Porous metal organic framework nanoparticles to address the challenges related to busulfan encapsulation

Progress in the Elimination of Organic Contaminants in Wastewater by Activation Persulfate over Iron-Based Metal-Organic Frameworks

The release of organic contaminants has grown to be a major environmental concern and a threat to the ecology of water bodies. Persulfate-based Advanced Oxidation Technology (PAOT) is effective at eliminating hazardous pollutants and has an extensive spectrum of applications. Iron-based metal-organic frameworks (Fe-MOFs) and their derivatives have exhibited great advantages in activating persulfate for wastewater treatment. In this article, we provide a comprehensive review of recent research progress on the significant potential of Fe-MOFs for removing antibiotics, organic dyes, phenols, and other contaminants from aqueous environments. Firstly, multiple approaches for preparing Fe-MOFs, including the MIL and ZIF series were introduced. Subsequently, removal performance of pollutants such as antibiotics of sulfonamides and tetracyclines (TC), organic dyes of rhodamine B (RhB) and acid orange 7 (AO7), phenols of phenol and bisphenol A (BPA) by various Fe-MOFs was compared. Finally, different degradation mechanisms, encompassing free radical degradation pathways and non-free radical degradation pathways were elucidated. This review explores the synthesis methods of Fe-MOFs and their application in removing organic pollutants from water bodies, providing insights for further refining the preparation of Fe-MOFs.

Engineering of surface-modified CuBTC-MXene nanocarrier for adsorption and co-loading of curcumin/paclitaxel from aqueous solutions for synergistic multi-therapy of cancer

Two-dimensional (2D) nanomaterials can improve drug delivery by reducing toxicity, increasing bioavailability and boosting efficacy. In this study, the simultaneous use of transition metal carbides and nitrides (MXenes) along with copper (II) benzene-1, 3, 5-tricarboxylate metal-organic framework (Cu - BTC/MOF) as attractive nanocarriers are investigated for loading and delivering curcumin (CUR) and paclitaxel (PTX) drugs to cancer cells. The efficiency of surface termination (bare and oxygen) in the adsorption of PTX and CUR drugs and the co-loading of these two drugs are evaluated. Our results show that the strongest interaction energy belongs to the adsorption of drug CUR on the MXNNO-Cu-BTC adsorbent, while the interaction of PTX drug with the MXNO- Cu-BTC in the MXNO-Cu-BTC/PTX&CUR system is the lowest due to the particular structure of the drug and the adsorbent. Our results show that at the beginning simulation, the interaction energy between the PTX drug and water in PTX/MXN system is -4645.48 kJ/mol, which reduces to -3848.71 kJ/mol after the system reaches equilibrium. Therefore, the inspected adsorbents have a good performance in adsorbing CUR and PTX drugs. The obtained results from this investigation provide valuable information about experimental studies by medical scientists in the future.Communicated by Ramaswamy H. Sarma.

An Fe-organic framework/arginine-glycine-aspartate peptide-modified sensor for electrochemically detecting nitric oxide released from living cells

Nitric oxide (NO) is a crucial cell-signaling molecule utilized in numerous physiological and pathological processes. Monitoring cellular levels of NO requires a sensor with sufficient sensitivity, transient recording capability, and biocompatibility. Owing to the large surface area and high catalytic activity of the metal-organic framework, Fe-BTC was used for the modification of screen-printed electrodes (SPEs). This study investigates the electrochemical sensing of NO on modified SPEs. Additionally, the introduction of a cell-adhesive molecule, arginine-glycine-aspartate peptide (RGD), considerably improved the cytocompatibility, resulting in superior cell attachment and growth on the SPE. The Fe-BTC/RGD-modified SPE (Fe-BTC/RGD/SPE) exhibited electrocatalytic NO oxidation at 0.8 V, demonstrating a linear response with a detection limit of 11.88 nM over a wide concentration range (0.17-47.37 μM) and a response time of approximately 0.9 s. Subsequently, the as-obtained Fe-BTC/RGD/SPE was successfully utilized for the real-time detection of NO released from human endothelial cells cultured on the electrode. Therefore, the study undertaken shows remarkable potential of Fe-BTC/RGD/SPE for practical applications in biological processes and clinical diagnostics.

Metal-organic framework based drug delivery systems as smart carriers for release of poorly soluble drugs hydrochlorothiazide and dapsone

Drug delivery systems (DDSs) that are derived from biocompatible carriers are attractive platforms for sustained release of drugs. In particular, sustained and controlled release of poorly soluble BCS (Biopharmaceutics Classification System) class IV drugs is important and this requires the development of new DDSs. In this work, we exploit two porous metal-organic frameworks (MOFs) MIL-100(Fe) and MIL-53(Fe) as carriers/DDSs for the release of two BCS class IV drugs hydrochlorothiazide (HCT) and dapsone (DAP). The chosen MOFs are known to possess good physicochemical stability and we realized high drug loading capacity that is attributed to the high porosity of the MOFs. The drug-encapsulated MOFs were characterized thoroughly and our results show ∼23.1% loading of HCT in MIL-100(Fe) and ∼27.6% loading of DAP in MIL-Fe(53), respectively. The release study of these drugs was carried out under simulated physiological conditions that shows sustained release of the drug molecules from the MOFs up to 72 h. Cell viability studies through MTT assays show insignificant cytotoxicity signalling biocompatibility of the proposed DDSs. Our investigations suggest MIL-100(Fe) and MIL-53(Fe) are potential DDSs for enhancing the performance of poorly soluble drugs HCT and DAP.

Nanoscale MOFs in nanomedicine applications: from drug delivery to therapeutic agents

Metal-organic frameworks (MOFs) hold great promise for widespread applications in biomedicine and nanomedicine. MOFs are one of the most fascinating nanocarriers for drug delivery, benefiting from their high porosity and facile modification. Furthermore, the tailored components of MOFs can be therapeutic agents for various treatments, including drugs as organic ligands of MOFs, active metal as central metal ions of MOFs, and their combinations as carrier-free MOF-based nanodrug. In this review, the advances in delivery systems and applications as therapeutic agents for nanoscale MOF-based materials are summarized. The challenges of MOFs in clinical translation and the future directions in the field of MOFs therapy are also discussed. We hope that more researchers will focus their attention on advancing and translating MOF-based nanodrugs into pre-clinical and clinical applications.

Biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) as biocompatible microcapsules with extended release for busulfan and montelukast

An extended release dosage form based on encapsulating the challenging drug busulfan within microspheres of the biodegradable, biocompatible and biosynthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) polyester was achieved. The used (PHBV) polymer was biosynthesized by the halophilic archaeon Haloferax mediterranei from date waste biomass as feed-stock. PHBV microspheres of 1.2-2.1 μm diameter were successfully fabricated and loaded with busulfan with an encapsulation efficiency of 29.2 ± 0.2%. In addition, PHBV microspheres of 1.5-3.5 μm diameter and loaded with montelukast sodium (MK) drug were also fabricated with an encapsulation efficiency of 16.0 ± 0.4%. The double-emulsion solvent evaporation method was used to fabricate the drug-loaded microspheres. The drug-loaded microspheres have been characterized by XRD, FTIR and SEM, and confirmed to be successfully fabricated. The drugs in vitro release profiles have shown extended release for up to 3 days in case of busulfan and 8 h in case of montelukast sodium. The in vitro release profiles for busulfan and montelukast suggest that these drug-loaded microcapsules can be efficiently used as new dosage forms to solve the current issues of busulfan administration protocols, and to introduce a new dosage form for montelukast with extended release performance.

Evaluation of Metal-Organic Framework MIL-89 nanoparticles toxicity on embryonic zebrafish development

Metal-Organic Framework MIL-89 nanoparticles garnered remarkable attention for their widespread use in technological applications. However, the impact of these nanomaterials on human and environmental health is still limited, and concerns regarding the potential risk of exposure during manipulation is constantly rising. Therefore, the extensive use of nanomaterials in the medical field necessitates a comprehensive assessment of their safety and interaction with different tissues of the body system. In this study, we evaluated the systemic toxicity of nanoMIL-89 using Zebrafish embryos as a model system to determine the acute developmental effect. Zebrafish embryos were exposed to a range of nanoMIL-89 concentrations (1 - 300 µM) at 4 h post-fertilization (hpf) for up to 120 hpf. The viability and hatching rate were evaluated at 24-72 hpf, whereas the cardiac function was assessed at 72 and 96 hpf, and the neurodevelopment and hepatic steatosis at 120 hpf. Our study shows that nanoMIL-89 exerted no developmental toxicity on zebrafish embryos at low concentrations (1-10 µM). However, the hatching time and heart development were affected at high concentrations of nanoMIL-89 (> 30 µM). Our findings add novel information into the available data about the in vivo toxicity of nanoMIL-89 and demonstrate its innocuity and safe use in biological, environmental, and medical applications.

Effectiveness of 5-Fluorouracil and gemcitabine hydrochloride loaded iron‑based chitosan-coated MIL-100 composite as an advanced, biocompatible, pH-sensitive and smart drug delivery system on breast cancer therapy

This study was planned to evolve the bioavailability and therapeutic efficiency of Gemcitabine (GEM) and 5-Fluorouracil with decreased side effects using MIL-100 nano-composite as carrier. Impregnation approach was used for encapsulation of 5-Fluorouracil alone and with GEM inside the MIL-100. The formed 5-Fluorouracil@MIL-100 and 5-Fluorouracil-GEM@MIL-100 were then coated with chitosan, sequentially chelated with iron(III) and conjugated with quercetin, eventually obtaining a multifunctional MIL-100 nanocarrier. The hybrid nanocarrier nascency was verified by different characterization results. pH-sensitive releases of 5-Fluorouracil and GEM were observed because of the inherent pH-dependent stability of MIL-100. Additionally, we evaluated the anti-cancer activity of these nanocarriers through WST-1 analysis and acridine orange staining in MCF-7 human breast cancer and HUVEC control cell lines. Our findings showed that all nanocarriers exhibited anti-cancer activity and induced apoptosis in MCF-7 cells. However, 5-Fluorouracil@MIL-100 and chitosan-coated 5-Fluorouracil@MIL-100 with quercetin were more effective than other nanocarriers in MCF-7 cells (p < 0.05). Moreover, we observed cytotoxicity in HUVEC cells due to the adverse side effects of chemotherapy drugs. However, chitosan coated nanocarriers with quercetin were less toxic on HUVEC cells at particularly 1 µg/mL. Therefore, MIL-100 could be used for a promising chemotherapeutic drugs delivery and chitosan coated drugs with quercetin could be useful for reducing toxicity on normal cells.

Applications of water-stable metal-organic frameworks in the removal of water pollutants: A review

Because the pollutants produced by human activities have destroyed the ecological balance of natural water environment, and caused severe impact on human life safety and environmental security. Hence the task of water environment restoration is imminent. Metal-organic frameworks (MOFs), structured from organic ligands and inorganic metal ions, are notable for their outstanding crystallinity, diverse structures, large surface areas, adsorption performance, and excellent component tunability. The water stability of MOFs is a key requisite for their possible actual applications in separation, catalysis, adsorption, and other water environment remediation areas because it is necessary to safeguard the integrity of the material structure during utilization. In this article, we comprehensively review state-of-the-art research progress on the promising potential of MOFs as excellent nanomaterials to remove contaminants from the water environment. Firstly, the fundamental characteristics and preparation methods of several typical water-stable MOFs include UiO, MIL, and ZIF are introduced. Then, the removal property and mechanism of heavy metal ions, radionuclide contaminants, drugs, and organic dyes by different MOFs were compared. Finally, the application prospect of MOFs in pollutant remediation prospected. In this review, the synthesis methods and application in water pollutant removal are explored, which provide ways toward the effective use of water-stable MOFs in materials design and environmental remediation.

Porous nanoparticles with engineered shells release their drug cargo in cancer cells

Highly porous nanoscale metal-organic frameworks (nanoMOFs) attract growing interest as drug nanocarriers. However, engineering "stealth" nanoMOFs with poly(ethylene glycol) (PEG) coatings remains a main challenge. Here we address the goal of coating nanoMOFs with biodegradable shells using novel cyclodextrin (CD)-based oligomers with a bulky structure to avoid their penetration inside the open nanoMOF porosity. The PEG chains were grafted by click chemistry onto the CDs which were further crosslinked by citric acid. Advantageously, the oligomers' free citrate units allowed their spontaneous anchoring onto the nanoMOFs by complexation with the iron sites in the top layers. Up to 31 wt% oligomers could be firmly attached by simple incubation with the nanoMOFs in an aqueous medium. Moreover, the anticancer drug doxorubicin (DOX) was successfully entrapped in the core-shell nanoMOFs with loadings up to 41 wt%. High resolution STEM (HR-STEM) showed that the organized crystalline structures were preserved. Remarkably, at the highest loadings, DOX was poorly released out of the nanoMOFs at pH 7.4 (<2% in 2 days). In contrast, around 80% of DOX was released out at pH 4.5 of artificial lysosomal fluid in 24 h. Confocal microscopy investigations showed that the DOX-loaded nanoMOFs penetrated inside Hela cancer cell together with their PEG shells. There, they released the DOX cargo which further diffused inside the nucleus to eradicate the cancer cells.

Metal-organic frameworks for advanced drug delivery

Metal-organic frameworks (MOFs), comprised of organic ligands and metal ions/metal clusters via coordinative bonds are highly porous, crystalline materials. Their tunable porosity, chemical composition, size and shape, and easy surface functionalization make this large family more and more popular for drug delivery. There is a growing interest over the last decades in the design of engineered MOFs with controlled sizes for a variety of biomedical applications. This article presents an overall review and perspectives of MOFs-based drug delivery systems (DDSs), starting with the MOFs classification adapted for DDSs based on the types of constituting metals and ligands. Then, the synthesis and characterization of MOFs for DDSs are developed, followed by the drug loading strategies, applications, biopharmaceutics and quality control. Importantly, a variety of representative applications of MOFs are detailed from a point of view of applications in pharmaceutics, diseases therapy and advanced DDSs. In particular, the biopharmaceutics and quality control of MOFs-based DDSs are summarized with critical issues to be addressed. Finally, challenges in MOFs development for DDSs are discussed, such as biostability, biosafety, biopharmaceutics and nomenclature.

Improving the genistein oral bioavailability via its formulation into the metal-organic framework MIL-100(Fe)

Despite the interesting chemopreventive, antioxidant and antiangiogenic effects of the natural bioflavonoid genistein (GEN), its low aqueous solubility and bioavailability make it necessary to administer it using a suitable drug carrier system. Nanometric porous metal-organic frameworks (nanoMOFs) are appealing systems for drug delivery. Particularly, mesoporous MIL-100(Fe) possesses a variety of interesting features related to its composition and structure, which make it an excellent candidate to be used as a drug nanocarrier (highly porous, biocompatible, can be synthesized as homogenous and stable nanoparticles (NPs), etc.). In this study, GEN was entrapped via simple impregnation in MIL-100 NPs achieving remarkable drug loading (27.1 wt%). A combination of experimental and computing techniques was used to achieve a deep understanding of the encapsulation of GEN in MIL-100 nanoMOF. Subsequently, GEN delivery studies were carried out under simulated physiological conditions, showing on the whole a sustained GEN release for 3 days. Initial pharmacokinetic and biodistribution studies were also carried out upon the oral administration of the GEN@MIL-100 NPs in a mouse model, evidencing a higher bioavailability and showing that this oral nanoformulation appears to be very promising. To the best of our knowledge, the GEN-loaded MIL-100 will be the first antitumor oral formulation based on nanoMOFs studied in vivo, and paves the way to the efficient delivery of nontoxic antitumorals via a convenient oral route.

Breast Cancer Targeting of a Drug Delivery System through Postsynthetic Modification of Curcumin@N3-bio-MOF-100 via Click Chemistry

Metal-organic frameworks (MOFs) offer many opportunities for applications across biology and medicine. Their wide range of chemical composition makes toxicologically acceptable formulation possible, and their high level of functionality enables possible applications as delivery systems for therapeutics agents. Surface modifications have been used in drug delivery systems to minimize their interaction with the bulk, improving their specificity as targeted carriers. Herein, we discuss a strategy to achieve a tumor-targeting drug-loaded MOF using "click" chemistry to anchor functional folic acid (FA) molecules on the surface of N₃-bio-MOF-100. Using curcumin (CCM) as an anticancer drug, we observed drug loading encapsulation efficiencies (DLEs) of 24.02 and 25.64% after soaking N₃-bio-MOF-100 in CCM solutions for 1 day and 3 days, respectively. The success of postsynthetic modification of FA was confirmed by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy (FTIR), and liquid chromatography-mass spectrometry (LC-MS). The stimuli-responsive drug release studies demonstrated an increase of CCM released under acidic microenvironments. Moreover, the cell viability assay was performed on the 4T1 (breast cancer) cell line in the presence of CCM@N₃-bio-MOF-100 and CCM@N₃-bio-MOF-100/FA carriers to confirm its biological compatibility. In addition, a cellular uptake study was conducted to evaluate the targeting of tumor cells.

Iron-Based Metal-Organic Frameworks in Drug Delivery and Biomedicine

Metal-organic frameworks (MOFs) are crystalline materials comprising metal centers and organic linkers that feature structural rigidity and functional flexibility. These attractive materials offer large surface areas, high porosity, and good chemical stability; they have shown promise in chemistry (H₂ separation and catalysis), magnetism, and optics. They have also shown potential for drug delivery following the demonstration in 2006 that chromium-based MOFs can be loaded with ibuprofen. Since then, iron-based MOFs (Fe-MOFs) have been shown to offer high drug loading and excellent biocompatibility. The present review focuses on the synthesis and surface modifications of Fe-MOFs as well as their applications in drug delivery and biomedicine.

Metal-Organic Frameworks for Liquid Phase Applications

In the last two decades, metal-organic frameworks (MOFs) have attracted overwhelming attention. With readily tunable structures and functionalities, MOFs offer an unprecedentedly vast degree of design flexibility from enormous number of inorganic and organic building blocks or via postsynthetic modification to produce functional nanoporous materials. A large extent of experimental and computational studies of MOFs have been focused on gas phase applications, particularly the storage of low-carbon footprint energy carriers and the separation of CO2-containing gas mixtures. With progressive success in the synthesis of water- and solvent-resistant MOFs over the past several years, the increasingly active exploration of MOFs has been witnessed for widespread liquid phase applications such as liquid fuel purification, aromatics separation, water treatment, solvent recovery, chemical sensing, chiral separation, drug delivery, biomolecule encapsulation and separation. At this juncture, the recent experimental and computational studies are summarized herein for these multifaceted liquid phase applications to demonstrate the rapid advance in this burgeoning field. The challenges and opportunities moving from laboratory scale towards practical applications are discussed.

Amino-decorated magnetic metal-organic framework as a potential novel platform for selective removal of chromium (Vl), cadmium (II) and lead (II)

In this work, the -NH₂ functional group via 3-aminopropyltrimethoxysilane (APTMS) was selected to anchor onto the pore surface of magnetic metal organic framework using microwave green chemical process. The prepared nanocomposite was investigated for potential and fast removal of cationic Cd(II), Pb(II) as well as anionic Cr(VI) species via batch adsorption. Six kinetics models were applied in order to examine the adsorption mechanisms; the obtained data confirmed that the investigated metal ions followed the pseudo-second order model. The adsorption processes were fitted to the Langmuir model and the maximum adsorption capacities of cadmium (II), lead (II) and chromium (VI) ions were 693.0, 536.22 and 1092.22 mg g^-1. In addition, thermodynamic study confirmed the endothermic and spontaneous adsorption reactions. The nFe₃O₄@MIL-88A(Fe)/APTMS was easily regenerated and the adsorptive removal values were decreased by only 3% after five consecutive recycling processes. The recovery values from tap water, sea water and wastewater were identified as Cd(II) (98.49, 96.22 and 94.73), Pb(II) (96.88, 93.31 and 91.81) and Cr(VI) (99.69, 98.01 and 95.46), respectively.

Metal-Organic Framework (MOF)-based Nanomaterials for Biomedical Applications

BACKGROUND

Metal-organic frameworks (MOFs), as a new class of porous organic-inorganic crystalline hybrid materials that governed by the self-assembled of metal atoms and organic struts have attracted tremendous attention because of their special properties. Recently, some more documents have reported different types of nanoscale metal-organic frameworks (NMOFs) as biodegradable and physiological pH-responsive systems for photothermal therapy and radiation therapy in the body.

DISCUSSION

In this review paper aims at describing the benefits of using MOF nanoparticles in the field of biomedicine, and putting into perspective their properties in the context of the ones of other NPs. The first section briefly reviews the biomaterial scaffolds of MOFs. The second section presents the main types of stimuli-responsive mechanisms and strategies from two categories: intrinsic (pH, redox state) and extrinsic (temperature, light irradiation and magnetic field) ones. The combinations of photothermal therapy and radiation therapy have been concluded in detail. Finally, clinical applications of MOFs, future challenges and perspectives are also mentioned.

CONCLUSION

This review outlines the most recent advances MOFs design and biomedical applications, from different synthesis to their use as smart drug delivery systems, bioimaging technology or a combination of both.

Assessment of dynamical properties of mercaptopurine on the peptide-based metal-organic framework in response to experience of external electrical fields: a molecular dynamics simulation

In this work, the effect of the external electric field (EF) on the drug delivery performance of peptide-based metal-organic framework (MPF) for 6-mercaptopurine (6-MP) drug is investigated by means of the molecular dynamics (MD) simulations. It is found that the strength interaction of drug molecule with MPF is decreased under the influence of the electric field. In other words, the adsorbed drug molecules have more tendencies for the interaction with the porous nanostructure in the absence of EF. According to the radial distribution function (RDF) patterns, the probability of finding drug molecules in terms of the intermolecular distance with respect to the MPF surface is lowest during the high field strength. As the EF strength increases, the spread of drug molecules around MPF results in high dynamics movement and further more diffusion coefficient of drug molecule in the simulation system. This result emphasizes the weak intermolecular interaction of drug molecules with MPF with the application of EF. Assessment of dynamical properties of 6-mercaptopurine in the presence of EF with various strengths reveals that the applied electric field can act as a trigger on liberation behavior of drug from the porous nanostructure.

Biodegradable polymeric nanoparticles administered in the cerebrospinal fluid: Brain biodistribution, preferential internalization in microglia and implications for cell-selective drug release

Cell-selective drug release in the central nervous system (CNS) holds great promise for the treatment of many CNS disorders but it is still challenging. We previously demonstrated that polymeric nanoparticles (NPs) injected intra-parenchyma in the CNS can be internalized specifically in microglia/macrophages surrounding the injection site. Here, we explored NPs administration in the cerebrospinal fluid (CSF) to achieve a wider spreading and increased cell targeting throughout the CNS; we generated new NPs variants and studied the effect of modifying size and surface charge on NPs biodistribution and cellular uptake. Intra-cerebroventricular administration resulted in prevalent localization of the NPs in proximity to stem-cell niches, such as around the lateral ventricles, the subventricular zone and the rostral migratory stream. NPs internalization occurred preferentially in brain myeloid cells/microglia. We demonstrated that brain biodistribution and extent of internalization in microglia are influenced by NPs dimensions and can be improved by applying a transient disruption of the blood-brain barrier with mannitol, leading to NPs internalization in up to 25% of brain myeloid/microglia cells. A fraction of the targeted cells was positive for markers of proliferation or stained positive for stemness/progenitor-cell markers such as Nestin, c-kit, or NG2. Interestingly, through these newly formulated NPs we obtained controlled and selective release of drugs otherwise difficult to formulate (such as busulfan and etoposide) to the target cells, preventing unwanted side effects and the toxicity obtained by direct brain delivery of the not encapsulated drugs. Overall, these data provide proof of concept of the applicability of these novel NP-based drug formulations for achieving internalization not only in mature microglia but also possibly in more immature myeloid cells in the brain and pave the way for brain-restricted microglia-targeted drug delivery regimens.

Flow field-flow fractionation and multi-angle light scattering as a powerful tool for the characterization and stability evaluation of drug-loaded metal-organic framework nanoparticles

Asymmetric flow field-flow fractionation (AF4) coupled with UV-Vis spectroscopy, multi-angle light scattering (MALS) and refractive index (RI) detection has been applied for the characterization of MIL-100(Fe) nanoMOFs (metal-organic frameworks) loaded with nucleoside reverse transcriptase inhibitor (NRTI) drugs for the first time. Empty nanoMOFs and nanoMOFs loaded with azidothymidine derivatives with three different degrees of phosphorylation were examined: azidothymidine (AZT, native drug), azidothymidine monophosphate (AZT-MP), and azidothymidine triphosphate (AZT-TP). The particle size distribution and the stability of the nanoparticles when interacting with drugs have been determined in a time frame of 24 h. Main achievements include detection of aggregate formation in an early stage and monitoring nanoMOF morphological changes as indicators of their interaction with guest molecules. AF4-MALS proved to be a useful methodology to analyze nanoparticles engineered for drug delivery applications and gave fundamental data on their size distribution and stability. Graphical abstract ᅟ.

Review of computer simulations on anti-cancer drug delivery in MOFs

Metal–organic frameworks (MOFs) have been recently used as potential nanocarrier platforms in biomedical applications such as drug storage and delivery, due to their low toxicity, biodegradability, high internal surface area, widely tunable composition, high payloads and controlled drug release.

(Fe)MIL-100-Met@alginate: a hybrid polymer–MOF for enhancement of metformin's bioavailability and pH-controlled release

Metformin hydrochloride (Met) was combined with iron(iii) chloride and trimesic acid (1,3,5-benzene tricarboxylic acid, BTC) as an organic linker in a short and simple method, providing a MOF in which the drug is a part of the constituent.

New insights into the degradation mechanism of metal-organic frameworks drug carriers

A versatile method based on Raman microscopy was developed to follow the degradation of iron carboxylate Metal Organic Framework (MOF) nano- or micro-particles in simulated body fluid (phosphate buffer). The analysis of both the morphology and chemical composition of individual particles, including observation at different regions on the same particle, evidenced the formation of a sharp erosion front during particle degradation. Interestingly, this front separated an intact non eroded crystalline core from an amorphous shell made of an inorganic network. According to Mössbauer spectrometry investigations, the shell consists essentially of iron phosphates. Noteworthy, neither drug loading nor surface modification affected the integrity of the tridimensional MOF network. These findings could be of interest in the further development of next generations of MOF drug carriers.

Metal organic frameworks as a drug delivery system for flurbiprofen

BACKGROUND

Metal organic frameworks (MOFs) have attracted more attention in the last decade because of a suitable pore size, large surface area, and high pore volume. Developing biocompatible MOFs such as the MIL family as a drug delivery system is possible.

PURPOSE

Flurbiprofen (FBP), a nonsteroidal anti-inflammatory agent, is practically insoluble in aqueous solution, and, therefore, needs suitable drug delivery systems. Different biocompatible MOFs such as Ca-MOF and Fe-MILs (53, 100, and 101) were synthesized and employed for FBP delivery.

PATIENTS AND METHODS

A sample of 50 mg of each MOF was mixed and stirred for 24 h with 10 mL of 5 mg FBP in acetonitrile (40%) in a sealed container. The supernatant of the mixture after centrifuging was analyzed by high-performance liquid chromatography to determine the loaded quantity of FBP on the MOF. The overnight-dried solid material after centrifuging the mixture was analyzed for loading percent using X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, nuclear magnetic resonance, and FBP release profile.

RESULTS

The loading values of FBP were achieved at 10.0%±1%, 20%±0.8%, 37%±2.3%, and 46%±3.1% on Ca-MOF, Fe-MIL-53, Fe-MIL-101, and Fe-MIL-100, respectively. The FBP release profiles were investigated in a phosphate buffer solution at pH 7.4. The total release of the FBP after 2 days was obtained at 72.9, 75.2, 78.3, and 90.3% for Ca-MOF, Fe-MIL-100, Fe-MIL-53, and Fe-MIL-101, respectively.

CONCLUSION

The MOFs are shown to be a promising drug delivery option for FBP with a significant loading percent and relatively prolonged drug release.

NanoMIL-100(Fe) containing docetaxel for breast cancer therapy

Metal-organic frameworks, such as MIL-100, have been recently introduced as promising drug carriers due to their notable characteristics such as stability, biocompatibility and owning large porosity which may admit a broad range of drugs with different molecular sizes. In this study, we firstly proposed an accessible top-down approach using ultrasound method to prepare nanoMIL-100 and secondly, evaluated its potentials as an anticancer nanocarrier. This is the first report that docetaxel (DTX) as a highly hydrophobic anticancer drug was encapsulated in nanoMIL-100 with the drug payload of 57.2 wt%. Characterizations of the prepared nanoMIL-100 and DTX-loaded nanoMIL-100 were performed by PXRD, FT-IR, N₂ adsorption, DLS and FE-SEM. Moreover, the drug loading and release processes were quantified by HPLC. The in vitro release of DTX from the prepared nanocarrier was investigated in two pH values, 7.4 and 5.5. The toxic effect of DTX-loaded nanoMIL-100 was examined on human breast cancer cell line, MCF-7, and a significant decrease was observed in IC₅₀ value (0.198 μg/mL) at the first 24 h in comparison with the free drug (4.9908 μg/mL). This nanocarrier may, thus offer promising potentials as a novel cytotoxic drug delivery system.

Composite CD-MOF nanocrystals-containing microspheres for sustained drug delivery

Metal-organic frameworks (MOFs), which are typically embedded in polymer matrices as composites, are emerging as a new class of carriers for sustained drug delivery. Most of the MOFs and the polymers used so far in these composites, however, are not pharmaceutically acceptable. In the investigation reported herein, composites of γ-cyclodextrin (γ-CD)-based MOFs (CD-MOFs) and polyacrylic acid (PAA) were prepared by a solid in oil-in-oil (s/o/o) emulsifying solvent evaporation method. A modified hydrothermal protocol has been established which produces efficiently at 50 °C in 6 h micron (5-10 μm) and nanometer (500-700 nm) diameter CD-MOF particles of uniform size with smooth surfaces and powder X-ray diffraction patterns that are identical with those reported in the literature. Ibuprofen (IBU) and Lansoprazole (LPZ), both insoluble in water and lacking in stability, were entrapped with high drug loading in nanometer-sized CD-MOFs by co-crystallisation (that is more effective than impregnation) without causing MOF crystal degradation during the loading process. On account of the good dispersion of drug-loaded CD-MOF nanocrystals inside polyacrylic acid (PAA) matrices and the homogeneous distribution of the drug molecules within these crystals, the composite microspheres exhibit not only spherical shapes and sustained drug release over a prolonged period of time, but they also demonstrate reduced cell toxicity. The cumulative release rate for IBU (and LPZ) follows the trend: IBU-γ-CD complex microspheres (ca. 80% in 2 h) > IBU microspheres > IBU-CD-MOF/PAA composite microspheres (ca. 50% in 24 h). Importantly, no burst release of IBU (and LPZ) was observed from the CD-MOF/PAA composite microspheres, suggesting an even distribution of the drug as well as strong drug carrier interactions inside the CD-MOF. In summary, these composite microspheres, composed of CD-MOF nanocrystals embedded in a biocompatible polymer (PAA) matrix, constitute an efficient and pharmaceutically acceptable MOF-based carrier for sustained drug release.

A hydrostable anionic zinc-organic framework carrier with a bcu topology for drug delivery

A hydrostable anionic zinc-organic open framework with a bcu topology was synthesized based on 2,5-furandicarboxylate ligand by a solvothermal process and exhibited a 17.2 wt% 5-fluorouracil payload, constituting a negligible cytotoxicity effect.

Efficient "green" encapsulation of a highly hydrophilic anticancer drug in metal-organic framework nanoparticles

Metal-organic frameworks (MOFs) are coordination polymers of interest for biomedical applications. Of particular importance, nanoparticles made of iron(III) trimesate (MIL-100, MIL standing for Material Institut Lavoisier) (nanoMOFs) can be conveniently synthesised under mild and green conditions. They were shown to be biodegradable, biocompatible and efficient to encapsulate a variety of active molecules. We have addressed here the challenges to encapsulate a highly hydrophilic anticancer prodrug, phosphated gemcitabin (Gem-MP) known for its instability and inability to bypass cell membranes. MIL-100 nanoMOFs acted as efficient "nanosponges", soaking Gem-MP from its aqueous solution with almost perfect efficiency (>98%). Maximal loadings reached ∼30 wt% reflecting the strong interaction between the drug and the iron trimesate matrices. Neither degradation nor loss of crystalline structure was observed after the loading process. Storage of the loaded nanoMOFs in water did not result in drug release over three days. However, Gem-MP was released in media containing phosphates, as a consequence to particle degradation. Drug-loaded nanoMOFs were effective against pancreatic PANC-1 cells, in contrast to free drug and empty nanoMOFs. However, an efflux phenomenon could contribute to reduce the efficacy of the nanocarriers. Size optimization and surface modification of the nanoMOFs are expected to further improve these findings.

Fe-MIL-101 exhibits selective cytotoxicity and inhibition of angiogenesis in ovarian cancer cells via downregulation of MMP

Though metal-organic frameworks (MOFs) have inspired potential applications in biomedicine, cytotoxicity studies of MOFs have been relatively rare. Here we demonstrate for the first time that an easily available MOF, Fe-MIL-101, possesses intrinsic activity against human SKOV3 ovarian cancer cells and suppress the proliferation of SKOV3 cells (IC50 = 23.6 μg mL(-1)) and normal mouse embryonic fibroblasts (BABL-3T3, IC50 = 78.3 μg mL(-1)) cells. It was more effective against SKOV3 cells than typical anticancer drugs such as artesunate (ART, IC50 = 96.9 μg mL(-1)) and oxaliplatin (OXA, IC50 = 64.4 μg mL(-1)), but had less effect on normal BABL-3T3 cells compared with ART (IC50 = 36.6 μg mL(-1)) and OXA (IC50 = 13.8 μg mL(-1)). Fe-MIL-101 induced apoptosis of human umbilical vein endothelial cells (HUVECs) via G0/G1 cell cycle arrest and decreased the mitochondrial membrane potential in HUVECs and induced apoptosis. Furthermore, Fe-MIL-101 exhibited stronger antiangiogenic effects in HUVEC cells than antiangiogenic inhibitor (SU5416) via downregulation the expression of MMP-2/9. Our results reveal a new role of Fe-MIL-101 as a novel, non-toxic anti-angiogenic agent that restricted ovarian tumour growth. These findings could open a new avenue of using MOFs as potential therapeutics in angiogenesis-dependent diseases, including ovarian cancer.