Synthesis of superparamagnetic nanotubes as MRI contrast agents and for cell labeling

Fabrication of Polysaccharide-Based Halochromic Nanofibers via Needle-Less Electrospinning and Their Characterization: A Study of the Leaching Effect

Responsive materials, i.e., smart materials, have the ability to change their physical or chemical properties upon certain external signals. The development of nanofibrous halochromic materials, specifically combining the pH-sensitive functionality and unique nanofiber properties, could yield interesting new applications, especially when the common problem of dye leaching is successfully tackled. Therefore, in this article, we studied the fabrication process of polysaccharide-based halochromic nanofibrous materials by using a combination of various halochromic dyes (bromothymol blue, bromocresol green, and thymol blue) and cellulose acetate in a spinning solution using a one-pot strategy. The inhibition of leaching was addressed by using a complexing agent: poly-diallyl-dimethylammonium chloride (PDADMAC). The preparation of hybrid spinning solutions, their characterization, and ability to form continuous nanofibers were studied using a high production needle-less electrospinning system. The produced hybrid solutions and nanofibers were characterized, in terms of their rheological properties, chemical structure, morphology, and functionality. Fabricated nanofibrous halochromic structures show a clear color change upon exposure to different pH values, as well as the reduced leaching of dyes, upon the addition of a complexing agent. The leaching decreased by 61% in the case of bromocresol green, while, in the case of bromothymol blue and thymol blue, the leaching was reduced by 95 and 99%, respectively.

Application of Higher Density Iron Oxide Nanoparticle Pellicles to Enrich the Plasma Membrane and Its Proteome from Cells in Suspension

Enrichment of the plasma membrane represents one valuable method to characterize the surfaceome, along with other plasma membrane and structural proteins. Currently, the overlapping densities of many subcellular organelles hinder enrichment of the plasma membrane by centrifugation. However, external access to the plasma membrane of intact cells allows the attachment of a nanoparticle pellicle to enhance its density and facilitate enrichment. We describe the synthesis of iron oxide nanoparticles, attachment of the pellicle to suspended cells, and recovery of plasma membrane proteins for proteomic analysis.

Peptide-based systems analysis of inflammation induced myeloid-derived suppressor cells reveals diverse signaling pathways

A better understanding of molecular signaling between myeloid-derived suppressor cells (MDSC), tumor cells, T-cells, and inflammatory mediators is expected to contribute to more effective cancer immunotherapies. We focus on plasma membrane associated proteins, which are critical in signaling and intercellular communication, and investigate changes in their abundance in MDSC of tumor-bearing mice subject to heightened versus basal inflammatory conditions. Using spectral counting, we observed statistically significant differential abundances for 35 proteins associated with the plasma membrane, most notably the pro-inflammatory proteins S100A8 and S100A9 which induce MDSC and promote their migration. We also tested whether the peptides associated with canonical pathways showed a statistically significant increase or decrease subject to heightened versus basal inflammatory conditions. Collectively, these studies used bottom-up proteomic analysis to identify plasma membrane associated pro-inflammatory molecules and pathways that drive MDSC accumulation, migration, and suppressive potency.

Amalgamation of complex iron(III) ions and iron nanoclusters with MWCNTs as a route to potential T2 MRI contrast agents

Iron-filled multiwall carbon nanotubes (Fe@MWCNTs) were functionalized toward a variety of potential magnetic resonance imaging contrast agents. Oxidized Fe@MWNCTs were covered with PEG5000 via direct esterification or using acyl chloride derivatives. Alternatively, the latter were functionalized with an aminophenol ligand (Fe@O-MWCNT-L). Moreover, pristine Fe@MWCNTs were functionalized with N-phenylaziridine groups (Fe@f-MWCNT) via [2+1] cycloaddition of nitrene. All of these chemically modified nanotubes served as a vehicle for anchoring Fe³⁺ ions. The new hybrids – Fe(III)/Fe@(f-/O-)MWCNTs – containing 6%–14% of the “tethered” Fe³⁺ions were studied in terms of the acceleration of relaxation of water protons in nuclear magnetic resonance. The highest transverse relaxivity r₂=63.9±0.9 mL mg⁻¹ s⁻¹ was recorded for Fe(III)/Fe@O-MWCNT-L, while for Fe(III)/Fe@f-MWCNT, with r₂=57.9±2.9 mL mg⁻¹ s⁻¹, the highest impact of the anchored Fe(III) ions was observed. The T₁/T₂ ratio of 30–100 found for all of the nanotube hybrids presented in this work is a very important factor for their potential application as T₂ contrast agents. Increased stability of the hybrids was confirmed by ultraviolet–visible spectrophotometry.

Current trends in magnetic particle enrichment for mass spectrometry-based analysis of cardiovascular protein biomarkers

Magnetic particles have traditionally been utilized to isolate and enrich various cardiovascular protein biomarkers for mass spectrometry-based proteomic analysis. The application of functionalized magnetic particles for immunocapture is attractive due to their easy manipulation, large surface area-to-volume ratios for maximal antibody binding, good recovery and high magnetic saturation. Magnetic particle enrichment coupled with mass spectrometry can act as a complementary tool for clinical sandwich-immunoassay development since it can provide improved target specificity and true metrological traceability. The purpose of this review is to summarize current separation methods and technologies that use magnetic particles to enrich protein biomarkers from complex matrices, specifically focusing on cardiovascular disease-related proteins and the advantages of magnetic particles over existing techniques.

Fabrication and modification of composite silica nano test tubes for targeted drug delivery

Drug containing composite silica nano test tubes were fabricated within alumina template membranes, and upon liberation, modified with targeting moieties to specifically kill cancer cells.

Enrichment of plasma membrane proteins using nanoparticle pellicles: comparison between silica and higher density nanoparticles

Proteomic and other characterization of plasma membrane proteins is made difficult by their low abundance, hydrophobicity, frequent carboxylation, and dynamic population. We and others have proposed that underrepresentation in LC-MS/MS analysis can be partially compensated by enriching the plasma membrane and its proteins using cationic nanoparticle pellicles. The nanoparticles increase the density of plasma membrane sheets and thus enhance separation by centrifugation from other lysed cellular components. Herein, we test the hypothesis that the use of nanoparticles with increased densities can provide enhanced enrichment of plasma membrane proteins for proteomic analysis. Multiple myeloma cells were grown and coated in suspension with three different pellicles of three different densities and both pellicle coated and uncoated suspensions analyzed by high-throughput LC-MS/MS. Enrichment was evaluated by the total number and the spectral counts of identified plasma membrane proteins.

Hybrid nanoparticles for detection and treatment of cancer

There is currently considerable effort to incorporate both diagnostic and therapeutic functions into a single nanoscale system for the more effective treatment of cancer. Nanoparticles have great potential to achieve such dual functions, particularly if more than one type of nanostructure can be incorporated in a nanoassembly, referred to in this review as a hybrid nanoparticle. Here we review recent developments in the synthesis and evaluation of such hybrid nanoparticles based on two design strategies (barge vs. tanker), in which liposomal, micellar, porous silica, polymeric, viral, noble metal, and nanotube systems are incorporated either within (barge) or at the surface of (tanker) a nanoparticle. We highlight the design factors that should be considered to obtain effective nanodevices for cancer detection and treatment.

Nanodetoxification: emerging role of nanomaterials in drug intoxication treatment

Treatment for intoxication involves the neutralization or clearance of a toxic compound, but the current methods of treatment are limited in their ability to safely and effectively detoxify the patient. Emerging research has focused on using nanoparticles as parenteral detoxifying agents to circulate through the body and capture toxins. The variable compositions of these nanoparticles control the mechanism in which they capture and remove specific compounds. As discussed in this article, the recent methods for utilizing nanoparticles for detoxification show great potential for intoxication treatment. However, several challenges must be overcome before a universal nanoparticle detoxification method is available for clinical use.

Experimental considerations on the cytotoxicity of nanoparticles

Engineered nanoparticles are one of the leading nanomaterials currently under investigation due to their applicability in various fields, including drug and gene delivery, biosensors, cancer treatment and diagnostic tools. Moreover, the number of commercial products containing nanoparticles released on the market is rapidly increasing. Nanoparticles are already widely distributed in air, cosmetics, medicines and even in food. Therefore, the unintended adverse effect of nanoparticle exposure is a growing concern both academically and socially. In this context, the toxicity of nanoparticles has been extensively studied; however, several challenges are encountered due to the lack of standardized protocols. In order to improve the experimental conditions of nanoparticle toxicity studies, serious consideration is critical to obtain reliable and realistic data. The cell type must be selected considering the introduction route and target organ of the nanoparticle. In addition, the nanoparticle dose must reflect the realistic concentration of nanoparticles and must be loaded as a well-dispersed form to observe the accurate size- and shape-dependent effect. In deciding the cytotoxicity assay method, it is important to choose the appropriate method that could measure the toxicity of interest without the false-negative or -positive misinterpretation of the toxicity result.

Superparamagnetic nanosystems based on iron oxide nanoparticles for biomedical imaging

Magnetic iron oxide nanoparticles and their dispersion in various mediums are of wide interest for their biomedical applications and physicochemical properties. MFe2O4 or MOFe2O3 (where M = Co, Li, Ni or Mn, for example) can be molecularly engineered to provide a wide range of magnetic properties. In this article, we survey the literature, integrating the results of our work to give a rational view on the synthesis, physicochemical properties and applications of MFe2O4, especially for MRI. However, retrieving detailed biological information on a subcellular level is difficult, owing to the limited resolution and low sensitivity of the MRI technique. Thus, this article also concentrates on the development of a magnetic iron oxide nanoparticles/quantum dot hybrids, as a dual-mode magnetic-fluorescent probe. The synthesis and physicochemical properties of the magnetic iron oxide nanoparticles/quantum dot hybrids and, especially, its application as an MRI-fluorescent probe, will also be described.

Multiwall carbon nanotubes as MRI contrast agents for tracking stem cells

In this study we investigate the potential of multiwall carbon nanotubes (MWCNTs) with low metal impurities (2.57% iron) as magnetic resonance imaging (MRI) contrast agents. Taking into account probable aggregation at high MWCNTs concentration analysis shows that the r(2) relaxivity of MWCNTs in 1% agarose gels at 19 °C is 564 ± 41 s(-1) mM(-1); this is attributed to both the presence of iron oxide impurities and also to the carbon MWCNT structure itself. Stem cells were labelled with MWCNTs to demonstrate the effectiveness of MWCNTs as MRI contrast agents for cellular MRI. The MWCNTs did not impair cell viability or proliferation. These results suggest that the MRI contrast agent properties of the MWCNTs could be used in vivo for stem cell tracking/imaging and during MWCNT-mediated targeted electro-chemotherapy of tumours.

Biocompatibility and Delivery of NGF by Hematite Nanotubes for Differentiation of PC12 Cells

This report discusses the compatibility of hematite nanotubes with PC12 cells and the use of these hematite nanotubes to deliver nerve growth factor (NGF) for the differentiation and growth of PC12 cells. The hematite nanotubes used in this work were synthesized using template-assisted thermal decomposition method, followed by dissolving the template. The synthesized hematite nanotubes have a diameter around 200 nm and an average length of about 10 μm, and they have a low coercivity (about 10 Oe) at room temperature. To study the biocompatibility of hematite nanotubes, PC12 cells were cultured in the presence of hematite nanotubes. Neurite (axon and dendrite) outgrowth, formation of morphological connections, and close contacts between PC12 cells and hematite nanotubes unequivocally confirmed the biocompatibility of hematite nanotubes. The efficiency of hematite nanotubes to bind with NGF and the ability of the NGF-incorporated hematite nanotubes to release the bound NGF were also investigated. It is found that NGF-incorporated hematite nanotubes enabled the differentiation of PC12 cells into neurons, and the filopodia extending from growth cones were in close proximity to the NGF-incorporated hematite nanotubes, at times appearing to extend toward or into them. These observations indicate that hematite nanotubes can be used as a vehicle for NGF delivery. This research paves the way toward developing potential treatments using magnetic nanotubes with incorporated growth factors for neurodegenerative disorders and injuries to the nervous system in the future.

Characterizing proton relaxation times for metallic and magnetic layer-by-layer-coated, DNA-templated nanoparticle chains

Metallic and superparamagnetic DNA-templated nanoparticle (NP) chains are examined as potential imaging agents. Proton relaxation times (T(1) and T(2)) are measured for DNA nanostructures using nuclear magnetic resonance (NMR) spectroscopy. The layer-by-layer (LBL) method was used to encapsulate the DNA-templated NP chains and demonstrated a change in proton relaxation times. Results from this study suggest that LBL-coated, DNA-templated nanostructures can serve as effective imaging agents for magnetic resonance imaging (MRI) applications.

Development and use of iron oxide nanoparticles (Part 1): Synthesis of iron oxide nanoparticles for MRI

Contrast agents, such as iron oxide, enhance MR images by altering the relaxation times of tissues in which the agent is present. They can also be used to label targeted molecular imaging probes. Unfortunately, no molecular imaging probe is currently available on the clinical MRI market. A promising platform for MRI contrast agent development is nanotechnology, where superparamagnetic iron oxide nanoparticles (SPIONS) are tailored for MR contrast enhancement, and/or for molecular imaging. SPIONs can be produced using a range of methods and the choice of method will be influenced by the characteristics most important for a particular application. In addition, the ability to attach molecular markers to SPIONS heralds their application in molecular imaging.There are many reviews on SPION synthesis for MRI; however, these tend to be targeted to a chemistry audience. The development of MRI contrast agents attracts experienced researchers from many fields including some researchers with little knowledge of medical imaging or MRI. This situation presents medical radiation practitioners with opportunities for involvement, collaboration or leadership in research depending on their level of commitment and their ability to learn. Medical radiation practitioners already possess a large portion of the understanding, knowledge and skills necessary for involvement in MRI development and molecular imaging. Their expertise in imaging technology, patient care and radiation safety provides them with skills that are directly applicable to research on the development and application of SPIONs and MRI.In this paper we argue that MRI SPIONs, currently limited to major research centres, will have widespread clinical use in the future. We believe that knowledge about this growing area of research provides an opportunity for medical radiation practitioners to enhance their specialised expertise to ensure best practice in a truly multi-disciplinary environment. This review outlines how and why SPIONs can be synthesised and examines their characteristics and limitations in the context of MR imaging.

Shape-coded silica nanotubes for multiplexed bioassay: rapid and reliable magnetic decoding protocols

AIMS

The recent development of 1D barcode arrays has proved their capabilities to be applicable to highly multiplexed bioassays. This article introduces two magnetic decoding protocols for suspension arrays of shape-coded silica nanotubes to process multiplexed assays rapidly and easily, which will benefit the minimization and automation of the arrays.

METHODS

In the first protocol, the magnetic nanocrystals are incorporated into the inner voids of barcoded silica nanotubes in order to give the nanotubes magnetic properties. The second protocol is performed by trapping the barcoded silica nanotubes onto streptavidin-modified magnetic beads.

RESULTS

The rapid and easy decoding process was demonstrated by applying the above two protocols to multiplexed assays, resulting in high selectivity. Furthermore, the magnetic bead-trapped barcode nanotubes provided a great opportunity to exclude the use of dye molecules in multiplexed assays by using barcode nanotubes as signals.

CONCLUSION

The rapid and easy manipulation of encoded carriers using magnetic properties could be used to develop promising suspension arrays for portable bioassays.

Water-dispersible, multifunctional, magnetic, luminescent silica-encapsulated composite nanotubes

A multifunctional one-dimensional nanostructure incorporating both CdSe quantum dots (QDs) and Fe(3)O(4) nanoparticles (NPs) within a SiO(2)-nanotube matrix is successfully synthesized based on the self-assembly of preformed functional NPs, allowing for control over the size and amount of NPs contained within the composite nanostructures. This specific nanostructure is distinctive because both the favorable photoluminescent and magnetic properties of QD and NP building blocks are incorporated and retained within the final silica-based composite, thus rendering it susceptible to both magnetic guidance and optical tracking. Moreover, the resulting hydrophilic nanocomposites are found to easily enter into the interiors of HeLa cells without damage, thereby highlighting their capability not only as fluorescent probes but also as possible drug-delivery vehicles of interest in nanobiotechnology.

Cellular uptake and cytotoxicity of silica nanotubes

"Template synthesized" silica nanotubes (SNTs) provide unique features such as end functionalization to control drug release, inner voids for loading biomolecules, and distinctive inner and outer surfaces that can be differentially functionalized for targeting and biocompatibility. Very limited information is available about their biological interactions. This work evaluates the influence of size and surface charge of SNTs on cellular toxicity and uptake. Results additionally indicate endocytosis to be one possible mechanism of internalization of SNTs.