZnO.

Solving urban water microplastics with bacterial cellulose hydrogels: Leveraging predictive computational models

The prevalence of microplastics (MPs) in both urban and aquatic ecosystems is concerning, with wastewater treatment plants being considered one of the major sources of the issue. As the focus on developing sustainable solutions increases, unused remnants from bacterial cellulose (BC) membranes were ground to form BC hydrogels as potential bioflocculants of MPs. The influence of operational parameters such as BC:MPs ratio, hydrogel grinding, immersion and mixing time, temperature, pH, ionic strength, and metal cations on MPs flocculation and dispersion were evaluated. A response surface methodology based on experimental data sets was computed to understand how these parameters influence the flocculation process. Further, both the BC hydrogel and the hetero-aggregation of MPs were characterised by UV-Vis, ATR-FTIR, IGC, water uptake assays, fluorescence, and scanning electron microscopy. These highlights that the BC hydrogel would be fully effective at hetero-aggregating MPs in naturally-occurring concentrations, thereby not constituting a limiting performance factor for MPs' optimal flocculation and aggregation. Even considering exceptionally high concentrations of MPs (2 g/L) that far exceed naturally-occurring concentrations, the BC hydrogel was shown to have elevated MPs flocculation activity (reaching 88.6%: 1.77 g/L). The computation of bioflocculation activity showed high reliability in predicting flocculation performance, unveiling that the BC:MPs ratio and grinding times were the most critical variables modulating flocculation rates. Also, short exposure times (5 min) were sufficient to drive robust particle aggregation. The microporous nature of the hydrogel revealed by electron microscopy is the likely driver of strong MPs bioflocculant activity, far outperforming dispersive commercial bioflocculants like xanthan gum and alginate. This pilot study provides convincing evidence that even BC remainings can be used to produce highly potent and circular bioflocculators of MPs, with prospective application in the wastewater treatment industry.

Determining the performance of lignin-based flocculants in improving biosludge dewaterability

In the wastewater treatment plant of pulp and paper mills, biosludge dewatering is needed to reduce the sludge handling and disposal costs. It is usually facilitated by means of the addition of synthetic polymers. There is increasing interest in replacing synthetic polymers with biopolymers derived from low value by-products or industrial residuals to improve the environmental footprint of dewatering. In this study, lignin-based flocculants (LBF) were tested for their ability to improve the biosludge dewaterability based on Capillary Suction Time (CST) and dry cake solids achieved with a Crown Press. The results demonstrate that LBFs alone can significantly enhance dewatering with a decrease in CSTs from 72.7 ± 5.1 s (unconditioned biosludge) to 23.3 ± 0.4 s and an increase in dry cake solids after pressing from 7.1 ± 0.5% to 13.9 ± 1.3% with a relatively high dosage of 7.5% w/w. However, with dual conditioning a LBF and 0.1% w/w anionic polyacrylamide (APAM), the required dosage of LBF was reduced to 3% w/w to achieve a dry cake solids content of 13.8 ± 0.4%, the same as that achieved with Zetag8165, a commercial synthetic polymer. LBF addition lowered the particle surface charge, allowing the particles to agglomerate and enhancing for the biosludge dewaterability. The application of LBFs for sludge dewatering offers novel considerable promise for providing more sustainable approaches by optimizing the use of lignin from different extraction processes, applying various types of lignin modifications in combination with anionic polymers, and exploring different methods of disposal or utilization of the dewatered sludge.

Exploring the extraction methods for plant-based coagulants and their future approaches

The application of plant-based coagulants in wastewater treatment has increasingly progressed in the coagulation-flocculation process toward green economy and cleaner production. Plant-based coagulants have a potential as essential substitutes for commercially used chemical coagulants because of their natural characteristics and biodegradability. Chemical coagulants leave residues in treated water and generated sludge, which cause harm to human health and the ecosystem. Thus, the exploration of plant-based coagulants in wastewater treatment could reduce and eliminate the potential damage of chemical coagulants and promote the alternative approach for sustainable environment. The general processing steps of the end-to-end plant-based coagulant production, which includes primary, secondary, and tertiary stages, are discussed. However, this review focuses more on the extraction process using different solutions and compares the performance of different coagulants in removal activities after effluent treatment. Discussion on the arising challenges is elaborated, and approaches for plant-based coagulant research in the near future are suggested.

Molecular Interactions Associated with Coagulation of Organic Pollutants by 2S Albumin of Plant Proteins: A Computational Approach

The removal of organic pollutants is a major challenge in wastewater treatment technologies. Coagulation by plant proteins is a promising technique for this purpose. The use of these proteins has been experimentally investigated and reported in the literature. However, the determination of the molecular interactions of these species is experimentally challenging and the computational approach offers a suitable alternative in gathering useful information for this system. The present study used a molecular dynamic simulation approach to predict the potentials of using Moringa oleifera (MO), Arachis hypogaea, Bertholletia excelsa, Brassica napus, and Helianthus annuus plant proteins for the coagulation of organic pollutants and the possible mechanisms of coagulation of these proteins. The results showed that the physicochemical and structural properties of the proteins are linked to their performance. Maximum coagulation of organic molecules to the proteins is between 50–100%. Among five proteins studied for coagulation, Brassica napus and Helianthus annuus performed better than the well-known MO protein. The amino acid residues interacting with the organic molecules play a significant role in the coagulation and this is peculiar with each plant protein. Hydrogen bond and π—interactions dominate throughout the protein–pollutants molecular interactions. The reusability of the proteins after coagulation derived from their structural quality analysis along with the complexes looks promising and most of them are better than that of the MO. The results showed that the seed proteins studied have good prediction potentials to be used for the coagulation of organic pollutants from the environment, as well as the insights into their molecular activities for bioremediation.