An experimental teeth bleaching agent containing casein phosphopeptide-amorphous calcium phosphate

OBJECTIVES

This study was aimed to obtain an experimental bleaching agent by adding casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) in order to eliminate the mineral loss on the tooth surface after bleaching and to evaluate the bleaching effectiveness.

MATERIALS AND METHODS

In this study, experimental bleaching agents containing 1%, 3% CPP-ACP and without CPP-ACP were obtained. Bleaching effectiveness (color change), the effect of bleaching agents on mineral content (energy dispersive x-ray spectroscopy), surface morphology (scanning electron microscope), and surface hardness of enamel (Vicker's microhardness) before and after bleaching were evaluated. The obtained data were statistically analyzed.

RESULTS

When the bleaching levels of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05) while the addition of 3% CPP-ACP decreased significantly the effectiveness of the bleaching agent (p < 0.05). When the effects of experimental bleaching agents on surface hardness were examined, while the enamel surface hardness decreased statistically significantly after application in the control group (p < 0.05), no statistically significant change was observed in surface hardness after the application of 1% CPP-ACP containing bleaching agent (p > 0.05). However, a statistically significant increase was observed in surface hardness after the application of 3% CPP-ACP containing bleaching agent (p < 0.05). When the Ca and P ratio of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05), while they increased significantly in 3% CPP-ACP group (p < 0.05).

CONCLUSIONS

The addition of 1% CPP-ACP to the bleaching agent had positive effects on the mineral content and surface hardness of the enamel, and did not negatively affect the whitening effectiveness.

CLINICAL SIGNIFICANCE

Adding CPP-ACP to the bleaching agent at appropriate concentrations can eliminate possible negative effects without compromising the effectiveness of the bleaching agent.

The Wear Behavior of Glass-Ceramic CAD/CAM Blocks against Bovine Enamel

The wear of enamel and crown restorative materials often occur by occlusion. The purpose of this study was to evaluate the wear volume between glass-ceramics used for CAD/CAM blocks (lithium disilicate: Initial LiSi block (LIS), IPS e.max CAD (IPS), zirconia-reinforced lithium silicate glass-ceramics: Celtra DUO (DUO), VITA Suprinity (VITS) and feldspar-based glass-ceramics: Vitablocs Mark II (MAK)) and bovine tooth enamel using a two-body wear test, the hardness, three-point bending strength, micro-structure and the element components of glass-ceramics. The data were analyzed using a one-way analysis of variance and Tukey's multiple comparison test (α = 0.05). IPS and DUO with relatively large size crystal gain had significantly larger abrader wear volumes. Zirconia-reinforced lithium silicate glass-ceramics (DUO, VITS) caused significantly greater wear volume in antagonist enamel. MAK with scale-shape crystals grains produced distinct scratches after wear tests, both in the material itself and in the enamel. A strong correlation between the mechanical properties (hardness, three-point bending strength) and wear volume could not be confirmed. The type of glass-ceramic, size, and shape of the crystal grains affected the wear behavior of the glass-ceramics for CAD/CAM blocks. Therefore, dentists should consider that wear behavior varies with crystal structure, size, and shape in glass-ceramics for CAD/CAM blocks.

The micro-shear bond strength of resin cements to aged laser bleached enamel after using different desensitizing agents

OBJECTIVES

To evaluate the micro-shear bond strength of two resin cements to aged laser bleached enamel after the application of three different desensitizing agents.

MATERIALS AND METHODS

Forty extracted human central and lateral incisors were prepared and bleached using laser activation bleaching protocol. The teeth were assigned randomly into four groups for desensitization; G1: No post-bleaching treatment, G2: GC MI Paste Plus, G3: Hydroxyapatite nanoparticles (n-HAP) and G4: Flor-Opal. Specimens were subjected to aging for 6 months. All groups were subdivided into two subgroups according to the resin cements used (dual-curing resin cement and light-curing resin cement).

RESULTS

Flor-Opal groups showed the highest statistically significant micro-shear bond strength (MSBS), followed by GC MI Paste Plus and n-HAP groups with no statistically significant difference between them. The light-curing resin cement had statistically higher MSBS than dual-curing resin cement in case of no-post bleaching treatment and n-HAP groups, and no statistical difference in case of GC MI Paste Plus and Flor-Opal groups.

CONCLUSION

Usage of desensitizing agents containing, CPP-ACP, n-HAP or fluoride after laser bleaching can enhance the bond strength of the resin cements to enamel.

CLINICAL SIGNIFICANCE

The composition of the desensitizing agents applied after laser bleaching could interfere in bond strength values.

Does overlay preparation design affect polymerization shrinkage stress distribution? A 3D FEA study

This study evaluated the polymerization shrinkage stress of three tooth preparation designs for indirect ceramic overlay by finite element analysis: isthmus preparation (IST); without isthmus preparation (wIST); and non-retentive preparation (nRET). The models were created based in prepared dental typodonts and were digitally impressed with an intraoral scanner. The interfaces in all models were considered perfectly bonded and all materials were considered homogeneous, linear, and isotropic. The polymerization shrinkage of the cement layer (100 µm) was simulated and evaluated by maximum principal stress criteria. The stress peaks followed this sequence: restoration = IST (13.4 MPa) > wIST (9.3 MPa) > nRET (9 MPa); cement layer = IST (16.9 MPa) > wIST (12.6 MPa) > nRET (10-7.5 MPa); and teeth = IST (10.7 MPa) > wIST (10.5 MPa) > (9 MPa). For the cement layer, the non-retentive preparation (nRET) had the lowest shrinkage stress from all the groups, obtaining a more homogeneous stress distribution on the cement surface. Regarding the abutment teeth, the IST generated a higher shrinkage stress area on the dental structure, concentrating higher stress magnitude at the axiopulpar and axiogingival angles. Non-retentive preparation seems to reduce polymerization shrinkage stress.

Effect of Prior Application of Desensitizing Agent on the Teeth Submitted to In-Office Bleaching

This study aimed to quantify the penetration of hydrogen peroxide, color change evaluation, surface morphology, and composition after application of desensitizing agents before in-office bleaching. Fifty premolars were sectioned, an acetate buffer was placed in the pulp chamber and divided into five groups (n=10). In the positive control group, only the in-office bleaching gel was used, and in the negative control group, no treatment was used. Three different desensitizing agents were applied: Desensibilize KF2%® group; Mi Paste® group, and Desensibilize Nano-P® group. The bleaching procedure was carried out with 35% HP. The absorbance of the resulting solution was determined in a spectrophotometer. Color change was assessed by using a digital spectrophotometer. Four additional premolars were assigned to the same groups above for analysis under scanning electron microscope, as well as to evaluate the elemental composition with X-ray dispersive energy spectrometry. Data were subjected to ANOVA and Tukey's test (α=0.05). All products reduced the penetration of HP in the pulp chamber. Mi Paste and Nano P were the products that yielded the lowest HP penetration, which was similar to the negative control group (p<0.001). No significant difference was detected in color change (p<0.001). Concerning enamel morphology, the groups that were analyzed after bleaching were observed a greater deposition of desensitizing agents on the surface. The use of desensitizing agents before tooth bleaching seems to be an alternative to reduce adverse effects of the tooth.

Influence of various antioxidants on micro-shear bond strength of resin composite to bleached enamel

OBJECTIVE

Teeth bleaching causes an immediate decrease in resin composite bonding ability. This study aimed to investigate the influence of various antioxidants on resin composite bond strength to bleached enamel.

MATERIALS AND METHODS

One hundred and ten human maxillary incisors were used. A negative control (group A) (n = 10) was assigned (no bleaching-no antioxidant). The remaining teeth were divided into two groups (n = 50) according to the bleaching agent used: group B (40% hydrogen peroxide) and group C (35% carbamide peroxide). Both groups were subdivided into five subgroups (n = 10). A positive control subgroup (no antioxidant) and other four subgroups according to the antioxidant solution used (10% sodium ascorbate, 10% grape seed extract, 10% green tea extract, and 5% alpha-lipoic acid). After resin composite building, the micro-shear bond strength test was performed. Fracture analysis was examined using a stereomicroscope. Statistical analysis was performed using a two-way analysis of variance and Tukey's HSD post hoc test.

RESULTS

Bond strength significantly decreased after bleaching and there was no significant difference between bleaching agents (P < .0848). Except for alpha-lipoic acid subgroups, the other antioxidants subgroups revealed significantly higher bond strengths than bleached control subgroups (P < .0001).

CONCLUSION

All antioxidants used except alpha-lipoic acid were effective in the reversal of compromised bonding after bleaching.

CLINICAL SIGNIFICANCE

Immediate bonding procedures after bleaching are requisite when bleaching fails to treat teeth discoloration and the direct composite veneer is considered, also when shades of old composite restorations become mismatched after bleaching and should be replaced. Immediate reestablishment of resin bond strengths after bleaching can be achieved by using several antioxidants without the need for delay.

Influence of Prolonged Dental Bleaching on the Adhesive Bond Strength to Enamel Surfaces

The objective of this in vitro study was to assess the influence of prolonged bleaching pre- and postrestoration on the bond strength (microshear) to enamel using 4% hydrogen peroxide (PH4). In the postrestorative bleached specimens evaluation, the composite cylinders were assembled after bleaching, while in the prebleached specimens, the cylinders were assembled before. Therefore, in the postbleached specimens, 60 bovine teeth were randomly assigned as follows: G1: control; G2: 14 days bleaching before bond strength (BS) testing; G3: 21 days; and G4: 28 days. In prebleached specimens, 180 bovine teeth were randomly assigned as follows: G1: control; G5: 14 days bleaching, storage in artificial saliva (AS) for 24 h before BS testing; G6: 14 days beaching, AS storage for 7 days before BS testing; G7: 21 days bleaching, AS storage for 24  h before BS testing; G8: 21 days bleaching, AS storage for 7 days before BS testing; G9: 28 days bleaching, AS storage for 24 hours before BS testing; and G10 : 28 days bleaching, AS storage for 7 days before BS testing. The results were submitted to ANOVA one-way (postrestoration bleaching) and two-way (prerestoration bleaching) and Tukey's post hoc test (p ≤ 0.05). In the postrestoration bleaching, no statistical difference between times was found. However, when bleached groups were compared to the control (G1), an expressive difference was detected (p ≤ 0.0001). For prerestoration bleaching, all experimental groups were statistically different from G1 (p ≤ 0.05), except G6 (p ≥ 0.01), and for G5 and G6, statistical differences were found (p ≤ 0.01). There were no significant differences between G7 and G8 and between G9 and G10, regardless of the AS storage times (p ≥ 0.05). It was concluded that prolonged bleaching with PH4 decreased adhesion resistance regardless of the moment of the bleaching (post- and prerestoration bleaching).

Bleaching gel mixed with MI Paste Plus reduces penetration of H2O2 and damage to pulp tissue and maintains bleaching effectiveness

OBJECTIVES

MI Paste Plus remineralizer (Rem) strengthens dental structures after bleaching. We investigated the effect of Rem on the penetration of hydrogen peroxide (H₂O₂), bleaching effectiveness, and pulp inflammation after bleaching.

MATERIALS AND METHODS

Bovine disks were grouped as follows (n = 10): control (untreated), bleached (Ble; 35% H₂O₂, 30 min), Ble-Rem (H₂O₂ followed by Rem, 30 min), Rem-Ble (Rem followed by H₂O₂), Rem-Ble-Rem (Rem before and after H₂O₂), and Ble+Rem (mixture of Rem with H₂O₂, 1:1, 30 min). The penetration of H₂O₂ was quantified and bleaching efficacy was analyzed. Upper rat molars (n = 10) received the same treatments at random. The rats were euthanized after two days and 30 days, and their jaws were removed for histological analysis. Statistical tests were performed (P < 0.05).

RESULTS

The bleached groups, except Ble+Rem (P > 0.05), showed significant H₂O₂ penetration compared with control (P < 0.05). Color alteration analysis showed that ΔL and ΔE were significantly higher in the bleached groups than those in control (P < 0.05); the Δb of the bleached groups differed from that of control at 24 h (P < 0.05). At two days, necrosis or inflammation was observed in the bleached groups compared with control (P < 0.05), except Ble+Rem, which was similar to control (P > 0.05). At 30 days, tertiary dentin formation was significant in the bleached groups (P < 0.05), except Ble+Rem (P > 0.05).

CONCLUSION

The mixture of MI Paste Plus and bleaching gel reduces H₂O₂ penetration and pulp damage and maintains bleaching effectiveness.

CLINICAL RELEVANCE

Because bleaching can damage dental tissues, we studied a new bleaching protocol that reduces damage to the pulp tissue while maintaining bleaching efficiency: a single application of 30 min of MI Paste Plus mixed with 35% H₂O₂ bleaching gel (1:1).

Randomized clinical trial of the effect of NovaMin and CPP-ACPF in combination with dental bleaching

OBJECTIVE

This randomized, controlled, double-blind clinical study evaluated the effect of calcium sodium phosphosilicate (NovaMin) and casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) on the prevention of post-operative sensitivity and on the effects of clinical bleaching treatment.

MATERIAL AND METHODS

Sixty volunteers were selected according to inclusion and exclusion criteria and were randomly assigned into three groups (n=20): CG (control group) patients, who were treated with 35% hydrogen peroxide; NOVAG (NovaMin group) patients, who were treated with 35% hydrogen peroxide followed by the application of NovaMin; and CPPG (CPP group) patients, who were treated with 35% hydrogen peroxide followed by the application of CPP-ACPF. Both bioactive agents were applied for five minutes. An evaporative stimulus associated with a modified visual scale was used to analyze sensitivity 24 hours after each bleaching session. The color evaluation was performed on the maxillary central incisors using a spectrophotometer. Associations between the intervention group, bleaching session, and reported sensitivity were tested using Chi-square partitioning.

RESULTS

Color change values (ΔE) were analyzed using analysis of variance (ANOVA). The significance level used for both tests was 5%. In the intragroup assessment, the Friedman test showed that only the CPP-ACPF group showed no statistically significant difference (p<0.05) between baseline and first bleaching session. In the intergroup assessment, the Kruskal-Wallis test showed that the CPPG had less postoperative sensitivity after the first session, when compared to the other groups (p<0.05). Color change analysis (ΔE) showed a significant difference between the means obtained in the different bleaching sessions in all groups (p<0.05).

CONCLUSIONS

This study showed that the combination of CPP-ACPF with 35% hydrogen peroxide significantly reduced post-operative sensitivity in the first session, compared with the other evaluated treatments. The association of CPP-ACPF and NovaMin did not affect the color change induced by tooth bleaching.

Effect of tooth whitening strips on fatigue resistance and flexural strength of bovine dentin in vitro

Objective

To determine the effects of whitening strips on bovine dentin fatigue resistance and flexural strength in vitro.

Materials and methods

A total of eighty bovine dentin specimens (2x2x17mm) were treated with either: control glycerine gel on plastic film wrap or whitening strips containing 9.5% hydrogen peroxide. Treatment was applied for 30 minutes, twice a day, for 1- or 4-weeks. After the last treatment, ten specimens per group were randomly selected to undergo fatigue testing (10⁶ cycles, 3Hz, 20N) while the other ten were subjected to flexural strength testing after ten days of storage in artificial saliva. Kaplan-Meier method with a log rank test, Wilcoxon test and Cox regression were used to assess fatigue test results (p<0.05). One-way ANOVA and Tukey’s tests were used to compare the flexural strength results (p<0.05).

Results

There were significant differences in survival during the fatigue test among the groups (p<0.001). Treatment (control or bleach) was a significant factor for specimen survival (p<0.001, Exp(B) = 33.45). There were significant differences in mean flexural strength (p<0.001). No significant difference was found between “1-wk control” and “4-wk control”. The mean flexural strength and fatigue resistance of the “4-wk bleach” were significantly lower than all the other groups.

Conclusions

The use of whitening strips reduced the fatigue resistance and flexural strength of bovine dentin in vitro. Until the effect of whitening strips on mechanical properties of human dentin is fully elucidated, it remains prudent to advise patients to avoid excessive direct use of whitening strips on dentin.

The effect of two remineralizing agents and natural saliva on bleached enamel hardness

BACKGROUND

In order to compensate the adverse consequences of bleaching agents, the use of fluoride-containing remineralizing agents has been suggested by many researchers. The aim of this study was to compare the effect of applying two remineralizing materials on bleached enamel hardness and in comparison to natural saliva.

MATERIALS AND METHODS

In this experimental study, 30 enamel samples of sound human permanent molars were prepared for this study. Microhardness (MH) of all specimens was measured and 35% hydrogen peroxide was applied 3 times to the specimens. After completion of the bleaching process, MH of samples was measured and then enamel specimens were divided into three groups each of 10, specimens of groups 1 and 2 were subjected to daily application of hydroxyl apatite (Remin Pro) and casein phosphopeptide amorphous calcium phosphate fluoride (CPP-ACPF) (MI Paste Plus) pastes, respectively, for 15 days. In group 3, the specimens were stored in the operators' natural saliva at room temperature in this period of time. Final MH of all groups was measured. The data were analyzed using repeated measures ANOVA (α = 0.05).

RESULTS

The hardness significantly decreased in all groups following bleaching. Application of either Remin Pro, CPP-ACPF or natural saliva increased the hardness significantly. The hardness of the three test groups after 15 days were statistically similar to each other.

CONCLUSION

The hardness of enamel increases eventually after exposure to either MI Paste Plus, Remin Pro or natural saliva.

Influence of Restoration Type on the Cytotoxicity of a 35% Hydrogen Peroxide Bleaching Gel

OBJECTIVES

The tooth/restoration interface may act as a pathway for hydrogen peroxide (H2O2) diffusion into the pulp chamber. Therefore, the influence of resin-modified glass ionomer cement (RMGIC) and resin composite simulated restorations on the cytotoxicity of an in-office bleaching gel was assessed in vitro.

MATERIALS AND METHODS

Cavities in enamel/dentin discs restored with RMGIC Vitremer (3M ESPE) or Single Bond/Filtek Z350 (3M ESPE) resin composite (RC) were subjected or not subjected to hydrolytic degradation (HD). A 35%-H2O2 bleaching gel was applied to simulated restored and nonrestored enamel surfaces, and culture medium in contact with the dentin substrate (extract) was collected and applied to MDPC-23 cells. Nonrestored discs subjected or not subjected to bleaching were used as positive and negative controls, respectively. Cell viability, oxidative stress, interleukin (IL)-1β expression, alkaline phosphatase (ALP) activity, and mineralized nodule deposition were evaluated. The H2O2 in the extracts was quantified. Data were subjected to statistical analysis.

RESULTS

Higher oxidative stress associated with reduced cell viability, ALP activity, and mineralized nodule deposition was observed for all bleached groups compared with the negative control group. The RMGIC/HD group, which presented the highest H2O2 diffusion, had the lowest values of cell viability, ALP activity, and mineralized nodule deposition, as well as significantly increased IL-1β expression.

CONCLUSIONS

Dental cavities restored with the RMGIC subjected to hydrolytic degradation allowed for more intense diffusion of H2O2 into the pulp chamber, intensifying the toxicity of a 35%-H2O2 bleaching gel to pulp cells.

Effect of Sodium Ascorbate on Dentin Bonding After Two Bleaching Techniques

The purpose of this study was to analyze the influence of 10% sodium ascorbate (SA) on the hybrid layer, resin tag length, and bond strength to dentin after bleaching. Six groups were tested: G C, control; G SA, sodium ascorbate (SA) + restoration; G CP, bleaching with carbamide peroxide (CP) + restoration; G CP+SA, bleaching with CP + SA+ restoration; G HP, bleaching with 35% hydrogen peroxide (HP) + restoration; and G HP+SA, HP + SA + restoration. After dental bleaching, the dentin was exposed and the antioxidant solution was applied to groups G SA, G CP+SA, and G HP+SA, before bonding procedures. The teeth were sectioned in the mesiodistal direction. One section was decalcified, and the specimens were embedded in paraffin and sectioned in the longitudinal direction with a thickness of 6 μm. Fifteen slices of each specimen were selected according to a systematic sample of slices with an interval proportional to the total number of slices obtained for each tooth. The specimens were stained using the Brown & Brenn method, and an optic microscope was used to analyze the hybrid layer thickness and resin tag length. The remaining tooth segment was sectioned into stick-shaped specimens and used for microtensile bond strength testing (0.5 mm/min). Statistical analysis was performed using two-way analysis of variance and Fisher test. The results for hybrid layer + tag formation (in micrometers) were G C, 13.27 Aa; G SA, 11.85 Ba; G CP, 6.84 Bb; G CP+SA, 9.02 Ab; G HP, 7.28 Bb; and G HP+SA, 9.22 Ab; bond strength results (in MPa) were G C, 49.5 Aa; G SA, 51.7 Aa; G CP, 37.16 Bb; G CP+SA, 47.69 Aa; G HP, 32.39 Ab; and G HP+SA, 39.67 Ab. Tooth bleaching with CP or HP impairs the formation of the hybrid layer and resin tags and reduces the microtensile bond strength. Statistically, the use of SA significantly increases the hybrid layer thickness and resin tag length. The microtensile bond strength values for carbamide peroxide increased, but the microtensile bond strength for hydrogen peroxide was not affected.