An experimental teeth bleaching agent containing casein phosphopeptide-amorphous calcium phosphate

OBJECTIVES

This study was aimed to obtain an experimental bleaching agent by adding casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) in order to eliminate the mineral loss on the tooth surface after bleaching and to evaluate the bleaching effectiveness.

MATERIALS AND METHODS

In this study, experimental bleaching agents containing 1%, 3% CPP-ACP and without CPP-ACP were obtained. Bleaching effectiveness (color change), the effect of bleaching agents on mineral content (energy dispersive x-ray spectroscopy), surface morphology (scanning electron microscope), and surface hardness of enamel (Vicker's microhardness) before and after bleaching were evaluated. The obtained data were statistically analyzed.

RESULTS

When the bleaching levels of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05) while the addition of 3% CPP-ACP decreased significantly the effectiveness of the bleaching agent (p < 0.05). When the effects of experimental bleaching agents on surface hardness were examined, while the enamel surface hardness decreased statistically significantly after application in the control group (p < 0.05), no statistically significant change was observed in surface hardness after the application of 1% CPP-ACP containing bleaching agent (p > 0.05). However, a statistically significant increase was observed in surface hardness after the application of 3% CPP-ACP containing bleaching agent (p < 0.05). When the Ca and P ratio of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05), while they increased significantly in 3% CPP-ACP group (p < 0.05).

CONCLUSIONS

The addition of 1% CPP-ACP to the bleaching agent had positive effects on the mineral content and surface hardness of the enamel, and did not negatively affect the whitening effectiveness.

CLINICAL SIGNIFICANCE

Adding CPP-ACP to the bleaching agent at appropriate concentrations can eliminate possible negative effects without compromising the effectiveness of the bleaching agent.

Evaluation of drug release, monomer conversion and surface properties of resin composites containing chlorhexidine-loaded mesoporous and nonporous hydroxyapatite nanocarriers

The aim of this study was to evaluate drug release, degree of conversion (DC), and surface properties of resin composites containing chlorhexidine (CHX)-loaded mesoporous (mHAP) and nonporous hydroxyapatite (HAP) nanocarrier. CHX loaded mHAP and HAP, or CHX without nanocarrier was added into the resin composite in 1% and 5% concentrations. After characterization of experimental materials with XRD, EDX, FT-IR, and SEM, the CHX release on the 1st, 7th, 30th, and 120th days were evaluated by UV-vis spectroscopy. DC, surface roughness, and surface hardness of the samples were also evaluated. The data was statistically analyzed. While mHAP groups released significantly higher CHX on the 30th day (p < .05), there was no statistically significant difference between the HAP and mHAP groups on the 120th day (p > .05). DCs of all groups were similar (p > .05). While mHAP and HAP groups containing 5% CHX showed significantly higher roughness than the other groups (p < .05), no statistically significant difference was observed between the other groups (p > .05). The 1% and 5% CHX groups without nanocarrier showed significantly lower surface hardness (p < .05). However, no statistically significant difference was observed between the other groups in terms of surface hardness (p > .05). A controlled CHX release was achieved by mHAP and HAP nanocarriers for 120 days. The nanocarrier addition up to 5% did not negatively affect the DC and the surface hardness which is one of the surface properties of the resin composites. Although the addition of 5% nanocarrier to the resin composite increased the surface roughness, while adding 1% of these nanocarriers did not change.

Evaluation of six different one-step universal adhesive systems in terms of dentin bond strength, adhesive interface characterization, surface tension, contact angle, degree of conversion and solvent evaporation after immediate and delayed use

OBJECTIVES

In this study, it was aimed to investigate the effects of different waiting periods on resin-dentin bond strength (BS), degree of conversion (DC), contact angle (CA), surface tension (ST), solvent evaporation (weight loss) and the characteristics of adhesive interfaces of the current six universal adhesive resins (ARs).

MATERIALS AND METHODS

A total of 216 caries-free human lower third molar teeth were used. Composite resin restorations were performed by applying six universal ARs in etch-and-rinse and self-etch mode on standardized dentin surfaces after 0, 5, and 30 min waiting time. Then, a micro-shear BS test, SEM examination and characterization of the adhesive interface were performed. In addition, DC, CA, ST, solvent evaporation of all tested ARs were evaluated.

RESULTS

The obtained data were statistically anaIyzed. The tested ARs did not show any statistical difference between 0 and 5 min evaluations in all parameters evaluated except for weight loss (p > 0.05). While the weight loss, ST and CA of all ARs increased in 30 min (p < 0.05), the BS, DC, thickness of the adhesive layer and the hybrid layer, resin tag length and number of resin tags varied according to the ARs used. When the ARs were used in etch-and-rinse mode, all the parameters evaluated also varied according to the AR used. Higher adhesive layer thickness and lower hybrid layer thickness were found in the self-etch mode (p < 0.05).

CONCLUSIONS

All of the adhesives tested can be safely used up to 30 min. This could also prevent economical loss caused by waste adhesive material.

CLINICAL SIGNIFICANCE

It is important to know how the bond strength, degree of conversion, adhesion, contact angle and surface tension properties of the adhesive resin waiting in the dispensing cup for a long time during clinical use are affected to make ideal restorations.

The effect of two different prophylaxis paste applying processes on color stability in-office bleaching: 24-month clinical follow-up

OBJECTIVE

The purpose of this study was to examine the effect of applying two different prophylaxis pastes with various protocols on the degree of bleaching and color stability in the office bleaching process with a bleaching agent containing 40% hydrogen peroxide.

MATERIAL AND METHOD

The 300 teeth of 15 (9 female, 6 male) patients were included in our study, and 5 different study groups were randomly formed. The bleaching process with Ultradent Opalescence Boost (Ultradent, South Jordan, USA) was performed according to the manufacturer's instructions. Two different prophylaxis pastes, Ultrapro (Ultradent, Cologne, Germany) and Cleanic (Kerr, Rastatt, Germany), were applied with protocols determined according to the groups. The effect on color stability at 6-, 12-, and 24-month follow-up was determined using the CIE L* a* b* color system. The changes in the parameters were analyzed using the one-way ANOVA, chi-square, and Tukey test (p > 0.05).

RESULTS

The evaluation rate of the treatments was 100% at the end of 24 months. Control group 6-month ΔE (0-6) and 12-month ΔE (0-12) values were higher than 24-month ΔE (0-12) values. UU + UU, KC + KC, and UU group 6-month ΔE (0-6) values were higher than 12-month ΔE (0-12) values. In addition, 6-month ΔE (0-6) and 12-month ΔE (0-12) values were higher than 24-month ΔE (0-24) values. KC group 6-month ΔE (0-6) and 12-month ΔE (0-12) values were higher than 24-month ΔE (0-24) values. Control, UU + UU, KC + KC, UU, and KC group ΔE (1-6) values at 6 months were lower than 12-month ΔE (1-12) and 24-month ΔE (1-12) values in all groups. In addition, 12-month ΔE (1-12) values were lower than 24-month ΔE (1-24) values. According to the study data, there was no statistically significant difference between the groups according to the prophylaxis paste and prophylaxis procedure (p > 0.05). However, it was observed that whiteness decreased in all groups over time.

CONCLUSIONS

Discoloration was observed at 6 months, 12 months, and 24 months after bleaching. However, at the end of 24 months, the tooth color was significantly whiter than the initial color.

CLINICAL RELEVANCE

Pre-bleaching prophylaxis application and pre-bleaching and post-bleaching prophylaxis application have no effect on color stability.